aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/au1000_eth.h
diff options
context:
space:
mode:
authorVladislav Zolotarov <vladz@broadcom.com>2008-08-13 18:50:00 -0400
committerDavid S. Miller <davem@davemloft.net>2008-08-13 19:02:04 -0400
commitda5a662a2326931bef25f0e534c9c1702f862399 (patch)
tree53bd5af8f3c24cdbb01959a3f3feca3af0bad655 /drivers/net/au1000_eth.h
parent471de716b782fb55ae0fdc040cf2722caffeeb94 (diff)
bnx2x: Load/Unload under traffic
Load/Unload under traffic Few issues were found when loading and unloading under traffic: - When receiving Tx interrupt call netif_wake_queue if the queue is stopped but the state is open - Check that interrupts are enabled before doing anything else on the msix_fp_int function - In nic_load, enable the interrupts only when needed and ready for it - Function stop_leading returns status since it can fail - Add 1ms delay when unloading the driver to validate that there are no open transactions that already started by the FW - Splitting the "has work" function into Tx and Rx so the same function will be used on unload and interrupts - Do not request for WoL if only resetting the device (save the time that it takes the FW to set the link after reset) - Fixing the device reset after iSCSI boot and before driver load - all internal buffers must be cleared before the driver is loaded Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/au1000_eth.h')
0 files changed, 0 insertions, 0 deletions