Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits)
  omap: zoom: host should not pull up wl1271's irq line
  arm: plat-omap: iommu: fix request_mem_region() error path
  OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430
  omap4: mux: Remove duplicate mux modes
  omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag
  omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set
  omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected
  omap4: board-omap4panda: Initialise the serial pads
  omap3: board-3430sdp: Initialise the serial pads
  omap4: board-4430sdp: Initialise the serial pads
  omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init
  omap2+: mux: Remove the use of IDLE flag
  omap2+: Add separate list for dynamic pads to mux
  perf: add OMAP support for the new power events
  OMAP4: Add IVA OPP enteries.
  OMAP4: Update Voltage Rail Values for MPU, IVA and CORE
  OMAP4: Enable 800 MHz and 1 GHz MPU-OPP
  OMAP3+: OPP: Replace voltage values with Macros
  OMAP3: wdtimer: Fix CORE idle transition
  Watchdog: omap_wdt: add fine grain runtime-pm
  ...

Fix up various conflicts in
 - arch/arm/mach-omap2/board-omap3evm.c
 - arch/arm/mach-omap2/clock3xxx_data.c
 - arch/arm/mach-omap2/usb-musb.c
 - arch/arm/plat-omap/include/plat/usb.h
 - drivers/usb/musb/musb_core.h

3 files changed, 287 insertions, 133 deletions

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 450afc5df0bd..4f6c06f16328 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -106,23 +106,6 @@ config MTD_NAND_OMAP2
         help
           Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
 
-config MTD_NAND_OMAP_PREFETCH
-        bool "GPMC prefetch support for NAND Flash device"
-        depends on MTD_NAND_OMAP2
-        default y
-        help
-         The NAND device can be accessed for Read/Write using GPMC PREFETCH engine
-         to improve the performance.
-
-config MTD_NAND_OMAP_PREFETCH_DMA
-        depends on MTD_NAND_OMAP_PREFETCH
-        bool "DMA mode"
-        default n
-        help
-         The GPMC PREFETCH engine can be configured eigther in MPU interrupt mode
-         or in DMA interrupt mode.
-         Say y for DMA mode or MPU mode will be used
-
 config MTD_NAND_IDS
         tristate
 
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 28af71c61834..7b8f1fffc528 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -11,6 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
+#include <linux/interrupt.h>
 #include <linux/jiffies.h>
 #include <linux/sched.h>
 #include <linux/mtd/mtd.h>
@@ -24,6 +25,7 @@
 #include <plat/nand.h>
 
 #define DRIVER_NAME     "omap2-nand"
+#define OMAP_NAND_TIMEOUT_MS    5000
 
 #define NAND_Ecc_P1e            (1 << 0)
 #define NAND_Ecc_P2e            (1 << 1)
@@ -96,26 +98,19 @@
 static const char *part_probes[] = { "cmdlinepart", NULL };
 #endif
 
-#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH
-static int use_prefetch = 1;
-
-/* "modprobe ... use_prefetch=0" etc */
-module_param(use_prefetch, bool, 0);
-MODULE_PARM_DESC(use_prefetch, "enable/disable use of PREFETCH");
-
-#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH_DMA
-static int use_dma = 1;
+/* oob info generated runtime depending on ecc algorithm and layout selected */
+static struct nand_ecclayout omap_oobinfo;
+/* Define some generic bad / good block scan pattern which are used
+ * while scanning a device for factory marked good / bad blocks
+ */
+static uint8_t scan_ff_pattern[] = { 0xff };
+static struct nand_bbt_descr bb_descrip_flashbased = {
+        .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES,
+        .offs = 0,
+        .len = 1,
+        .pattern = scan_ff_pattern,
+};
 
-/* "modprobe ... use_dma=0" etc */
-module_param(use_dma, bool, 0);
-MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
-#else
-static const int use_dma;
-#endif
-#else
-const int use_prefetch;
-static const int use_dma;
-#endif
 
 struct omap_nand_info {
         struct nand_hw_control          controller;
@@ -129,6 +124,13 @@ struct omap_nand_info {
         unsigned long                   phys_base;
         struct completion               comp;
         int                             dma_ch;
+        int                             gpmc_irq;
+        enum {
+                OMAP_NAND_IO_READ = 0,  /* read */
+                OMAP_NAND_IO_WRITE,     /* write */
+        } iomode;
+        u_char                          *buf;
+        int                                     buf_len;
 };
 
