[MTD] NAND Replace oobinfo by ecclayout

The nand_oobinfo structure is not fitting the newer error correction
demands anymore. Replace it by struct nand_ecclayout and fixup the users
all over the place. Keep the nand_oobinfo based ioctl for user space
compability reasons.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

1 files changed, 33 insertions, 19 deletions

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 20f79fec73b5..e922b829c4be 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -52,28 +52,33 @@
 #endif
 
 /* Define default oob placement schemes for large and small page devices */
-static struct nand_oobinfo nand_oob_8 = {
-        .useecc = MTD_NANDECC_AUTOPLACE,
+static struct nand_ecclayout nand_oob_8 = {
         .eccbytes = 3,
         .eccpos = {0, 1, 2},
-        .oobfree = {{3, 2}, {6, 2}}
+        .oobfree = {
+                {.offset = 3,
+                 .length = 2},
+                {.offset = 6,
+                 .length = 2}}
 };
 
-static struct nand_oobinfo nand_oob_16 = {
-        .useecc = MTD_NANDECC_AUTOPLACE,
+static struct nand_ecclayout nand_oob_16 = {
         .eccbytes = 6,
         .eccpos = {0, 1, 2, 3, 6, 7},
-        .oobfree = {{8, 8}}
+        .oobfree = {
+                {.offset = 8,
+                 . length = 8}}
 };
 
-static struct nand_oobinfo nand_oob_64 = {
-        .useecc = MTD_NANDECC_AUTOPLACE,
+static struct nand_ecclayout nand_oob_64 = {
         .eccbytes = 24,
         .eccpos = {
                    40, 41, 42, 43, 44, 45, 46, 47,
                    48, 49, 50, 51, 52, 53, 54, 55,
                    56, 57, 58, 59, 60, 61, 62, 63},
-        .oobfree = {{2, 38}}
+        .oobfree = {
+                {.offset = 2,
+                 .length = 38}}
 };
 
 /* This is used for padding purposes in nand_write_oob */
@@ -749,7 +754,7 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
         uint8_t *p = buf;
         uint8_t *ecc_calc = chip->buffers.ecccalc;
         uint8_t *ecc_code = chip->buffers.ecccode;
-        int *eccpos = chip->autooob->eccpos;
+        int *eccpos = chip->ecc.layout->eccpos;
 
         chip->read_buf(mtd, buf, mtd->writesize);
         chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -795,7 +800,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
         uint8_t *p = buf;
         uint8_t *ecc_calc = chip->buffers.ecccalc;
         uint8_t *ecc_code = chip->buffers.ecccode;
-        int *eccpos = chip->autooob->eccpos;
+        int *eccpos = chip->ecc.layout->eccpos;
 
         for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
                 chip->ecc.hwctl(mtd, NAND_ECC_READ);
@@ -1198,7 +1203,7 @@ static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
         int eccsteps = chip->ecc.steps;
         uint8_t *ecc_calc = chip->buffers.ecccalc;
         const uint8_t *p = buf;
-        int *eccpos = chip->autooob->eccpos;
+        int *eccpos = chip->ecc.layout->eccpos;
 
         if (chip->ecc.mode != NAND_ECC_NONE) {
                 /* Software ecc calculation */
@@ -1227,7 +1232,7 @@ static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
         int eccsteps = chip->ecc.steps;
         uint8_t *ecc_calc = chip->buffers.ecccalc;
         const uint8_t *p = buf;
-        int *eccpos = chip->autooob->eccpos;
+        int *eccpos = chip->ecc.layout->eccpos;
 
         for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
                 chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
@@ -2124,16 +2129,16 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
         /*
          * If no default placement scheme is given, select an appropriate one
          */
-        if (!chip->autooob) {
+        if (!chip->ecc.layout) {
                 switch (mtd->oobsize) {
                 case 8:
-                        chip->autooob = &nand_oob_8;
+                        chip->ecc.layout = &nand_oob_8;
                         break;
                 case 16:
-                        chip->autooob = &nand_oob_16;
+                        chip->ecc.layout = &nand_oob_16;
                         break;
                 case 64:
-                        chip->autooob = &nand_oob_64;
+                        chip->ecc.layout = &nand_oob_64;
                         break;
                 default:
                         printk(KERN_WARNING "No oob scheme defined for "
@@ -2198,6 +2203,15 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
         }
 
         /*
+         * The number of bytes available for a client to place data into
+         * the out of band area
+         */
+        chip->ecc.layout->oobavail = 0;
+        for (i = 0; chip->ecc.layout->oobfree[i].length; i++)
+                chip->ecc.layout->oobavail +=
+                        chip->ecc.layout->oobfree[i].length;
+
+        /*
          * Set the number of read / write steps for one page depending on ECC
          * mode
          */
@@ -2236,8 +2250,8 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
         mtd->block_isbad = nand_block_isbad;
         mtd->block_markbad = nand_block_markbad;
 
-        /* and make the autooob the default one */
-        mtd->oobinfo = chip->autooob;
+        /* propagate ecc.layout to mtd_info */
+        mtd->ecclayout = chip->ecc.layout;
 
         /* Check, if we should skip the bad block table scan */
         if (chip->options & NAND_SKIP_BBTSCAN)