aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/dgrs.c
diff options
context:
space:
mode:
authorNathanael Nerode <neroden@fastmail.fm>2007-09-26 21:14:45 -0400
committerDavid S. Miller <davem@sunset.davemloft.net>2007-10-10 19:53:44 -0400
commitc7e86e344b3599c0679a4a1f59a27953856f181c (patch)
treeda4f2b298bb450d4207d6c785d1118b7c5b92eea /drivers/net/dgrs.c
parent928773c23a4cf053a34ad480439448f75efa350c (diff)
dgrs: remove from build, config, and maintainer list
Stop building and configuring driver for Digi RightSwitch, which was never actually sold to anyone, and remove it from MAINTAINERS. In response to an investigation into the firmware of the "Digi Rightswitch" driver, Andres Salomon discovered: > > Dear Andres: > > After further research, we found that this product was killed in place > and never reached the market. We would like to request that this not be > included. Since the product never reached market, clearly nobody is using this orphaned driver. Signed-off-by: Nathanael Nerode <neroden@gcc.gnu.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net/dgrs.c')
-rw-r--r--drivers/net/dgrs.c1593
1 files changed, 0 insertions, 1593 deletions
diff --git a/drivers/net/dgrs.c b/drivers/net/dgrs.c
deleted file mode 100644
index 054f2ba5f698..000000000000
--- a/drivers/net/dgrs.c
+++ /dev/null
@@ -1,1593 +0,0 @@
1/*
2 * Digi RightSwitch SE-X loadable device driver for Linux
3 *
4 * The RightSwitch is a 4 (EISA) or 6 (PCI) port etherswitch and
5 * a NIC on an internal board.
6 *
7 * Author: Rick Richardson, rick@remotepoint.com
8 * Derived from the SVR4.2 (UnixWare) driver for the same card.
9 *
10 * Copyright 1995-1996 Digi International Inc.
11 *
12 * This software may be used and distributed according to the terms
13 * of the GNU General Public License, incorporated herein by reference.
14 *
15 * For information on purchasing a RightSwitch SE-4 or SE-6
16 * board, please contact Digi's sales department at 1-612-912-3444
17 * or 1-800-DIGIBRD. Outside the U.S., please check our Web page
18 * at http://www.dgii.com for sales offices worldwide.
19 *
20 * OPERATION:
21 * When compiled as a loadable module, this driver can operate
22 * the board as either a 4/6 port switch with a 5th or 7th port
23 * that is a conventional NIC interface as far as the host is
24 * concerned, OR as 4/6 independent NICs. To select multi-NIC
25 * mode, add "nicmode=1" on the insmod load line for the driver.
26 *
27 * This driver uses the "dev" common ethernet device structure
28 * and a private "priv" (dev->priv) structure that contains
29 * mostly DGRS-specific information and statistics. To keep
30 * the code for both the switch mode and the multi-NIC mode
31 * as similar as possible, I have introduced the concept of
32 * "dev0"/"priv0" and "devN"/"privN" pointer pairs in subroutines
33 * where needed. The first pair of pointers points to the
34 * "dev" and "priv" structures of the zeroth (0th) device
35 * interface associated with a board. The second pair of
36 * pointers points to the current (Nth) device interface
37 * for the board: the one for which we are processing data.
38 *
39 * In switch mode, the pairs of pointers are always the same,
40 * that is, dev0 == devN and priv0 == privN. This is just
41 * like previous releases of this driver which did not support
42 * NIC mode.
43 *
44 * In multi-NIC mode, the pairs of pointers may be different.
45 * We use the devN and privN pointers to reference just the
46 * name, port number, and statistics for the current interface.
47 * We use the dev0 and priv0 pointers to access the variables
48 * that control access to the board, such as board address
49 * and simulated 82596 variables. This is because there is
50 * only one "fake" 82596 that serves as the interface to
51 * the board. We do not want to try to keep the variables
52 * associated with this 82596 in sync across all devices.
53 *
54 * This scheme works well. As you will see, except for
55 * initialization, there is very little difference between
56 * the two modes as far as this driver is concerned. On the
57 * receive side in NIC mode, the interrupt *always* comes in on
58 * the 0th interface (dev0/priv0). We then figure out which
59 * real 82596 port it came in on from looking at the "chan"
60 * member that the board firmware adds at the end of each
61 * RBD (a.k.a. TBD). We get the channel number like this:
62 * int chan = ((I596_RBD *) S2H(cbp->xmit.tbdp))->chan;
63 *
64 * On the transmit side in multi-NIC mode, we specify the
65 * output 82596 port by setting the new "dstchan" structure
66 * member that is at the end of the RFD, like this:
67 * priv0->rfdp->dstchan = privN->chan;
68 *
69 * TODO:
70 * - Multi-NIC mode is not yet supported when the driver is linked
71 * into the kernel.
72 * - Better handling of multicast addresses.
73 *
74 * Fixes:
75 * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 11/01/2001
76 * - fix dgrs_found_device wrt checking kmalloc return and
77 * rollbacking the partial steps of the whole process when
78 * one of the devices can't be allocated. Fix SET_MODULE_OWNER
79 * on the loop to use devN instead of repeated calls to dev.
80 *
81 * davej <davej@suse.de> - 9/2/2001
82 * - Enable PCI device before reading ioaddr/irq
83 *
84 */
85
86#include <linux/module.h>
87#include <linux/eisa.h>
88#include <linux/kernel.h>
89#include <linux/string.h>
90#include <linux/delay.h>
91#include <linux/errno.h>
92#include <linux/ioport.h>
93#include <linux/slab.h>
94#include <linux/interrupt.h>
95#include <linux/pci.h>
96#include <linux/init.h>
97#include <linux/netdevice.h>
98#include <linux/etherdevice.h>
99#include <linux/skbuff.h>
100#include <linux/bitops.h>
101
102#include <asm/io.h>
103#include <asm/byteorder.h>
104#include <asm/uaccess.h>
105
106static char version[] __initdata =
107 "$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $";
108
109/*
110 * DGRS include files
111 */
112typedef unsigned char uchar;
113#define vol volatile
114
115#include "dgrs.h"
116#include "dgrs_es4h.h"
117#include "dgrs_plx9060.h"
118#include "dgrs_i82596.h"
119#include "dgrs_ether.h"
120#include "dgrs_asstruct.h"
121#include "dgrs_bcomm.h"
122
123#ifdef CONFIG_PCI
124static struct pci_device_id dgrs_pci_tbl[] = {
125 { SE6_PCI_VENDOR_ID, SE6_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, },
126 { } /* Terminating entry */
127};
128MODULE_DEVICE_TABLE(pci, dgrs_pci_tbl);
129#endif
130
131#ifdef CONFIG_EISA
132static struct eisa_device_id dgrs_eisa_tbl[] = {
133 { "DBI0A01" },
134 { }
135};
136MODULE_DEVICE_TABLE(eisa, dgrs_eisa_tbl);
137#endif
138
139MODULE_LICENSE("GPL");
140
141
142/*
143 * Firmware. Compiled separately for local compilation,
144 * but #included for Linux distribution.