 /**
@@ -256,7 +258,8 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
         }
 
         /* configure and start prefetch transfer */
-        ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x0);
+        ret = gpmc_prefetch_enable(info->gpmc_cs,
+                        PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x0);
         if (ret) {
                 /* PFPW engine is busy, use cpu copy method */
                 if (info->nand.options & NAND_BUSWIDTH_16)
@@ -288,9 +291,10 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
 {
         struct omap_nand_info *info = container_of(mtd,
                                                 struct omap_nand_info, mtd);
-        uint32_t pref_count = 0, w_count = 0;
+        uint32_t w_count = 0;
         int i = 0, ret = 0;
         u16 *p;
+        unsigned long tim, limit;
 
         /* take care of subpage writes */
         if (len % 2 != 0) {
@@ -300,7 +304,8 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
         }
 
         /*  configure and start prefetch transfer */
-        ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x1);
+        ret = gpmc_prefetch_enable(info->gpmc_cs,
+                        PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x1);
         if (ret) {
                 /* PFPW engine is busy, use cpu copy method */
                 if (info->nand.options & NAND_BUSWIDTH_16)
@@ -316,15 +321,17 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
                                 iowrite16(*p++, info->nand.IO_ADDR_W);
                 }
                 /* wait for data to flushed-out before reset the prefetch */
-                do {
-                        pref_count = gpmc_read_status(GPMC_PREFETCH_COUNT);
-                } while (pref_count);
+                tim = 0;
+                limit = (loops_per_jiffy *
+                                        msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
+                while (gpmc_read_status(GPMC_PREFETCH_COUNT) && (tim++ < limit))
+                        cpu_relax();
+
                 /* disable and stop the PFPW engine */
                 gpmc_prefetch_reset(info->gpmc_cs);
         }
 }
 
-#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH_DMA
 /*
  * omap_nand_dma_cb: callback on the completion of dma transfer
  * @lch: logical channel
@@ -348,14 +355,15 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
 {
         struct omap_nand_info *info = container_of(mtd,
                                         struct omap_nand_info, mtd);
-        uint32_t prefetch_status = 0;
         enum dma_data_direction dir = is_write ? DMA_TO_DEVICE :
                                                         DMA_FROM_DEVICE;
         dma_addr_t dma_addr;
         int ret;
+        unsigned long tim, limit;
 
-        /* The fifo depth is 64 bytes. We have a sync at each frame and frame
-         * length is 64 bytes.
+        /* The fifo depth is 64 bytes max.
+         * But configure the FIFO-threahold to 32 to get a sync at each frame
+         * and frame length is 32 bytes.
          */
         int buf_len = len >> 6;
 
@@ -396,9 +404,10 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
                                         OMAP24XX_DMA_GPMC, OMAP_DMA_SRC_SYNC);
         }
         /*  configure and start prefetch transfer */
-        ret = gpmc_prefetch_enable(info->gpmc_cs, 0x1, len, is_write);
+        ret = gpmc_prefetch_enable(info->gpmc_cs,
+                        PREFETCH_FIFOTHRESHOLD_MAX, 0x1, len, is_write);
         if (ret)
-                /* PFPW engine is busy, use cpu copy methode */
+                /* PFPW engine is busy, use cpu copy method */
                 goto out_copy;
 
         init_completion(&info->comp);
@@ -407,10 +416,11 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
 
         /* setup and start DMA using dma_addr */
         wait_for_completion(&info->comp);
+        tim = 0;
+        limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
+        while (gpmc_read_status(GPMC_PREFETCH_COUNT) && (tim++ < limit))
+                cpu_relax();
 
-        do {
-                prefetch_status = gpmc_read_status(GPMC_PREFETCH_COUNT);
-        } while (prefetch_status);
         /* disable and stop the PFPW engine */
         gpmc_prefetch_reset(info->gpmc_cs);
 
