diff options
| author | Anton Vorontsov <avorontsov@ru.mvista.com> | 2009-09-10 07:48:12 -0400 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2009-09-11 15:54:45 -0400 |
| commit | 864fdf884e82bacbe8ca5e93bd43393a61d2e2b4 (patch) | |
| tree | 53a45c507d77eb8cc33cd9226ebeac947119ede3 /drivers/net/3c503.c | |
| parent | 7de8ee787e8e10adaf5635bffab4ee19a7558afb (diff) | |
ucc_geth: Fix hangs after switching from full to half duplex
MPC8360 QE UCC ethernet controllers hang when changing link duplex
under a load (a bit of NFS activity is enough).
PHY: mdio@e0102120:00 - Link is Up - 1000/Full
sh-3.00# ethtool -s eth0 speed 100 duplex half autoneg off
PHY: mdio@e0102120:00 - Link is Down
PHY: mdio@e0102120:00 - Link is Up - 100/Half
NETDEV WATCHDOG: eth0 (ucc_geth): transmit queue 0 timed out
------------[ cut here ]------------
Badness at c01fcbd0 [verbose debug info unavailable]
NIP: c01fcbd0 LR: c01fcbd0 CTR: c0194e44
...
The cure is to disable the controller before changing speed/duplex
and enable it afterwards.
Though, disabling the controller might take quite a while, so we
better not grab any spinlocks in adjust_link(). Instead, we quiesce
the driver's activity, and only then disable the controller.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/3c503.c')
0 files changed, 0 insertions, 0 deletions