diff options
| author | Dmitry Torokhov <dtor@insightbb.com> | 2007-05-08 01:31:11 -0400 |
|---|---|---|
| committer | Dmitry Torokhov <dtor@insightbb.com> | 2007-05-08 01:31:11 -0400 |
| commit | 334d0dd8b660557608142f0f77abc6812b48f08b (patch) | |
| tree | 9393a9aa099d7d42deda5f9f5054796c0c769be7 /drivers/mmc/card | |
| parent | 3f07d8796262f6aee135c8dd9a91210da9f888e4 (diff) | |
| parent | 5b94f675f57e4ff16c8fda09088d7480a84dcd91 (diff) | |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Diffstat (limited to 'drivers/mmc/card')
| -rw-r--r-- | drivers/mmc/card/Kconfig | 17 | ||||
| -rw-r--r-- | drivers/mmc/card/Makefile | 11 | ||||
| -rw-r--r-- | drivers/mmc/card/block.c | 665 | ||||
| -rw-r--r-- | drivers/mmc/card/queue.c | 252 | ||||
| -rw-r--r-- | drivers/mmc/card/queue.h | 32 |
5 files changed, 977 insertions, 0 deletions
diff --git a/drivers/mmc/card/Kconfig b/drivers/mmc/card/Kconfig new file mode 100644 index 000000000000..01a9fd376a1f --- /dev/null +++ b/drivers/mmc/card/Kconfig | |||
| @@ -0,0 +1,17 @@ | |||
| 1 | # | ||
| 2 | # MMC/SD card drivers | ||
| 3 | # | ||
| 4 | |||
| 5 | comment "MMC/SD Card Drivers" | ||
| 6 | depends MMC | ||
| 7 | |||
| 8 | config MMC_BLOCK | ||
| 9 | tristate "MMC block device driver" | ||
| 10 | depends on MMC && BLOCK | ||
| 11 | default y | ||
| 12 | help | ||
| 13 | Say Y here to enable the MMC block device driver support. | ||
| 14 | This provides a block device driver, which you can use to | ||
| 15 | mount the filesystem. Almost everyone wishing MMC support | ||
| 16 | should say Y or M here. | ||
| 17 | |||
diff --git a/drivers/mmc/card/Makefile b/drivers/mmc/card/Makefile new file mode 100644 index 000000000000..cf8c939867f5 --- /dev/null +++ b/drivers/mmc/card/Makefile | |||
| @@ -0,0 +1,11 @@ | |||
| 1 | # | ||
| 2 | # Makefile for MMC/SD card drivers | ||
| 3 | # | ||
| 4 | |||
| 5 | ifeq ($(CONFIG_MMC_DEBUG),y) | ||
| 6 | EXTRA_CFLAGS += -DDEBUG | ||
| 7 | endif | ||
| 8 | |||
| 9 | obj-$(CONFIG_MMC_BLOCK) += mmc_block.o | ||
| 10 | mmc_block-objs := block.o queue.o | ||
| 11 | |||
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c new file mode 100644 index 000000000000..d24ab234394c --- /dev/null +++ b/drivers/mmc/card/block.c | |||
| @@ -0,0 +1,665 @@ | |||
| 1 | /* | ||
| 2 | * Block driver for media (i.e., flash cards) | ||
| 3 | * | ||
| 4 | * Copyright 2002 Hewlett-Packard Company | ||
| 5 | * Copyright 2005-2007 Pierre Ossman | ||
| 6 | * | ||
| 7 | * Use consistent with the GNU GPL is permitted, | ||
| 8 | * provided that this copyright notice is | ||
| 9 | * preserved in its entirety in all copies and derived works. | ||
| 10 | * | ||
| 11 | * HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, | ||
| 12 | * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS | ||
| 13 | * FITNESS FOR ANY PARTICULAR PURPOSE. | ||
| 14 | * | ||
| 15 | * Many thanks to Alessandro Rubini and Jonathan Corbet! | ||
| 16 | * | ||
| 17 | * Author: Andrew Christian | ||
| 18 | * 28 May 2002 | ||
| 19 | */ | ||
| 20 | #include <linux/moduleparam.h> | ||
| 21 | #include <linux/module.h> | ||
| 22 | #include <linux/init.h> | ||
| 23 | |||
| 24 | #include <linux/kernel.h> | ||
| 25 | #include <linux/fs.h> | ||
| 26 | #include <linux/errno.h> | ||
| 27 | #include <linux/hdreg.h> | ||
| 28 | #include <linux/kdev_t.h> | ||
| 29 | #include <linux/blkdev.h> | ||
| 30 | #include <linux/mutex.h> | ||
| 31 | #include <linux/scatterlist.h> | ||
| 32 | |||
| 33 | #include <linux/mmc/card.h> | ||
| 34 | #include <linux/mmc/host.h> | ||
| 35 | #include <linux/mmc/mmc.h> | ||
| 36 | #include <linux/mmc/sd.h> | ||
| 37 | |||
| 38 | #include <asm/system.h> | ||
| 39 | #include <asm/uaccess.h> | ||
| 40 | |||
| 41 | #include "queue.h" | ||
| 42 | |||
| 43 | /* | ||
| 44 | * max 8 partitions per card | ||
| 45 | */ | ||
| 46 | #define MMC_SHIFT 3 | ||
| 47 | |||
| 48 | static int major; | ||
| 49 | |||
| 50 | /* | ||
| 51 | * There is one mmc_blk_data per slot. | ||
| 52 | */ | ||
| 53 | struct mmc_blk_data { | ||
| 54 | spinlock_t lock; | ||
| 55 | struct gendisk *disk; | ||
| 56 | struct mmc_queue queue; | ||
| 57 | |||
| 58 | unsigned int usage; | ||
| 59 | unsigned int block_bits; | ||
| 60 | unsigned int read_only; | ||
| 61 | }; | ||
| 62 | |||
| 63 | static DEFINE_MUTEX(open_lock); | ||
| 64 | |||
