Merge branch 'x86/urgent' into x86/mce2

8 files changed, 80 insertions, 42 deletions

diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 45b1f430685f..513eb09a638f 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -584,7 +584,7 @@ static int mmc_blk_probe(struct mmc_card *card)
         if (err)
                 goto out;
 
-        string_get_size(get_capacity(md->disk) << 9, STRING_UNITS_2,
+        string_get_size((u64)get_capacity(md->disk) << 9, STRING_UNITS_2,
                         cap_str, sizeof(cap_str));
         printk(KERN_INFO "%s: %s %s %s %s\n",
                 md->disk->disk_name, mmc_card_id(card), mmc_card_name(card),
diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index b92b172074ee..b9f1e84897cc 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -494,7 +494,7 @@ static int mmc_test_basic_read(struct mmc_test_card *test)
 
         sg_init_one(&sg, test->buffer, 512);
 
-        ret = mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 1);
+        ret = mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 0);
         if (ret)
                 return ret;
 
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 76bfe16c09b1..2b1196e6142c 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -1548,9 +1548,10 @@ static bool filter(struct dma_chan *chan, void *slave)
 {
         struct dw_dma_slave *dws = slave;
 
-        if (dws->dma_dev == chan->device->dev)
+        if (dws->dma_dev == chan->device->dev) {
+                chan->private = dws;
                 return true;
-        else
+        } else
                 return false;
 }
 #endif
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index db37490f67ec..a631c81dce12 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -55,6 +55,7 @@
 #define VS30                    (1 << 25)
 #define SDVS18                  (0x5 << 9)
 #define SDVS30                  (0x6 << 9)
+#define SDVS33                  (0x7 << 9)
 #define SDVSCLR                 0xFFFFF1FF
 #define SDVSDET                 0x00000400
 #define AUTOIDLE                0x1
@@ -375,6 +376,32 @@ static void mmc_omap_report_irq(struct mmc_omap_host *host, u32 status)
 }
 #endif  /* CONFIG_MMC_DEBUG */
 
+/*
+ * MMC controller internal state machines reset
+ *
+ * Used to reset command or data internal state machines, using respectively
+ *  SRC or SRD bit of SYSCTL register
+ * Can be called from interrupt context
+ */
+static inline void mmc_omap_reset_controller_fsm(struct mmc_omap_host *host,
+                unsigned long bit)
+{
+        unsigned long i = 0;
+        unsigned long limit = (loops_per_jiffy *
+                                msecs_to_jiffies(MMC_TIMEOUT_MS));
+
+        OMAP_HSMMC_WRITE(host->base, SYSCTL,
+                         OMAP_HSMMC_READ(host->base, SYSCTL) | bit);
+
+        while ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit) &&
+                (i++ < limit))
+                cpu_relax();
+
+        if (OMAP_HSMMC_READ(host->base, SYSCTL) & bit)
+                dev_err(mmc_dev(host->mmc),
+                        "Timeout waiting on controller reset in %s\n",
+                        __func__);
+}
 
 /*
  * MMC controller IRQ handler
@@ -403,21 +430,17 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
                         (status & CMD_CRC)) {
                         if (host->cmd) {
                                 if (status & CMD_TIMEOUT) {
-                                        OMAP_HSMMC_WRITE(host->base, SYSCTL,
-                                                OMAP_HSMMC_READ(host->base,
-                                                                SYSCTL) | SRC);
-                                        while (OMAP_HSMMC_READ(host->base,
-                                                        SYSCTL) & SRC)
-                                                ;
-
+                                        mmc_omap_reset_controller_fsm(host, SRC);
                                         host->cmd->error = -ETIMEDOUT;
                                 } else {
                                         host->cmd->error = -EILSEQ;
                                 }
                                 end_cmd = 1;
                         }
-                        if (host->data)
+                        if (host->data) {
                                 mmc_dma_cleanup(host);
+                                mmc_omap_reset_controller_fsm(host, SRD);
+                        }
                 }
                 if ((status & DATA_TIMEOUT) ||
                         (status & DATA_CRC)) {
@@ -426,12 +449,7 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
                                         mmc_dma_cleanup(host);
                                 else
                                         host->data->error = -EILSEQ;
-                                OMAP_HSMMC_WRITE(host->base, SYSCTL,
-                                        OMAP_HSMMC_READ(host->base,
-                                                        SYSCTL) | SRD);
-                                while (OMAP_HSMMC_READ(host->base,
-                                                SYSCTL) & SRD)
-                                        ;
+                                mmc_omap_reset_controller_fsm(host, SRD);
                                 end_trans = 1;
                         }
                 }
@@ -456,13 +474,20 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
 }
 