145 */
146#ifndef NOFW
147 #include "dgrs_firmware.c"
148#else
149 extern int dgrs_firmnum;
150 extern char dgrs_firmver[];
151 extern char dgrs_firmdate[];
152 extern uchar dgrs_code[];
153 extern int dgrs_ncode;
154#endif
155
156/*
157 * Linux out*() is backwards from all other operating systems
158 */
159#define OUTB(ADDR, VAL) outb(VAL, ADDR)
160#define OUTW(ADDR, VAL) outw(VAL, ADDR)
161#define OUTL(ADDR, VAL) outl(VAL, ADDR)
162
163/*
164 * Macros to convert switch to host and host to switch addresses
165 * (assumes a local variable priv points to board dependent struct)
166 */
167#define S2H(A) ( ((unsigned long)(A)&0x00ffffff) + priv0->vmem )
168#define S2HN(A) ( ((unsigned long)(A)&0x00ffffff) + privN->vmem )
169#define H2S(A) ( ((char *) (A) - priv0->vmem) + 0xA3000000 )
170
171/*
172 * Convert a switch address to a "safe" address for use with the
173 * PLX 9060 DMA registers and the associated HW kludge that allows
174 * for host access of the DMA registers.
175 */
176#define S2DMA(A) ( (unsigned long)(A) & 0x00ffffff)
177
178/*
179 * "Space.c" variables, now settable from module interface
180 * Use the name below, minus the "dgrs_" prefix. See init_module().
181 */
182static int dgrs_debug = 1;
183static int dgrs_dma = 1;
184static int dgrs_spantree = -1;
185static int dgrs_hashexpire = -1;
186static uchar dgrs_ipaddr[4] = { 0xff, 0xff, 0xff, 0xff};
187static uchar dgrs_iptrap[4] = { 0xff, 0xff, 0xff, 0xff};
188static __u32 dgrs_ipxnet = -1;
189static int dgrs_nicmode;
190
191/*
192 * Private per-board data structure (dev->priv)
193 */
194typedef struct
195{
196 /*
197 * DGRS specific data
198 */
199 char *vmem;
200
201 struct bios_comm *bcomm; /* Firmware BIOS comm structure */
202 PORT *port; /* Ptr to PORT[0] struct in VM */
203 I596_SCB *scbp; /* Ptr to SCB struct in VM */
204 I596_RFD *rfdp; /* Current RFD list */
205 I596_RBD *rbdp; /* Current RBD list */
206
207 volatile int intrcnt; /* Count of interrupts */
208
209 /*
210 * SE-4 (EISA) board variables
211 */
212 uchar is_reg; /* EISA: Value for ES4H_IS reg */
213
214 /*
215 * SE-6 (PCI) board variables
216 *
217 * The PLX "expansion rom" space is used for DMA register
218 * access from the host on the SE-6. These are the physical
219 * and virtual addresses of that space.
220 */
221 ulong plxreg; /* Phys address of PLX chip */
222 char *vplxreg; /* Virtual address of PLX chip */
223 ulong plxdma; /* Phys addr of PLX "expansion rom" */
224 ulong volatile *vplxdma; /* Virtual addr of "expansion rom" */
225 int use_dma; /* Flag: use DMA */
226 DMACHAIN *dmadesc_s; /* area for DMA chains (SW addr.) */
227 DMACHAIN *dmadesc_h; /* area for DMA chains (Host Virtual) */
228
229 /*
230 * Multi-NIC mode variables
231 *
232 * All entries of the devtbl[] array are valid for the 0th
233 * device (i.e. eth0, but not eth1...eth5). devtbl[0] is
234 * valid for all devices (i.e. eth0, eth1, ..., eth5).
235 */
236 int nports; /* Number of physical ports (4 or 6) */
237 int chan; /* Channel # (1-6) for this device */
238 struct net_device *devtbl[6]; /* Ptrs to N device structs */
239
240} DGRS_PRIV;
241
242
243/*
244 * reset or un-reset the IDT processor
245 */
246static void
247proc_reset(struct net_device *dev0, int reset)
248{
249 DGRS_PRIV *priv0 = (DGRS_PRIV *) dev0->priv;
250
251 if (priv0->plxreg)
252 {
253 ulong val;
254 val = inl(dev0->base_addr + PLX_MISC_CSR);
255 if (reset)
256 val |= SE6_RESET;
257 else
258 val &= ~SE6_RESET;
259 OUTL(dev0->base_addr + PLX_MISC_CSR, val);
260 }
261 else
262 {
263 OUTB(dev0->base_addr + ES4H_PC, reset ? ES4H_PC_RESET : 0);
264 }
265}
266
267/*
268 * See if the board supports bus master DMA
269 */
270static int
271check_board_dma(struct net_device *dev0)
272{
273 DGRS_PRIV *priv0 = (DGRS_PRIV *) dev0->priv;
274 ulong x;
275
276 /*
277 * If Space.c says not to use DMA, or if it's not a PLX based
278 * PCI board, or if the expansion ROM space is not PCI
279 * configured, then return false.
280 */
281 if (!dgrs_dma || !priv0->plxreg || !priv0->plxdma)
282 return (0);
283
284 /*
285 * Set the local address remap register of the "expansion rom"
286 * area to 0x80000000 so that we can use it to access the DMA
287 * registers from the host side.
288 */
289 OUTL(dev0->base_addr + PLX_ROM_BASE_ADDR, 0x80000000);
290
291 /*
292 * Set the PCI region descriptor to:
293 * Space 0:
294 * disable read-prefetch
295 * enable READY
296 * enable BURST
297 * 0 internal wait states
298 * Expansion ROM: (used for host DMA register access)
299 * disable read-prefetch
300 * enable READY
301 * disable BURST
302 * 0 internal wait states
303 */
304 OUTL(dev0->base_addr + PLX_BUS_REGION, 0x49430343);
305
306 /*
307 * Now map the DMA registers into our virtual space
308 */
309 priv0->vplxdma = (ulong *) ioremap (priv0->plxdma, 256);
310 if (!priv0->vplxdma)
311 {
312 printk("%s: can't *remap() the DMA regs\n", dev0->name);
313 return (0);
314 }
315
316 /*
317 * Now test to see if we can access the DMA registers
318 * If we write -1 and get back 1FFF, then we accessed the
319 * DMA register. Otherwise, we probably have an old board
320 * and wrote into regular RAM.
321 */
322 priv0->vplxdma[PLX_DMA0_MODE/4] = 0xFFFFFFFF;
323 x = priv0->vplxdma[PLX_DMA0_MODE/4];
324 if (x != 0x00001FFF) {
325 iounmap((void *)priv0->vplxdma);
326 return (0);
327 }
328
329 return (1);
330}
331
332/*
333 * Initiate DMA using PLX part on PCI board. Spin the
334 * processor until completed. All addresses are physical!
335 *
336 * If pciaddr is NULL, then it's a chaining DMA, and lcladdr is
337 * the address of the first DMA descriptor in the chain.
338 *
339 * If pciaddr is not NULL, then it's a single DMA.
340 *
341 * In either case, "lcladdr" must have been fixed up to make
342 * sure the MSB isn't set using the S2DMA macro before passing
343 * the address to this routine.