| 65 | static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk) | ||
| 66 | { | ||
| 67 | struct mmc_blk_data *md; | ||
| 68 | |||
| 69 | mutex_lock(&open_lock); | ||
| 70 | md = disk->private_data; | ||
| 71 | if (md && md->usage == 0) | ||
| 72 | md = NULL; | ||
| 73 | if (md) | ||
| 74 | md->usage++; | ||
| 75 | mutex_unlock(&open_lock); | ||
| 76 | |||
| 77 | return md; | ||
| 78 | } | ||
| 79 | |||
| 80 | static void mmc_blk_put(struct mmc_blk_data *md) | ||
| 81 | { | ||
| 82 | mutex_lock(&open_lock); | ||
| 83 | md->usage--; | ||
| 84 | if (md->usage == 0) { | ||
| 85 | put_disk(md->disk); | ||
| 86 | kfree(md); | ||
| 87 | } | ||
| 88 | mutex_unlock(&open_lock); | ||
| 89 | } | ||
| 90 | |||
| 91 | static int mmc_blk_open(struct inode *inode, struct file *filp) | ||
| 92 | { | ||
| 93 | struct mmc_blk_data *md; | ||
| 94 | int ret = -ENXIO; | ||
| 95 | |||
| 96 | md = mmc_blk_get(inode->i_bdev->bd_disk); | ||
| 97 | if (md) { | ||
| 98 | if (md->usage == 2) | ||
| 99 | check_disk_change(inode->i_bdev); | ||
| 100 | ret = 0; | ||
| 101 | |||
| 102 | if ((filp->f_mode & FMODE_WRITE) && md->read_only) | ||
| 103 | ret = -EROFS; | ||
| 104 | } | ||
| 105 | |||
| 106 | return ret; | ||
| 107 | } | ||
| 108 | |||
| 109 | static int mmc_blk_release(struct inode *inode, struct file *filp) | ||
| 110 | { | ||
| 111 | struct mmc_blk_data *md = inode->i_bdev->bd_disk->private_data; | ||
| 112 | |||
| 113 | mmc_blk_put(md); | ||
| 114 | return 0; | ||
| 115 | } | ||
| 116 | |||
| 117 | static int | ||
| 118 | mmc_blk_getgeo(struct block_device *bdev, struct hd_geometry *geo) | ||
| 119 | { | ||
| 120 | geo->cylinders = get_capacity(bdev->bd_disk) / (4 * 16); | ||
| 121 | geo->heads = 4; | ||
| 122 | geo->sectors = 16; | ||
| 123 | return 0; | ||
| 124 | } | ||
| 125 | |||
| 126 | static struct block_device_operations mmc_bdops = { | ||
| 127 | .open = mmc_blk_open, | ||
| 128 | .release = mmc_blk_release, | ||
| 129 | .getgeo = mmc_blk_getgeo, | ||
| 130 | .owner = THIS_MODULE, | ||
| 131 | }; | ||
| 132 | |||
| 133 | struct mmc_blk_request { | ||
| 134 | struct mmc_request mrq; | ||
| 135 | struct mmc_command cmd; | ||
| 136 | struct mmc_command stop; | ||
| 137 | struct mmc_data data; | ||
| 138 | }; | ||
| 139 | |||
| 140 | static int mmc_blk_prep_rq(struct mmc_queue *mq, struct request *req) | ||
| 141 | { | ||
| 142 | struct mmc_blk_data *md = mq->data; | ||
| 143 | int stat = BLKPREP_OK; | ||
| 144 | |||
| 145 | /* | ||
| 146 | * If we have no device, we haven't finished initialising. | ||
| 147 | */ | ||
| 148 | if (!md || !mq->card) { | ||
| 149 | printk(KERN_ERR "%s: killing request - no device/host\n", | ||
| 150 | req->rq_disk->disk_name); | ||
| 151 | stat = BLKPREP_KILL; | ||
| 152 | } | ||
| 153 | |||
| 154 | return stat; | ||
| 155 | } | ||
| 156 | |||
| 157 | static u32 mmc_sd_num_wr_blocks(struct mmc_card *card) | ||
| 158 | { | ||
| 159 | int err; | ||
| 160 | u32 blocks; | ||
| 161 | |||
| 162 | struct mmc_request mrq; | ||
| 163 | struct mmc_command cmd; | ||
| 164 | struct mmc_data data; | ||
| 165 | unsigned int timeout_us; | ||
| 166 | |||
| 167 | struct scatterlist sg; | ||
| 168 | |||
| 169 | memset(&cmd, 0, sizeof(struct mmc_command)); | ||
| 170 | |||
| 171 | cmd.opcode = MMC_APP_CMD; | ||
| 172 | cmd.arg = card->rca << 16; | ||
| 173 | cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; | ||
| 174 | |||
| 175 | err = mmc_wait_for_cmd(card->host, &cmd, 0); | ||
| 176 | if ((err != MMC_ERR_NONE) || !(cmd.resp[0] & R1_APP_CMD)) | ||
| 177 | return (u32)-1; | ||
| 178 | |||
| 179 | memset(&cmd, 0, sizeof(struct mmc_command)); | ||
| 180 | |||
| 181 | cmd.opcode = SD_APP_SEND_NUM_WR_BLKS; | ||
| 182 | cmd.arg = 0; | ||
| 183 | cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; | ||
| 184 | |||
| 185 | memset(&data, 0, sizeof(struct mmc_data)); | ||
| 186 | |||
| 187 | data.timeout_ns = card->csd.tacc_ns * 100; | ||
| 188 | data.timeout_clks = card->csd.tacc_clks * 100; | ||
| 189 | |||
| 190 | timeout_us = data.timeout_ns / 1000; | ||
| 191 | timeout_us += data.timeout_clks * 1000 / | ||
| 192 | (card->host->ios.clock / 1000); | ||
| 193 | |||
| 194 | if (timeout_us > 100000) { | ||
| 195 | data.timeout_ns = 100000000; | ||
| 196 | data.timeout_clks = 0; | ||
| 197 | } | ||
| 198 | |||
| 199 | data.blksz = 4; | ||
| 200 | data.blocks = 1; | ||
