mfd: Refactor DB8500 PRCMU reg access

Instead of carrying around the __PRCMU_BASE in every read or
write to the PRCMU registers, move it out to the register
definition file and define registers along with their base
offset so that the code gets easier to read.

Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

1 files changed, 152 insertions, 114 deletions

diff --git a/drivers/mfd/db8500-prcmu-regs.h b/drivers/mfd/db8500-prcmu-regs.h
index 3bbf04d58043..ec22e9f15d32 100644
--- a/drivers/mfd/db8500-prcmu-regs.h
+++ b/drivers/mfd/db8500-prcmu-regs.h
@@ -9,99 +9,170 @@
  *
  * PRCM Unit registers
  */
+
 #ifndef __DB8500_PRCMU_REGS_H
 #define __DB8500_PRCMU_REGS_H
 
-#include <linux/bitops.h>
 #include <mach/hardware.h>
 
 #define BITS(_start, _end) ((BIT(_end) - BIT(_start)) + BIT(_end))
 
-#define PRCM_ARM_PLLDIVPS 0x118
-#define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE  BITS(0, 5)
-#define PRCM_ARM_PLLDIVPS_MAX_MASK      0xF
-
-#define PRCM_PLLARM_LOCKP 0x0A8
-#define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3 BIT(1)
-
-#define PRCM_ARM_CHGCLKREQ 0x114
-#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ BIT(0)
-
-#define PRCM_PLLARM_ENABLE 0x98
-#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE   BIT(0)
-#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_COUNTON  BIT(8)
-
-#define PRCM_ARMCLKFIX_MGT      0x0
-#define PRCM_A9_RESETN_CLR      0x1f4
-#define PRCM_A9_RESETN_SET      0x1f0
-#define PRCM_ARM_LS_CLAMP       0x30C
-#define PRCM_SRAM_A9            0x308
+#define PRCM_SVACLK_MGT_OFF             0x008
+#define PRCM_SIACLK_MGT_OFF             0x00C
+#define PRCM_SGACLK_MGT_OFF             0x014
+#define PRCM_UARTCLK_MGT_OFF            0x018
+#define PRCM_MSP02CLK_MGT_OFF           0x01C
+#define PRCM_I2CCLK_MGT_OFF             0x020
+#define PRCM_SDMMCCLK_MGT_OFF           0x024
+#define PRCM_SLIMCLK_MGT_OFF            0x028
+#define PRCM_PER1CLK_MGT_OFF            0x02C
+#define PRCM_PER2CLK_MGT_OFF            0x030
+#define PRCM_PER3CLK_MGT_OFF            0x034
+#define PRCM_PER5CLK_MGT_OFF            0x038
+#define PRCM_PER6CLK_MGT_OFF            0x03C
+#define PRCM_PER7CLK_MGT_OFF            0x040
+#define PRCM_PWMCLK_MGT_OFF             0x044 /* for DB5500 */
+#define PRCM_IRDACLK_MGT_OFF            0x048 /* for DB5500 */
+#define PRCM_IRRCCLK_MGT_OFF            0x04C /* for DB5500 */
+#define PRCM_LCDCLK_MGT_OFF             0x044
+#define PRCM_BMLCLK_MGT_OFF             0x04C
+#define PRCM_HSITXCLK_MGT_OFF           0x050
+#define PRCM_HSIRXCLK_MGT_OFF           0x054
+#define PRCM_HDMICLK_MGT_OFF            0x058
+#define PRCM_APEATCLK_MGT_OFF           0x05C
+#define PRCM_APETRACECLK_MGT_OFF        0x060
+#define PRCM_MCDECLK_MGT_OFF            0x064
+#define PRCM_IPI2CCLK_MGT_OFF           0x068
+#define PRCM_DSIALTCLK_MGT_OFF          0x06C
+#define PRCM_DMACLK_MGT_OFF             0x074
+#define PRCM_B2R2CLK_MGT_OFF            0x078
+#define PRCM_TVCLK_MGT_OFF              0x07C
+#define PRCM_UNIPROCLK_MGT_OFF          0x278
+#define PRCM_SSPCLK_MGT_OFF             0x280
+#define PRCM_RNGCLK_MGT_OFF             0x284
+#define PRCM_UICCCLK_MGT_OFF            0x27C
+#define PRCM_MSP1CLK_MGT_OFF            0x288
+
+#define PRCM_ARM_PLLDIVPS       (_PRCMU_BASE + 0x118)
+#define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE          0x3f
+#define PRCM_ARM_PLLDIVPS_MAX_MASK              0xf
+
+#define PRCM_PLLARM_LOCKP       (_PRCMU_BASE + 0x0a8)
+#define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3    0x2
+
+#define PRCM_ARM_CHGCLKREQ      (_PRCMU_BASE + 0x114)
+#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ   0x1
+
+#define PRCM_PLLARM_ENABLE      (_PRCMU_BASE + 0x98)
+#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE   0x1
+#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_COUNTON  0x100
+
+#define PRCM_ARMCLKFIX_MGT      (_PRCMU_BASE + 0x0)
+#define PRCM_A9PL_FORCE_CLKEN   (_PRCMU_BASE + 0x19C)
+#define PRCM_A9_RESETN_CLR      (_PRCMU_BASE + 0x1f4)
+#define PRCM_A9_RESETN_SET      (_PRCMU_BASE + 0x1f0)
+#define PRCM_ARM_LS_CLAMP       (_PRCMU_BASE + 0x30c)
+#define PRCM_SRAM_A9            (_PRCMU_BASE + 0x308)
+
+#define PRCM_A9PL_FORCE_CLKEN_PRCM_A9PL_FORCE_CLKEN BIT(0)
+#define PRCM_A9PL_FORCE_CLKEN_PRCM_A9AXI_FORCE_CLKEN BIT(1)
 