344 */
345static int
346do_plx_dma(
347 struct net_device *dev,
348 ulong pciaddr,
349 ulong lcladdr,
350 int len,
351 int to_host
352)
353{
354 int i;
355 ulong csr = 0;
356 DGRS_PRIV *priv = (DGRS_PRIV *) dev->priv;
357
358 if (pciaddr)
359 {
360 /*
361 * Do a single, non-chain DMA
362 */
363 priv->vplxdma[PLX_DMA0_PCI_ADDR/4] = pciaddr;
364 priv->vplxdma[PLX_DMA0_LCL_ADDR/4] = lcladdr;
365 priv->vplxdma[PLX_DMA0_SIZE/4] = len;
366 priv->vplxdma[PLX_DMA0_DESCRIPTOR/4] = to_host
367 ? PLX_DMA_DESC_TO_HOST
368 : PLX_DMA_DESC_TO_BOARD;
369 priv->vplxdma[PLX_DMA0_MODE/4] =
370 PLX_DMA_MODE_WIDTH32
371 | PLX_DMA_MODE_WAITSTATES(0)
372 | PLX_DMA_MODE_READY
373 | PLX_DMA_MODE_NOBTERM
374 | PLX_DMA_MODE_BURST
375 | PLX_DMA_MODE_NOCHAIN;
376 }
377 else
378 {
379 /*
380 * Do a chaining DMA
381 */
382 priv->vplxdma[PLX_DMA0_MODE/4] =
383 PLX_DMA_MODE_WIDTH32
384 | PLX_DMA_MODE_WAITSTATES(0)
385 | PLX_DMA_MODE_READY
386 | PLX_DMA_MODE_NOBTERM
387 | PLX_DMA_MODE_BURST
388 | PLX_DMA_MODE_CHAIN;
389 priv->vplxdma[PLX_DMA0_DESCRIPTOR/4] = lcladdr;
390 }
391
392 priv->vplxdma[PLX_DMA_CSR/4] =
393 PLX_DMA_CSR_0_ENABLE | PLX_DMA_CSR_0_START;
394
395 /*
396 * Wait for DMA to complete
397 */
398 for (i = 0; i < 1000000; ++i)
399 {
400 /*
401 * Spin the host CPU for 1 usec, so we don't thrash
402 * the PCI bus while the PLX 9060 is doing DMA.
403 */
404 udelay(1);
405
406 csr = (volatile unsigned long) priv->vplxdma[PLX_DMA_CSR/4];
407
408 if (csr & PLX_DMA_CSR_0_DONE)
409 break;
410 }
411
412 if ( ! (csr & PLX_DMA_CSR_0_DONE) )
413 {
414 printk("%s: DMA done never occurred. DMA disabled.\n",
415 dev->name);
416 priv->use_dma = 0;
417 return 1;
418 }
419 return 0;
420}
421
422/*
423 * dgrs_rcv_frame()
424 *
425 * Process a received frame. This is called from the interrupt
426 * routine, and works for both switch mode and multi-NIC mode.
427 *
428 * Note that when in multi-NIC mode, we want to always access the
429 * hardware using the dev and priv structures of the first port,
430 * so that we are using only one set of variables to maintain
431 * the board interface status, but we want to use the Nth port
432 * dev and priv structures to maintain statistics and to pass
433 * the packet up.
434 *
435 * Only the first device structure is attached to the interrupt.
436 * We use the special "chan" variable at the end of the first RBD
437 * to select the Nth device in multi-NIC mode.
438 *
439 * We currently do chained DMA on a per-packet basis when the
440 * packet is "long", and we spin the CPU a short time polling
441 * for DMA completion. This avoids a second interrupt overhead,
442 * and gives the best performance for light traffic to the host.
443 *
444 * However, a better scheme that could be implemented would be
445 * to see how many packets are outstanding for the host, and if
446 * the number is "large", create a long chain to DMA several
447 * packets into the host in one go. In this case, we would set
448 * up some state variables to let the host CPU continue doing
449 * other things until a DMA completion interrupt comes along.
450 */
451static void
452dgrs_rcv_frame(
453 struct net_device *dev0,
454 DGRS_PRIV *priv0,
455 I596_CB *cbp
456)
457{
458 int len;
459 I596_TBD *tbdp;
460 struct sk_buff *skb;
461 uchar *putp;
462 uchar *p;
463 struct net_device *devN;
464 DGRS_PRIV *privN;
465
466 /*
467 * Determine Nth priv and dev structure pointers
468 */
469 if (dgrs_nicmode)
470 { /* Multi-NIC mode */
471 int chan = ((I596_RBD *) S2H(cbp->xmit.tbdp))->chan;
472
473 devN = priv0->devtbl[chan-1];
474 /*
475 * If devN is null, we got an interrupt before the I/F
476 * has been initialized. Pitch the packet.
477 */
478 if (devN == NULL)
479 goto out;
480 privN = (DGRS_PRIV *) devN->priv;
481 }
482 else
483 { /* Switch mode */
484 devN = dev0;
485 privN = priv0;
486 }
487
488 if (0) printk("%s: rcv len=%ld\n", devN->name, cbp->xmit.count);
489
490 /*
491 * Allocate a message block big enough to hold the whole frame
492 */
493 len = cbp->xmit.count;
494 if ((skb = dev_alloc_skb(len+5)) == NULL)
495 {
496 printk("%s: dev_alloc_skb failed for rcv buffer\n", devN->name);
497 ++dev0->stats.rx_dropped;
498 /* discarding the frame */
499 goto out;
500 }
501 skb_reserve(skb, 2); /* Align IP header */
502
503again:
504 putp = p = skb_put(skb, len);
505
506 /*
507 * There are three modes here for doing the packet copy.
508 * If we have DMA, and the packet is "long", we use the
509 * chaining mode of DMA. If it's shorter, we use single
510 * DMA's. Otherwise, we use memcpy().
511 */
512 if (priv0->use_dma && priv0->dmadesc_h && len > 64)
513 {
514 /*
515 * If we can use DMA and it's a long frame, copy it using
516 * DMA chaining.
517 */
518 DMACHAIN *ddp_h; /* Host virtual DMA desc. pointer */
519 DMACHAIN *ddp_s; /* Switch physical DMA desc. pointer */
520 uchar *phys_p;
521
522 /*
523 * Get the physical address of the STREAMS buffer.
524 * NOTE: allocb() guarantees that the whole buffer
525 * is in a single page if the length < 4096.
