[MTD] [NAND] rename at91_nand -> atmel_nand: file names and Kconfig

The AT91 NAND driver needs just a few tiny modifications to work on
AVR32 as well. Rename it atmel_nand to reflect this.

Also move the ECC register definitions into drivers/mtd/nand since they
are only useful to the atmel_nand driver, and get rid of the useless
filename at the top of each file.

Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

1 files changed, 36 insertions, 0 deletions

diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h
new file mode 100644
index 000000000000..170db869aacf
--- /dev/null
+++ b/drivers/mtd/nand/atmel_nand_ecc.h
@@ -0,0 +1,36 @@
+/*
+ * Error Corrected Code Controller (ECC) - System peripherals regsters.
+ * Based on AT91SAM9260 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef ATMEL_NAND_ECC_H
+#define ATMEL_NAND_ECC_H
+
+#define AT91_ECC_CR             0x00                    /* Control register */
+#define         AT91_ECC_RST            (1 << 0)                /* Reset parity */
+
+#define AT91_ECC_MR             0x04                    /* Mode register */
+#define         AT91_ECC_PAGESIZE       (3 << 0)                /* Page Size */
+#define                 AT91_ECC_PAGESIZE_528           (0)
+#define                 AT91_ECC_PAGESIZE_1056          (1)
+#define                 AT91_ECC_PAGESIZE_2112          (2)
+#define                 AT91_ECC_PAGESIZE_4224          (3)
+
+#define AT91_ECC_SR             0x08                    /* Status register */
+#define         AT91_ECC_RECERR         (1 << 0)                /* Recoverable Error */
+#define         AT91_ECC_ECCERR         (1 << 1)                /* ECC Single Bit Error */
+#define         AT91_ECC_MULERR         (1 << 2)                /* Multiple Errors */
+
+#define AT91_ECC_PR             0x0c                    /* Parity register */
+#define         AT91_ECC_BITADDR        (0xf << 0)              /* Bit Error Address */
+#define         AT91_ECC_WORDADDR       (0xfff << 4)            /* Word Error Address */
+
+#define AT91_ECC_NPR            0x10                    /* NParity register */
+#define         AT91_ECC_NPARITY        (0xffff << 0)           /* NParity */
+
+#endif