@@ -426,14 +436,6 @@ out_copy:
                         : omap_write_buf8(mtd, (u_char *) addr, len);
         return 0;
 }
-#else
-static void omap_nand_dma_cb(int lch, u16 ch_status, void *data) {}
-static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
-                                        unsigned int len, int is_write)
-{
-        return 0;
-}
-#endif
 
 /**
  * omap_read_buf_dma_pref - read data from NAND controller into buffer
@@ -466,6 +468,157 @@ static void omap_write_buf_dma_pref(struct mtd_info *mtd,
                 omap_nand_dma_transfer(mtd, (u_char *) buf, len, 0x1);
 }
 
+/*
+ * omap_nand_irq - GMPC irq handler
+ * @this_irq: gpmc irq number
+ * @dev: omap_nand_info structure pointer is passed here
+ */
+static irqreturn_t omap_nand_irq(int this_irq, void *dev)
+{
+        struct omap_nand_info *info = (struct omap_nand_info *) dev;
+        u32 bytes;
+        u32 irq_stat;
+
+        irq_stat = gpmc_read_status(GPMC_GET_IRQ_STATUS);
+        bytes = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
+        bytes = bytes  & 0xFFFC; /* io in multiple of 4 bytes */
+        if (info->iomode == OMAP_NAND_IO_WRITE) { /* checks for write io */
+                if (irq_stat & 0x2)
+                        goto done;
+
+                if (info->buf_len && (info->buf_len < bytes))
+                        bytes = info->buf_len;
+                else if (!info->buf_len)
+                        bytes = 0;
+                iowrite32_rep(info->nand.IO_ADDR_W,
+                                                (u32 *)info->buf, bytes >> 2);
+                info->buf = info->buf + bytes;
+                info->buf_len -= bytes;
+
+        } else {
+                ioread32_rep(info->nand.IO_ADDR_R,
+                                                (u32 *)info->buf, bytes >> 2);
+                info->buf = info->buf + bytes;
+
+                if (irq_stat & 0x2)
+                        goto done;
+        }
+        gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, irq_stat);
+
+        return IRQ_HANDLED;
+
+done:
+        complete(&info->comp);
+        /* disable irq */
+        gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ, 0);
+
+        /* clear status */
+        gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, irq_stat);
+
+        return IRQ_HANDLED;
+}
+
+/*
+ * omap_read_buf_irq_pref - read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void omap_read_buf_irq_pref(struct mtd_info *mtd, u_char *buf, int len)
+{
+        struct omap_nand_info *info = container_of(mtd,
+                                                struct omap_nand_info, mtd);
+        int ret = 0;
+
+        if (len <= mtd->oobsize) {
+                omap_read_buf_pref(mtd, buf, len);
+                return;
+        }
+
+        info->iomode = OMAP_NAND_IO_READ;
+        info->buf = buf;
+        init_completion(&info->comp);
+
+        /*  configure and start prefetch transfer */
+        ret = gpmc_prefetch_enable(info->gpmc_cs,
+                        PREFETCH_FIFOTHRESHOLD_MAX/2, 0x0, len, 0x0);
+        if (ret)
+                /* PFPW engine is busy, use cpu copy method */
+                goto out_copy;
+
+        info->buf_len = len;
+        /* enable irq */
+        gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ,
+                (GPMC_IRQ_FIFOEVENTENABLE | GPMC_IRQ_COUNT_EVENT));
+
+        /* waiting for read to complete */
+        wait_for_completion(&info->comp);
+
+        /* disable and stop the PFPW engine */
+        gpmc_prefetch_reset(info->gpmc_cs);
+        return;
+
+out_copy:
+        if (info->nand.options & NAND_BUSWIDTH_16)
+                omap_read_buf16(mtd, buf, len);
+        else
+                omap_read_buf8(mtd, buf, len);
+}
+
+/*
+ * omap_write_buf_irq_pref - write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void omap_write_buf_irq_pref(struct mtd_info *mtd,
+                                        const u_char *buf, int len)
+{
+        struct omap_nand_info *info = container_of(mtd,
+                                                struct omap_nand_info, mtd);
+        int ret = 0;
+        unsigned long tim, limit;
+
+        if (len <= mtd->oobsize) {
+                omap_write_buf_pref(mtd, buf, len);
+                return;
+        }
+
+        info->iomode = OMAP_NAND_IO_WRITE;
+        info->buf = (u_char *) buf;
+        init_completion(&info->comp);
+
+        /* configure and start prefetch transfer : size=24 */
+        ret = gpmc_prefetch_enable(info->gpmc_cs,
+                        (PREFETCH_FIFOTHRESHOLD_MAX * 3) / 8, 0x0, len, 0x1);
+        if (ret)
+                /* PFPW engine is busy, use cpu copy method */
+                goto out_copy;
+
+        info->buf_len = len;
+        /* enable irq */
+        gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ,
+                        (GPMC_IRQ_FIFOEVENTENABLE | GPMC_IRQ_COUNT_EVENT));
+
+        /* waiting for write to complete */
+        wait_for_completion(&info->comp);
+        /* wait for data to flushed-out before reset the prefetch */
+        tim = 0;
+        limit = (loops_per_jiffy *  msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
+        while (gpmc_read_status(GPMC_PREFETCH_COUNT) && (tim++ < limit))
+                cpu_relax();
+
+        /* disable and stop the PFPW engine */
+        gpmc_prefetch_reset(info->gpmc_cs);
+        return;
+
+out_copy:
+        if (info->nand.options & NAND_BUSWIDTH_16)
+                omap_write_buf16(mtd, buf, len);
+        else
+                omap_write_buf8(mtd, buf, len);
+}
+
 /**
  * omap_verify_buf - Verify chip data against buffer
  * @mtd: MTD device structure
@@ -487,8 +640,6 @@ static int omap_verify_buf(struct mtd_info *mtd, const u_char * buf, int len)
         return 0;
 }
 