526 */
527 phys_p = (uchar *) virt_to_phys(putp);
528
529 ddp_h = priv0->dmadesc_h;
530 ddp_s = priv0->dmadesc_s;
531 tbdp = (I596_TBD *) S2H(cbp->xmit.tbdp);
532 for (;;)
533 {
534 int count;
535 int amt;
536
537 count = tbdp->count;
538 amt = count & 0x3fff;
539 if (amt == 0)
540 break; /* For safety */
541 if ( (p-putp) >= len)
542 {
543 printk("%s: cbp = %lx\n", devN->name, (long) H2S(cbp));
544 proc_reset(dev0, 1); /* Freeze IDT */
545 break; /* For Safety */
546 }
547
548 ddp_h->pciaddr = (ulong) phys_p;
549 ddp_h->lcladdr = S2DMA(tbdp->buf);
550 ddp_h->len = amt;
551
552 phys_p += amt;
553 p += amt;
554
555 if (count & I596_TBD_EOF)
556 {
557 ddp_h->next = PLX_DMA_DESC_TO_HOST
558 | PLX_DMA_DESC_EOC;
559 ++ddp_h;
560 break;
561 }
562 else
563 {
564 ++ddp_s;
565 ddp_h->next = PLX_DMA_DESC_TO_HOST
566 | (ulong) ddp_s;
567 tbdp = (I596_TBD *) S2H(tbdp->next);
568 ++ddp_h;
569 }
570 }
571 if (ddp_h - priv0->dmadesc_h)
572 {
573 int rc;
574
575 rc = do_plx_dma(dev0,
576 0, (ulong) priv0->dmadesc_s, len, 0);
577 if (rc)
578 {
579 printk("%s: Chained DMA failure\n", devN->name);
580 goto again;
581 }
582 }
583 }
584 else if (priv0->use_dma)
585 {
586 /*
587 * If we can use DMA and it's a shorter frame, copy it
588 * using single DMA transfers.
589 */
590 uchar *phys_p;
591
592 /*
593 * Get the physical address of the STREAMS buffer.
594 * NOTE: allocb() guarantees that the whole buffer
595 * is in a single page if the length < 4096.
596 */
597 phys_p = (uchar *) virt_to_phys(putp);
598
599 tbdp = (I596_TBD *) S2H(cbp->xmit.tbdp);
600 for (;;)
601 {
602 int count;
603 int amt;
604 int rc;
605
606 count = tbdp->count;
607 amt = count & 0x3fff;
608 if (amt == 0)
609 break; /* For safety */
610 if ( (p-putp) >= len)
611 {
612 printk("%s: cbp = %lx\n", devN->name, (long) H2S(cbp));
613 proc_reset(dev0, 1); /* Freeze IDT */
614 break; /* For Safety */
615 }
616 rc = do_plx_dma(dev0, (ulong) phys_p,
617 S2DMA(tbdp->buf), amt, 1);
618 if (rc)
619 {
620 memcpy(p, S2H(tbdp->buf), amt);
621 printk("%s: Single DMA failed\n", devN->name);
622 }
623 phys_p += amt;
624 p += amt;
625 if (count & I596_TBD_EOF)
626 break;
627 tbdp = (I596_TBD *) S2H(tbdp->next);
628 }
629 }
630 else
631 {
632 /*
633 * Otherwise, copy it piece by piece using memcpy()
634 */
635 tbdp = (I596_TBD *) S2H(cbp->xmit.tbdp);
636 for (;;)
637 {
638 int count;
639 int amt;
640
641 count = tbdp->count;
642 amt = count & 0x3fff;
643 if (amt == 0)
644 break; /* For safety */
645 if ( (p-putp) >= len)
646 {
647 printk("%s: cbp = %lx\n", devN->name, (long) H2S(cbp));
648 proc_reset(dev0, 1); /* Freeze IDT */
649 break; /* For Safety */
650 }
651 memcpy(p, S2H(tbdp->buf), amt);
652 p += amt;
653 if (count & I596_TBD_EOF)
654 break;
655 tbdp = (I596_TBD *) S2H(tbdp->next);
656 }
657 }
658
659 /*
660 * Pass the frame to upper half
661 */
662 skb->protocol = eth_type_trans(skb, devN);
663 netif_rx(skb);
664 devN->last_rx = jiffies;
665 ++devN->stats.rx_packets;
666 devN->stats.rx_bytes += len;
667
668out:
669 cbp->xmit.status = I596_CB_STATUS_C | I596_CB_STATUS_OK;
670}
671
672/*
673 * Start transmission of a frame
674 *
675 * The interface to the board is simple: we pretend that we are
676 * a fifth 82596 ethernet controller 'receiving' data, and copy the
677 * data into the same structures that a real 82596 would. This way,
678 * the board firmware handles the host 'port' the same as any other.
679 *
680 * NOTE: we do not use Bus master DMA for this routine. Turns out
681 * that it is not needed. Slave writes over the PCI bus are about
682 * as fast as DMA, due to the fact that the PLX part can do burst
683 * writes. The same is not true for data being read from the board.
684 *
685 * For multi-NIC mode, we tell the firmware the desired 82596
686 * output port by setting the special "dstchan" member at the
687 * end of the traditional 82596 RFD structure.
688 */
689
690static int dgrs_start_xmit(struct sk_buff *skb, struct net_device *devN)
691{
692 DGRS_PRIV *privN = (DGRS_PRIV *) devN->priv;
693 struct net_device *dev0;
694 DGRS_PRIV *priv0;
695 I596_RBD *rbdp;
696 int count;
697 int i, len, amt;
698
699 /*
700 * Determine 0th priv and dev structure pointers
701 */
702 if (dgrs_nicmode)
703 {
704 dev0 = privN->devtbl[0];
705 priv0 = (DGRS_PRIV *) dev0->priv;
706 }
707 else
708 {
709 dev0 = devN;
710 priv0 = privN;
711 }
712
713 if (dgrs_debug > 1)
714 printk("%s: xmit len=%d\n", devN->name, (int) skb->len);
715
716 devN->trans_start = jiffies;
717 netif_start_queue(devN);
718
719 if (priv0->rfdp->cmd & I596_RFD_EL)
720 { /* Out of RFD's */
721 if (0) printk("%s: NO RFD's\n", devN->name);
722 goto no_resources;
723 }
724
725 rbdp = priv0->rbdp;
726 count = 0;
727 priv0->rfdp->rbdp = (I596_RBD *) H2S(rbdp);
728
729 i = 0; len = skb->len;
730 for (;;)
731 {
732 if (rbdp->size & I596_RBD_EL)
733 { /* Out of RBD's */
734 if (0) printk("%s: NO RBD's\n", devN->name);
735 goto no_resources;
736 }
737
738 amt = min_t(unsigned int, len, rbdp->size - count);
739 skb_copy_from_linear_data_offset(skb, i, S2H(rbdp->buf) + count, amt);
740 i += amt;
741 count += amt;
742 len -= amt;
743 if (len == 0)
744 {
745 if (skb->len < 60)
746 rbdp->count = 60 | I596_RBD_EOF;
747 else
748 rbdp->count = count | I596_RBD_EOF;
749 rbdp = (I596_RBD *) S2H(rbdp->next);
750 goto frame_done;
751 }
752 else if (count < 32)
753 {
754 /* More data to come, but we used less than 32
755 * bytes of this RBD. Keep filling this RBD.