 /*
- * Switch MMC operating voltage
+ * Switch MMC interface voltage ... only relevant for MMC1.
+ *
+ * MMC2 and MMC3 use fixed 1.8V levels, and maybe a transceiver.
+ * The MMC2 transceiver controls are used instead of DAT4..DAT7.
+ * Some chips, like eMMC ones, use internal transceivers.
  */
 static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd)
 {
         u32 reg_val = 0;
         int ret;
 
+        if (host->id != OMAP_MMC1_DEVID)
+                return 0;
+
         /* Disable the clocks */
         clk_disable(host->fclk);
         clk_disable(host->iclk);
@@ -485,19 +510,26 @@ static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd)
         OMAP_HSMMC_WRITE(host->base, HCTL,
                 OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR);
         reg_val = OMAP_HSMMC_READ(host->base, HCTL);
+
         /*
          * If a MMC dual voltage card is detected, the set_ios fn calls
          * this fn with VDD bit set for 1.8V. Upon card removal from the
          * slot, omap_mmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF.
          *
-         * Only MMC1 supports 3.0V.  MMC2 will not function if SDVS30 is
-         * set in HCTL.
+         * Cope with a bit of slop in the range ... per data sheets:
+         *  - "1.8V" for vdds_mmc1/vdds_mmc1a can be up to 2.45V max,
+         *    but recommended values are 1.71V to 1.89V
+         *  - "3.0V" for vdds_mmc1/vdds_mmc1a can be up to 3.5V max,
+         *    but recommended values are 2.7V to 3.3V
+         *
+         * Board setup code shouldn't permit anything very out-of-range.
+         * TWL4030-family VMMC1 and VSIM regulators are fine (avoiding the
+         * middle range) but VSIM can't power DAT4..DAT7 at more than 3V.
          */
-        if (host->id == OMAP_MMC1_DEVID && (((1 << vdd) == MMC_VDD_32_33) ||
-                                ((1 << vdd) == MMC_VDD_33_34)))
-                reg_val |= SDVS30;
-        if ((1 << vdd) == MMC_VDD_165_195)
+        if ((1 << vdd) <= MMC_VDD_23_24)
                 reg_val |= SDVS18;
+        else
+                reg_val |= SDVS30;
 
         OMAP_HSMMC_WRITE(host->base, HCTL, reg_val);
 
@@ -517,16 +549,15 @@ static void mmc_omap_detect(struct work_struct *work)
 {
         struct mmc_omap_host *host = container_of(work, struct mmc_omap_host,
                                                 mmc_carddetect_work);
+        struct omap_mmc_slot_data *slot = &mmc_slot(host);
+
+        host->carddetect = slot->card_detect(slot->card_detect_irq);
 
         sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch");
         if (host->carddetect) {
                 mmc_detect_change(host->mmc, (HZ * 200) / 1000);
         } else {
-                OMAP_HSMMC_WRITE(host->base, SYSCTL,
-                        OMAP_HSMMC_READ(host->base, SYSCTL) | SRD);
-                while (OMAP_HSMMC_READ(host->base, SYSCTL) & SRD)
-                        ;
-
+                mmc_omap_reset_controller_fsm(host, SRD);
                 mmc_detect_change(host->mmc, (HZ * 50) / 1000);
         }
 }
@@ -538,7 +569,6 @@ static irqreturn_t omap_mmc_cd_handler(int irq, void *dev_id)
 {
         struct mmc_omap_host *host = (struct mmc_omap_host *)dev_id;
 
