[MFD] Add SA11x0 MCP platform device support

Add platform device data for the SA11x0 MCP device.  This allows
platforms to customise the configuration of the SA11x0 MCP device
according to their needs.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 10 insertions, 10 deletions

diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c
index 25699fa37fef..e9806fbbe696 100644
--- a/drivers/mfd/mcp-sa11x0.c
+++ b/drivers/mfd/mcp-sa11x0.c
@@ -24,6 +24,7 @@
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/system.h>
+#include <asm/arch/mcp.h>
 
 #include <asm/arch/assabet.h>
 
@@ -140,16 +141,11 @@ static struct mcp_ops mcp_sa11x0 = {
 static int mcp_sa11x0_probe(struct device *dev)
 {
         struct platform_device *pdev = to_platform_device(dev);
+        struct mcp_plat_data *data = pdev->dev.platform_data;
         struct mcp *mcp;
         int ret;
 
-        if (!machine_is_adsbitsy()       && !machine_is_assabet()        &&
-            !machine_is_cerf()           && !machine_is_flexanet()       &&
-            !machine_is_freebird()       && !machine_is_graphicsclient() &&
-            !machine_is_graphicsmaster() && !machine_is_lart()           &&
-            !machine_is_omnimeter()      && !machine_is_pfs168()         &&
-            !machine_is_shannon()        && !machine_is_simpad()         &&
-            !machine_is_yopy())
+        if (!data)
                 return -ENODEV;
 
         if (!request_mem_region(0x80060000, 0x60, "sa11x0-mcp"))
@@ -163,7 +159,7 @@ static int mcp_sa11x0_probe(struct device *dev)
 
         mcp->owner              = THIS_MODULE;
         mcp->ops                = &mcp_sa11x0;
-        mcp->sclk_rate          = 11981000,
+        mcp->sclk_rate          = data->sclk_rate;
         mcp->dma_audio_rd       = DMA_Ser4MCP0Rd;
         mcp->dma_audio_wr       = DMA_Ser4MCP0Wr;
         mcp->dma_telco_rd       = DMA_Ser4MCP1Rd;
@@ -184,9 +180,13 @@ static int mcp_sa11x0_probe(struct device *dev)
         PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
         PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
 
+        /*
+         * Initialise device.  Note that we initially
+         * set the sampling rate to minimum.
+         */
         Ser4MCSR = -1;
-        Ser4MCCR1 = 0;
-        Ser4MCCR0 = 0x00007f7f | MCCR0_ADM;
+        Ser4MCCR1 = data->mccr1;
+        Ser4MCCR0 = data->mccr0 | 0x7f7f;
 
         /*
          * Calculate the read/write timeout (us) from the bit clock