756 */
757 {} /* Yes, we do nothing here */
758 }
759 else
760 {
761 rbdp->count = count;
762 rbdp = (I596_RBD *) S2H(rbdp->next);
763 count = 0;
764 }
765 }
766
767frame_done:
768 priv0->rbdp = rbdp;
769 if (dgrs_nicmode)
770 priv0->rfdp->dstchan = privN->chan;
771 priv0->rfdp->status = I596_RFD_C | I596_RFD_OK;
772 priv0->rfdp = (I596_RFD *) S2H(priv0->rfdp->next);
773
774 ++devN->stats.tx_packets;
775
776 dev_kfree_skb (skb);
777 return (0);
778
779no_resources:
780 priv0->scbp->status |= I596_SCB_RNR; /* simulate I82596 */
781 return (-EAGAIN);
782}
783
784/*
785 * Open the interface
786 */
787static int
788dgrs_open( struct net_device *dev )
789{
790 netif_start_queue(dev);
791 return (0);
792}
793
794/*
795 * Close the interface
796 */
797static int dgrs_close( struct net_device *dev )
798{
799 netif_stop_queue(dev);
800 return (0);
801}
802
803/*
804 * Set multicast list and/or promiscuous mode
805 */
806
807static void dgrs_set_multicast_list( struct net_device *dev)
808{
809 DGRS_PRIV *priv = (DGRS_PRIV *) dev->priv;
810
811 priv->port->is_promisc = (dev->flags & IFF_PROMISC) ? 1 : 0;
812}
813
814/*
815 * Unique ioctl's
816 */
817static int dgrs_ioctl(struct net_device *devN, struct ifreq *ifr, int cmd)
818{
819 DGRS_PRIV *privN = (DGRS_PRIV *) devN->priv;
820 DGRS_IOCTL ioc;
821 int i;
822
823 if (cmd != DGRSIOCTL)
824 return -EINVAL;
825
826 if(copy_from_user(&ioc, ifr->ifr_data, sizeof(DGRS_IOCTL)))
827 return -EFAULT;
828
829 switch (ioc.cmd)
830 {
831 case DGRS_GETMEM:
832 if (ioc.len != sizeof(ulong))
833 return -EINVAL;
834 if(copy_to_user(ioc.data, &devN->mem_start, ioc.len))
835 return -EFAULT;
836 return (0);
837 case DGRS_SETFILTER:
838 if (!capable(CAP_NET_ADMIN))
839 return -EPERM;
840 if (ioc.port > privN->bcomm->bc_nports)
841 return -EINVAL;
842 if (ioc.filter >= NFILTERS)
843 return -EINVAL;
844 if (ioc.len > privN->bcomm->bc_filter_area_len)
845 return -EINVAL;
846
847 /* Wait for old command to finish */
848 for (i = 0; i < 1000; ++i)
849 {
850 if ( (volatile long) privN->bcomm->bc_filter_cmd <= 0 )
851 break;
852 udelay(1);
853 }
854 if (i >= 1000)
855 return -EIO;
856
857 privN->bcomm->bc_filter_port = ioc.port;
858 privN->bcomm->bc_filter_num = ioc.filter;
859 privN->bcomm->bc_filter_len = ioc.len;
860
861 if (ioc.len)
862 {
863 if(copy_from_user(S2HN(privN->bcomm->bc_filter_area),
864 ioc.data, ioc.len))
865 return -EFAULT;
866 privN->bcomm->bc_filter_cmd = BC_FILTER_SET;
867 }
868 else
869 privN->bcomm->bc_filter_cmd = BC_FILTER_CLR;
870 return(0);
871 default:
872 return -EOPNOTSUPP;
873 }
874}
875
876/*
877 * Process interrupts
878 *
879 * dev, priv will always refer to the 0th device in Multi-NIC mode.
880 */
881
882static irqreturn_t dgrs_intr(int irq, void *dev_id)
883{
884 struct net_device *dev0 = dev_id;
885 DGRS_PRIV *priv0 = dev0->priv;
886 I596_CB *cbp;
887 int cmd;
888 int i;
889
890 ++priv0->intrcnt;
891 if (1) ++priv0->bcomm->bc_cnt[4];
892 if (0)
893 {
894 static int cnt = 100;
895 if (--cnt > 0)
896 printk("%s: interrupt: irq %d\n", dev0->name, irq);
897 }
898
899 /*
900 * Get 596 command
901 */
902 cmd = priv0->scbp->cmd;
903
904 /*
905 * See if RU has been restarted
906 */
907 if ( (cmd & I596_SCB_RUC) == I596_SCB_RUC_START)
908 {
909 if (0) printk("%s: RUC start\n", dev0->name);
910 priv0->rfdp = (I596_RFD *) S2H(priv0->scbp->rfdp);
911 priv0->rbdp = (I596_RBD *) S2H(priv0->rfdp->rbdp);
912 priv0->scbp->status &= ~(I596_SCB_RNR|I596_SCB_RUS);
913 /*
914 * Tell upper half (halves)
915 */
916 if (dgrs_nicmode)
917 {
918 for (i = 0; i < priv0->nports; ++i)
919 netif_wake_queue (priv0->devtbl[i]);
920 }
921 else
922 netif_wake_queue (dev0);
923 /* if (bd->flags & TX_QUEUED)
924 DL_sched(bd, bdd); */
925 }
926
927 /*
928 * See if any CU commands to process
929 */
930 if ( (cmd & I596_SCB_CUC) != I596_SCB_CUC_START)
931 {
932 priv0->scbp->cmd = 0; /* Ignore all other commands */
933 goto ack_intr;
934 }
935 priv0->scbp->status &= ~(I596_SCB_CNA|I596_SCB_CUS);
936
937 /*
938 * Process a command
939 */
940 cbp = (I596_CB *) S2H(priv0->scbp->cbp);
941 priv0->scbp->cmd = 0; /* Safe to clear the command */
942 for (;;)
943 {
944 switch (cbp->nop.cmd & I596_CB_CMD)
945 {
946 case I596_CB_CMD_XMIT:
947 dgrs_rcv_frame(dev0, priv0, cbp);
948 break;
949 default:
950 cbp->nop.status = I596_CB_STATUS_C | I596_CB_STATUS_OK;
951 break;
952 }
953 if (cbp->nop.cmd & I596_CB_CMD_EL)
954 break;
955 cbp = (I596_CB *) S2H(cbp->nop.next);
956 }
957 priv0->scbp->status |= I596_SCB_CNA;
958
959 /*
960 * Ack the interrupt
961 */
962ack_intr:
963 if (priv0->plxreg)
964 OUTL(dev0->base_addr + PLX_LCL2PCI_DOORBELL, 1);
965
966 return IRQ_HANDLED;
967}
968
969/*
970 * Download the board firmware
971 */
972static int __init
973dgrs_download(struct net_device *dev0)
974{
975 DGRS_PRIV *priv0 = (DGRS_PRIV *) dev0->priv;
976 int is;
977 unsigned long i;
978
979 static const int iv2is[16] = {
980 0, 0, 0, ES4H_IS_INT3,
981 0, ES4H_IS_INT5, 0, ES4H_IS_INT7,
982 0, 0, ES4H_IS_INT10, ES4H_IS_INT11,
983 ES4H_IS_INT12, 0, 0, ES4H_IS_INT15 };
984
985 /*
986 * Map in the dual port memory
987 */
988 priv0->vmem = ioremap(dev0->mem_start, 2048*1024);
989 if (!priv0->vmem)
990 {
991 printk("%s: cannot map in board memory\n", dev0->name);
