Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 214 insertions, 0 deletions

diff --git a/drivers/net/8390.h b/drivers/net/8390.h
new file mode 100644
index 000000000000..599b68d8c45f
--- /dev/null
+++ b/drivers/net/8390.h
@@ -0,0 +1,214 @@
+/* Generic NS8390 register definitions. */
+/* This file is part of Donald Becker's 8390 drivers, and is distributed
+   under the same license. Auto-loading of 8390.o only in v2.2 - Paul G.
+   Some of these names and comments originated from the Crynwr
+   packet drivers, which are distributed under the GPL. */
+
+#ifndef _8390_h
+#define _8390_h
+
+#include <linux/config.h>
+#include <linux/if_ether.h>
+#include <linux/ioport.h>
+#include <linux/skbuff.h>
+
+#define TX_PAGES 12     /* Two Tx slots */
+
+#define ETHER_ADDR_LEN 6
+
+/* The 8390 specific per-packet-header format. */
+struct e8390_pkt_hdr {
+  unsigned char status; /* status */
+  unsigned char next;   /* pointer to next packet. */
+  unsigned short count; /* header + packet length in bytes */
+};
+
+#ifdef notdef
+extern int ei_debug;
+#else
+#define ei_debug 1
+#endif
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+extern void ei_poll(struct net_device *dev);
+#endif
+
+extern void NS8390_init(struct net_device *dev, int startp);
+extern int ei_open(struct net_device *dev);
+extern int ei_close(struct net_device *dev);
+extern irqreturn_t ei_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+extern struct net_device *__alloc_ei_netdev(int size);
+static inline struct net_device *alloc_ei_netdev(void)
+{
+        return __alloc_ei_netdev(0);
+}
+
+/* You have one of these per-board */
+struct ei_device {
+        const char *name;
+        void (*reset_8390)(struct net_device *);
+        void (*get_8390_hdr)(struct net_device *, struct e8390_pkt_hdr *, int);
+        void (*block_output)(struct net_device *, int, const unsigned char *, int);
+        void (*block_input)(struct net_device *, int, struct sk_buff *, int);
+        unsigned long rmem_start;
+        unsigned long rmem_end;
+        void __iomem *mem;
+        unsigned char mcfilter[8];
+        unsigned open:1;
+        unsigned word16:1;              /* We have the 16-bit (vs 8-bit) version of the card. */
+        unsigned bigendian:1;           /* 16-bit big endian mode. Do NOT */
+                                        /* set this on random 8390 clones! */
+        unsigned txing:1;               /* Transmit Active */
+        unsigned irqlock:1;             /* 8390's intrs disabled when '1'. */
+        unsigned dmaing:1;              /* Remote DMA Active */
+        unsigned char tx_start_page, rx_start_page, stop_page;
+        unsigned char current_page;     /* Read pointer in buffer  */
+        unsigned char interface_num;    /* Net port (AUI, 10bT.) to use. */
+        unsigned char txqueue;          /* Tx Packet buffer queue length. */
+        short tx1, tx2;                 /* Packet lengths for ping-pong tx. */
+        short lasttx;                   /* Alpha version consistency check. */
+        unsigned char reg0;             /* Register '0' in a WD8013 */
+        unsigned char reg5;             /* Register '5' in a WD8013 */
+        unsigned char saved_irq;        /* Original dev->irq value. */
+        struct net_device_stats stat;   /* The new statistics table. */
+        u32 *reg_offset;                /* Register mapping table */
+        spinlock_t page_lock;           /* Page register locks */
+        unsigned long priv;             /* Private field to store bus IDs etc. */
+};
+
+/* The maximum number of 8390 interrupt service routines called per IRQ. */
+#define MAX_SERVICE 12
+
+/* The maximum time waited (in jiffies) before assuming a Tx failed. (20ms) */
+#define TX_TIMEOUT (20*HZ/100)
+
+#define ei_status (*(struct ei_device *)netdev_priv(dev))
+
+/* Some generic ethernet register configurations. */
+#define E8390_TX_IRQ_MASK       0xa     /* For register EN0_ISR */
+#define E8390_RX_IRQ_MASK       0x5
+#define E8390_RXCONFIG          0x4     /* EN0_RXCR: broadcasts, no multicast,errors */
+#define E8390_RXOFF             0x20    /* EN0_RXCR: Accept no packets */
+#define E8390_TXCONFIG          0x00    /* EN0_TXCR: Normal transmit mode */
+#define E8390_TXOFF             0x02    /* EN0_TXCR: Transmitter off */
+
+/*  Register accessed at EN_CMD, the 8390 base addr.  */
+#define E8390_STOP      0x01    /* Stop and reset the chip */
+#define E8390_START     0x02    /* Start the chip, clear reset */
+#define E8390_TRANS     0x04    /* Transmit a frame */
+#define E8390_RREAD     0x08    /* Remote read */
+#define E8390_RWRITE    0x10    /* Remote write  */
+#define E8390_NODMA     0x20    /* Remote DMA */
+#define E8390_PAGE0     0x00    /* Select page chip registers */
+#define E8390_PAGE1     0x40    /* using the two high-order bits */
+#define E8390_PAGE2     0x80    /* Page 3 is invalid. */
+
+/*
+ *      Only generate indirect loads given a machine that needs them.