 /* ARM WFI Standby signal register */
-#define PRCM_ARM_WFI_STANDBY    0x130
-#define PRCM_IOCR               0x310
-#define PRCM_IOCR_IOFORCE BIT(0)
+#define PRCM_ARM_WFI_STANDBY    (_PRCMU_BASE + 0x130)
+#define PRCM_IOCR               (_PRCMU_BASE + 0x310)
+#define PRCM_IOCR_IOFORCE                       0x1
 
 /* CPU mailbox registers */
-#define PRCM_MBOX_CPU_VAL 0x0FC
-#define PRCM_MBOX_CPU_SET 0x100
+#define PRCM_MBOX_CPU_VAL       (_PRCMU_BASE + 0x0fc)
+#define PRCM_MBOX_CPU_SET       (_PRCMU_BASE + 0x100)
+#define PRCM_MBOX_CPU_CLR       (_PRCMU_BASE + 0x104)
 
 /* Dual A9 core interrupt management unit registers */
-#define PRCM_A9_MASK_REQ 0x328
-#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ BIT(0)
-
-#define PRCM_A9_MASK_ACK        0x32C
-#define PRCM_ARMITMSK31TO0      0x11C
-#define PRCM_ARMITMSK63TO32     0x120
-#define PRCM_ARMITMSK95TO64     0x124
-#define PRCM_ARMITMSK127TO96    0x128
-#define PRCM_POWER_STATE_VAL    0x25C
-#define PRCM_ARMITVAL31TO0      0x260
-#define PRCM_ARMITVAL63TO32     0x264
-#define PRCM_ARMITVAL95TO64     0x268
-#define PRCM_ARMITVAL127TO96    0x26C
-
-#define PRCM_HOSTACCESS_REQ 0x334
-#define PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ BIT(0)
-
-#define PRCM_ARM_IT1_CLR 0x48C
-#define PRCM_ARM_IT1_VAL 0x494
-
-#define PRCM_ITSTATUS0          0x148
-#define PRCM_ITSTATUS1          0x150
-#define PRCM_ITSTATUS2          0x158
-#define PRCM_ITSTATUS3          0x160
-#define PRCM_ITSTATUS4          0x168
-#define PRCM_ITSTATUS5          0x484
-#define PRCM_ITCLEAR5           0x488
-#define PRCM_ARMIT_MASKXP70_IT  0x1018
+#define PRCM_A9_MASK_REQ        (_PRCMU_BASE + 0x328)
+#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ       0x1
+
+#define PRCM_A9_MASK_ACK        (_PRCMU_BASE + 0x32c)
+#define PRCM_ARMITMSK31TO0      (_PRCMU_BASE + 0x11c)
+#define PRCM_ARMITMSK63TO32     (_PRCMU_BASE + 0x120)
+#define PRCM_ARMITMSK95TO64     (_PRCMU_BASE + 0x124)
+#define PRCM_ARMITMSK127TO96    (_PRCMU_BASE + 0x128)
+#define PRCM_POWER_STATE_VAL    (_PRCMU_BASE + 0x25C)
+#define PRCM_ARMITVAL31TO0      (_PRCMU_BASE + 0x260)
+#define PRCM_ARMITVAL63TO32     (_PRCMU_BASE + 0x264)
+#define PRCM_ARMITVAL95TO64     (_PRCMU_BASE + 0x268)
+#define PRCM_ARMITVAL127TO96    (_PRCMU_BASE + 0x26C)
+
+#define PRCM_HOSTACCESS_REQ     (_PRCMU_BASE + 0x334)
+#define PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ 0x1
+#define ARM_WAKEUP_MODEM        0x1
+
+#define PRCM_ARM_IT1_CLR        (_PRCMU_BASE + 0x48C)
+#define PRCM_ARM_IT1_VAL        (_PRCMU_BASE + 0x494)
+#define PRCM_HOLD_EVT           (_PRCMU_BASE + 0x174)
+
+#define PRCM_MOD_AWAKE_STATUS   (_PRCMU_BASE + 0x4A0)
+#define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_COREPD_AWAKE     BIT(0)
+#define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_AAPD_AWAKE       BIT(1)
+#define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_VMODEM_OFF_ISO   BIT(2)
+
+#define PRCM_ITSTATUS0          (_PRCMU_BASE + 0x148)
+#define PRCM_ITSTATUS1          (_PRCMU_BASE + 0x150)
+#define PRCM_ITSTATUS2          (_PRCMU_BASE + 0x158)
+#define PRCM_ITSTATUS3          (_PRCMU_BASE + 0x160)
+#define PRCM_ITSTATUS4          (_PRCMU_BASE + 0x168)
+#define PRCM_ITSTATUS5          (_PRCMU_BASE + 0x484)
+#define PRCM_ITCLEAR5           (_PRCMU_BASE + 0x488)
+#define PRCM_ARMIT_MASKXP70_IT  (_PRCMU_BASE + 0x1018)
 