| 201 | data.flags = MMC_DATA_READ; | ||
| 202 | data.sg = &sg; | ||
| 203 | data.sg_len = 1; | ||
| 204 | |||
| 205 | memset(&mrq, 0, sizeof(struct mmc_request)); | ||
| 206 | |||
| 207 | mrq.cmd = &cmd; | ||
| 208 | mrq.data = &data; | ||
| 209 | |||
| 210 | sg_init_one(&sg, &blocks, 4); | ||
| 211 | |||
| 212 | mmc_wait_for_req(card->host, &mrq); | ||
| 213 | |||
| 214 | if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) | ||
| 215 | return (u32)-1; | ||
| 216 | |||
| 217 | blocks = ntohl(blocks); | ||
| 218 | |||
| 219 | return blocks; | ||
| 220 | } | ||
| 221 | |||
| 222 | static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) | ||
| 223 | { | ||
| 224 | struct mmc_blk_data *md = mq->data; | ||
| 225 | struct mmc_card *card = md->queue.card; | ||
| 226 | struct mmc_blk_request brq; | ||
| 227 | int ret = 1, sg_pos, data_size; | ||
| 228 | |||
| 229 | mmc_claim_host(card->host); | ||
| 230 | |||
| 231 | do { | ||
| 232 | struct mmc_command cmd; | ||
| 233 | u32 readcmd, writecmd; | ||
| 234 | |||
| 235 | memset(&brq, 0, sizeof(struct mmc_blk_request)); | ||
| 236 | brq.mrq.cmd = &brq.cmd; | ||
| 237 | brq.mrq.data = &brq.data; | ||
| 238 | |||
| 239 | brq.cmd.arg = req->sector; | ||
| 240 | if (!mmc_card_blockaddr(card)) | ||
| 241 | brq.cmd.arg <<= 9; | ||
| 242 | brq.cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; | ||
| 243 | brq.data.blksz = 1 << md->block_bits; | ||
| 244 | brq.stop.opcode = MMC_STOP_TRANSMISSION; | ||
| 245 | brq.stop.arg = 0; | ||
| 246 | brq.stop.flags = MMC_RSP_R1B | MMC_CMD_AC; | ||
| 247 | brq.data.blocks = req->nr_sectors >> (md->block_bits - 9); | ||
| 248 | if (brq.data.blocks > card->host->max_blk_count) | ||
| 249 | brq.data.blocks = card->host->max_blk_count; | ||
| 250 | |||
| 251 | mmc_set_data_timeout(&brq.data, card, rq_data_dir(req) != READ); | ||
| 252 | |||
| 253 | /* | ||
| 254 | * If the host doesn't support multiple block writes, force | ||
| 255 | * block writes to single block. SD cards are excepted from | ||
| 256 | * this rule as they support querying the number of | ||
| 257 | * successfully written sectors. | ||
| 258 | */ | ||
| 259 | if (rq_data_dir(req) != READ && | ||
| 260 | !(card->host->caps & MMC_CAP_MULTIWRITE) && | ||
| 261 | !mmc_card_sd(card)) | ||
| 262 | brq.data.blocks = 1; | ||
| 263 | |||
| 264 | if (brq.data.blocks > 1) { | ||
| 265 | brq.data.flags |= MMC_DATA_MULTI; | ||
| 266 | brq.mrq.stop = &brq.stop; | ||
| 267 | readcmd = MMC_READ_MULTIPLE_BLOCK; | ||
| 268 | writecmd = MMC_WRITE_MULTIPLE_BLOCK; | ||
| 269 | } else { | ||
| 270 | brq.mrq.stop = NULL; | ||
| 271 | readcmd = MMC_READ_SINGLE_BLOCK; | ||
| 272 | writecmd = MMC_WRITE_BLOCK; | ||
| 273 | } | ||
| 274 | |||
| 275 | if (rq_data_dir(req) == READ) { | ||
| 276 | brq.cmd.opcode = readcmd; | ||
| 277 | brq.data.flags |= MMC_DATA_READ; | ||
| 278 | } else { | ||
| 279 | brq.cmd.opcode = writecmd; | ||
| 280 | brq.data.flags |= MMC_DATA_WRITE; | ||
| 281 | } | ||
| 282 | |||
| 283 | brq.data.sg = mq->sg; | ||
| 284 | brq.data.sg_len = blk_rq_map_sg(req->q, req, brq.data.sg); | ||
| 285 | |||
| 286 | if (brq.data.blocks != | ||
| 287 | (req->nr_sectors >> (md->block_bits - 9))) { | ||
| 288 | data_size = brq.data.blocks * brq.data.blksz; | ||
| 289 | for (sg_pos = 0; sg_pos < brq.data.sg_len; sg_pos++) { | ||
| 290 | data_size -= mq->sg[sg_pos].length; | ||
| 291 | if (data_size <= 0) { | ||
| 292 | mq->sg[sg_pos].length += data_size; | ||
| 293 | sg_pos++; | ||
| 294 | break; | ||
| 295 | } | ||
| 296 | } | ||
| 297 | brq.data.sg_len = sg_pos; | ||
| 298 | } | ||
| 299 | |||
| 300 | mmc_wait_for_req(card->host, &brq.mrq); | ||
| 301 | if (brq.cmd.error) { | ||
| 302 | printk(KERN_ERR "%s: error %d sending read/write command\n", | ||
| 303 | req->rq_disk->disk_name, brq.cmd.error); | ||
| 304 | goto cmd_err; | ||
| 305 | } | ||
| 306 | |||
| 307 | if (brq.data.error) { | ||
| 308 | printk(KERN_ERR "%s: error %d transferring data\n", | ||
| 309 | req->rq_disk->disk_name, brq.data.error); | ||
| 310 | goto cmd_err; | ||
| 311 | } | ||
| 312 | |||
| 313 | if (brq.stop.error) { | ||
| 314 | printk(KERN_ERR "%s: error %d sending stop command\n", | ||
| 315 | req->rq_disk->disk_name, brq.stop.error); | ||
| 316 | goto cmd_err; | ||
| 317 | } | ||
| 318 | |||
| 319 | if (rq_data_dir(req) != READ) { | ||
| 320 | do { | ||
| 321 | int err; | ||
