bnx2x: Handling load failures

Failures on load were not handled correctly - separate the flow to handle

different failures

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 88 insertions, 66 deletions

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 860b9f8ddd30..707c4bbe46a4 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -6328,7 +6328,7 @@ static void bnx2x_set_rx_mode(struct net_device *dev);
 static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 {
         u32 load_code;
-        int i, rc;
+        int i, rc = 0;
 #ifdef BNX2X_STOP_ON_ERROR
         if (unlikely(bp->panic))
                 return -EPERM;
@@ -6336,48 +6336,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 
         bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD;
 
-        /* Send LOAD_REQUEST command to MCP
-           Returns the type of LOAD command:
-           if it is the first port to be initialized
-           common blocks should be initialized, otherwise - not
-        */
-        if (!BP_NOMCP(bp)) {
-                load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ);
-                if (!load_code) {
-                        BNX2X_ERR("MCP response failure, aborting\n");
-                        return -EBUSY;
-                }
-                if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED)
-                        return -EBUSY; /* other port in diagnostic mode */
-
-        } else {
-                int port = BP_PORT(bp);
-
-                DP(NETIF_MSG_IFUP, "NO MCP load counts before us %d, %d, %d\n",
-                   load_count[0], load_count[1], load_count[2]);
-                load_count[0]++;
-                load_count[1 + port]++;
-                DP(NETIF_MSG_IFUP, "NO MCP new load counts       %d, %d, %d\n",
-                   load_count[0], load_count[1], load_count[2]);
-                if (load_count[0] == 1)
-                        load_code = FW_MSG_CODE_DRV_LOAD_COMMON;
-                else if (load_count[1 + port] == 1)
-                        load_code = FW_MSG_CODE_DRV_LOAD_PORT;
-                else
-                        load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION;
-        }
-
-        if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
-            (load_code == FW_MSG_CODE_DRV_LOAD_PORT))
-                bp->port.pmf = 1;
-        else
-                bp->port.pmf = 0;
-        DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf);
-
-        /* if we can't use MSI-X we only need one fp,
-         * so try to enable MSI-X with the requested number of fp's
-         * and fallback to inta with one fp
-         */
         if (use_inta) {
                 bp->num_queues = 1;
 
@@ -6392,7 +6350,15 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
                 else
                         bp->num_queues = 1;
 
-                if (bnx2x_enable_msix(bp)) {
+                DP(NETIF_MSG_IFUP,
+                   "set number of queues to %d\n", bp->num_queues);
+
+                /* if we can't use MSI-X we only need one fp,
+                 * so try to enable MSI-X with the requested number of fp's
+                 * and fallback to MSI or legacy INTx with one fp
+                 */
+                rc = bnx2x_enable_msix(bp);
+                if (rc) {
                         /* failed to enable MSI-X */
                         bp->num_queues = 1;
                         if (use_multi)
@@ -6400,8 +6366,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
                                           " to enable MSI-X\n");
                 }
         }
-        DP(NETIF_MSG_IFUP,
-           "set number of queues to %d\n", bp->num_queues);
 
         if (bnx2x_alloc_mem(bp))
                 return -ENOMEM;
@@ -6410,30 +6374,85 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
                 bnx2x_fp(bp, i, disable_tpa) =
                                         ((bp->flags & TPA_ENABLE_FLAG) == 0);
 
+        for_each_queue(bp, i)
+                netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi),
+                               bnx2x_poll, 128);
+
+#ifdef BNX2X_STOP_ON_ERROR
+        for_each_queue(bp, i) {
+                struct bnx2x_fastpath *fp = &bp->fp[i];
+
+                fp->poll_no_work = 0;
+                fp->poll_calls = 0;
+                fp->poll_max_calls = 0;
+                fp->poll_complete = 0;
+                fp->poll_exit = 0;
+        }
+#endif
+        bnx2x_napi_enable(bp);
+
         if (bp->flags & USING_MSIX_FLAG) {
                 rc = bnx2x_req_msix_irqs(bp);
                 if (rc) {
                         pci_disable_msix(bp->pdev);
-                        goto load_error;
+                        goto load_error1;
                 }
+                printk(KERN_INFO PFX "%s: using MSI-X\n", bp->dev->name);
         } else {
                 bnx2x_ack_int(bp);
                 rc = bnx2x_req_irq(bp);
                 if (rc) {
-                        BNX2X_ERR("IRQ request failed, aborting\n");
-                        goto load_error;
+                        BNX2X_ERR("IRQ request failed  rc %d, aborting\n", rc);
+                        goto load_error1;
                 }
         }
 
