Merge branch 'linus' into core/percpu

Conflicts:
	arch/x86/kernel/setup_percpu.c

1 files changed, 582 insertions, 0 deletions

diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
new file mode 100644
index 000000000000..d4775528abc6
--- /dev/null
+++ b/drivers/misc/eeprom/at24.c
@@ -0,0 +1,582 @@
+/*
+ * at24.c - handle most I2C EEPROMs
+ *
+ * Copyright (C) 2005-2007 David Brownell
+ * Copyright (C) 2008 Wolfram Sang, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+#include <linux/mod_devicetable.h>
+#include <linux/log2.h>
+#include <linux/bitops.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+/*
+ * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable.
+ * Differences between different vendor product lines (like Atmel AT24C or
+ * MicroChip 24LC, etc) won't much matter for typical read/write access.
+ * There are also I2C RAM chips, likewise interchangeable. One example
+ * would be the PCF8570, which acts like a 24c02 EEPROM (256 bytes).
+ *
+ * However, misconfiguration can lose data. "Set 16-bit memory address"
+ * to a part with 8-bit addressing will overwrite data. Writing with too
+ * big a page size also loses data. And it's not safe to assume that the
+ * conventional addresses 0x50..0x57 only hold eeproms; a PCF8563 RTC
+ * uses 0x51, for just one example.
+ *
+ * Accordingly, explicit board-specific configuration data should be used
+ * in almost all cases. (One partial exception is an SMBus used to access
+ * "SPD" data for DRAM sticks. Those only use 24c02 EEPROMs.)
+ *
+ * So this driver uses "new style" I2C driver binding, expecting to be
+ * told what devices exist. That may be in arch/X/mach-Y/board-Z.c or
+ * similar kernel-resident tables; or, configuration data coming from
+ * a bootloader.
+ *
+ * Other than binding model, current differences from "eeprom" driver are
+ * that this one handles write access and isn't restricted to 24c02 devices.
+ * It also handles larger devices (32 kbit and up) with two-byte addresses,
+ * which won't work on pure SMBus systems.
+ */
+
+struct at24_data {
+        struct at24_platform_data chip;
+        bool use_smbus;
+
+        /*
+         * Lock protects against activities from other Linux tasks,
+         * but not from changes by other I2C masters.
+         */
+        struct mutex lock;
+        struct bin_attribute bin;
+
+        u8 *writebuf;
+        unsigned write_max;
+        unsigned num_addresses;
+
+        /*
+         * Some chips tie up multiple I2C addresses; dummy devices reserve
+         * them for us, and we'll use them with SMBus calls.
+         */
+        struct i2c_client *client[];
+};
+
+/*
+ * This parameter is to help this driver avoid blocking other drivers out
+ * of I2C for potentially troublesome amounts of time. With a 100 kHz I2C
+ * clock, one 256 byte read takes about 1/43 second which is excessive;
+ * but the 1/170 second it takes at 400 kHz may be quite reasonable; and
+ * at 1 MHz (Fm+) a 1/430 second delay could easily be invisible.
+ *
+ * This value is forced to be a power of two so that writes align on pages.
+ */
+static unsigned io_limit = 128;
+module_param(io_limit, uint, 0);
+MODULE_PARM_DESC(io_limit, "Maximum bytes per I/O (default 128)");
+
+/*
+ * Specs often allow 5 msec for a page write, sometimes 20 msec;
+ * it's important to recover from write timeouts.