992 return -ENXIO;
993 }
994
995 /*
996 * Hold the processor and configure the board addresses
997 */
998 if (priv0->plxreg)
999 { /* PCI bus */
1000 proc_reset(dev0, 1);
1001 }
1002 else
1003 { /* EISA bus */
1004 is = iv2is[dev0->irq & 0x0f];
1005 if (!is)
1006 {
1007 printk("%s: Illegal IRQ %d\n", dev0->name, dev0->irq);
1008 iounmap(priv0->vmem);
1009 priv0->vmem = NULL;
1010 return -ENXIO;
1011 }
1012 OUTB(dev0->base_addr + ES4H_AS_31_24,
1013 (uchar) (dev0->mem_start >> 24) );
1014 OUTB(dev0->base_addr + ES4H_AS_23_16,
1015 (uchar) (dev0->mem_start >> 16) );
1016 priv0->is_reg = ES4H_IS_LINEAR | is |
1017 ((uchar) (dev0->mem_start >> 8) & ES4H_IS_AS15);
1018 OUTB(dev0->base_addr + ES4H_IS, priv0->is_reg);
1019 OUTB(dev0->base_addr + ES4H_EC, ES4H_EC_ENABLE);
1020 OUTB(dev0->base_addr + ES4H_PC, ES4H_PC_RESET);
1021 OUTB(dev0->base_addr + ES4H_MW, ES4H_MW_ENABLE | 0x00);
1022 }
1023
1024 /*
1025 * See if we can do DMA on the SE-6
1026 */
1027 priv0->use_dma = check_board_dma(dev0);
1028 if (priv0->use_dma)
1029 printk("%s: Bus Master DMA is enabled.\n", dev0->name);
1030
1031 /*
1032 * Load and verify the code at the desired address
1033 */
1034 memcpy(priv0->vmem, dgrs_code, dgrs_ncode); /* Load code */
1035 if (memcmp(priv0->vmem, dgrs_code, dgrs_ncode))
1036 {
1037 iounmap(priv0->vmem);
1038 priv0->vmem = NULL;
1039 printk("%s: download compare failed\n", dev0->name);
1040 return -ENXIO;
1041 }
1042
1043 /*
1044 * Configurables
1045 */
1046 priv0->bcomm = (struct bios_comm *) (priv0->vmem + 0x0100);
1047 priv0->bcomm->bc_nowait = 1; /* Tell board to make printf not wait */
1048 priv0->bcomm->bc_squelch = 0; /* Flag from Space.c */
1049 priv0->bcomm->bc_150ohm = 0; /* Flag from Space.c */
1050
1051 priv0->bcomm->bc_spew = 0; /* Debug flag from Space.c */
1052 priv0->bcomm->bc_maxrfd = 0; /* Debug flag from Space.c */
1053 priv0->bcomm->bc_maxrbd = 0; /* Debug flag from Space.c */
1054
1055 /*
1056 * Tell board we are operating in switch mode (1) or in
1057 * multi-NIC mode (2).
1058 */
1059 priv0->bcomm->bc_host = dgrs_nicmode ? BC_MULTINIC : BC_SWITCH;
1060
1061 /*
1062 * Request memory space on board for DMA chains
1063 */
1064 if (priv0->use_dma)
1065 priv0->bcomm->bc_hostarea_len = (2048/64) * 16;
1066
1067 /*
1068 * NVRAM configurables from Space.c
1069 */
1070 priv0->bcomm->bc_spantree = dgrs_spantree;
1071 priv0->bcomm->bc_hashexpire = dgrs_hashexpire;
1072 memcpy(priv0->bcomm->bc_ipaddr, dgrs_ipaddr, 4);
1073 memcpy(priv0->bcomm->bc_iptrap, dgrs_iptrap, 4);
1074 memcpy(priv0->bcomm->bc_ipxnet, &dgrs_ipxnet, 4);
1075
1076 /*
1077 * Release processor, wait 8 seconds for board to initialize
1078 */
1079 proc_reset(dev0, 0);
1080
1081 for (i = jiffies + 8 * HZ; time_after(i, jiffies); )
1082 {
1083 barrier(); /* Gcc 2.95 needs this */
1084 if (priv0->bcomm->bc_status >= BC_RUN)
1085 break;
1086 }
1087
1088 if (priv0->bcomm->bc_status < BC_RUN)
1089 {
1090 printk("%s: board not operating\n", dev0->name);
1091 iounmap(priv0->vmem);
1092 priv0->vmem = NULL;
1093 return -ENXIO;
1094 }
1095
1096 priv0->port = (PORT *) S2H(priv0->bcomm->bc_port);
1097 priv0->scbp = (I596_SCB *) S2H(priv0->port->scbp);
1098 priv0->rfdp = (I596_RFD *) S2H(priv0->scbp->rfdp);
1099 priv0->rbdp = (I596_RBD *) S2H(priv0->rfdp->rbdp);
1100
1101 priv0->scbp->status = I596_SCB_CNA; /* CU is idle */
1102
1103 /*
1104 * Get switch physical and host virtual pointers to DMA
1105 * chaining area. NOTE: the MSB of the switch physical
1106 * address *must* be turned off. Otherwise, the HW kludge
1107 * that allows host access of the PLX DMA registers will
1108 * erroneously select the PLX registers.
1109 */
1110 priv0->dmadesc_s = (DMACHAIN *) S2DMA(priv0->bcomm->bc_hostarea);
1111 if (priv0->dmadesc_s)
1112 priv0->dmadesc_h = (DMACHAIN *) S2H(priv0->dmadesc_s);
1113 else
1114 priv0->dmadesc_h = NULL;
1115
1116 /*
1117 * Enable board interrupts
1118 */
1119 if (priv0->plxreg)
1120 { /* PCI bus */
1121 OUTL(dev0->base_addr + PLX_INT_CSR,
1122 inl(dev0->base_addr + PLX_INT_CSR)
1123 | PLX_PCI_DOORBELL_IE); /* Enable intr to host */
1124 OUTL(dev0->base_addr + PLX_LCL2PCI_DOORBELL, 1);
1125 }
1126 else
1127 { /* EISA bus */
1128 }
1129
1130 return (0);
1131}
1132
1133/*
1134 * Probe (init) a board
1135 */
1136static int __init
1137dgrs_probe1(struct net_device *dev)
1138{
1139 DGRS_PRIV *priv = (DGRS_PRIV *) dev->priv;
1140 unsigned long i;
1141 int rc;
1142 DECLARE_MAC_BUF(mac);
1143
1144 printk("%s: Digi RightSwitch io=%lx mem=%lx irq=%d plx=%lx dma=%lx\n",
1145 dev->name, dev->base_addr, dev->mem_start, dev->irq,
1146 priv->plxreg, priv->plxdma);
1147
1148 /*
1149 * Download the firmware and light the processor
1150 */
1151 rc = dgrs_download(dev);
1152 if (rc)
1153 goto err_out;
1154
1155 /*
1156 * Get ether address of board
1157 */
1158 memcpy(dev->dev_addr, priv->port->ethaddr, 6);
1159 printk("%s: Ethernet address %s\n",
1160 dev->name, print_mac(mac, dev->dev_addr));
1161
1162 if (dev->dev_addr[0] & 1)
1163 {
1164 printk("%s: Illegal Ethernet Address\n", dev->name);
1165 rc = -ENXIO;
1166 goto err_out;
1167 }
1168
1169 /*
1170 * ACK outstanding interrupts, hook the interrupt,
1171 * and verify that we are getting interrupts from the board.
