Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:
	drivers/net/can/Kconfig

1 files changed, 5 insertions, 55 deletions

diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index c16e6ff139d0..732b093e0815 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -35,63 +35,9 @@ config CAN_CALC_BITTIMING
           arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw".
           If unsure, say Y.
 
-config CAN_SJA1000
-        depends on CAN_DEV && HAS_IOMEM
-        tristate "Philips SJA1000"
-        ---help---
-          Driver for the SJA1000 CAN controllers from Philips or NXP
-
-config CAN_SJA1000_ISA
-        depends on CAN_SJA1000 && ISA
-        tristate "ISA Bus based legacy SJA1000 driver"
-        ---help---
-          This driver adds legacy support for SJA1000 chips connected to
-          the ISA bus using I/O port, memory mapped or indirect access.
-
-config CAN_SJA1000_PLATFORM
-        depends on CAN_SJA1000
-        tristate "Generic Platform Bus based SJA1000 driver"
-        ---help---
-          This driver adds support for the SJA1000 chips connected to
-          the "platform bus" (Linux abstraction for directly to the
-          processor attached devices).  Which can be found on various
-          boards from Phytec (http://www.phytec.de) like the PCM027,
-          PCM038.
-
-config CAN_SJA1000_OF_PLATFORM
-        depends on CAN_SJA1000 && PPC_OF
-        tristate "Generic OF Platform Bus based SJA1000 driver"
-        ---help---
-          This driver adds support for the SJA1000 chips connected to
-          the OpenFirmware "platform bus" found on embedded systems with
-          OpenFirmware bindings, e.g. if you have a PowerPC based system
-          you may want to enable this option.
-
-config CAN_EMS_PCI
-        tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
-        depends on PCI && CAN_SJA1000
-        ---help---
-          This driver is for the one, two or four channel CPC-PCI,
-          CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
-          (http://www.ems-wuensche.de).
-
-config CAN_EMS_USB
-        tristate "EMS CPC-USB/ARM7 CAN/USB interface"
-        depends on USB && CAN_DEV
-        ---help---
-          This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
-          from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
-
-config CAN_KVASER_PCI
-        tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
-        depends on PCI && CAN_SJA1000
-        ---help---
-          This driver is for the the PCIcanx and PCIcan cards (1, 2 or
-          4 channel) from Kvaser (http://www.kvaser.com).
-
 config CAN_AT91
         tristate "Atmel AT91 onchip CAN controller"
-        depends on CAN && CAN_DEV && ARCH_AT91SAM9263
+        depends on CAN_DEV && ARCH_AT91SAM9263
         ---help---
           This is a driver for the SoC CAN controller in Atmel's AT91SAM9263.
 
@@ -127,6 +73,10 @@ config CAN_MPC52XX
           This driver can also be built as a module.  If so, the module
           will be called mpc5xxx_can.
 
+source "drivers/net/can/sja1000/Kconfig"
+
+source "drivers/net/can/usb/Kconfig"
+
 config CAN_DEBUG_DEVICES
         bool "CAN devices debugging messages"
         depends on CAN