mmc: add new sdhci-pxa driver for Marvell SoCs

Support Marvell PXA168/PXA910/MMP2 SD Host Controller.

Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Acked-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

3 files changed, 266 insertions, 0 deletions

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index c9c2520a0c4a..40b0fb9a47fb 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -155,6 +155,18 @@ config MMC_SDHCI_S3C
 
           If unsure, say N.
 
+config MMC_SDHCI_PXA
+        tristate "Marvell PXA168/PXA910/MMP2 SD Host Controller support"
+        depends on ARCH_PXA || ARCH_MMP
+        select MMC_SDHCI
+        select MMC_SDHCI_IO_ACCESSORS
+        help
+          This selects the Marvell(R) PXA168/PXA910/MMP2 SD Host Controller.
+          If you have a PXA168/PXA910/MMP2 platform with SD Host Controller
+          and a card slot, say Y or M here.
+
+          If unsure, say N.
+
 config MMC_SDHCI_SPEAR
         tristate "SDHCI support on ST SPEAr platform"
         depends on MMC_SDHCI && PLAT_SPEAR
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 6c4ac67f739f..7b645ff43b30 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_MMC_IMX)		+= imxmmc.o
 obj-$(CONFIG_MMC_MXC)           += mxcmmc.o
 obj-$(CONFIG_MMC_SDHCI)         += sdhci.o
 obj-$(CONFIG_MMC_SDHCI_PCI)     += sdhci-pci.o
+obj-$(CONFIG_MMC_SDHCI_PXA)     += sdhci-pxa.o
 obj-$(CONFIG_MMC_SDHCI_S3C)     += sdhci-s3c.o
 obj-$(CONFIG_MMC_SDHCI_SPEAR)   += sdhci-spear.o
 obj-$(CONFIG_MMC_WBSD)          += wbsd.o
diff --git a/drivers/mmc/host/sdhci-pxa.c b/drivers/mmc/host/sdhci-pxa.c
new file mode 100644
index 000000000000..fc406ac5d193
--- /dev/null
+++ b/drivers/mmc/host/sdhci-pxa.c
@@ -0,0 +1,253 @@
+/* linux/drivers/mmc/host/sdhci-pxa.c
+ *
+ * Copyright (C) 2010 Marvell International Ltd.
+ *              Zhangfei Gao <zhangfei.gao@marvell.com>
+ *              Kevin Wang <dwang4@marvell.com>
+ *              Mingwei Wang <mwwang@marvell.com>
+ *              Philip Rakity <prakity@marvell.com>
+ *              Mark Brown <markb@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* Supports:
+ * SDHCI support for MMP2/PXA910/PXA168
+ *
+ * Refer to sdhci-s3c.c.
+ */
+
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <plat/sdhci.h>
+#include "sdhci.h"
+
+#define DRIVER_NAME     "sdhci-pxa"
+
+#define SD_FIFO_PARAM           0x104
+#define DIS_PAD_SD_CLK_GATE     0x400
+
+struct sdhci_pxa {
+        struct sdhci_host               *host;
+        struct sdhci_pxa_platdata       *pdata;
+        struct clk                      *clk;
+        struct resource                 *res;
+
+        u8 clk_enable;
+};
+
+/*****************************************************************************\
+ *                                                                           *
+ * SDHCI core callbacks                                                      *
+ *                                                                           *
+\*****************************************************************************/
+static void set_clock(struct sdhci_host *host, unsigned int clock)
+{
+        struct sdhci_pxa *pxa = sdhci_priv(host);
+        u32 tmp = 0;
+
+        if (clock == 0) {
+                if (pxa->clk_enable) {
+                        clk_disable(pxa->clk);
+                        pxa->clk_enable = 0;
+                }
+        } else {
+                if (0 == pxa->clk_enable) {
+                        if (pxa->pdata->flags & PXA_FLAG_DISABLE_CLOCK_GATING) {
+                                tmp = readl(host->ioaddr + SD_FIFO_PARAM);
+                                tmp |= DIS_PAD_SD_CLK_GATE;
+                                writel(tmp, host->ioaddr + SD_FIFO_PARAM);
+                        }
+                        clk_enable(pxa->clk);
+                        pxa->clk_enable = 1;
+                }
+        }
+}
+
+static struct sdhci_ops sdhci_pxa_ops = {
+        .set_clock = set_clock,
+};
+
+/*****************************************************************************\
+ *                                                                           *
+ * Device probing/removal                                                    *
+ *                                                                           *
+\*****************************************************************************/
+
+static int __devinit sdhci_pxa_probe(struct platform_device *pdev)
+{
+        struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
+        struct device *dev = &pdev->dev;
+        struct sdhci_host *host = NULL;
+        struct resource *iomem = NULL;
+        struct sdhci_pxa *pxa = NULL;
+        int ret, irq;
+
+        irq = platform_get_irq(pdev, 0);
+        if (irq < 0) {
+                dev_err(dev, "no irq specified\n");
+                return irq;
+        }
+