-        for_each_queue(bp, i)
-                netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi),
-                               bnx2x_poll, 128);
+        /* Send LOAD_REQUEST command to MCP
+           Returns the type of LOAD command:
+           if it is the first port to be initialized
+           common blocks should be initialized, otherwise - not
+        */
+        if (!BP_NOMCP(bp)) {
+                load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ);
+                if (!load_code) {
+                        BNX2X_ERR("MCP response failure, aborting\n");
+                        rc = -EBUSY;
+                        goto load_error2;
+                }
+                if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) {
+                        rc = -EBUSY; /* other port in diagnostic mode */
+                        goto load_error2;
+                }
+
+        } else {
+                int port = BP_PORT(bp);
+
+                DP(NETIF_MSG_IFUP, "NO MCP load counts before us %d, %d, %d\n",
+                   load_count[0], load_count[1], load_count[2]);
+                load_count[0]++;
+                load_count[1 + port]++;
+                DP(NETIF_MSG_IFUP, "NO MCP new load counts       %d, %d, %d\n",
+                   load_count[0], load_count[1], load_count[2]);
+                if (load_count[0] == 1)
+                        load_code = FW_MSG_CODE_DRV_LOAD_COMMON;
+                else if (load_count[1 + port] == 1)
+                        load_code = FW_MSG_CODE_DRV_LOAD_PORT;
+                else
+                        load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION;
+        }
+
+        if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
+            (load_code == FW_MSG_CODE_DRV_LOAD_PORT))
+                bp->port.pmf = 1;
+        else
+                bp->port.pmf = 0;
+        DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf);
 
         /* Initialize HW */
         rc = bnx2x_init_hw(bp, load_code);
         if (rc) {
                 BNX2X_ERR("HW init failed, aborting\n");
-                goto load_int_disable;
+                goto load_error2;
         }
 
         /* Setup NIC internals and enable interrupts */
@@ -6445,7 +6464,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
                 if (!load_code) {
                         BNX2X_ERR("MCP response failure, aborting\n");
                         rc = -EBUSY;
-                        goto load_rings_free;
+                        goto load_error3;
                 }
         }
 
@@ -6454,7 +6473,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
         rc = bnx2x_setup_leading(bp);
         if (rc) {
                 BNX2X_ERR("Setup leading failed!\n");
-                goto load_netif_stop;
+                goto load_error3;
         }
 
         if (CHIP_IS_E1H(bp))
@@ -6467,7 +6486,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
                 for_each_nondefault_queue(bp, i) {
                         rc = bnx2x_setup_multi(bp, i);
                         if (rc)
-                                goto load_netif_stop;
+                                goto load_error3;
                 }
 
         if (CHIP_IS_E1(bp))
@@ -6483,18 +6502,18 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
         case LOAD_NORMAL:
                 /* Tx queue should be only reenabled */
                 netif_wake_queue(bp->dev);
+                /* Initialize the receive filter. */
                 bnx2x_set_rx_mode(bp->dev);
                 break;
 
         case LOAD_OPEN:
                 netif_start_queue(bp->dev);
+                /* Initialize the receive filter. */
                 bnx2x_set_rx_mode(bp->dev);
-                if (bp->flags & USING_MSIX_FLAG)
-                        printk(KERN_INFO PFX "%s: using MSI-X\n",
-                               bp->dev->name);
                 break;
 
         case LOAD_DIAG:
+                /* Initialize the receive filter. */
                 bnx2x_set_rx_mode(bp->dev);
                 bp->state = BNX2X_STATE_DIAG;
                 break;
@@ -6512,20 +6531,23 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 
         return 0;
 
-load_netif_stop:
-        bnx2x_napi_disable(bp);
-load_rings_free:
+load_error3:
+        bnx2x_int_disable_sync(bp, 1);
+        if (!BP_NOMCP(bp)) {
+                bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP);
+                bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
+        }
+        bp->port.pmf = 0;
         /* Free SKBs, SGEs, TPA pool and driver internals */
         bnx2x_free_skbs(bp);
         for_each_queue(bp, i)
                 bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
-load_int_disable:
-        bnx2x_int_disable_sync(bp, 1);
+load_error2:
         /* Release IRQs */
         bnx2x_free_irq(bp);
-load_error:
+load_error1:
+        bnx2x_napi_disable(bp);
         bnx2x_free_mem(bp);
-        bp->port.pmf = 0;
 
         /* TBD we really need to reset the chip
            if we want to recover from this */