bnx2x: Using macro for phy address

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 29 insertions, 79 deletions

diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index 74f4d1085a3e..c2b001031e7b 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -1547,10 +1547,7 @@ static u8 bnx2x_ext_phy_resove_fc(struct link_params *params,
         u8 ret = 0;
         u32 ext_phy_type;
         u8 port = params->port;
-        ext_phy_addr = ((params->ext_phy_config &
-                         PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                                PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-
+        ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
         ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
         /* read twice */
 
@@ -2011,9 +2008,8 @@ static void bnx2x_ext_phy_reset(struct link_params *params,
 {
         struct bnx2x *bp = params->bp;
         u32 ext_phy_type;
-        u8 ext_phy_addr = ((params->ext_phy_config &
-                            PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                           PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+        u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+
         DP(NETIF_MSG_LINK, "Port %x: bnx2x_ext_phy_reset\n", params->port);
         ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
         /* The PHY reset is controled by GPIO 1
@@ -2292,9 +2288,7 @@ static void bnx2x_bcm8072_external_rom_boot(struct link_params *params)
 {
         struct bnx2x *bp = params->bp;
         u8 port = params->port;
-        u8 ext_phy_addr = ((params->ext_phy_config &
-                             PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                            PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+        u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
         u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
 
         /* Need to wait 200ms after reset */
@@ -2342,9 +2336,7 @@ static u8 bnx2x_8073_is_snr_needed(struct link_params *params)
         /* This is only required for 8073A1, version 102 only */
 
         struct bnx2x *bp = params->bp;
-        u8 ext_phy_addr = ((params->ext_phy_config &
-                             PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                            PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+        u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
         u16 val;
 
         /* Read 8073 HW revision*/
@@ -2375,9 +2367,7 @@ static u8 bnx2x_8073_is_snr_needed(struct link_params *params)
 static u8 bnx2x_bcm8073_xaui_wa(struct link_params *params)
 {
         struct bnx2x *bp = params->bp;
-        u8 ext_phy_addr = ((params->ext_phy_config &
-                             PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                            PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+        u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
         u16 val, cnt, cnt1 ;
 
         bnx2x_cl45_read(bp, params->port,
@@ -2519,9 +2509,7 @@ static void bnx2x_bcm8726_external_rom_boot(struct link_params *params)
 {
         struct bnx2x *bp = params->bp;
         u8 port = params->port;
-        u8 ext_phy_addr = ((params->ext_phy_config &
-                             PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                            PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+        u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
         u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
 
         /* Need to wait 100ms after reset */
@@ -2607,9 +2595,7 @@ static u8 bnx2x_8726_read_sfp_module_eeprom(struct link_params *params,
         u16 val = 0;
         u16 i;
         u8 port = params->port;
-        u8 ext_phy_addr = ((params->ext_phy_config &
-                            PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                           PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+        u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
         u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
         if (byte_cnt > 16) {
                 DP(NETIF_MSG_LINK, "Reading from eeprom is"
@@ -2691,9 +2677,7 @@ static u8 bnx2x_8727_read_sfp_module_eeprom(struct link_params *params,
         struct bnx2x *bp = params->bp;
         u16 val, i;
         u8 port = params->port;
-        u8 ext_phy_addr = ((params->ext_phy_config &
-                            PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                           PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+        u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
         u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
 
         if (byte_cnt > 16) {
@@ -2946,9 +2930,7 @@ static u8 bnx2x_bcm8726_set_limiting_mode(struct link_params *params,
 {
         struct bnx2x *bp = params->bp;
         u8 port = params->port;
-        u8 ext_phy_addr = ((params->ext_phy_config &
-                            PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                           PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+        u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
         u16 cur_limiting_mode;
 
         bnx2x_cl45_read(bp, port,
@@ -3014,9 +2996,7 @@ static u8 bnx2x_bcm8727_set_limiting_mode(struct link_params *params,
         u8 port = params->port;
         u16 phy_identifier;
         u16 rom_ver2_val;
-        u8 ext_phy_addr = ((params->ext_phy_config &
-                            PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                           PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+        u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
 
         bnx2x_cl45_read(bp, port,
                        PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
@@ -3120,9 +3100,7 @@ static u8 bnx2x_sfp_module_detection(struct link_params *params)
         struct bnx2x *bp = params->bp;
         u16 edc_mode;
         u8 rc = 0;
-        u8 ext_phy_addr = ((params->ext_phy_config &
-                                PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                                PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+        u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
         u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
         u32 val = REG_RD(bp, params->shmem_base +
                              offsetof(struct shmem_region, dev_info.
@@ -3212,9 +3190,8 @@ void bnx2x_handle_module_detect_int(struct link_params *params)
                 else
                         DP(NETIF_MSG_LINK, "SFP+ module is not initialized\n");
         } else {
-                u8 ext_phy_addr = ((params->ext_phy_config &
-                                    PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                                   PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+                u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+
                 u32 ext_phy_type =
                         XGXS_EXT_PHY_TYPE(params->ext_phy_config);
                 u32 val = REG_RD(bp, params->shmem_base +
@@ -3238,9 +3215,7 @@ static void bnx2x_bcm807x_force_10G(struct link_params *params)
 {
         struct bnx2x *bp = params->bp;
         u8 port = params->port;
-        u8 ext_phy_addr = ((params->ext_phy_config &
-                                PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                                PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+        u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
         u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
 
