mfd: Correct ro and cd implemantion on DM355

This patch corrects the support for MMCSD card detection
and read only feature for SoC DM355.

EVMDM355_ECP_VA4.pdf, from Spectrum digital, suggests that
Bit 2 and 4 should be checked for card detection. However
on the EVM, bits 1 and 3 gives this status, for MMC/SD
instance 0 and 1 respectively. The pdf also suggests that
Bit 1 and 3 should be checked for write protection. However
on the EVM bits 2 and 4 gives this status.

This document can be downloaded from
http://c6000.spectrumdigital.com/evmdm355/reve/files/EVMDM355_ECP_VA4.pdf

Signed-off-by: Vipin Bhandari <vipin.bhandari@ti.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

1 files changed, 10 insertions, 2 deletions

diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c
index 5b6e58a3ba46..3d4a861976ca 100644
--- a/drivers/mfd/dm355evm_msp.c
+++ b/drivers/mfd/dm355evm_msp.c
@@ -107,8 +107,16 @@ static const u8 msp_gpios[] = {
         MSP_GPIO(2, SWITCH1), MSP_GPIO(3, SWITCH1),
         MSP_GPIO(4, SWITCH1),
         /* switches on MMC/SD sockets */
-        MSP_GPIO(1, SDMMC), MSP_GPIO(2, SDMMC), /* mmc0 WP, nCD */
-        MSP_GPIO(3, SDMMC), MSP_GPIO(4, SDMMC), /* mmc1 WP, nCD */
+        /*
+         * Note: EVMDM355_ECP_VA4.pdf suggests that Bit 2 and 4 should be
+         * checked for card detection. However on the EVM bit 1 and 3 gives
+         * this status, for 0 and 1 instance respectively. The pdf also
+         * suggests that Bit 1 and 3 should be checked for write protection.
+         * However on the EVM bit 2 and 4 gives this status,for 0 and 1
+         * instance respectively.
+         */
+        MSP_GPIO(2, SDMMC), MSP_GPIO(1, SDMMC), /* mmc0 WP, nCD */
+        MSP_GPIO(4, SDMMC), MSP_GPIO(3, SDMMC), /* mmc1 WP, nCD */
 };
 
 #define MSP_GPIO_REG(offset)    (msp_gpios[(offset)] >> 3)