Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 148 insertions, 0 deletions

diff --git a/drivers/net/dgrs_bcomm.h b/drivers/net/dgrs_bcomm.h
new file mode 100644
index 000000000000..6646608811cd
--- /dev/null
+++ b/drivers/net/dgrs_bcomm.h
@@ -0,0 +1,148 @@
+/*
+ * The bios low-memory structure
+ *
+ * Some of the variables in here can be used to set parameters that
+ * are stored in NVRAM and will retain their old values the next time
+ * the card is brought up.  To use the values stored in NVRAM, the
+ * parameter should be set to "all ones".  This tells the firmware to
+ * use the NVRAM value or a suitable default.  The value that is used
+ * will be stored back into this structure by the firmware.  If the
+ * value of the variable is not "all ones", then that value will be
+ * used and will be stored into NVRAM if it isn't already there.
+ * The variables this applies to are the following:
+ *      Variable        Set to:         Gets default of:
+ *      bc_hashexpire   -1              300     (5 minutes)
+ *      bc_spantree     -1              1       (spanning tree on)
+ *      bc_ipaddr       FF:FF:FF:FF     0       (no SNMP IP address)
+ *      bc_ipxnet       FF:FF:FF:FF     0       (no SNMP IPX net)
+ *      bc_iptrap       FF:FF:FF:FF     0       (no SNMP IP trap address)
+ *
+ * Some variables MUST have their value set after the firmware
+ * is loaded onto the board, but before the processor is released.
+ * These are:
+ *      bc_host         0 means no host "port", run as standalone switch.
+ *                      1 means run as a switch, with a host port. (normal)
+ *                      2 means run as multiple NICs, not as a switch.
+ *                      -1 means run in diagnostics mode.
+ *      bc_nowait
+ *      bc_hostarea_len
+ *      bc_filter_len
+ *                      
+ */
+BEGIN_STRUCT(bios_comm)
+        S4(ulong, bc_intflag)   /* Count of all interrupts */
+        S4(ulong, bc_lbolt)     /* Count of timer interrupts */
+        S4(ulong, bc_maincnt)   /* Count of main loops */
+        S4(ulong, bc_hashcnt)   /* Count of entries in hash table */
+        S4A(ulong, bc_cnt, 8)   /* Misc counters, for debugging */
+        S4A(ulong, bc_flag, 8)  /* Misc flags, for debugging */
+        S4(ulong, bc_memsize)   /* Size of memory */
+        S4(ulong, bc_dcache)    /* Size of working dcache */
+        S4(ulong, bc_icache)    /* Size of working icache */
+        S4(long, bc_status)     /* Firmware status */
+        S1A(char, bc_file, 8)   /* File name of assertion failure */
+        S4(ulong, bc_line)      /* Line # of assertion failure */
+        S4(uchar *, bc_ramstart)
+        S4(uchar *, bc_ramend)
+        S4(uchar *, bc_heapstart) /* Start of heap (end of loaded memory) */
+        S4(uchar *, bc_heapend) /* End of heap */
+
+        /* Configurable Parameters */
+        S4(long, bc_host)       /* 1=Host Port, 0=No Host Port, -1=Test Mode */
+        S4(long, bc_nowait)     /* Don't wait for 2host circ buffer to empty*/
+        S4(long, bc_150ohm)     /* 0 == 100 ohm UTP, 1 == 150 ohm STP */
+        S4(long, bc_squelch)    /* 0 == normal squelch, 1 == reduced squelch */
+        S4(ulong, bc_hashexpire) /* Expiry time in seconds for hash table */
+        S4(long, bc_spantree)   /* 1 == enable IEEE spanning tree */
+
+        S2A(ushort, bc_eaddr, 3) /* New ether address */
+        S2(ushort, bc_dummy1)   /* padding for DOS compilers */
+
+        /* Various debugging aids */
+        S4(long, bc_debug)      /* Debugging is turned on */
+        S4(long, bc_spew)       /* Spew data on port 4 for bs_spew seconds */
+        S4(long, bc_spewlen)    /* Length of spewed data packets */
+        S4(long, bc_maxrfd)     /* If != 0, max number of RFD's to allocate */
+        S4(long, bc_maxrbd)     /* If != 0, max number of RBD's to allocate */
+
+        /* Circular buffers for messages to/from host */
+        S4(ulong, bc_2host_head)
+        S4(ulong, bc_2host_tail)
+        S4(ulong, bc_2host_mask)
+        S1A(char, bc_2host, 0x200)      /* Circ buff to host */
+
+        S4(ulong, bc_2idt_head)
+        S4(ulong, bc_2idt_tail)
+        S4(ulong, bc_2idt_mask)
+        S1A(char, bc_2idt, 0x200)       /* Circ buff to idt */
+
+        /* Pointers to structures for driver access */
+        S4(uchar *, bc_port)    /* pointer to Port[] structures */
+        S4(long, bc_nports)     /* Number of ports */
+        S4(long, bc_portlen)    /* sizeof(PORT) */
+        S4(uchar *, bc_hash)    /* Pointer to hash table */
+        S4(long, bc_hashlen)    /* sizeof(Table) */
+
+        /* SNMP agent addresses */
+        S1A(uchar, bc_ipaddr, 4) /* IP address for SNMP */
+        S1A(uchar, bc_ipxnet, 4) /* IPX net address for SNMP */
+
+        S4(long, bc_nohostintr) /* Do not cause periodic host interrupts */
+
+        S4(uchar *, bc_dmaaddr) /* Physical addr of host DMA buf for diags */
+        S4(ulong, bc_dmalen)    /* Length of DMA buffer 0..2048 */
+
+        /*
+         *      Board memory allocated on startup for use by host, usually
+         *      for the purposes of creating DMA chain descriptors.  The
+         *      "len" must be set before the processor is released.  The
+         *      address of the area is returned in bc_hostarea.  The area
+         *      is guaranteed to be aligned on a 16 byte boundary.
+         */
+        S4(ulong, bc_hostarea_len)      /* RW: Number of bytes to allocate */
+        S4(uchar *, bc_hostarea)        /* RO: Address of allocated memory */
+
+        /*
+         *      Variables for communicating filters into the board
+         */
+        S4(ulong *, bc_filter_area)     /* RO: Space to put filter into */
+        S4(ulong, bc_filter_area_len)   /* RO: Length of area, in bytes */
+        S4(long, bc_filter_cmd)         /* RW: Filter command, see below */
+        S4(ulong, bc_filter_len)        /* RW: Actual length of filter */
+        S4(ulong, bc_filter_port)       /* RW: Port # for filter 0..6 */
+        S4(ulong, bc_filter_num)        /* RW: Filter #, 0=input, 1=output */
+
+        /* more SNMP agent addresses */
+        S1A(uchar, bc_iptrap, 4) /* IP address for SNMP */
+
+        S4A(long, bc_spare, 2)  /* spares */
+END_STRUCT(bios_comm)
+
+#define bc      VMO(struct bios_comm, 0xa3000100)
+
+/*
+ *      bc_status values
+ */
+#define BC_INIT 0
+#define BC_RUN  100
+
+/*
+ *      bc_host values
+ */
+#define BC_DIAGS        -1
+#define BC_SASWITCH     0
+#define BC_SWITCH       1
+#define BC_MULTINIC     2
+
+/*
+ *      Values for spew (debugging)
+ */
+#define BC_SPEW_ENABLE  0x80000000
+
+/*
+ *      filter commands
+ */
+#define BC_FILTER_ERR   -1
+#define BC_FILTER_OK    0
+#define BC_FILTER_SET   1
+#define BC_FILTER_CLR   2