mtd: cfi_cmdset_0002: add 0xFF intolerance for M29W128G

The M29W128G Numonyx flash devices are intolerant to any 0xFF command:
in the Cfi_util.c the function cfi_qry_mode_off() (that resets the device
after the autoselect mode) must have a 0xF0 command after the 0xFF command.
This fix solves also the cause of the fixup_M29W128G_write_buffer() fix,
that can be removed now.
The following patch applies to 2.6.30 kernel.

Signed-off-by: Massimo Cirillo <maxcir@gmail.com>
Acked-by: Alexey Korolev <akorolev@infradead.org>
Cc: stable@kernel.org
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

1 files changed, 4 insertions, 0 deletions

diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
index 34d40e25d312..c5a84fda5410 100644..100755
--- a/drivers/mtd/chips/cfi_util.c
+++ b/drivers/mtd/chips/cfi_util.c
@@ -81,6 +81,10 @@ void __xipram cfi_qry_mode_off(uint32_t base, struct map_info *map,
 {
         cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
         cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
+        /* M29W128G flashes require an additional reset command
+           when exit qry mode */
+        if ((cfi->mfr == CFI_MFR_ST) && (cfi->id == 0x227E || cfi->id == 0x7E))
+                cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
 }
 EXPORT_SYMBOL_GPL(cfi_qry_mode_off);