+        iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!iomem) {
+                dev_err(dev, "no memory specified\n");
+                return -ENOENT;
+        }
+
+        host = sdhci_alloc_host(&pdev->dev, sizeof(struct sdhci_pxa));
+        if (IS_ERR(host)) {
+                dev_err(dev, "failed to alloc host\n");
+                return PTR_ERR(host);
+        }
+
+        pxa = sdhci_priv(host);
+        pxa->host = host;
+        pxa->pdata = pdata;
+        pxa->clk_enable = 0;
+
+        pxa->clk = clk_get(dev, "PXA-SDHCLK");
+        if (IS_ERR(pxa->clk)) {
+                dev_err(dev, "failed to get io clock\n");
+                ret = PTR_ERR(pxa->clk);
+                goto out;
+        }
+
+        pxa->res = request_mem_region(iomem->start, resource_size(iomem),
+                                      mmc_hostname(host->mmc));
+        if (!pxa->res) {
+                dev_err(&pdev->dev, "cannot request region\n");
+                ret = -EBUSY;
+                goto out;
+        }
+
+        host->ioaddr = ioremap(iomem->start, resource_size(iomem));
+        if (!host->ioaddr) {
+                dev_err(&pdev->dev, "failed to remap registers\n");
+                ret = -ENOMEM;
+                goto out;
+        }
+
+        host->hw_name = "MMC";
+        host->ops = &sdhci_pxa_ops;
+        host->irq = irq;
+        host->quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+
+        if (pdata->quirks)
+                host->quirks |= pdata->quirks;
+
+        ret = sdhci_add_host(host);
+        if (ret) {
+                dev_err(&pdev->dev, "failed to add host\n");
+                goto out;
+        }
+
+        if (pxa->pdata->max_speed)
+                host->mmc->f_max = pxa->pdata->max_speed;
+
+        platform_set_drvdata(pdev, host);
+
+        return 0;
+out:
+        if (host) {
+                clk_put(pxa->clk);
+                if (host->ioaddr)
+                        iounmap(host->ioaddr);
+                if (pxa->res)
+                        release_mem_region(pxa->res->start,
+                                           resource_size(pxa->res));
+                sdhci_free_host(host);
+        }
+
+        return ret;
+}
+
+static int __devexit sdhci_pxa_remove(struct platform_device *pdev)
+{
+        struct sdhci_host *host = platform_get_drvdata(pdev);
+        struct sdhci_pxa *pxa = sdhci_priv(host);
+        int dead = 0;
+        u32 scratch;
+
+        if (host) {
+                scratch = readl(host->ioaddr + SDHCI_INT_STATUS);
+                if (scratch == (u32)-1)
+                        dead = 1;
+
+                sdhci_remove_host(host, dead);
+
+                if (host->ioaddr)
+                        iounmap(host->ioaddr);
+                if (pxa->res)
+                        release_mem_region(pxa->res->start,
+                                           resource_size(pxa->res));
+                if (pxa->clk_enable) {
+                        clk_disable(pxa->clk);
+                        pxa->clk_enable = 0;
+                }
+                clk_put(pxa->clk);
+
+                sdhci_free_host(host);
+                platform_set_drvdata(pdev, NULL);
+        }
+
+        return 0;
+}
+
+#ifdef CONFIG_PM
+static int sdhci_pxa_suspend(struct platform_device *dev, pm_message_t state)
+{
+        struct sdhci_host *host = platform_get_drvdata(dev);
+
+        return sdhci_suspend_host(host, state);
+}
+
+static int sdhci_pxa_resume(struct platform_device *dev)
+{
+        struct sdhci_host *host = platform_get_drvdata(dev);
+
+        return sdhci_resume_host(host);
+}
+#else
+#define sdhci_pxa_suspend       NULL
+#define sdhci_pxa_resume        NULL
+#endif
+
+static struct platform_driver sdhci_pxa_driver = {
+        .probe          = sdhci_pxa_probe,
+        .remove         = __devexit_p(sdhci_pxa_remove),
+        .suspend        = sdhci_pxa_suspend,
+        .resume         = sdhci_pxa_resume,
+        .driver         = {
+                .name   = DRIVER_NAME,
+                .owner  = THIS_MODULE,
+        },
+};
+
+/*****************************************************************************\
+ *                                                                           *
+ * Driver init/exit                                                          *
+ *                                                                           *
+\*****************************************************************************/
+
+static int __init sdhci_pxa_init(void)
+{
+        return platform_driver_register(&sdhci_pxa_driver);
+}
+
+static void __exit sdhci_pxa_exit(void)
+{
+        platform_driver_unregister(&sdhci_pxa_driver);
+}
+
+module_init(sdhci_pxa_init);
+module_exit(sdhci_pxa_exit);
+
+MODULE_DESCRIPTION("SDH controller driver for PXA168/PXA910/MMP2");
+MODULE_AUTHOR("Zhangfei Gao <zhangfei.gao@marvell.com>");
+MODULE_LICENSE("GPL v2");