| 322 | |||
| 323 | cmd.opcode = MMC_SEND_STATUS; | ||
| 324 | cmd.arg = card->rca << 16; | ||
| 325 | cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; | ||
| 326 | err = mmc_wait_for_cmd(card->host, &cmd, 5); | ||
| 327 | if (err) { | ||
| 328 | printk(KERN_ERR "%s: error %d requesting status\n", | ||
| 329 | req->rq_disk->disk_name, err); | ||
| 330 | goto cmd_err; | ||
| 331 | } | ||
| 332 | } while (!(cmd.resp[0] & R1_READY_FOR_DATA)); | ||
| 333 | |||
| 334 | #if 0 | ||
| 335 | if (cmd.resp[0] & ~0x00000900) | ||
| 336 | printk(KERN_ERR "%s: status = %08x\n", | ||
| 337 | req->rq_disk->disk_name, cmd.resp[0]); | ||
| 338 | if (mmc_decode_status(cmd.resp)) | ||
| 339 | goto cmd_err; | ||
| 340 | #endif | ||
| 341 | } | ||
| 342 | |||
| 343 | /* | ||
| 344 | * A block was successfully transferred. | ||
| 345 | */ | ||
| 346 | spin_lock_irq(&md->lock); | ||
| 347 | ret = end_that_request_chunk(req, 1, brq.data.bytes_xfered); | ||
| 348 | if (!ret) { | ||
| 349 | /* | ||
| 350 | * The whole request completed successfully. | ||
| 351 | */ | ||
| 352 | add_disk_randomness(req->rq_disk); | ||
| 353 | blkdev_dequeue_request(req); | ||
| 354 | end_that_request_last(req, 1); | ||
| 355 | } | ||
| 356 | spin_unlock_irq(&md->lock); | ||
| 357 | } while (ret); | ||
| 358 | |||
| 359 | mmc_release_host(card->host); | ||
| 360 | |||
| 361 | return 1; | ||
| 362 | |||
| 363 | cmd_err: | ||
| 364 | /* | ||
| 365 | * If this is an SD card and we're writing, we can first | ||
| 366 | * mark the known good sectors as ok. | ||
| 367 | * | ||
| 368 | * If the card is not SD, we can still ok written sectors | ||
| 369 | * if the controller can do proper error reporting. | ||
| 370 | * | ||
| 371 | * For reads we just fail the entire chunk as that should | ||
| 372 | * be safe in all cases. | ||
| 373 | */ | ||
| 374 | if (rq_data_dir(req) != READ && mmc_card_sd(card)) { | ||
| 375 | u32 blocks; | ||
| 376 | unsigned int bytes; | ||
| 377 | |||
| 378 | blocks = mmc_sd_num_wr_blocks(card); | ||
| 379 | if (blocks != (u32)-1) { | ||
| 380 | if (card->csd.write_partial) | ||
| 381 | bytes = blocks << md->block_bits; | ||
| 382 | else | ||
| 383 | bytes = blocks << 9; | ||
| 384 | spin_lock_irq(&md->lock); | ||
| 385 | ret = end_that_request_chunk(req, 1, bytes); | ||
| 386 | spin_unlock_irq(&md->lock); | ||
| 387 | } | ||
| 388 | } else if (rq_data_dir(req) != READ && | ||
| 389 | (card->host->caps & MMC_CAP_MULTIWRITE)) { | ||
| 390 | spin_lock_irq(&md->lock); | ||
| 391 | ret = end_that_request_chunk(req, 1, brq.data.bytes_xfered); | ||
| 392 | spin_unlock_irq(&md->lock); | ||
| 393 | } | ||
| 394 | |||
| 395 | mmc_release_host(card->host); | ||
| 396 | |||
| 397 | spin_lock_irq(&md->lock); | ||
| 398 | while (ret) { | ||
| 399 | ret = end_that_request_chunk(req, 0, | ||
| 400 | req->current_nr_sectors << 9); | ||
| 401 | } | ||
| 402 | |||
| 403 | add_disk_randomness(req->rq_disk); | ||
| 404 | blkdev_dequeue_request(req); | ||
| 405 | end_that_request_last(req, 0); | ||
| 406 | spin_unlock_irq(&md->lock); | ||
| 407 | |||
| 408 | return 0; | ||
| 409 | } | ||
| 410 | |||
| 411 | #define MMC_NUM_MINORS (256 >> MMC_SHIFT) | ||
| 412 | |||
| 413 | static unsigned long dev_use[MMC_NUM_MINORS/(8*sizeof(unsigned long))]; | ||
| 414 | |||
| 415 | static inline int mmc_blk_readonly(struct mmc_card *card) | ||
| 416 | { | ||
| 417 | return mmc_card_readonly(card) || | ||
| 418 | !(card->csd.cmdclass & CCC_BLOCK_WRITE); | ||
| 419 | } | ||
| 420 | |||
| 421 | static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card) | ||
| 422 | { | ||
| 423 | struct mmc_blk_data *md; | ||
| 424 | int devidx, ret; | ||
| 425 | |||
| 426 | devidx = find_first_zero_bit(dev_use, MMC_NUM_MINORS); | ||
| 427 | if (devidx >= MMC_NUM_MINORS) | ||
| 428 | return ERR_PTR(-ENOSPC); | ||
| 429 | __set_bit(devidx, dev_use); | ||
| 430 | |||
| 431 | md = kmalloc(sizeof(struct mmc_blk_data), GFP_KERNEL); | ||
| 432 | if (!md) { | ||
| 433 | ret = -ENOMEM; | ||
| 434 | goto out; | ||
| 435 | } | ||
| 436 | |||
| 437 | memset(md, 0, sizeof(struct mmc_blk_data)); | ||
| 438 | |||
| 439 | /* | ||
| 440 | * Set the read-only status based on the supported commands | ||
| 441 | * and the write protect switch. | ||
| 442 | */ | ||
| 443 | md->read_only = mmc_blk_readonly(card); | ||
| 444 | |||
| 445 | /* | ||
