mfd: Initial support for twl5031

TWL5031 introduces two new interrupts in PIH. Moreover, BCI
has changed remarkably and, thus, it's disabled when TWL5031
is in use.

Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

2 files changed, 139 insertions, 5 deletions

diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index 90a38e43c313..334c86fccede 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -158,6 +158,10 @@
 #define TWL4030_BASEADD_PWMB            0x00F1
 #define TWL4030_BASEADD_KEYPAD          0x00D2
 
+#define TWL5031_BASEADD_ACCESSORY       0x0074 /* Replaces Main Charge */
+#define TWL5031_BASEADD_INTERRUPTS      0x00B9 /* Different than TWL4030's
+                                                  one */
+
 /* subchip/slave 3 - POWER ID */
 #define TWL4030_BASEADD_BACKUP          0x0014
 #define TWL4030_BASEADD_INT             0x002E
@@ -189,6 +193,7 @@
 /* chip-specific feature flags, for i2c_device_id.driver_data */
 #define TWL4030_VAUX2           BIT(0)  /* pre-5030 voltage ranges */
 #define TPS_SUBSET              BIT(1)  /* tps659[23]0 have fewer LDOs */
+#define TWL5031                 BIT(2)  /* twl5031 has different registers */
 
 /*----------------------------------------------------------------------*/
 
@@ -241,6 +246,8 @@ static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = {
         { 2, TWL4030_BASEADD_PWM1 },
         { 2, TWL4030_BASEADD_PWMA },
         { 2, TWL4030_BASEADD_PWMB },
+        { 2, TWL5031_BASEADD_ACCESSORY },
+        { 2, TWL5031_BASEADD_INTERRUPTS },
 
         { 3, TWL4030_BASEADD_BACKUP },
         { 3, TWL4030_BASEADD_INT },
@@ -488,7 +495,8 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 {
         struct device   *child;
 
-        if (twl_has_bci() && pdata->bci && !(features & TPS_SUBSET)) {
+        if (twl_has_bci() && pdata->bci &&
+            !(features & (TPS_SUBSET | TWL5031))) {
                 child = add_child(3, "twl4030_bci",
                                 pdata->bci, sizeof(*pdata->bci),
                                 false,
@@ -760,6 +768,7 @@ static void clocks_init(struct device *dev,
 
 int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end);
 int twl_exit_irq(void);
+int twl_init_chip_irq(const char *chip);
 
 static int twl4030_remove(struct i2c_client *client)
 {
@@ -835,6 +844,7 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
         if (client->irq
                         && pdata->irq_base
                         && pdata->irq_end > pdata->irq_base) {
+                twl_init_chip_irq(id->name);
                 status = twl_init_irq(client->irq, pdata->irq_base, pdata->irq_end);
                 if (status < 0)
                         goto fail;
@@ -850,6 +860,7 @@ fail:
 static const struct i2c_device_id twl4030_ids[] = {
         { "twl4030", TWL4030_VAUX2 },   /* "Triton 2" */
         { "twl5030", 0 },               /* T2 updated */
+        { "twl5031", TWL5031 },         /* TWL5030 updated */
         { "tps65950", 0 },              /* catalog version of twl5030 */
         { "tps65930", TPS_SUBSET },     /* fewer LDOs and DACs; no charger */
         { "tps65920", TPS_SUBSET },     /* fewer LDOs; no codec or charger */
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index fb194fe244c1..0b733028828f 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -74,6 +74,8 @@ struct sih {
         u8      edr_offset;
         u8      bytes_edr;              /* bytelen of EDR */
 
+        u8      irq_lines;              /* number of supported irq lines */
+
         /* SIR ignored -- set interrupt, for testing only */
         struct irq_data {
                 u8      isr_offset;
@@ -82,6 +84,9 @@ struct sih {
         /* + 2 bytes padding */
 };
 
