Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 219 insertions, 0 deletions

diff --git a/drivers/net/arcnet/com20020-isa.c b/drivers/net/arcnet/com20020-isa.c
new file mode 100644
index 000000000000..9289e6103de5
--- /dev/null
+++ b/drivers/net/arcnet/com20020-isa.c
@@ -0,0 +1,219 @@
+/*
+ * Linux ARCnet driver - COM20020 chipset support
+ * 
+ * Written 1997 by David Woodhouse.
+ * Written 1994-1999 by Avery Pennarun.
+ * Written 1999-2000 by Martin Mares <mj@ucw.cz>.
+ * Derived from skeleton.c by Donald Becker.
+ *
+ * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
+ *  for sponsoring the further development of this driver.
+ *
+ * **********************
+ *
+ * The original copyright of skeleton.c was as follows:
+ *
+ * skeleton.c Written 1993 by Donald Becker.
+ * Copyright 1993 United States Government as represented by the
+ * Director, National Security Agency.  This software may only be used
+ * and distributed according to the terms of the GNU General Public License as
+ * modified by SRC, incorporated herein by reference.
+ *
+ * **********************
+ *
+ * For more details, see drivers/net/arcnet.c
+ *
+ * **********************
+ */
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/arcdevice.h>
+#include <linux/com20020.h>
+
+#include <asm/io.h>
+
+#define VERSION "arcnet: COM20020 ISA support (by David Woodhouse et al.)\n"
+
+
+/*
+ * We cannot (yet) probe for an IO mapped card, although we can check that
+ * it's where we were told it was, and even do autoirq.
+ */
+static int __init com20020isa_probe(struct net_device *dev)
+{
+        int ioaddr;
+        unsigned long airqmask;
+        struct arcnet_local *lp = dev->priv;
+        int err;
+
+        BUGLVL(D_NORMAL) printk(VERSION);
+
+        ioaddr = dev->base_addr;
+        if (!ioaddr) {
+                BUGMSG(D_NORMAL, "No autoprobe (yet) for IO mapped cards; you "
+                       "must specify the base address!\n");
+                return -ENODEV;
+        }
+        if (!request_region(ioaddr, ARCNET_TOTAL_SIZE, "arcnet (COM20020)")) {
+                BUGMSG(D_NORMAL, "IO region %xh-%xh already allocated.\n",
+                       ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1);
+                return -ENXIO;
+        }
+        if (ASTATUS() == 0xFF) {
+                BUGMSG(D_NORMAL, "IO address %x empty\n", ioaddr);
+                err = -ENODEV;
+                goto out;
+        }
+        if (com20020_check(dev)) {
+                err = -ENODEV;
+                goto out;
+        }
+
+        if (!dev->irq) {
+                /* if we do this, we're sure to get an IRQ since the
+                 * card has just reset and the NORXflag is on until
+                 * we tell it to start receiving.
+                 */
+                BUGMSG(D_INIT_REASONS, "intmask was %02Xh\n", inb(_INTMASK));
+                outb(0, _INTMASK);
+                airqmask = probe_irq_on();
+                outb(NORXflag, _INTMASK);
+                udelay(1);
+                outb(0, _INTMASK);
+                dev->irq = probe_irq_off(airqmask);
+
+                if (dev->irq <= 0) {
+                        BUGMSG(D_INIT_REASONS, "Autoprobe IRQ failed first time\n");
+                        airqmask = probe_irq_on();
+                        outb(NORXflag, _INTMASK);
+                        udelay(5);
+                        outb(0, _INTMASK);
+                        dev->irq = probe_irq_off(airqmask);
+                        if (dev->irq <= 0) {
+                                BUGMSG(D_NORMAL, "Autoprobe IRQ failed.\n");
+                                err = -ENODEV;
+                                goto out;
+                        }
+                }
+        }
+
+        lp->card_name = "ISA COM20020";
+        if ((err = com20020_found(dev, 0)) != 0)
+                goto out;
+
+        return 0;
+
+out:
+        release_region(ioaddr, ARCNET_TOTAL_SIZE);
+        return err;
+}
+
+static int node = 0;
+static int io = 0x0;            /* <--- EDIT THESE LINES FOR YOUR CONFIGURATION */
+static int irq = 0;             /* or use the insmod io= irq= shmem= options */
+static char device[9];          /* use eg. device="arc1" to change name */
+static int timeout = 3;
+static int backplane = 0;
+static int clockp = 0;
+static int clockm = 0;
+
+module_param(node, int, 0);
+module_param(io, int, 0);
+module_param(irq, int, 0);
+module_param_string(device, device, sizeof(device), 0);
+module_param(timeout, int, 0);
+module_param(backplane, int, 0);
+module_param(clockp, int, 0);
+module_param(clockm, int, 0);
+
+MODULE_LICENSE("GPL");
+
+static struct net_device *my_dev;
+
+static int __init com20020_init(void)
+{
+        struct net_device *dev;
+        struct arcnet_local *lp;
+
+        dev = alloc_arcdev(device);
+        if (!dev)
+                return -ENOMEM;
+
+        if (node && node != 0xff)
+                dev->dev_addr[0] = node;
+
+        lp = dev->priv;
+        lp->backplane = backplane;
+        lp->clockp = clockp & 7;
+        lp->clockm = clockm & 3;
+        lp->timeout = timeout & 3;
+        lp->hw.owner = THIS_MODULE;
+
+        dev->base_addr = io;
+        dev->irq = irq;
+
+        if (dev->irq == 2)
+                dev->irq = 9;
+
+        if (com20020isa_probe(dev)) {
+                free_netdev(dev);
+                return -EIO;
+        }
+
+        my_dev = dev;
+        return 0;
+}
+
+static void __exit com20020_exit(void)
+{
+        unregister_netdev(my_dev);
+        free_irq(my_dev->irq, my_dev);
+        release_region(my_dev->base_addr, ARCNET_TOTAL_SIZE);
+        free_netdev(my_dev);
+}
+
+#ifndef MODULE
+static int __init com20020isa_setup(char *s)
+{
+        int ints[8];
+
+        s = get_options(s, 8, ints);
+        if (!ints[0])
+                return 1;
+
+        switch (ints[0]) {
+        default:                /* ERROR */
+                printk("com90xx: Too many arguments.\n");
+        case 6:         /* Timeout */
+                timeout = ints[6];
+        case 5:         /* CKP value */
+                clockp = ints[5];
+        case 4:         /* Backplane flag */
+                backplane = ints[4];
+        case 3:         /* Node ID */
+                node = ints[3];
+        case 2:         /* IRQ */
+                irq = ints[2];
+        case 1:         /* IO address */
+                io = ints[1];
+        }
+        if (*s)
+                snprintf(device, sizeof(device), "%s", s);
+        return 1;
+}
+
+__setup("com20020=", com20020isa_setup);
+
+#endif                          /* MODULE */
+
+module_init(com20020_init)
+module_exit(com20020_exit)