| 446 | * Both SD and MMC specifications state (although a bit | ||
| 447 | * unclearly in the MMC case) that a block size of 512 | ||
| 448 | * bytes must always be supported by the card. | ||
| 449 | */ | ||
| 450 | md->block_bits = 9; | ||
| 451 | |||
| 452 | md->disk = alloc_disk(1 << MMC_SHIFT); | ||
| 453 | if (md->disk == NULL) { | ||
| 454 | ret = -ENOMEM; | ||
| 455 | goto err_kfree; | ||
| 456 | } | ||
| 457 | |||
| 458 | spin_lock_init(&md->lock); | ||
| 459 | md->usage = 1; | ||
| 460 | |||
| 461 | ret = mmc_init_queue(&md->queue, card, &md->lock); | ||
| 462 | if (ret) | ||
| 463 | goto err_putdisk; | ||
| 464 | |||
| 465 | md->queue.prep_fn = mmc_blk_prep_rq; | ||
| 466 | md->queue.issue_fn = mmc_blk_issue_rq; | ||
| 467 | md->queue.data = md; | ||
| 468 | |||
| 469 | md->disk->major = major; | ||
| 470 | md->disk->first_minor = devidx << MMC_SHIFT; | ||
| 471 | md->disk->fops = &mmc_bdops; | ||
| 472 | md->disk->private_data = md; | ||
| 473 | md->disk->queue = md->queue.queue; | ||
| 474 | md->disk->driverfs_dev = &card->dev; | ||
| 475 | |||
| 476 | /* | ||
| 477 | * As discussed on lkml, GENHD_FL_REMOVABLE should: | ||
| 478 | * | ||
| 479 | * - be set for removable media with permanent block devices | ||
| 480 | * - be unset for removable block devices with permanent media | ||
| 481 | * | ||
| 482 | * Since MMC block devices clearly fall under the second | ||
| 483 | * case, we do not set GENHD_FL_REMOVABLE. Userspace | ||
| 484 | * should use the block device creation/destruction hotplug | ||
| 485 | * messages to tell when the card is present. | ||
| 486 | */ | ||
| 487 | |||
| 488 | sprintf(md->disk->disk_name, "mmcblk%d", devidx); | ||
| 489 | |||
| 490 | blk_queue_hardsect_size(md->queue.queue, 1 << md->block_bits); | ||
| 491 | |||
| 492 | if (!mmc_card_sd(card) && mmc_card_blockaddr(card)) { | ||
| 493 | /* | ||
| 494 | * The EXT_CSD sector count is in number or 512 byte | ||
| 495 | * sectors. | ||
| 496 | */ | ||
| 497 | set_capacity(md->disk, card->ext_csd.sectors); | ||
| 498 | } else { | ||
| 499 | /* | ||
| 500 | * The CSD capacity field is in units of read_blkbits. | ||
| 501 | * set_capacity takes units of 512 bytes. | ||
| 502 | */ | ||
| 503 | set_capacity(md->disk, | ||
| 504 | card->csd.capacity << (card->csd.read_blkbits - 9)); | ||
| 505 | } | ||
| 506 | return md; | ||
| 507 | |||
| 508 | err_putdisk: | ||
| 509 | put_disk(md->disk); | ||
| 510 | err_kfree: | ||
| 511 | kfree(md); | ||
| 512 | out: | ||
| 513 | return ERR_PTR(ret); | ||
| 514 | } | ||
| 515 | |||
| 516 | static int | ||
| 517 | mmc_blk_set_blksize(struct mmc_blk_data *md, struct mmc_card *card) | ||
| 518 | { | ||
| 519 | struct mmc_command cmd; | ||
| 520 | int err; | ||
| 521 | |||
| 522 | /* Block-addressed cards ignore MMC_SET_BLOCKLEN. */ | ||
| 523 | if (mmc_card_blockaddr(card)) | ||
| 524 | return 0; | ||
| 525 | |||
| 526 | mmc_claim_host(card->host); | ||
| 527 | cmd.opcode = MMC_SET_BLOCKLEN; | ||
| 528 | cmd.arg = 1 << md->block_bits; | ||
| 529 | cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; | ||
| 530 | err = mmc_wait_for_cmd(card->host, &cmd, 5); | ||
| 531 | mmc_release_host(card->host); | ||
| 532 | |||
| 533 | if (err) { | ||
| 534 | printk(KERN_ERR "%s: unable to set block size to %d: %d\n", | ||
| 535 | md->disk->disk_name, cmd.arg, err); | ||
| 536 | return -EINVAL; | ||
| 537 | } | ||
| 538 | |||
| 539 | return 0; | ||
| 540 | } | ||
| 541 | |||
| 542 | static int mmc_blk_probe(struct mmc_card *card) | ||
| 543 | { | ||
| 544 | struct mmc_blk_data *md; | ||
| 545 | int err; | ||
| 546 | |||
| 547 | /* | ||
| 548 | * Check that the card supports the command class(es) we need. | ||
| 549 | */ | ||
| 550 | if (!(card->csd.cmdclass & CCC_BLOCK_READ)) | ||
| 551 | return -ENODEV; | ||
| 552 | |||
| 553 | md = mmc_blk_alloc(card); | ||
| 554 | if (IS_ERR(md)) | ||
| 555 | return PTR_ERR(md); | ||
| 556 | |||
| 557 | err = mmc_blk_set_blksize(md, card); | ||
| 558 | if (err) | ||
| 559 | goto out; | ||
| 560 | |||
| 561 | printk(KERN_INFO "%s: %s %s %lluKiB %s\n", | ||
| 562 | md->disk->disk_name, mmc_card_id(card), mmc_card_name(card), | ||
| 563 | (unsigned long long)(get_capacity(md->disk) >> 1), | ||
| 564 | md->read_only ? "(ro)" : ""); | ||
| 565 | |||
| 566 | mmc_set_drvdata(card, md); | ||
| 567 | add_disk(md->disk); | ||