 /* System reset register */
-#define PRCM_APE_SOFTRST 0x228
+#define PRCM_APE_SOFTRST        (_PRCMU_BASE + 0x228)
 
 /* Level shifter and clamp control registers */
-#define PRCM_MMIP_LS_CLAMP_SET 0x420
-#define PRCM_MMIP_LS_CLAMP_CLR 0x424
+#define PRCM_MMIP_LS_CLAMP_SET     (_PRCMU_BASE + 0x420)
+#define PRCM_MMIP_LS_CLAMP_CLR     (_PRCMU_BASE + 0x424)
+
+/* PRCMU clock/PLL/reset registers */
+#define PRCM_PLLDSI_FREQ           (_PRCMU_BASE + 0x500)
+#define PRCM_PLLDSI_ENABLE         (_PRCMU_BASE + 0x504)
+#define PRCM_PLLDSI_LOCKP          (_PRCMU_BASE + 0x508)
+#define PRCM_LCDCLK_MGT            (_PRCMU_BASE + PRCM_LCDCLK_MGT_OFF)
+#define PRCM_MCDECLK_MGT           (_PRCMU_BASE + PRCM_MCDECLK_MGT_OFF)
+#define PRCM_HDMICLK_MGT           (_PRCMU_BASE + PRCM_HDMICLK_MGT_OFF)
+#define PRCM_TVCLK_MGT             (_PRCMU_BASE + PRCM_TVCLK_MGT_OFF)
+#define PRCM_DSI_PLLOUT_SEL        (_PRCMU_BASE + 0x530)
+#define PRCM_DSITVCLK_DIV          (_PRCMU_BASE + 0x52C)
+#define PRCM_PLLDSI_LOCKP          (_PRCMU_BASE + 0x508)
+#define PRCM_APE_RESETN_SET        (_PRCMU_BASE + 0x1E4)
+#define PRCM_APE_RESETN_CLR        (_PRCMU_BASE + 0x1E8)
+
+#define PRCM_CLKOCR                (_PRCMU_BASE + 0x1CC)
+#define PRCM_CLKOCR_CLKOUT0_REF_CLK     (1 << 0)
+#define PRCM_CLKOCR_CLKOUT0_MASK        BITS(0, 13)
+#define PRCM_CLKOCR_CLKOUT1_REF_CLK     (1 << 16)
+#define PRCM_CLKOCR_CLKOUT1_MASK        BITS(16, 29)
+
+/* ePOD and memory power signal control registers */
+#define PRCM_EPOD_C_SET            (_PRCMU_BASE + 0x410)
+#define PRCM_SRAM_LS_SLEEP         (_PRCMU_BASE + 0x304)
+
+/* Debug power control unit registers */
+#define PRCM_POWER_STATE_SET       (_PRCMU_BASE + 0x254)
+
+/* Miscellaneous unit registers */
+#define PRCM_DSI_SW_RESET          (_PRCMU_BASE + 0x324)
+#define PRCM_GPIOCR                (_PRCMU_BASE + 0x138)
+#define PRCM_GPIOCR_DBG_STM_MOD_CMD1            0x800
+#define PRCM_GPIOCR_DBG_UARTMOD_CMD0            0x1
 
 /* PRCMU HW semaphore */
-#define PRCM_SEM 0x400
+#define PRCM_SEM                   (_PRCMU_BASE + 0x400)
 #define PRCM_SEM_PRCM_SEM BIT(0)
 
