mtd: flash drivers set ecc strength

Flash device drivers initialize 'ecc_strength' in struct mtd_info, which is the
maximum number of bit errors that can be corrected in one writesize region.

Drivers using the nand interface intitialize 'strength' in struct nand_ecc_ctrl,
which is the maximum number of bit errors that can be corrected in one ecc step.
Nand infrastructure code translates this to 'ecc_strength'.

Also for nand drivers, the nand infrastructure code sets ecc.strength for ecc
modes NAND_ECC_SOFT, NAND_ECC_SOFT_BCH, and NAND_ECC_NONE.  It is set in the
driver for all other modes.

Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

1 files changed, 1 insertions, 0 deletions

diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 226d28a618d8..9651c06de0a9 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -516,6 +516,7 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
         }
 
         slave->mtd.ecclayout = master->ecclayout;
+        slave->mtd.ecc_strength = master->ecc_strength;
         if (master->_block_isbad) {
                 uint64_t offs = 0;