+static const struct sih *sih_modules;
+static int nr_sih_modules;
+
 #define SIH_INITIALIZER(modname, nbits) \
         .module         = TWL4030_MODULE_ ## modname, \
         .control_offset = TWL4030_ ## modname ## _SIH_CTRL, \
@@ -89,6 +94,7 @@ struct sih {
         .bytes_ixr      = DIV_ROUND_UP(nbits, 8), \
         .edr_offset     = TWL4030_ ## modname ## _EDR, \
         .bytes_edr      = DIV_ROUND_UP((2*(nbits)), 8), \
+        .irq_lines      = 2, \
         .mask = { { \
                 .isr_offset     = TWL4030_ ## modname ## _ISR1, \
                 .imr_offset     = TWL4030_ ## modname ## _IMR1, \
@@ -107,7 +113,8 @@ struct sih {
 /* Order in this table matches order in PIH_ISR.  That is,
  * BIT(n) in PIH_ISR is sih_modules[n].
  */
-static const struct sih sih_modules[6] = {
+/* sih_modules_twl4030 is used both in twl4030 and twl5030 */
+static const struct sih sih_modules_twl4030[6] = {
         [0] = {
                 .name           = "gpio",
                 .module         = TWL4030_MODULE_GPIO,
@@ -118,6 +125,7 @@ static const struct sih sih_modules[6] = {
                 /* Note: *all* of these IRQs default to no-trigger */
                 .edr_offset     = REG_GPIO_EDR1,
                 .bytes_edr      = 5,
+                .irq_lines      = 2,
                 .mask = { {
                         .isr_offset     = REG_GPIO_ISR1A,
                         .imr_offset     = REG_GPIO_IMR1A,
@@ -140,6 +148,7 @@ static const struct sih sih_modules[6] = {
                 .edr_offset     = TWL4030_INTERRUPTS_BCIEDR1,
                 /* Note: most of these IRQs default to no-trigger */
                 .bytes_edr      = 3,
+                .irq_lines      = 2,
                 .mask = { {
                         .isr_offset     = TWL4030_INTERRUPTS_BCIISR1A,
                         .imr_offset     = TWL4030_INTERRUPTS_BCIIMR1A,
@@ -164,6 +173,99 @@ static const struct sih sih_modules[6] = {
                 /* there are no SIH modules #6 or #7 ... */
 };
 
+static const struct sih sih_modules_twl5031[8] = {
+        [0] = {
+                .name           = "gpio",
+                .module         = TWL4030_MODULE_GPIO,
+                .control_offset = REG_GPIO_SIH_CTRL,
+                .set_cor        = true,
+                .bits           = TWL4030_GPIO_MAX,
+                .bytes_ixr      = 3,
+                /* Note: *all* of these IRQs default to no-trigger */
+                .edr_offset     = REG_GPIO_EDR1,
+                .bytes_edr      = 5,
+                .irq_lines      = 2,
+                .mask = { {
+                        .isr_offset     = REG_GPIO_ISR1A,
+                        .imr_offset     = REG_GPIO_IMR1A,
+                }, {
+                        .isr_offset     = REG_GPIO_ISR1B,
+                        .imr_offset     = REG_GPIO_IMR1B,
+                }, },
+        },
+        [1] = {
+                .name           = "keypad",
+                .set_cor        = true,
+                SIH_INITIALIZER(KEYPAD_KEYP, 4)
+        },
+        [2] = {
+                .name           = "bci",
+                .module         = TWL5031_MODULE_INTERRUPTS,
+                .control_offset = TWL5031_INTERRUPTS_BCISIHCTRL,
+                .bits           = 7,
+                .bytes_ixr      = 1,
+                .edr_offset     = TWL5031_INTERRUPTS_BCIEDR1,
+                /* Note: most of these IRQs default to no-trigger */
+                .bytes_edr      = 2,
+                .irq_lines      = 2,
+                .mask = { {
+                        .isr_offset     = TWL5031_INTERRUPTS_BCIISR1,
+                        .imr_offset     = TWL5031_INTERRUPTS_BCIIMR1,
+                }, {
+                        .isr_offset     = TWL5031_INTERRUPTS_BCIISR2,
+                        .imr_offset     = TWL5031_INTERRUPTS_BCIIMR2,
+                }, },
+        },
+        [3] = {
+                .name           = "madc",
+                SIH_INITIALIZER(MADC, 4)
+        },
+        [4] = {
+                /* USB doesn't use the same SIH organization */
+                .name           = "usb",
+        },
+        [5] = {
+                .name           = "power",
+                .set_cor        = true,
+                SIH_INITIALIZER(INT_PWR, 8)
+        },
+        [6] = {
+                /*
+                 * ACI doesn't use the same SIH organization.
+                 * For example, it supports only one interrupt line
+                 */
+                .name           = "aci",
+                .module         = TWL5031_MODULE_ACCESSORY,
+                .bits           = 9,
+                .bytes_ixr      = 2,
+                .irq_lines      = 1,
+                .mask = { {
+                        .isr_offset     = TWL5031_ACIIDR_LSB,
+                        .imr_offset     = TWL5031_ACIIMR_LSB,
+                }, },
+
+        },
+        [7] = {
+                /* Accessory */
+                .name           = "acc",
+                .module         = TWL5031_MODULE_ACCESSORY,
+                .control_offset = TWL5031_ACCSIHCTRL,
+                .bits           = 2,
+                .bytes_ixr      = 1,
+                .edr_offset     = TWL5031_ACCEDR1,
+                /* Note: most of these IRQs default to no-trigger */
+                .bytes_edr      = 1,
+                .irq_lines      = 2,
+                .mask = { {
+                        .isr_offset     = TWL5031_ACCISR1,
+                        .imr_offset     = TWL5031_ACCIMR1,
+                }, {
+                        .isr_offset     = TWL5031_ACCISR2,
+                        .imr_offset     = TWL5031_ACCIMR2,
+                }, },
+        },
+};
+
 #undef TWL4030_MODULE_KEYPAD_KEYP
 #undef TWL4030_MODULE_INT_PWR
 #undef TWL4030_INT_PWR_EDR
@@ -284,12 +386,16 @@ static int twl4030_init_sih_modules(unsigned line)
         /* disable all interrupts on our line */
         memset(buf, 0xff, sizeof buf);
         sih = sih_modules;
-        for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) {
+        for (i = 0; i < nr_sih_modules; i++, sih++) {
 
