mtd: nand: davinci: correct 4-bit error correction

On TI's DA830/OMAP-L137, DA850/OMAP-L138 and DM365, after setting the
4BITECC_ADD_CALC_START bit in the NAND Flash control register to 1 and
before waiting for the NAND Flash status register to be equal to 1, 2 or
3, we have to wait till the ECC HW goes to correction state.  Without this
wait, ECC correction calculations will not be proper.

This has been tested on DA830/OMAP-L137, DA850/OMAP-L138, DM355 and DM365
EVMs.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Acked-by: Sneha Narnakaje <nsnehaprabha@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

1 files changed, 17 insertions, 0 deletions

diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 9c9d893affeb..2ac7367afe77 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -311,7 +311,9 @@ static int nand_davinci_correct_4bit(struct mtd_info *mtd,
         unsigned short ecc10[8];
         unsigned short *ecc16;
         u32 syndrome[4];
+        u32 ecc_state;
         unsigned num_errors, corrected;
+        unsigned long timeo = jiffies + msecs_to_jiffies(100);
 
         /* All bytes 0xff?  It's an erased page; ignore its ECC. */
         for (i = 0; i < 10; i++) {
@@ -361,6 +363,21 @@ compare:
          */
         davinci_nand_writel(info, NANDFCR_OFFSET,
                         davinci_nand_readl(info, NANDFCR_OFFSET) | BIT(13));
+
+        /*
+         * ECC_STATE field reads 0x3 (Error correction complete) immediately
+         * after setting the 4BITECC_ADD_CALC_START bit. So if you immediately
+         * begin trying to poll for the state, you may fall right out of your
+         * loop without any of the correction calculations having taken place.
+         * The recommendation from the hardware team is to wait till ECC_STATE
+         * reads less than 4, which means ECC HW has entered correction state.
+         */
+        do {
+                ecc_state = (davinci_nand_readl(info,
+                                NANDFSR_OFFSET) >> 8) & 0x0f;
+                cpu_relax();
+        } while ((ecc_state < 4) && time_before(jiffies, timeo));
+
         for (;;) {
                 u32     fsr = davinci_nand_readl(info, NANDFSR_OFFSET);