+ */
+static unsigned write_timeout = 25;
+module_param(write_timeout, uint, 0);
+MODULE_PARM_DESC(write_timeout, "Time (in ms) to try writes (default 25)");
+
+#define AT24_SIZE_BYTELEN 5
+#define AT24_SIZE_FLAGS 8
+
+#define AT24_BITMASK(x) (BIT(x) - 1)
+
+/* create non-zero magic value for given eeprom parameters */
+#define AT24_DEVICE_MAGIC(_len, _flags)                 \
+        ((1 << AT24_SIZE_FLAGS | (_flags))              \
+            << AT24_SIZE_BYTELEN | ilog2(_len))
+
+static const struct i2c_device_id at24_ids[] = {
+        /* needs 8 addresses as A0-A2 are ignored */
+        { "24c00", AT24_DEVICE_MAGIC(128 / 8, AT24_FLAG_TAKE8ADDR) },
+        /* old variants can't be handled with this generic entry! */
+        { "24c01", AT24_DEVICE_MAGIC(1024 / 8, 0) },
+        { "24c02", AT24_DEVICE_MAGIC(2048 / 8, 0) },
+        /* spd is a 24c02 in memory DIMMs */
+        { "spd", AT24_DEVICE_MAGIC(2048 / 8,
+                AT24_FLAG_READONLY | AT24_FLAG_IRUGO) },
+        { "24c04", AT24_DEVICE_MAGIC(4096 / 8, 0) },
+        /* 24rf08 quirk is handled at i2c-core */
+        { "24c08", AT24_DEVICE_MAGIC(8192 / 8, 0) },
+        { "24c16", AT24_DEVICE_MAGIC(16384 / 8, 0) },
+        { "24c32", AT24_DEVICE_MAGIC(32768 / 8, AT24_FLAG_ADDR16) },
+        { "24c64", AT24_DEVICE_MAGIC(65536 / 8, AT24_FLAG_ADDR16) },
+        { "24c128", AT24_DEVICE_MAGIC(131072 / 8, AT24_FLAG_ADDR16) },
+        { "24c256", AT24_DEVICE_MAGIC(262144 / 8, AT24_FLAG_ADDR16) },
+        { "24c512", AT24_DEVICE_MAGIC(524288 / 8, AT24_FLAG_ADDR16) },
+        { "24c1024", AT24_DEVICE_MAGIC(1048576 / 8, AT24_FLAG_ADDR16) },
+        { "at24", 0 },
+        { /* END OF LIST */ }
+};
+MODULE_DEVICE_TABLE(i2c, at24_ids);
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * This routine supports chips which consume multiple I2C addresses. It
+ * computes the addressing information to be used for a given r/w request.
+ * Assumes that sanity checks for offset happened at sysfs-layer.
+ */
+static struct i2c_client *at24_translate_offset(struct at24_data *at24,
+                unsigned *offset)
+{
+        unsigned i;
+
+        if (at24->chip.flags & AT24_FLAG_ADDR16) {
+                i = *offset >> 16;
+                *offset &= 0xffff;
+        } else {
+                i = *offset >> 8;
+                *offset &= 0xff;
+        }
+
+        return at24->client[i];
+}
+
+static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
+                unsigned offset, size_t count)
+{
+        struct i2c_msg msg[2];
+        u8 msgbuf[2];
+        struct i2c_client *client;
+        int status, i;
+
+        memset(msg, 0, sizeof(msg));
+
+        /*
+         * REVISIT some multi-address chips don't rollover page reads to
+         * the next slave address, so we may need to truncate the count.
+         * Those chips might need another quirk flag.
+         *
+         * If the real hardware used four adjacent 24c02 chips and that
+         * were misconfigured as one 24c08, that would be a similar effect:
+         * one "eeprom" file not four, but larger reads would fail when
+         * they crossed certain pages.
+         */
+
+        /*
+         * Slave address and byte offset derive from the offset. Always
+         * set the byte address; on a multi-master board, another master
+         * may have changed the chip's "current" address pointer.
+         */
+        client = at24_translate_offset(at24, &offset);
+
+        if (count > io_limit)
+                count = io_limit;
+
+        /* Smaller eeproms can work given some SMBus extension calls */
+        if (at24->use_smbus) {
+                if (count > I2C_SMBUS_BLOCK_MAX)
+                        count = I2C_SMBUS_BLOCK_MAX;
+                status = i2c_smbus_read_i2c_block_data(client, offset,
+                                count, buf);
+                dev_dbg(&client->dev, "smbus read %zu@%d --> %d\n",
+                                count, offset, status);
+                return (status < 0) ? -EIO : status;
+        }
+
+        /*
+         * When we have a better choice than SMBus calls, use a combined
+         * I2C message. Write address; then read up to io_limit data bytes.
