mtd: flash drivers set ecc strength

Flash device drivers initialize 'ecc_strength' in struct mtd_info, which is the
maximum number of bit errors that can be corrected in one writesize region.

Drivers using the nand interface intitialize 'strength' in struct nand_ecc_ctrl,
which is the maximum number of bit errors that can be corrected in one ecc step.
Nand infrastructure code translates this to 'ecc_strength'.

Also for nand drivers, the nand infrastructure code sets ecc.strength for ecc
modes NAND_ECC_SOFT, NAND_ECC_SOFT_BCH, and NAND_ECC_NONE.  It is set in the
driver for all other modes.

Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

1 files changed, 1 insertions, 0 deletions

diff --git a/drivers/mtd/nand/alauda.c b/drivers/mtd/nand/alauda.c
index ac38f73fde3b..4f20e1d8bef1 100644
--- a/drivers/mtd/nand/alauda.c
+++ b/drivers/mtd/nand/alauda.c
@@ -591,6 +591,7 @@ static int alauda_init_media(struct alauda *al)
         mtd->_block_isbad = alauda_isbad;
         mtd->priv = al;
         mtd->owner = THIS_MODULE;
+        mtd->ecc_strength = 1;
 
         err = mtd_device_register(mtd, NULL, 0);
         if (err) {