         /* Force KR or KX */
@@ -3266,9 +3241,7 @@ static void bnx2x_bcm8073_set_xaui_low_power_mode(struct link_params *params)
         struct bnx2x *bp = params->bp;
         u8 port = params->port;
         u16 val;
-        u8 ext_phy_addr = ((params->ext_phy_config &
-                             PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                            PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+        u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
         u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
 
         bnx2x_cl45_read(bp, params->port,
@@ -3333,9 +3306,7 @@ static void bnx2x_8073_set_pause_cl37(struct link_params *params,
 
         struct bnx2x *bp = params->bp;
         u16 cl37_val;
-        u8 ext_phy_addr = ((params->ext_phy_config &
-                                PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                                PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+        u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
         u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
 
         bnx2x_cl45_read(bp, params->port,
@@ -3378,9 +3349,7 @@ static void bnx2x_ext_phy_set_pause(struct link_params *params,
 {
         struct bnx2x *bp = params->bp;
         u16 val;
-        u8 ext_phy_addr = ((params->ext_phy_config &
-                                PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                                PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+        u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
         u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
 
         /* read modify write pause advertizing */
@@ -3617,9 +3586,7 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
         u16 val = 0;
         u8 rc = 0;
         if (vars->phy_flags & PHY_XGXS_FLAG) {
-                ext_phy_addr = ((params->ext_phy_config &
-                                PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                                PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+                ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
 
                 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
                 /* Make sure that the soft reset is off (expect for the 8072:
@@ -4555,9 +4522,7 @@ static void bnx2x_8727_handle_mod_abs(struct link_params *params)
 {
         struct bnx2x *bp = params->bp;
         u16 mod_abs, rx_alarm_status;
-        u8 ext_phy_addr = ((params->ext_phy_config &
-                            PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                           PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+        u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
         u32 val = REG_RD(bp, params->shmem_base +
                              offsetof(struct shmem_region, dev_info.
                                       port_feature_config[params->port].
@@ -4657,10 +4622,7 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
         u8 ext_phy_link_up = 0;
         u8 port = params->port;
         if (vars->phy_flags & PHY_XGXS_FLAG) {
-                ext_phy_addr = ((params->ext_phy_config &
-                                PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                                PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-
+                ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
                 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
                 switch (ext_phy_type) {
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
@@ -5608,10 +5570,8 @@ static void bnx2x_ext_phy_loopback(struct link_params *params)
 
         if (params->switch_cfg == SWITCH_CFG_10G) {
                 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+                ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
                 /* CL37 Autoneg Enabled */
-                ext_phy_addr = ((params->ext_phy_config &
-                                        PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                                        PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
                 switch (ext_phy_type) {
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN:
@@ -6180,9 +6140,8 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
                 {
 
                         /* Disable Transmitter */
-                        u8 ext_phy_addr = ((params->ext_phy_config &
-                                    PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                                   PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+                        u8 ext_phy_addr =
+                                XGXS_EXT_PHY_ADDR(params->ext_phy_config);
                         if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
                             PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER)
                                 bnx2x_sfp_set_transmitter(bp, port,
@@ -6200,9 +6159,8 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
                         break;
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
                 {
-                        u8 ext_phy_addr = ((params->ext_phy_config &
-                                         PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                                         PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+                        u8 ext_phy_addr =
+                                XGXS_EXT_PHY_ADDR(params->ext_phy_config);
                         /* Set soft reset */
                         bnx2x_8726_reset_phy(bp, params->port, ext_phy_addr);
                         break;
@@ -6420,10 +6378,7 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, u32 shmem_base)
                               NIG_MASK_SERDES0_LINK_STATUS |
                               NIG_MASK_MI_INT));
 
-                ext_phy_addr[port] =
-                        ((ext_phy_config &
-                              PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                              PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+                ext_phy_addr[port] = XGXS_EXT_PHY_ADDR(ext_phy_config);
 
                 /* Need to take the phy out of low power mode in order
                         to write to access its registers */
@@ -6549,9 +6504,7 @@ static u8 bnx2x_8727_common_init_phy(struct bnx2x *bp, u32 shmem_base)
                               NIG_MASK_SERDES0_LINK_STATUS |
                               NIG_MASK_MI_INT));
 
-                ext_phy_addr[port] = ((ext_phy_config &
-                                        PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                                        PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+                ext_phy_addr[port] = XGXS_EXT_PHY_ADDR(ext_phy_config);
 
                 /* Reset the phy */
                 bnx2x_cl45_write(bp, port,
@@ -6609,10 +6562,7 @@ static u8 bnx2x_8726_common_init_phy(struct bnx2x *bp, u32 shmem_base)
                                         offsetof(struct shmem_region,
                         dev_info.port_hw_config[port].external_phy_config));
 
-                ext_phy_addr =
-                        ((ext_phy_config &
-                              PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                              PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+                ext_phy_addr = XGXS_EXT_PHY_ADDR(ext_phy_config);
                 DP(NETIF_MSG_LINK, "8726_common_init : ext_phy_addr = 0x%x\n",
                          ext_phy_addr);