+         * Note that read page rollover helps us here (unlike writes).
+         * msgbuf is u8 and will cast to our needs.
+         */
+        i = 0;
+        if (at24->chip.flags & AT24_FLAG_ADDR16)
+                msgbuf[i++] = offset >> 8;
+        msgbuf[i++] = offset;
+
+        msg[0].addr = client->addr;
+        msg[0].buf = msgbuf;
+        msg[0].len = i;
+
+        msg[1].addr = client->addr;
+        msg[1].flags = I2C_M_RD;
+        msg[1].buf = buf;
+        msg[1].len = count;
+
+        status = i2c_transfer(client->adapter, msg, 2);
+        dev_dbg(&client->dev, "i2c read %zu@%d --> %d\n",
+                        count, offset, status);
+
+        if (status == 2)
+                return count;
+        else if (status >= 0)
+                return -EIO;
+        else
+                return status;
+}
+
+static ssize_t at24_bin_read(struct kobject *kobj, struct bin_attribute *attr,
+                char *buf, loff_t off, size_t count)
+{
+        struct at24_data *at24;
+        ssize_t retval = 0;
+
+        at24 = dev_get_drvdata(container_of(kobj, struct device, kobj));
+
+        if (unlikely(!count))
+                return count;
+
+        /*
+         * Read data from chip, protecting against concurrent updates
+         * from this host, but not from other I2C masters.
+         */
+        mutex_lock(&at24->lock);
+
+        while (count) {
+                ssize_t status;
+
+                status = at24_eeprom_read(at24, buf, off, count);
+                if (status <= 0) {
+                        if (retval == 0)
+                                retval = status;
+                        break;
+                }
+                buf += status;
+                off += status;
+                count -= status;
+                retval += status;
+        }
+
+        mutex_unlock(&at24->lock);
+
+        return retval;
+}
+
+
+/*
+ * REVISIT: export at24_bin{read,write}() to let other kernel code use
+ * eeprom data. For example, it might hold a board's Ethernet address, or
+ * board-specific calibration data generated on the manufacturing floor.
+ */
+
+
+/*
+ * Note that if the hardware write-protect pin is pulled high, the whole
+ * chip is normally write protected. But there are plenty of product
+ * variants here, including OTP fuses and partial chip protect.
+ *
+ * We only use page mode writes; the alternative is sloooow. This routine
+ * writes at most one page.
+ */
+static ssize_t at24_eeprom_write(struct at24_data *at24, char *buf,
+                unsigned offset, size_t count)
+{
+        struct i2c_client *client;
+        struct i2c_msg msg;
+        ssize_t status;
+        unsigned long timeout, write_time;
+        unsigned next_page;
+
+        /* Get corresponding I2C address and adjust offset */
+        client = at24_translate_offset(at24, &offset);
+
+        /* write_max is at most a page */
+        if (count > at24->write_max)
+                count = at24->write_max;
+
+        /* Never roll over backwards, to the start of this page */
+        next_page = roundup(offset + 1, at24->chip.page_size);
+        if (offset + count > next_page)
+                count = next_page - offset;
+
+        /* If we'll use I2C calls for I/O, set up the message */
+        if (!at24->use_smbus) {
+                int i = 0;
+
+                msg.addr = client->addr;
+                msg.flags = 0;
+
+                /* msg.buf is u8 and casts will mask the values */
+                msg.buf = at24->writebuf;
+                if (at24->chip.flags & AT24_FLAG_ADDR16)
+                        msg.buf[i++] = offset >> 8;
+
+                msg.buf[i++] = offset;
+                memcpy(&msg.buf[i], buf, count);
+                msg.len = i + count;
+        }
+
+        /*
+         * Writes fail if the previous one didn't complete yet. We may
+         * loop a few times until this one succeeds, waiting at least
+         * long enough for one entire page write to work.
