[ARM] Convert EBSA110 network driver to a platform driver

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 32 insertions, 9 deletions

diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
index 3d50e953faaa..877891a29aaa 100644
--- a/drivers/net/arm/am79c961a.c
+++ b/drivers/net/arm/am79c961a.c
@@ -26,11 +26,11 @@
 #include <linux/init.h>
 #include <linux/crc32.h>
 #include <linux/bitops.h>
+#include <linux/platform_device.h>
 
-#include <asm/system.h>
-#include <asm/irq.h>
 #include <asm/hardware.h>
 #include <asm/io.h>
+#include <asm/system.h>
 
 #define TX_BUFFERS 15
 #define RX_BUFFERS 25
@@ -280,10 +280,13 @@ static void am79c961_timer(unsigned long data)
         lnkstat = read_ireg(dev->base_addr, ISALED0) & ISALED0_LNKST;
         carrier = netif_carrier_ok(dev);
 
-        if (lnkstat && !carrier)
+        if (lnkstat && !carrier) {
                 netif_carrier_on(dev);
-        else if (!lnkstat && carrier)
+                printk("%s: link up\n", dev->name);
+        } else if (!lnkstat && carrier) {
                 netif_carrier_off(dev);
+                printk("%s: link down\n", dev->name);
+        }
 
         mod_timer(&priv->timer, jiffies + msecs_to_jiffies(500));
 }
@@ -665,17 +668,25 @@ static void __init am79c961_banner(void)
                 printk(KERN_INFO "%s", version);
 }
 
-static int __init am79c961_init(void)
+static int __init am79c961_probe(struct device *_dev)
 {
+        struct platform_device *pdev = to_platform_device(_dev);
+        struct resource *res;
         struct net_device *dev;
         struct dev_priv *priv;
         int i, ret;
 
+        res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+        if (!res)
+                return -ENODEV;
+
         dev = alloc_etherdev(sizeof(struct dev_priv));
         ret = -ENOMEM;
         if (!dev)
                 goto out;
 
+        SET_NETDEV_DEV(dev, &pdev->dev);
+
         priv = netdev_priv(dev);
 
         /*
@@ -683,8 +694,8 @@ static int __init am79c961_init(void)
          * The PNP initialisation should have been
          * done by the ether bootp loader.
          */
-        dev->base_addr = 0x220;
-        dev->irq = IRQ_EBSA110_ETHERNET;
+        dev->base_addr = res->start;
+        dev->irq = platform_get_irq(pdev, 0);
 
         ret = -ENODEV;
         if (!request_region(dev->base_addr, 0x18, dev->name))
@@ -705,11 +716,11 @@ static int __init am79c961_init(void)
             inb(dev->base_addr + 4) != 0x2b)
                 goto release;
 
-        am79c961_banner();
-
         for (i = 0; i < 6; i++)
                 dev->dev_addr[i] = inb(dev->base_addr + i * 2) & 0xff;
 
+        am79c961_banner();
+
         spin_lock_init(&priv->chip_lock);
         init_timer(&priv->timer);
         priv->timer.data = (unsigned long)dev;
@@ -732,6 +743,7 @@ static int __init am79c961_init(void)
         if (ret == 0) {
                 printk(KERN_INFO "%s: ether address ", dev->name);
 
+                /* Retrive and print the ethernet address. */
                 for (i = 0; i < 6; i++)
                         printk (i == 5 ? "%02x\n" : "%02x:", dev->dev_addr[i]);
 
@@ -746,4 +758,15 @@ out:
         return ret;
 }
 
+static struct device_driver am79c961_driver = {
+        .name           = "am79c961",
+        .bus            = &platform_bus_type,
+        .probe          = am79c961_probe,
+};
+
+static int __init am79c961_init(void)
+{
+        return driver_register(&am79c961_driver);
+}
+
 __initcall(am79c961_init);