-#ifdef CONFIG_MTD_NAND_OMAP_HWECC
-
 /**
  * gen_true_ecc - This function will generate true ECC value
  * @ecc_buf: buffer to store ecc code
@@ -708,8 +859,6 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int mode)
         gpmc_enable_hwecc(info->gpmc_cs, mode, dev_width, info->nand.ecc.size);
 }
 
-#endif
-
 /**
  * omap_wait - wait until the command is done
  * @mtd: MTD device structure
@@ -779,6 +928,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
         struct omap_nand_info           *info;
         struct omap_nand_platform_data  *pdata;
         int                             err;
+        int                             i, offset;
 
         pdata = pdev->dev.platform_data;
         if (pdata == NULL) {
@@ -804,7 +954,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
         info->mtd.name          = dev_name(&pdev->dev);
         info->mtd.owner         = THIS_MODULE;
 
-        info->nand.options      |= pdata->devsize ? NAND_BUSWIDTH_16 : 0;
+        info->nand.options      = pdata->devsize;
         info->nand.options      |= NAND_SKIP_BBTSCAN;
 
         /* NAND write protect off */
@@ -842,28 +992,13 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
                 info->nand.chip_delay = 50;
         }
 
-        if (use_prefetch) {
-
+        switch (pdata->xfer_type) {
+        case NAND_OMAP_PREFETCH_POLLED:
                 info->nand.read_buf   = omap_read_buf_pref;
                 info->nand.write_buf  = omap_write_buf_pref;
-                if (use_dma) {
-                        err = omap_request_dma(OMAP24XX_DMA_GPMC, "NAND",
-                                omap_nand_dma_cb, &info->comp, &info->dma_ch);
-                        if (err < 0) {
-                                info->dma_ch = -1;
-                                printk(KERN_WARNING "DMA request failed."
-                                        " Non-dma data transfer mode\n");
-                        } else {
-                                omap_set_dma_dest_burst_mode(info->dma_ch,
-                                                OMAP_DMA_DATA_BURST_16);
-                                omap_set_dma_src_burst_mode(info->dma_ch,
-                                                OMAP_DMA_DATA_BURST_16);
-
-                                info->nand.read_buf   = omap_read_buf_dma_pref;
-                                info->nand.write_buf  = omap_write_buf_dma_pref;
-                        }
-                }
-        } else {
+                break;
+
+        case NAND_OMAP_POLLED:
                 if (info->nand.options & NAND_BUSWIDTH_16) {
                         info->nand.read_buf   = omap_read_buf16;
                         info->nand.write_buf  = omap_write_buf16;
@@ -871,20 +1006,61 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
                         info->nand.read_buf   = omap_read_buf8;
                         info->nand.write_buf  = omap_write_buf8;
                 }
+                break;
+
+        case NAND_OMAP_PREFETCH_DMA:
+                err = omap_request_dma(OMAP24XX_DMA_GPMC, "NAND",
+                                omap_nand_dma_cb, &info->comp, &info->dma_ch);
+                if (err < 0) {
+                        info->dma_ch = -1;
+                        dev_err(&pdev->dev, "DMA request failed!\n");
+                        goto out_release_mem_region;
+                } else {
+                        omap_set_dma_dest_burst_mode(info->dma_ch,
+                                        OMAP_DMA_DATA_BURST_16);
+                        omap_set_dma_src_burst_mode(info->dma_ch,
+                                        OMAP_DMA_DATA_BURST_16);
+
+                        info->nand.read_buf   = omap_read_buf_dma_pref;