| 568 | return 0; | ||
| 569 | |||
| 570 | out: | ||
| 571 | mmc_blk_put(md); | ||
| 572 | |||
| 573 | return err; | ||
| 574 | } | ||
| 575 | |||
| 576 | static void mmc_blk_remove(struct mmc_card *card) | ||
| 577 | { | ||
| 578 | struct mmc_blk_data *md = mmc_get_drvdata(card); | ||
| 579 | |||
| 580 | if (md) { | ||
| 581 | int devidx; | ||
| 582 | |||
| 583 | /* Stop new requests from getting into the queue */ | ||
| 584 | del_gendisk(md->disk); | ||
| 585 | |||
| 586 | /* Then flush out any already in there */ | ||
| 587 | mmc_cleanup_queue(&md->queue); | ||
| 588 | |||
| 589 | devidx = md->disk->first_minor >> MMC_SHIFT; | ||
| 590 | __clear_bit(devidx, dev_use); | ||
| 591 | |||
| 592 | mmc_blk_put(md); | ||
| 593 | } | ||
| 594 | mmc_set_drvdata(card, NULL); | ||
| 595 | } | ||
| 596 | |||
| 597 | #ifdef CONFIG_PM | ||
| 598 | static int mmc_blk_suspend(struct mmc_card *card, pm_message_t state) | ||
| 599 | { | ||
| 600 | struct mmc_blk_data *md = mmc_get_drvdata(card); | ||
| 601 | |||
| 602 | if (md) { | ||
| 603 | mmc_queue_suspend(&md->queue); | ||
| 604 | } | ||
| 605 | return 0; | ||
| 606 | } | ||
| 607 | |||
| 608 | static int mmc_blk_resume(struct mmc_card *card) | ||
| 609 | { | ||
| 610 | struct mmc_blk_data *md = mmc_get_drvdata(card); | ||
| 611 | |||
| 612 | if (md) { | ||
| 613 | mmc_blk_set_blksize(md, card); | ||
| 614 | mmc_queue_resume(&md->queue); | ||
| 615 | } | ||
| 616 | return 0; | ||
| 617 | } | ||
| 618 | #else | ||
| 619 | #define mmc_blk_suspend NULL | ||
| 620 | #define mmc_blk_resume NULL | ||
| 621 | #endif | ||
| 622 | |||
| 623 | static struct mmc_driver mmc_driver = { | ||
| 624 | .drv = { | ||
| 625 | .name = "mmcblk", | ||
| 626 | }, | ||
| 627 | .probe = mmc_blk_probe, | ||
| 628 | .remove = mmc_blk_remove, | ||
| 629 | .suspend = mmc_blk_suspend, | ||
| 630 | .resume = mmc_blk_resume, | ||
| 631 | }; | ||
| 632 | |||
| 633 | static int __init mmc_blk_init(void) | ||
| 634 | { | ||
| 635 | int res = -ENOMEM; | ||
| 636 | |||
| 637 | res = register_blkdev(major, "mmc"); | ||
| 638 | if (res < 0) { | ||
| 639 | printk(KERN_WARNING "Unable to get major %d for MMC media: %d\n", | ||
| 640 | major, res); | ||
| 641 | goto out; | ||
| 642 | } | ||
| 643 | if (major == 0) | ||
| 644 | major = res; | ||
| 645 | |||
| 646 | return mmc_register_driver(&mmc_driver); | ||
| 647 | |||
| 648 | out: | ||
| 649 | return res; | ||
| 650 | } | ||
| 651 | |||
| 652 | static void __exit mmc_blk_exit(void) | ||
| 653 | { | ||
| 654 | mmc_unregister_driver(&mmc_driver); | ||
| 655 | unregister_blkdev(major, "mmc"); | ||
| 656 | } | ||
| 657 | |||
| 658 | module_init(mmc_blk_init); | ||
| 659 | module_exit(mmc_blk_exit); | ||
| 660 | |||
| 661 | MODULE_LICENSE("GPL"); | ||
| 662 | MODULE_DESCRIPTION("Multimedia Card (MMC) block device driver"); | ||
| 663 | |||
| 664 | module_param(major, int, 0444); | ||
| 665 | MODULE_PARM_DESC(major, "specify the major device number for MMC block driver"); | ||
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c new file mode 100644 index 000000000000..2e77963db334 --- /dev/null +++ b/drivers/mmc/card/queue.c | |||
| @@ -0,0 +1,252 @@ | |||
| 1 | /* | ||
| 2 | * linux/drivers/mmc/queue.c | ||
| 3 | * | ||
| 4 | * Copyright (C) 2003 Russell King, All Rights Reserved. | ||
| 5 | * Copyright 2006-2007 Pierre Ossman | ||
| 6 | * | ||
| 7 | * This program is free software; you can redistribute it and/or modify | ||
| 8 | * it under the terms of the GNU General Public License version 2 as | ||
| 9 | * published by the Free Software Foundation. | ||
| 10 | * | ||
| 11 | */ | ||
| 12 | #include <linux/module.h> | ||
| 13 | #include <linux/blkdev.h> | ||
| 14 | #include <linux/kthread.h> | ||
| 15 | |||
| 16 | #include <linux/mmc/card.h> | ||
| 17 | #include <linux/mmc/host.h> | ||
| 18 | #include "queue.h" | ||
| 19 | |||
| 20 | #define MMC_QUEUE_SUSPENDED (1 << 0) | ||
| 21 | |||
| 22 | /* | ||
| 23 | * Prepare a MMC request. Essentially, this means passing the | ||
| 24 | * preparation off to the media driver. The media driver will | ||
| 25 | * create a mmc_io_request in req->special. | ||
| 26 | */ | ||
| 27 | static int mmc_prep_request(struct request_queue *q, struct request *req) | ||
| 28 | { | ||
| 29 | struct mmc_queue *mq = q->queuedata; | ||
| 30 | int ret = BLKPREP_KILL; | ||
| 31 | |||