                 /* skip USB -- it's funky */
                 if (!sih->bytes_ixr)
                         continue;
 
+                /* Not all the SIH modules support multiple interrupt lines */
+                if (sih->irq_lines <= line)
+                        continue;
+
                 status = twl4030_i2c_write(sih->module, buf,
                                 sih->mask[line].imr_offset, sih->bytes_ixr);
                 if (status < 0)
@@ -314,7 +420,7 @@ static int twl4030_init_sih_modules(unsigned line)
         }
 
         sih = sih_modules;
-        for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) {
+        for (i = 0; i < nr_sih_modules; i++, sih++) {
                 u8 rxbuf[4];
                 int j;
 
@@ -322,6 +428,10 @@ static int twl4030_init_sih_modules(unsigned line)
                 if (!sih->bytes_ixr)
                         continue;
 
+                /* Not all the SIH modules support multiple interrupt lines */
+                if (sih->irq_lines <= line)
+                        continue;
+
                 /* Clear pending interrupt status.  Either the read was
                  * enough, or we need to write those bits.  Repeat, in
                  * case an IRQ is pending (PENDDIS=0) ... that's not
@@ -611,7 +721,7 @@ int twl4030_sih_setup(int module)
 
         /* only support modules with standard clear-on-read for now */
         for (sih_mod = 0, sih = sih_modules;
-                        sih_mod < ARRAY_SIZE(sih_modules);
+                        sih_mod < nr_sih_modules;
                         sih_mod++, sih++) {
                 if (sih->module == module && sih->set_cor) {
                         if (!WARN((irq_base + sih->bits) > NR_IRQS,
@@ -756,3 +866,16 @@ int twl_exit_irq(void)
         }
         return 0;
 }
+
+int twl_init_chip_irq(const char *chip)
+{
+        if (!strcmp(chip, "twl5031")) {
+                sih_modules = sih_modules_twl5031;
+                nr_sih_modules = ARRAY_SIZE(sih_modules_twl5031);
+        } else {
+                sih_modules = sih_modules_twl4030;
+                nr_sih_modules = ARRAY_SIZE(sih_modules_twl4030);
+        }
+
+        return 0;
+}