1172 */
1173 if (priv->plxreg)
1174 OUTL(dev->base_addr + PLX_LCL2PCI_DOORBELL, 1);
1175
1176 rc = request_irq(dev->irq, &dgrs_intr, IRQF_SHARED, "RightSwitch", dev);
1177 if (rc)
1178 goto err_out;
1179
1180 priv->intrcnt = 0;
1181 for (i = jiffies + 2*HZ + HZ/2; time_after(i, jiffies); )
1182 {
1183 cpu_relax();
1184 if (priv->intrcnt >= 2)
1185 break;
1186 }
1187 if (priv->intrcnt < 2)
1188 {
1189 printk(KERN_ERR "%s: Not interrupting on IRQ %d (%d)\n",
1190 dev->name, dev->irq, priv->intrcnt);
1191 rc = -ENXIO;
1192 goto err_free_irq;
1193 }
1194
1195 /*
1196 * Entry points...
1197 */
1198 dev->open = &dgrs_open;
1199 dev->stop = &dgrs_close;
1200 dev->hard_start_xmit = &dgrs_start_xmit;
1201 dev->set_multicast_list = &dgrs_set_multicast_list;
1202 dev->do_ioctl = &dgrs_ioctl;
1203
1204 return rc;
1205
1206err_free_irq:
1207 free_irq(dev->irq, dev);
1208err_out:
1209 return rc;
1210}
1211
1212static int __init
1213dgrs_initclone(struct net_device *dev)
1214{
1215 DGRS_PRIV *priv = (DGRS_PRIV *) dev->priv;
1216 DECLARE_MAC_BUF(mac);
1217
1218 printk("%s: Digi RightSwitch port %d %s\n",
1219 dev->name, priv->chan, print_mac(mac, dev->dev_addr));
1220
1221 return 0;
1222}
1223
1224static struct net_device * __init
1225dgrs_found_device(
1226 int io,
1227 ulong mem,
1228 int irq,
1229 ulong plxreg,
1230 ulong plxdma,
1231 struct device *pdev
1232)
1233{
1234 DGRS_PRIV *priv;
1235 struct net_device *dev;
1236 int i, ret = -ENOMEM;
1237
1238 dev = alloc_etherdev(sizeof(DGRS_PRIV));
1239 if (!dev)
1240 goto err0;
1241
1242 priv = (DGRS_PRIV *)dev->priv;
1243
1244 dev->base_addr = io;
1245 dev->mem_start = mem;
1246 dev->mem_end = mem + 2048 * 1024 - 1;
1247 dev->irq = irq;
1248 priv->plxreg = plxreg;
1249 priv->plxdma = plxdma;
1250 priv->vplxdma = NULL;
1251
1252 priv->chan = 1;
1253 priv->devtbl[0] = dev;
1254
1255 SET_NETDEV_DEV(dev, pdev);
1256
1257 ret = dgrs_probe1(dev);
1258 if (ret)
1259 goto err1;
1260
1261 ret = register_netdev(dev);
1262 if (ret)
1263 goto err2;
1264
1265 if ( !dgrs_nicmode )
1266 return dev; /* Switch mode, we are done */
1267
1268 /*
1269 * Operating card as N separate NICs
1270 */
1271
1272 priv->nports = priv->bcomm->bc_nports;
1273
1274 for (i = 1; i < priv->nports; ++i)
1275 {
1276 struct net_device *devN;
1277 DGRS_PRIV *privN;
1278 /* Allocate new dev and priv structures */
1279 devN = alloc_etherdev(sizeof(DGRS_PRIV));
1280 ret = -ENOMEM;
1281 if (!devN)
1282 goto fail;
1283
1284 /* Don't copy the network device structure! */
1285
1286 /* copy the priv structure of dev[0] */
1287 privN = (DGRS_PRIV *)devN->priv;
1288 *privN = *priv;
1289
1290 /* ... and zero out VM areas */
1291 privN->vmem = NULL;
1292 privN->vplxdma = NULL;
1293 /* ... and zero out IRQ */
1294 devN->irq = 0;
1295 /* ... and base MAC address off address of 1st port */
1296 devN->dev_addr[5] += i;
1297
1298 ret = dgrs_initclone(devN);
1299 if (ret)
1300 goto fail;
1301
1302 SET_NETDEV_DEV(dev, pdev);
1303
1304 ret = register_netdev(devN);
1305 if (ret) {
1306 free_netdev(devN);
1307 goto fail;
1308 }
1309 privN->chan = i+1;
1310 priv->devtbl[i] = devN;
1311 }
1312 return dev;
1313
1314 fail:
1315 while (i >= 0) {
1316 struct net_device *d = priv->devtbl[i--];
1317 unregister_netdev(d);
1318 free_netdev(d);
1319 }
1320
1321 err2:
1322 free_irq(dev->irq, dev);
1323 err1:
1324 free_netdev(dev);
1325 err0:
1326 return ERR_PTR(ret);
1327}
1328
1329static void __devexit dgrs_remove(struct net_device *dev)
1330{
1331 DGRS_PRIV *priv = dev->priv;
1332 int i;
1333
1334 unregister_netdev(dev);
1335
1336 for (i = 1; i < priv->nports; ++i) {
1337 struct net_device *d = priv->devtbl[i];
1338 if (d) {
1339 unregister_netdev(d);
1340 free_netdev(d);
1341 }
1342 }
1343
1344 proc_reset(priv->devtbl[0], 1);
1345
1346 if (priv->vmem)
1347 iounmap(priv->vmem);
1348 if (priv->vplxdma)
1349 iounmap((uchar *) priv->vplxdma);
1350
1351 if (dev->irq)
1352 free_irq(dev->irq, dev);
1353
1354 for (i = 1; i < priv->nports; ++i) {
1355 if (priv->devtbl[i])
1356 unregister_netdev(priv->devtbl[i]);
1357 }
1358}
1359
1360#ifdef CONFIG_PCI
1361static int __init dgrs_pci_probe(struct pci_dev *pdev,
1362 const struct pci_device_id *ent)
1363{
1364 struct net_device *dev;
1365 int err;
1366 uint io;
1367 uint mem;
1368 uint irq;
1369 uint plxreg;
1370 uint plxdma;
1371
1372 /*
1373 * Get and check the bus-master and latency values.
1374 * Some PCI BIOSes fail to set the master-enable bit,
1375 * and the latency timer must be set to the maximum
1376 * value to avoid data corruption that occurs when the
1377 * timer expires during a transfer. Yes, it's a bug.