| 32 | if (blk_special_request(req)) { | ||
| 33 | /* | ||
| 34 | * Special commands already have the command | ||
| 35 | * blocks already setup in req->special. | ||
| 36 | */ | ||
| 37 | BUG_ON(!req->special); | ||
| 38 | |||
| 39 | ret = BLKPREP_OK; | ||
| 40 | } else if (blk_fs_request(req) || blk_pc_request(req)) { | ||
| 41 | /* | ||
| 42 | * Block I/O requests need translating according | ||
| 43 | * to the protocol. | ||
| 44 | */ | ||
| 45 | ret = mq->prep_fn(mq, req); | ||
| 46 | } else { | ||
| 47 | /* | ||
| 48 | * Everything else is invalid. | ||
| 49 | */ | ||
| 50 | blk_dump_rq_flags(req, "MMC bad request"); | ||
| 51 | } | ||
| 52 | |||
| 53 | if (ret == BLKPREP_OK) | ||
| 54 | req->cmd_flags |= REQ_DONTPREP; | ||
| 55 | |||
| 56 | return ret; | ||
| 57 | } | ||
| 58 | |||
| 59 | static int mmc_queue_thread(void *d) | ||
| 60 | { | ||
| 61 | struct mmc_queue *mq = d; | ||
| 62 | struct request_queue *q = mq->queue; | ||
| 63 | |||
| 64 | /* | ||
| 65 | * Set iothread to ensure that we aren't put to sleep by | ||
| 66 | * the process freezing. We handle suspension ourselves. | ||
| 67 | */ | ||
| 68 | current->flags |= PF_MEMALLOC|PF_NOFREEZE; | ||
| 69 | |||
| 70 | down(&mq->thread_sem); | ||
| 71 | do { | ||
| 72 | struct request *req = NULL; | ||
| 73 | |||
| 74 | spin_lock_irq(q->queue_lock); | ||
| 75 | set_current_state(TASK_INTERRUPTIBLE); | ||
| 76 | if (!blk_queue_plugged(q)) | ||
| 77 | req = elv_next_request(q); | ||
| 78 | mq->req = req; | ||
| 79 | spin_unlock_irq(q->queue_lock); | ||
| 80 | |||
| 81 | if (!req) { | ||
| 82 | if (kthread_should_stop()) { | ||
| 83 | set_current_state(TASK_RUNNING); | ||
| 84 | break; | ||
| 85 | } | ||
| 86 | up(&mq->thread_sem); | ||
| 87 | schedule(); | ||
| 88 | down(&mq->thread_sem); | ||
| 89 | continue; | ||
| 90 | } | ||
| 91 | set_current_state(TASK_RUNNING); | ||
| 92 | |||
| 93 | mq->issue_fn(mq, req); | ||
| 94 | } while (1); | ||
| 95 | up(&mq->thread_sem); | ||
| 96 | |||
| 97 | return 0; | ||
| 98 | } | ||
| 99 | |||
| 100 | /* | ||
| 101 | * Generic MMC request handler. This is called for any queue on a | ||
| 102 | * particular host. When the host is not busy, we look for a request | ||
| 103 | * on any queue on this host, and attempt to issue it. This may | ||
| 104 | * not be the queue we were asked to process. | ||
| 105 | */ | ||
| 106 | static void mmc_request(request_queue_t *q) | ||
| 107 | { | ||
| 108 | struct mmc_queue *mq = q->queuedata; | ||
| 109 | struct request *req; | ||
| 110 | int ret; | ||
| 111 | |||
| 112 | if (!mq) { | ||
| 113 | printk(KERN_ERR "MMC: killing requests for dead queue\n"); | ||
| 114 | while ((req = elv_next_request(q)) != NULL) { | ||
| 115 | do { | ||
| 116 | ret = end_that_request_chunk(req, 0, | ||
| 117 | req->current_nr_sectors << 9); | ||
| 118 | } while (ret); | ||
| 119 | } | ||
| 120 | return; | ||
| 121 | } | ||
| 122 | |||
| 123 | if (!mq->req) | ||
| 124 | wake_up_process(mq->thread); | ||
| 125 | } | ||
| 126 | |||
| 127 | /** | ||
| 128 | * mmc_init_queue - initialise a queue structure. | ||
| 129 | * @mq: mmc queue | ||
| 130 | * @card: mmc card to attach this queue | ||
| 131 | * @lock: queue lock | ||
| 132 | * | ||
| 133 | * Initialise a MMC card request queue. | ||
| 134 | */ | ||
| 135 | int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock) | ||
| 136 | { | ||
| 137 | struct mmc_host *host = card->host; | ||
| 138 | u64 limit = BLK_BOUNCE_HIGH; | ||
| 139 | int ret; | ||
| 140 | |||
| 141 | if (mmc_dev(host)->dma_mask && *mmc_dev(host)->dma_mask) | ||
| 142 | limit = *mmc_dev(host)->dma_mask; | ||
| 143 | |||
| 144 | mq->card = card; | ||
| 145 | mq->queue = blk_init_queue(mmc_request, lock); | ||
| 146 | if (!mq->queue) | ||
| 147 | return -ENOMEM; | ||
| 148 | |||
| 149 | blk_queue_prep_rq(mq->queue, mmc_prep_request); | ||
| 150 | blk_queue_bounce_limit(mq->queue, limit); | ||
| 151 | blk_queue_max_sectors(mq->queue, host->max_req_size / 512); | ||
| 152 | blk_queue_max_phys_segments(mq->queue, host->max_phys_segs); | ||
| 153 | blk_queue_max_hw_segments(mq->queue, host->max_hw_segs); | ||
| 154 | blk_queue_max_segment_size(mq->queue, host->max_seg_size); | ||
| 155 | |||
| 156 | mq->queue->queuedata = mq; | ||
| 157 | mq->req = NULL; | ||
| 158 | |||
| 159 | mq->sg = kmalloc(sizeof(struct scatterlist) * host->max_phys_segs, | ||