-/* PRCMU clock/PLL/reset registers */
-#define PRCM_PLLDSI_FREQ        0x500
-#define PRCM_PLLDSI_ENABLE      0x504
-#define PRCM_PLLDSI_LOCKP       0x508
-#define PRCM_DSI_PLLOUT_SEL     0x530
-#define PRCM_DSITVCLK_DIV       0x52C
-#define PRCM_APE_RESETN_SET     0x1E4
-#define PRCM_APE_RESETN_CLR     0x1E8
-
-#define PRCM_TCR                0x1C8
-#define PRCM_TCR_TENSEL_MASK    BITS(0, 7)
-#define PRCM_TCR_STOP_TIMERS    BIT(16)
-#define PRCM_TCR_DOZE_MODE      BIT(17)
-
-#define PRCM_CLKOCR                     0x1CC
+#define PRCM_TCR                   (_PRCMU_BASE + 0x1C8)
+#define PRCM_TCR_TENSEL_MASK       BITS(0, 7)
+#define PRCM_TCR_STOP_TIMERS       BIT(16)
+#define PRCM_TCR_DOZE_MODE         BIT(17)
+
 #define PRCM_CLKOCR_CLKODIV0_SHIFT      0
 #define PRCM_CLKOCR_CLKODIV0_MASK       BITS(0, 5)
 #define PRCM_CLKOCR_CLKOSEL0_SHIFT      6
@@ -112,55 +183,22 @@
 #define PRCM_CLKOCR_CLKOSEL1_MASK       BITS(22, 24)
 #define PRCM_CLKOCR_CLK1TYPE            BIT(28)
 
-#define PRCM_SGACLK_MGT         0x014
-#define PRCM_UARTCLK_MGT        0x018
-#define PRCM_MSP02CLK_MGT       0x01C
-#define PRCM_MSP1CLK_MGT        0x288
-#define PRCM_I2CCLK_MGT         0x020
-#define PRCM_SDMMCCLK_MGT       0x024
-#define PRCM_SLIMCLK_MGT        0x028
-#define PRCM_PER1CLK_MGT        0x02C
-#define PRCM_PER2CLK_MGT        0x030
-#define PRCM_PER3CLK_MGT        0x034
-#define PRCM_PER5CLK_MGT        0x038
-#define PRCM_PER6CLK_MGT        0x03C
-#define PRCM_PER7CLK_MGT        0x040
-#define PRCM_LCDCLK_MGT         0x044
-#define PRCM_BMLCLK_MGT         0x04C
-#define PRCM_HSITXCLK_MGT       0x050
-#define PRCM_HSIRXCLK_MGT       0x054
-#define PRCM_HDMICLK_MGT        0x058
-#define PRCM_APEATCLK_MGT       0x05C
-#define PRCM_APETRACECLK_MGT    0x060
-#define PRCM_MCDECLK_MGT        0x064
-#define PRCM_IPI2CCLK_MGT       0x068
-#define PRCM_DSIALTCLK_MGT      0x06C
-#define PRCM_DMACLK_MGT         0x074
-#define PRCM_B2R2CLK_MGT        0x078
-#define PRCM_TVCLK_MGT          0x07C
-#define PRCM_UNIPROCLK_MGT      0x278
-#define PRCM_SSPCLK_MGT         0x280
-#define PRCM_RNGCLK_MGT         0x284
-#define PRCM_UICCCLK_MGT        0x27C
-
 #define PRCM_CLK_MGT_CLKPLLDIV_MASK     BITS(0, 4)
 #define PRCM_CLK_MGT_CLKPLLSW_MASK      BITS(5, 7)
 #define PRCM_CLK_MGT_CLKEN              BIT(8)
 
-/* ePOD and memory power signal control registers */
-#define PRCM_EPOD_C_SET         0x410
-#define PRCM_SRAM_LS_SLEEP      0x304
+/* GPIOCR register */
+#define PRCM_GPIOCR_SPI2_SELECT BIT(23)
 
-/* Debug power control unit registers */
-#define PRCM_POWER_STATE_SET 0x254
+#define PRCM_DDR_SUBSYS_APE_MINBW       (_PRCMU_BASE + 0x438)
+#define PRCM_CGATING_BYPASS             (_PRCMU_BASE + 0x134)
+#define PRCM_CGATING_BYPASS_ICN2        BIT(6)
 
 /* Miscellaneous unit registers */
-#define PRCM_DSI_SW_RESET 0x324
-#define PRCM_GPIOCR             0x138
-
-/* GPIOCR register */
-#define PRCM_GPIOCR_SPI2_SELECT BIT(23)
+#define PRCM_RESOUTN_SET                (_PRCMU_BASE + 0x214)
+#define PRCM_RESOUTN_CLR                (_PRCMU_BASE + 0x218)
 
-#define PRCM_DDR_SUBSYS_APE_MINBW  0x438
+/* System reset register */
+#define PRCM_APE_SOFTRST                (_PRCMU_BASE + 0x228)
 
 #endif /* __DB8500_PRCMU_REGS_H */