+                        info->nand.write_buf  = omap_write_buf_dma_pref;
+                }
+                break;
+
+        case NAND_OMAP_PREFETCH_IRQ:
+                err = request_irq(pdata->gpmc_irq,
+                                omap_nand_irq, IRQF_SHARED, "gpmc-nand", info);
+                if (err) {
+                        dev_err(&pdev->dev, "requesting irq(%d) error:%d",
+                                                        pdata->gpmc_irq, err);
+                        goto out_release_mem_region;
+                } else {
+                        info->gpmc_irq       = pdata->gpmc_irq;
+                        info->nand.read_buf  = omap_read_buf_irq_pref;
+                        info->nand.write_buf = omap_write_buf_irq_pref;
+                }
+                break;
+
+        default:
+                dev_err(&pdev->dev,
+                        "xfer_type(%d) not supported!\n", pdata->xfer_type);
+                err = -EINVAL;
+                goto out_release_mem_region;
         }
-        info->nand.verify_buf = omap_verify_buf;
 
-#ifdef CONFIG_MTD_NAND_OMAP_HWECC
-        info->nand.ecc.bytes            = 3;
-        info->nand.ecc.size             = 512;
-        info->nand.ecc.calculate        = omap_calculate_ecc;
-        info->nand.ecc.hwctl            = omap_enable_hwecc;
-        info->nand.ecc.correct          = omap_correct_data;
-        info->nand.ecc.mode             = NAND_ECC_HW;
+        info->nand.verify_buf = omap_verify_buf;
 
-#else
-        info->nand.ecc.mode = NAND_ECC_SOFT;
-#endif
+        /* selsect the ecc type */
+        if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_DEFAULT)
+                info->nand.ecc.mode = NAND_ECC_SOFT;
+        else if ((pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW) ||
+                (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW_ROMCODE)) {
+                info->nand.ecc.bytes            = 3;
+                info->nand.ecc.size             = 512;
+                info->nand.ecc.calculate        = omap_calculate_ecc;
+                info->nand.ecc.hwctl            = omap_enable_hwecc;
+                info->nand.ecc.correct          = omap_correct_data;
+                info->nand.ecc.mode             = NAND_ECC_HW;
+        }
 
         /* DIP switches on some boards change between 8 and 16 bit
          * bus widths for flash.  Try the other width if the first try fails.
@@ -897,6 +1073,26 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
                 }
         }
 
+        /* rom code layout */
+        if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW_ROMCODE) {
+
+                if (info->nand.options & NAND_BUSWIDTH_16)
+                        offset = 2;
+                else {
+                        offset = 1;
+                        info->nand.badblock_pattern = &bb_descrip_flashbased;
+                }
+                omap_oobinfo.eccbytes = 3 * (info->mtd.oobsize/16);
+                for (i = 0; i < omap_oobinfo.eccbytes; i++)
+                        omap_oobinfo.eccpos[i] = i+offset;
+
+                omap_oobinfo.oobfree->offset = offset + omap_oobinfo.eccbytes;
+                omap_oobinfo.oobfree->length = info->mtd.oobsize -
+                                        (offset + omap_oobinfo.eccbytes);
+
+                info->nand.ecc.layout = &omap_oobinfo;
+        }
+
 #ifdef CONFIG_MTD_PARTITIONS
         err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
         if (err > 0)
@@ -926,9 +1122,12 @@ static int omap_nand_remove(struct platform_device *pdev)
                                                         mtd);
 
         platform_set_drvdata(pdev, NULL);
-        if (use_dma)
+        if (info->dma_ch != -1)
                 omap_free_dma(info->dma_ch);
 