+ *      - removed AMIGA_PCMCIA from this list, handled as ISA io now
+ */
+ 
+#if defined(CONFIG_MAC) ||  \
+    defined(CONFIG_ZORRO8390) || defined(CONFIG_ZORRO8390_MODULE) || \
+    defined(CONFIG_HYDRA) || defined(CONFIG_HYDRA_MODULE)
+#define EI_SHIFT(x)     (ei_local->reg_offset[x])
+#undef inb
+#undef inb_p
+#undef outb
+#undef outb_p
+
+#define inb(port)   in_8(port)
+#define outb(val,port)  out_8(port,val)
+#define inb_p(port)   in_8(port)
+#define outb_p(val,port)  out_8(port,val)
+
+#elif defined(CONFIG_ARM_ETHERH) || defined(CONFIG_ARM_ETHERH_MODULE)
+#define EI_SHIFT(x)     (ei_local->reg_offset[x])
+#undef inb
+#undef inb_p
+#undef outb
+#undef outb_p
+
+#define inb(_p)         readb(_p)
+#define outb(_v,_p)     writeb(_v,_p)
+#define inb_p(_p)       inb(_p)
+#define outb_p(_v,_p)   outb(_v,_p)
+
+#elif defined(CONFIG_NET_CBUS) || defined(CONFIG_NE_H8300) || defined(CONFIG_NE_H8300_MODULE)
+#define EI_SHIFT(x)     (ei_local->reg_offset[x])
+#else
+#define EI_SHIFT(x)     (x)
+#endif
+
+#define E8390_CMD       EI_SHIFT(0x00)  /* The command register (for all pages) */
+/* Page 0 register offsets. */
+#define EN0_CLDALO      EI_SHIFT(0x01)  /* Low byte of current local dma addr  RD */
+#define EN0_STARTPG     EI_SHIFT(0x01)  /* Starting page of ring bfr WR */
+#define EN0_CLDAHI      EI_SHIFT(0x02)  /* High byte of current local dma addr  RD */
+#define EN0_STOPPG      EI_SHIFT(0x02)  /* Ending page +1 of ring bfr WR */
+#define EN0_BOUNDARY    EI_SHIFT(0x03)  /* Boundary page of ring bfr RD WR */
+#define EN0_TSR         EI_SHIFT(0x04)  /* Transmit status reg RD */
+#define EN0_TPSR        EI_SHIFT(0x04)  /* Transmit starting page WR */
+#define EN0_NCR         EI_SHIFT(0x05)  /* Number of collision reg RD */
+#define EN0_TCNTLO      EI_SHIFT(0x05)  /* Low  byte of tx byte count WR */
+#define EN0_FIFO        EI_SHIFT(0x06)  /* FIFO RD */
+#define EN0_TCNTHI      EI_SHIFT(0x06)  /* High byte of tx byte count WR */
+#define EN0_ISR         EI_SHIFT(0x07)  /* Interrupt status reg RD WR */
+#define EN0_CRDALO      EI_SHIFT(0x08)  /* low byte of current remote dma address RD */
+#define EN0_RSARLO      EI_SHIFT(0x08)  /* Remote start address reg 0 */
+#define EN0_CRDAHI      EI_SHIFT(0x09)  /* high byte, current remote dma address RD */
+#define EN0_RSARHI      EI_SHIFT(0x09)  /* Remote start address reg 1 */
+#define EN0_RCNTLO      EI_SHIFT(0x0a)  /* Remote byte count reg WR */
+#define EN0_RCNTHI      EI_SHIFT(0x0b)  /* Remote byte count reg WR */
+#define EN0_RSR         EI_SHIFT(0x0c)  /* rx status reg RD */
+#define EN0_RXCR        EI_SHIFT(0x0c)  /* RX configuration reg WR */
+#define EN0_TXCR        EI_SHIFT(0x0d)  /* TX configuration reg WR */
