mmc: pxamci: set proper buswidth capabilities according to PXA flavor

From PXA27x, it is possible to do 4-bit data transfers.

Signed-off-by: Bridge Wu <mingqiao.wu@gmail.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

2 files changed, 10 insertions, 1 deletions

diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 67acc6a00895..6549f546df55 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -284,7 +284,7 @@ static int pxamci_data_done(struct pxamci_host *host, unsigned int stat)
         host->data = NULL;
         if (host->mrq->stop) {
                 pxamci_stop_clock(host);
-                pxamci_start_cmd(host, host->mrq->stop, 0);
+                pxamci_start_cmd(host, host->mrq->stop, host->cmdat);
         } else {
                 pxamci_finish_request(host, host->mrq);
         }
@@ -382,6 +382,11 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
                         host->cmdat |= CMDAT_INIT;
         }
 
+        if (ios->bus_width == MMC_BUS_WIDTH_4)
+                host->cmdat |= CMDAT_SD_4DAT;
+        else
+                host->cmdat &= ~CMDAT_SD_4DAT;
+
         pr_debug("PXAMCI: clkrt = %x cmdat = %x\n",
                  host->clkrt, host->cmdat);
 }
@@ -460,6 +465,9 @@ static int pxamci_probe(struct platform_device *pdev)
         mmc->ocr_avail = host->pdata ?
                          host->pdata->ocr_mask :
                          MMC_VDD_32_33|MMC_VDD_33_34;
+        mmc->caps = 0;
+        if (!cpu_is_pxa21x() && !cpu_is_pxa25x())
+                mmc->caps |= MMC_CAP_4_BIT_DATA;
 
         host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE, &host->sg_dma, GFP_KERNEL);
         if (!host->sg_cpu) {
diff --git a/drivers/mmc/host/pxamci.h b/drivers/mmc/host/pxamci.h
index df17c281278a..5655be823a00 100644
--- a/drivers/mmc/host/pxamci.h
+++ b/drivers/mmc/host/pxamci.h
@@ -25,6 +25,7 @@
 #define SPI_EN                  (1 << 0)
 
 #define MMC_CMDAT       0x0010
+#define CMDAT_SD_4DAT           (1 << 8)
 #define CMDAT_DMAEN             (1 << 7)
 #define CMDAT_INIT              (1 << 6)
 #define CMDAT_BUSY              (1 << 5)