+        if (info->gpmc_irq)
+                free_irq(info->gpmc_irq, info);
+
         /* Release NAND device, its internal structures and partitions */
         nand_release(&info->mtd);
         iounmap(info->nand.IO_ADDR_R);
@@ -947,16 +1146,8 @@ static struct platform_driver omap_nand_driver = {
 
 static int __init omap_nand_init(void)
 {
-        printk(KERN_INFO "%s driver initializing\n", DRIVER_NAME);
+        pr_info("%s driver initializing\n", DRIVER_NAME);
 
-        /* This check is required if driver is being
-         * loaded run time as a module
-         */
-        if ((1 == use_dma) && (0 == use_prefetch)) {
-                printk(KERN_INFO"Wrong parameters: 'use_dma' can not be 1 "
-                                "without use_prefetch'. Prefetch will not be"
-                                " used in either mode (mpu or dma)\n");
-        }
         return platform_driver_register(&omap_nand_driver);
 }
 
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index c849cacf4b2f..14a49abe057e 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -63,7 +63,7 @@ struct omap2_onenand {
         struct completion dma_done;
         int dma_channel;
         int freq;
-        int (*setup)(void __iomem *base, int freq);
+        int (*setup)(void __iomem *base, int *freq_ptr);
         struct regulator *regulator;
 };
 
@@ -148,11 +148,9 @@ static int omap2_onenand_wait(struct mtd_info *mtd, int state)
                         wait_err("controller error", state, ctrl, intr);
                         return -EIO;
                 }
-                if ((intr & intr_flags) != intr_flags) {
-                        wait_err("timeout", state, ctrl, intr);
-                        return -EIO;
-                }
-                return 0;
+                if ((intr & intr_flags) == intr_flags)
+                        return 0;
+                /* Continue in wait for interrupt branch */
         }
 
         if (state != FL_READING) {
@@ -581,7 +579,7 @@ static int __adjust_timing(struct device *dev, void *data)
 
         /* DMA is not in use so this is all that is needed */
         /* Revisit for OMAP3! */
-        ret = c->setup(c->onenand.base, c->freq);
+        ret = c->setup(c->onenand.base, &c->freq);
 
         return ret;
 }
@@ -673,7 +671,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
         }
 
         if (pdata->onenand_setup != NULL) {
-                r = pdata->onenand_setup(c->onenand.base, c->freq);
+                r = pdata->onenand_setup(c->onenand.base, &c->freq);
                 if (r < 0) {
                         dev_err(&pdev->dev, "Onenand platform setup failed: "
                                 "%d\n", r);
@@ -718,8 +716,8 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
         }
 
         dev_info(&pdev->dev, "initializing on CS%d, phys base 0x%08lx, virtual "
-                 "base %p\n", c->gpmc_cs, c->phys_base,
-                 c->onenand.base);
+                 "base %p, freq %d MHz\n", c->gpmc_cs, c->phys_base,
+                 c->onenand.base, c->freq);
 
         c->pdev = pdev;
         c->mtd.name = dev_name(&pdev->dev);
@@ -754,24 +752,6 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
         if ((r = onenand_scan(&c->mtd, 1)) < 0)
                 goto err_release_regulator;
 
-        switch ((c->onenand.version_id >> 4) & 0xf) {
-        case 0:
-                c->freq = 40;
-                break;
-        case 1:
-                c->freq = 54;
-                break;
-        case 2:
-                c->freq = 66;
-                break;
-        case 3:
-                c->freq = 83;
-                break;
-        case 4:
-                c->freq = 104;
-                break;
-        }
-
 #ifdef CONFIG_MTD_PARTITIONS
         r = parse_mtd_partitions(&c->mtd, part_probes, &c->parts, 0);
         if (r > 0)