+#define EN0_COUNTER0    EI_SHIFT(0x0d)  /* Rcv alignment error counter RD */
+#define EN0_DCFG        EI_SHIFT(0x0e)  /* Data configuration reg WR */
+#define EN0_COUNTER1    EI_SHIFT(0x0e)  /* Rcv CRC error counter RD */
+#define EN0_IMR         EI_SHIFT(0x0f)  /* Interrupt mask reg WR */
+#define EN0_COUNTER2    EI_SHIFT(0x0f)  /* Rcv missed frame error counter RD */
+
+/* Bits in EN0_ISR - Interrupt status register */
+#define ENISR_RX        0x01    /* Receiver, no error */
+#define ENISR_TX        0x02    /* Transmitter, no error */
+#define ENISR_RX_ERR    0x04    /* Receiver, with error */
+#define ENISR_TX_ERR    0x08    /* Transmitter, with error */
+#define ENISR_OVER      0x10    /* Receiver overwrote the ring */
+#define ENISR_COUNTERS  0x20    /* Counters need emptying */
+#define ENISR_RDC       0x40    /* remote dma complete */
+#define ENISR_RESET     0x80    /* Reset completed */
+#define ENISR_ALL       0x3f    /* Interrupts we will enable */
+
+/* Bits in EN0_DCFG - Data config register */
+#define ENDCFG_WTS      0x01    /* word transfer mode selection */
+#define ENDCFG_BOS      0x02    /* byte order selection */
+
+/* Page 1 register offsets. */
+#define EN1_PHYS   EI_SHIFT(0x01)       /* This board's physical enet addr RD WR */
+#define EN1_PHYS_SHIFT(i)  EI_SHIFT(i+1) /* Get and set mac address */
+#define EN1_CURPAG EI_SHIFT(0x07)       /* Current memory page RD WR */
+#define EN1_MULT   EI_SHIFT(0x08)       /* Multicast filter mask array (8 bytes) RD WR */
+#define EN1_MULT_SHIFT(i)  EI_SHIFT(8+i) /* Get and set multicast filter */
+
+/* Bits in received packet status byte and EN0_RSR*/
+#define ENRSR_RXOK      0x01    /* Received a good packet */
+#define ENRSR_CRC       0x02    /* CRC error */
+#define ENRSR_FAE       0x04    /* frame alignment error */
+#define ENRSR_FO        0x08    /* FIFO overrun */
+#define ENRSR_MPA       0x10    /* missed pkt */
+#define ENRSR_PHY       0x20    /* physical/multicast address */
+#define ENRSR_DIS       0x40    /* receiver disable. set in monitor mode */
+#define ENRSR_DEF       0x80    /* deferring */
+
+/* Transmitted packet status, EN0_TSR. */
+#define ENTSR_PTX 0x01  /* Packet transmitted without error */
+#define ENTSR_ND  0x02  /* The transmit wasn't deferred. */
+#define ENTSR_COL 0x04  /* The transmit collided at least once. */
+#define ENTSR_ABT 0x08  /* The transmit collided 16 times, and was deferred. */
+#define ENTSR_CRS 0x10  /* The carrier sense was lost. */
+#define ENTSR_FU  0x20  /* A "FIFO underrun" occurred during transmit. */
+#define ENTSR_CDH 0x40  /* The collision detect "heartbeat" signal was lost. */
+#define ENTSR_OWC 0x80  /* There was an out-of-window collision. */
+
+#endif /* _8390_h */