| 160 | GFP_KERNEL); | ||
| 161 | if (!mq->sg) { | ||
| 162 | ret = -ENOMEM; | ||
| 163 | goto cleanup_queue; | ||
| 164 | } | ||
| 165 | |||
| 166 | init_MUTEX(&mq->thread_sem); | ||
| 167 | |||
| 168 | mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd"); | ||
| 169 | if (IS_ERR(mq->thread)) { | ||
| 170 | ret = PTR_ERR(mq->thread); | ||
| 171 | goto free_sg; | ||
| 172 | } | ||
| 173 | |||
| 174 | return 0; | ||
| 175 | |||
| 176 | free_sg: | ||
| 177 | kfree(mq->sg); | ||
| 178 | mq->sg = NULL; | ||
| 179 | cleanup_queue: | ||
| 180 | blk_cleanup_queue(mq->queue); | ||
| 181 | return ret; | ||
| 182 | } | ||
| 183 | |||
| 184 | void mmc_cleanup_queue(struct mmc_queue *mq) | ||
| 185 | { | ||
| 186 | request_queue_t *q = mq->queue; | ||
| 187 | unsigned long flags; | ||
| 188 | |||
| 189 | /* Mark that we should start throwing out stragglers */ | ||
| 190 | spin_lock_irqsave(q->queue_lock, flags); | ||
| 191 | q->queuedata = NULL; | ||
| 192 | spin_unlock_irqrestore(q->queue_lock, flags); | ||
| 193 | |||
| 194 | /* Make sure the queue isn't suspended, as that will deadlock */ | ||
| 195 | mmc_queue_resume(mq); | ||
| 196 | |||
| 197 | /* Then terminate our worker thread */ | ||
| 198 | kthread_stop(mq->thread); | ||
| 199 | |||
| 200 | kfree(mq->sg); | ||
| 201 | mq->sg = NULL; | ||
| 202 | |||
| 203 | blk_cleanup_queue(mq->queue); | ||
| 204 | |||
| 205 | mq->card = NULL; | ||
| 206 | } | ||
| 207 | EXPORT_SYMBOL(mmc_cleanup_queue); | ||
| 208 | |||
| 209 | /** | ||
| 210 | * mmc_queue_suspend - suspend a MMC request queue | ||
| 211 | * @mq: MMC queue to suspend | ||
| 212 | * | ||
| 213 | * Stop the block request queue, and wait for our thread to | ||
| 214 | * complete any outstanding requests. This ensures that we | ||
| 215 | * won't suspend while a request is being processed. | ||
| 216 | */ | ||
| 217 | void mmc_queue_suspend(struct mmc_queue *mq) | ||
| 218 | { | ||
| 219 | request_queue_t *q = mq->queue; | ||
| 220 | unsigned long flags; | ||
| 221 | |||
| 222 | if (!(mq->flags & MMC_QUEUE_SUSPENDED)) { | ||
| 223 | mq->flags |= MMC_QUEUE_SUSPENDED; | ||
| 224 | |||
| 225 | spin_lock_irqsave(q->queue_lock, flags); | ||
| 226 | blk_stop_queue(q); | ||
| 227 | spin_unlock_irqrestore(q->queue_lock, flags); | ||
| 228 | |||
| 229 | down(&mq->thread_sem); | ||
| 230 | } | ||
| 231 | } | ||
| 232 | |||
| 233 | /** | ||
| 234 | * mmc_queue_resume - resume a previously suspended MMC request queue | ||
| 235 | * @mq: MMC queue to resume | ||
| 236 | */ | ||
| 237 | void mmc_queue_resume(struct mmc_queue *mq) | ||
| 238 | { | ||
| 239 | request_queue_t *q = mq->queue; | ||
| 240 | unsigned long flags; | ||
| 241 | |||
| 242 | if (mq->flags & MMC_QUEUE_SUSPENDED) { | ||
| 243 | mq->flags &= ~MMC_QUEUE_SUSPENDED; | ||
| 244 | |||
| 245 | up(&mq->thread_sem); | ||
| 246 | |||
| 247 | spin_lock_irqsave(q->queue_lock, flags); | ||
| 248 | blk_start_queue(q); | ||
| 249 | spin_unlock_irqrestore(q->queue_lock, flags); | ||
| 250 | } | ||
| 251 | } | ||
| 252 | |||
diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h new file mode 100644 index 000000000000..c9f139e764f6 --- /dev/null +++ b/drivers/mmc/card/queue.h | |||
| @@ -0,0 +1,32 @@ | |||
| 1 | #ifndef MMC_QUEUE_H | ||
| 2 | #define MMC_QUEUE_H | ||
| 3 | |||
| 4 | struct request; | ||
| 5 | struct task_struct; | ||
| 6 | |||
| 7 | struct mmc_queue { | ||
| 8 | struct mmc_card *card; | ||
| 9 | struct task_struct *thread; | ||
| 10 | struct semaphore thread_sem; | ||
| 11 | unsigned int flags; | ||
| 12 | struct request *req; | ||
| 13 | int (*prep_fn)(struct mmc_queue *, struct request *); | ||
| 14 | int (*issue_fn)(struct mmc_queue *, struct request *); | ||
| 15 | void *data; | ||
| 16 | struct request_queue *queue; | ||
| 17 | struct scatterlist *sg; | ||
| 18 | }; | ||
| 19 | |||
| 20 | struct mmc_io_request { | ||
| 21 | struct request *rq; | ||
| 22 | int num; | ||
| 23 | struct mmc_command selcmd; /* mmc_queue private */ | ||
| 24 | struct mmc_command cmd[4]; /* max 4 commands */ | ||
| 25 | }; | ||
| 26 | |||
| 27 | extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *); | ||
| 28 | extern void mmc_cleanup_queue(struct mmc_queue *); | ||
| 29 | extern void mmc_queue_suspend(struct mmc_queue *); | ||
| 30 | extern void mmc_queue_resume(struct mmc_queue *); | ||
| 31 | |||
| 32 | #endif | ||