-        host->carddetect = mmc_slot(host).card_detect(irq);
         schedule_work(&host->mmc_carddetect_work);
 
         return IRQ_HANDLED;
@@ -757,10 +787,14 @@ static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
         case MMC_POWER_OFF:
                 mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
                 /*
-                 * Reset bus voltage to 3V if it got set to 1.8V earlier.
+                 * Reset interface voltage to 3V if it's 1.8V now;
+                 * only relevant on MMC-1, the others always use 1.8V.
+                 *
                  * REVISIT: If we are able to detect cards after unplugging
                  * a 1.8V card, this code should not be needed.
                  */
+                if (host->id != OMAP_MMC1_DEVID)
+                        break;
                 if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
                         int vdd = fls(host->mmc->ocr_avail) - 1;
                         if (omap_mmc_switch_opcond(host, vdd) != 0)
@@ -784,7 +818,9 @@ static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
         }
 
         if (host->id == OMAP_MMC1_DEVID) {
-                /* Only MMC1 can operate at 3V/1.8V */
+                /* Only MMC1 can interface at 3V without some flavor
+                 * of external transceiver; but they all handle 1.8V.
+                 */
                 if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) &&
                         (ios->vdd == DUAL_VOLT_OCR_BIT)) {
                                 /*
@@ -1137,7 +1173,9 @@ static int omap_mmc_suspend(struct platform_device *pdev, pm_message_t state)
                                                 " level suspend\n");
                         }
 
-                        if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
+                        if (host->id == OMAP_MMC1_DEVID
+                                        && !(OMAP_HSMMC_READ(host->base, HCTL)
+                                                        & SDVSDET)) {
                                 OMAP_HSMMC_WRITE(host->base, HCTL,
                                         OMAP_HSMMC_READ(host->base, HCTL)
                                         & SDVSCLR);
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 35a98eec7414..f4a67c65d301 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -329,7 +329,7 @@ static void do_pio_write(struct s3cmci_host *host)
 
         to_ptr = host->base + host->sdidata;
 
-        while ((fifo = fifo_free(host))) {
+        while ((fifo = fifo_free(host)) > 3) {
                 if (!host->pio_bytes) {
                         res = get_data_buffer(host, &host->pio_bytes,
                                                         &host->pio_ptr);
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index f07255cb17ee..8cff5f5e7f86 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -144,8 +144,7 @@ static int jmicron_probe(struct sdhci_pci_chip *chip)
                           SDHCI_QUIRK_32BIT_DMA_SIZE |
                           SDHCI_QUIRK_32BIT_ADMA_SIZE |
                           SDHCI_QUIRK_RESET_AFTER_REQUEST |
-                          SDHCI_QUIRK_BROKEN_SMALL_PIO |
-                          SDHCI_QUIRK_FORCE_HIGHSPEED;
+                          SDHCI_QUIRK_BROKEN_SMALL_PIO;
         }
 
         /*
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 6b2d1f99af67..f52f3053ed92 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1636,8 +1636,7 @@ int sdhci_add_host(struct sdhci_host *host)
         mmc->f_max = host->max_clk;
         mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
 
-        if ((caps & SDHCI_CAN_DO_HISPD) ||
-                (host->quirks & SDHCI_QUIRK_FORCE_HIGHSPEED))
+        if (caps & SDHCI_CAN_DO_HISPD)
                 mmc->caps |= MMC_CAP_SD_HIGHSPEED;
 
         mmc->ocr_avail = 0;
@@ -1723,7 +1722,9 @@ int sdhci_add_host(struct sdhci_host *host)
 #endif
 
 #ifdef SDHCI_USE_LEDS_CLASS
-        host->led.name = mmc_hostname(mmc);
+        snprintf(host->led_name, sizeof(host->led_name),
+                "%s::", mmc_hostname(mmc));
+        host->led.name = host->led_name;
         host->led.brightness = LED_OFF;
         host->led.default_trigger = mmc_hostname(mmc);
         host->led.brightness_set = sdhci_led_control;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 3efba2363941..ebb83657e27a 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -208,8 +208,6 @@ struct sdhci_host {
 #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL                  (1<<12)
 /* Controller has an issue with buffer bits for small transfers */
 #define SDHCI_QUIRK_BROKEN_SMALL_PIO                    (1<<13)
-/* Controller supports high speed but doesn't have the caps bit set */
-#define SDHCI_QUIRK_FORCE_HIGHSPEED                     (1<<14)
 
         int                     irq;            /* Device IRQ */
         void __iomem *          ioaddr;         /* Mapped address */
@@ -222,6 +220,7 @@ struct sdhci_host {
 
 #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
         struct led_classdev     led;            /* LED control */
+        char   led_name[32];
 #endif
 
         spinlock_t              lock;           /* Mutex */