Fix common misspellings

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>

1 files changed, 7 insertions, 7 deletions

diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index f2f367d4e74d..974ef2be36a5 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -2823,7 +2823,7 @@ static u16 bnx2x_wait_reset_complete(struct bnx2x *bp,
                                      struct link_params *params)
 {
         u16 cnt, ctrl;
-        /* Wait for soft reset to get cleared upto 1 sec */
+        /* Wait for soft reset to get cleared up to 1 sec */
         for (cnt = 0; cnt < 1000; cnt++) {
                 bnx2x_cl45_read(bp, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, &ctrl);
@@ -4141,7 +4141,7 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy,
                         val = (1<<5);
                         /*
                          * Note that 2.5G works only when used with 1G
-                         * advertisment
+                         * advertisement
                          */
                 } else
                         val = (1<<5);
@@ -4151,7 +4151,7 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy,
                         PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
                         val |= (1<<7);
 
-                /* Note that 2.5G works only when used with 1G advertisment */
+                /* Note that 2.5G works only when used with 1G advertisement */
                 if (phy->speed_cap_mask &
                         (PORT_HW_CFG_SPEED_CAPABILITY_D0_1G |
                          PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
@@ -5232,14 +5232,14 @@ static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy,
                 bnx2x_cl45_write(bp, phy,
                                  MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 1);
         } else {
-                /* Force 1Gbps using autoneg with 1G advertisment */
+                /* Force 1Gbps using autoneg with 1G advertisement */
 
                 /* Allow CL37 through CL73 */
                 DP(NETIF_MSG_LINK, "XGXS 8706 AutoNeg\n");
                 bnx2x_cl45_write(bp, phy,
                                  MDIO_AN_DEVAD, MDIO_AN_REG_CL37_CL73, 0x040c);
 
-                /* Enable Full-Duplex advertisment on CL37 */
+                /* Enable Full-Duplex advertisement on CL37 */
                 bnx2x_cl45_write(bp, phy,
                                  MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LP, 0x0020);
                 /* Enable CL37 AN */
@@ -6269,7 +6269,7 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy,
 
         switch (actual_phy_selection) {
         case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT:
-                /* Do nothing. Essentialy this is like the priority copper */
+                /* Do nothing. Essentially this is like the priority copper */
                 break;
         case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
                 val |= MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER;
@@ -7765,7 +7765,7 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
         REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
 
         msleep(10);
-        /* The PHY reset is controled by GPIO 1
+        /* The PHY reset is controlled by GPIO 1
          * Hold it as vars low
          */
          /* clear link led */