+         */
+        timeout = jiffies + msecs_to_jiffies(write_timeout);
+        do {
+                write_time = jiffies;
+                if (at24->use_smbus) {
+                        status = i2c_smbus_write_i2c_block_data(client,
+                                        offset, count, buf);
+                        if (status == 0)
+                                status = count;
+                } else {
+                        status = i2c_transfer(client->adapter, &msg, 1);
+                        if (status == 1)
+                                status = count;
+                }
+                dev_dbg(&client->dev, "write %zu@%d --> %zd (%ld)\n",
+                                count, offset, status, jiffies);
+
+                if (status == count)
+                        return count;
+
+                /* REVISIT: at HZ=100, this is sloooow */
+                msleep(1);
+        } while (time_before(write_time, timeout));
+
+        return -ETIMEDOUT;
+}
+
+static ssize_t at24_bin_write(struct kobject *kobj, struct bin_attribute *attr,
+                char *buf, loff_t off, size_t count)
+{
+        struct at24_data *at24;
+        ssize_t retval = 0;
+
+        at24 = dev_get_drvdata(container_of(kobj, struct device, kobj));
+
+        if (unlikely(!count))
+                return count;
+
+        /*
+         * Write data to chip, protecting against concurrent updates
+         * from this host, but not from other I2C masters.
+         */
+        mutex_lock(&at24->lock);
+
+        while (count) {
+                ssize_t status;
+
+                status = at24_eeprom_write(at24, buf, off, count);
+                if (status <= 0) {
+                        if (retval == 0)
+                                retval = status;
+                        break;
+                }
+                buf += status;
+                off += status;
+                count -= status;
+                retval += status;
+        }
+
+        mutex_unlock(&at24->lock);
+
+        return retval;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+        struct at24_platform_data chip;
+        bool writable;
+        bool use_smbus = false;
+        struct at24_data *at24;
+        int err;
+        unsigned i, num_addresses;
+        kernel_ulong_t magic;
+
+        if (client->dev.platform_data) {
+                chip = *(struct at24_platform_data *)client->dev.platform_data;
+        } else {
+                if (!id->driver_data) {
+                        err = -ENODEV;
+                        goto err_out;
+                }
+                magic = id->driver_data;
+                chip.byte_len = BIT(magic & AT24_BITMASK(AT24_SIZE_BYTELEN));
+                magic >>= AT24_SIZE_BYTELEN;
+                chip.flags = magic & AT24_BITMASK(AT24_SIZE_FLAGS);
+                /*
+                 * This is slow, but we can't know all eeproms, so we better
+                 * play safe. Specifying custom eeprom-types via platform_data
+                 * is recommended anyhow.
+                 */
+                chip.page_size = 1;
+        }
+
+        if (!is_power_of_2(chip.byte_len))
+                dev_warn(&client->dev,
+                        "byte_len looks suspicious (no power of 2)!\n");
+        if (!is_power_of_2(chip.page_size))
+                dev_warn(&client->dev,
+                        "page_size looks suspicious (no power of 2)!\n");
+
+        /* Use I2C operations unless we're stuck with SMBus extensions. */
+        if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+                if (chip.flags & AT24_FLAG_ADDR16) {
+                        err = -EPFNOSUPPORT;
+                        goto err_out;
+                }
+                if (!i2c_check_functionality(client->adapter,
+                                I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
+                        err = -EPFNOSUPPORT;
+                        goto err_out;
+                }
+                use_smbus = true;
+        }
+
+        if (chip.flags & AT24_FLAG_TAKE8ADDR)
+                num_addresses = 8;
+        else
+                num_addresses = DIV_ROUND_UP(chip.byte_len,
+                        (chip.flags & AT24_FLAG_ADDR16) ? 65536 : 256);
+
+        at24 = kzalloc(sizeof(struct at24_data) +
+                num_addresses * sizeof(struct i2c_client *), GFP_KERNEL);
+        if (!at24) {
+                err = -ENOMEM;
+                goto err_out;
+        }
+
+        mutex_init(&at24->lock);
+        at24->use_smbus = use_smbus;
+        at24->chip = chip;
+        at24->num_addresses = num_addresses;
+
+        /*
+         * Export the EEPROM bytes through sysfs, since that's convenient.