1378 */
1379 err = pci_enable_device(pdev);
1380 if (err)
1381 return err;
1382 err = pci_request_regions(pdev, "RightSwitch");
1383 if (err)
1384 return err;
1385
1386 pci_set_master(pdev);
1387
1388 plxreg = pci_resource_start (pdev, 0);
1389 io = pci_resource_start (pdev, 1);
1390 mem = pci_resource_start (pdev, 2);
1391 pci_read_config_dword(pdev, 0x30, &plxdma);
1392 irq = pdev->irq;
1393 plxdma &= ~15;
1394
1395 /*
1396 * On some BIOSES, the PLX "expansion rom" (used for DMA)
1397 * address comes up as "0". This is probably because
1398 * the BIOS doesn't see a valid 55 AA ROM signature at
1399 * the "ROM" start and zeroes the address. To get
1400 * around this problem the SE-6 is configured to ask
1401 * for 4 MB of space for the dual port memory. We then
1402 * must set its range back to 2 MB, and use the upper
1403 * half for DMA register access
1404 */
1405 OUTL(io + PLX_SPACE0_RANGE, 0xFFE00000L);
1406 if (plxdma == 0)
1407 plxdma = mem + (2048L * 1024L);
1408 pci_write_config_dword(pdev, 0x30, plxdma + 1);
1409 pci_read_config_dword(pdev, 0x30, &plxdma);
1410 plxdma &= ~15;
1411
1412 dev = dgrs_found_device(io, mem, irq, plxreg, plxdma, &pdev->dev);
1413 if (IS_ERR(dev)) {
1414 pci_release_regions(pdev);
1415 return PTR_ERR(dev);
1416 }
1417
1418 pci_set_drvdata(pdev, dev);
1419 return 0;
1420}
1421
1422static void __devexit dgrs_pci_remove(struct pci_dev *pdev)
1423{
1424 struct net_device *dev = pci_get_drvdata(pdev);
1425
1426 dgrs_remove(dev);
1427 pci_release_regions(pdev);
1428 free_netdev(dev);
1429}
1430
1431static struct pci_driver dgrs_pci_driver = {
1432 .name = "dgrs",
1433 .id_table = dgrs_pci_tbl,
1434 .probe = dgrs_pci_probe,
1435 .remove = __devexit_p(dgrs_pci_remove),
1436};
1437#else
1438static struct pci_driver dgrs_pci_driver = {};
1439#endif
1440
1441
1442#ifdef CONFIG_EISA
1443static int is2iv[8] __initdata = { 0, 3, 5, 7, 10, 11, 12, 15 };
1444
1445static int __init dgrs_eisa_probe (struct device *gendev)
1446{
1447 struct net_device *dev;
1448 struct eisa_device *edev = to_eisa_device(gendev);
1449 uint io = edev->base_addr;
1450 uint mem;
1451 uint irq;
1452 int rc = -ENODEV; /* Not EISA configured */
1453
1454 if (!request_region(io, 256, "RightSwitch")) {
1455 printk(KERN_ERR "dgrs: eisa io 0x%x, which is busy.\n", io);
1456 return -EBUSY;
1457 }
1458
1459 if ( ! (inb(io+ES4H_EC) & ES4H_EC_ENABLE) )
1460 goto err_out;
1461
1462 mem = (inb(io+ES4H_AS_31_24) << 24)
1463 + (inb(io+ES4H_AS_23_16) << 16);
1464
1465 irq = is2iv[ inb(io+ES4H_IS) & ES4H_IS_INTMASK ];
1466
1467 dev = dgrs_found_device(io, mem, irq, 0L, 0L, gendev);
1468 if (IS_ERR(dev)) {
1469 rc = PTR_ERR(dev);
1470 goto err_out;
1471 }
1472
1473 gendev->driver_data = dev;
1474 return 0;
1475 err_out:
1476 release_region(io, 256);
1477 return rc;
1478}
1479
1480static int __devexit dgrs_eisa_remove(struct device *gendev)
1481{
1482 struct net_device *dev = gendev->driver_data;
1483
1484 dgrs_remove(dev);
1485
1486 release_region(dev->base_addr, 256);
1487
1488 free_netdev(dev);
1489 return 0;
1490}
1491
1492
1493static struct eisa_driver dgrs_eisa_driver = {
1494 .id_table = dgrs_eisa_tbl,
1495 .driver = {
1496 .name = "dgrs",
1497 .probe = dgrs_eisa_probe,
1498 .remove = __devexit_p(dgrs_eisa_remove),
1499 }
1500};
1501#endif
1502
1503/*
1504 * Variables that can be overriden from module command line
1505 */
1506static int debug = -1;
1507static int dma = -1;
1508static int hashexpire = -1;
1509static int spantree = -1;
1510static int ipaddr[4] = { -1 };
1511static int iptrap[4] = { -1 };
1512static __u32 ipxnet = -1;
1513static int nicmode = -1;
1514
1515module_param(debug, int, 0);
1516module_param(dma, int, 0);
1517module_param(hashexpire, int, 0);
1518module_param(spantree, int, 0);
1519module_param_array(ipaddr, int, NULL, 0);
1520module_param_array(iptrap, int, NULL, 0);
1521module_param(ipxnet, int, 0);
1522module_param(nicmode, int, 0);
1523MODULE_PARM_DESC(debug, "Digi RightSwitch enable debugging (0-1)");
1524MODULE_PARM_DESC(dma, "Digi RightSwitch enable BM DMA (0-1)");
1525MODULE_PARM_DESC(nicmode, "Digi RightSwitch operating mode (1: switch, 2: multi-NIC)");
1526
1527static int __init dgrs_init_module (void)
1528{
1529 int i;
1530 int err;
1531
1532 /*
1533 * Command line variable overrides
1534 * debug=NNN
1535 * dma=0/1
1536 * spantree=0/1
1537 * hashexpire=NNN
1538 * ipaddr=A,B,C,D
1539 * iptrap=A,B,C,D
1540 * ipxnet=NNN
1541 * nicmode=NNN
1542 */
1543 if (debug >= 0)
1544 dgrs_debug = debug;
1545 if (dma >= 0)
1546 dgrs_dma = dma;
1547 if (nicmode >= 0)
1548 dgrs_nicmode = nicmode;
1549 if (hashexpire >= 0)
1550 dgrs_hashexpire = hashexpire;
1551 if (spantree >= 0)
1552 dgrs_spantree = spantree;
1553 if (ipaddr[0] != -1)
1554 for (i = 0; i < 4; ++i)
1555 dgrs_ipaddr[i] = ipaddr[i];
1556 if (iptrap[0] != -1)
1557 for (i = 0; i < 4; ++i)
1558 dgrs_iptrap[i] = iptrap[i];
1559 if (ipxnet != -1)
1560 dgrs_ipxnet = htonl( ipxnet );
1561
1562 if (dgrs_debug)
1563 {
1564 printk(KERN_INFO "dgrs: SW=%s FW=Build %d %s\nFW Version=%s\n",
1565 version, dgrs_firmnum, dgrs_firmdate, dgrs_firmver);
1566 }
1567
1568 /*
1569 * Find and configure all the cards
1570 */
1571#ifdef CONFIG_EISA
1572 err = eisa_driver_register(&dgrs_eisa_driver);
1573 if (err)
1574 return err;
1575#endif
1576 err = pci_register_driver(&dgrs_pci_driver);
1577 if (err)
1578 return err;
1579 return 0;
1580}
1581
1582static void __exit dgrs_cleanup_module (void)
1583{
1584#ifdef CONFIG_EISA
1585 eisa_driver_unregister (&dgrs_eisa_driver);
1586#endif
1587#ifdef CONFIG_PCI
1588 pci_unregister_driver (&dgrs_pci_driver);
1589#endif
1590}
1591
1592module_init(dgrs_init_module);
1593module_exit(dgrs_cleanup_module);
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-18 09:44:26 -0500