+         * By default, only root should see the data (maybe passwords etc)
+         */
+        at24->bin.attr.name = "eeprom";
+        at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR;
+        at24->bin.read = at24_bin_read;
+        at24->bin.size = chip.byte_len;
+
+        writable = !(chip.flags & AT24_FLAG_READONLY);
+        if (writable) {
+                if (!use_smbus || i2c_check_functionality(client->adapter,
+                                I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) {
+
+                        unsigned write_max = chip.page_size;
+
+                        at24->bin.write = at24_bin_write;
+                        at24->bin.attr.mode |= S_IWUSR;
+
+                        if (write_max > io_limit)
+                                write_max = io_limit;
+                        if (use_smbus && write_max > I2C_SMBUS_BLOCK_MAX)
+                                write_max = I2C_SMBUS_BLOCK_MAX;
+                        at24->write_max = write_max;
+
+                        /* buffer (data + address at the beginning) */
+                        at24->writebuf = kmalloc(write_max + 2, GFP_KERNEL);
+                        if (!at24->writebuf) {
+                                err = -ENOMEM;
+                                goto err_struct;
+                        }
+                } else {
+                        dev_warn(&client->dev,
+                                "cannot write due to controller restrictions.");
+                }
+        }
+
+        at24->client[0] = client;
+
+        /* use dummy devices for multiple-address chips */
+        for (i = 1; i < num_addresses; i++) {
+                at24->client[i] = i2c_new_dummy(client->adapter,
+                                        client->addr + i);
+                if (!at24->client[i]) {
+                        dev_err(&client->dev, "address 0x%02x unavailable\n",
+                                        client->addr + i);
+                        err = -EADDRINUSE;
+                        goto err_clients;
+                }
+        }
+
+        err = sysfs_create_bin_file(&client->dev.kobj, &at24->bin);
+        if (err)
+                goto err_clients;
+
+        i2c_set_clientdata(client, at24);
+
+        dev_info(&client->dev, "%zu byte %s EEPROM %s\n",
+                at24->bin.size, client->name,
+                writable ? "(writable)" : "(read-only)");
+        dev_dbg(&client->dev,
+                "page_size %d, num_addresses %d, write_max %d%s\n",
+                chip.page_size, num_addresses,
+                at24->write_max,
+                use_smbus ? ", use_smbus" : "");
+
+        return 0;
+
+err_clients:
+        for (i = 1; i < num_addresses; i++)
+                if (at24->client[i])
+                        i2c_unregister_device(at24->client[i]);
+
+        kfree(at24->writebuf);
+err_struct:
+        kfree(at24);
+err_out:
+        dev_dbg(&client->dev, "probe error %d\n", err);
+        return err;
+}
+
+static int __devexit at24_remove(struct i2c_client *client)
+{
+        struct at24_data *at24;
+        int i;
+
+        at24 = i2c_get_clientdata(client);
+        sysfs_remove_bin_file(&client->dev.kobj, &at24->bin);
+
+        for (i = 1; i < at24->num_addresses; i++)
+                i2c_unregister_device(at24->client[i]);
+
+        kfree(at24->writebuf);
+        kfree(at24);
+        i2c_set_clientdata(client, NULL);
+        return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct i2c_driver at24_driver = {
+        .driver = {
+                .name = "at24",
+                .owner = THIS_MODULE,
+        },
+        .probe = at24_probe,
+        .remove = __devexit_p(at24_remove),
+        .id_table = at24_ids,
+};
+
+static int __init at24_init(void)
+{
+        io_limit = rounddown_pow_of_two(io_limit);
+        return i2c_add_driver(&at24_driver);
+}
+module_init(at24_init);
+
+static void __exit at24_exit(void)
+{
+        i2c_del_driver(&at24_driver);
+}
+module_exit(at24_exit);
+
+MODULE_DESCRIPTION("Driver for most I2C EEPROMs");
+MODULE_AUTHOR("David Brownell and Wolfram Sang");
+MODULE_LICENSE("GPL");