Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (87 commits)
  [SCSI] fusion: fix domain validation loops
  [SCSI] qla2xxx: fix regression on sparc64
  [SCSI] modalias for scsi devices
  [SCSI] sg: cap reserved_size values at max_sectors
  [SCSI] BusLogic: stop using check_region
  [SCSI] tgt: fix rdma transfer bugs
  [SCSI] aacraid: fix aacraid not finding device
  [SCSI] aacraid: Correct SMC products in aacraid.txt
  [SCSI] scsi_error.c: Add EH Start Unit retry
  [SCSI] aacraid: [Fastboot] Panics for AACRAID driver during 'insmod' for kexec test.
  [SCSI] ipr: Driver version to 2.3.2
  [SCSI] ipr: Faster sg list fetch
  [SCSI] ipr: Return better qc_issue errors
  [SCSI] ipr: Disrupt device error
  [SCSI] ipr: Improve async error logging level control
  [SCSI] ipr: PCI unblock config access fix
  [SCSI] ipr: Fix for oops following SATA request sense
  [SCSI] ipr: Log error for SAS dual path switch
  [SCSI] ipr: Enable logging of debug error data for all devices
  [SCSI] ipr: Add new PCI-E IDs to device table
  ...

4 files changed, 51 insertions, 48 deletions

diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 083acfd91d8b..97471af4309c 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1531,6 +1531,7 @@ mpt_resume(struct pci_dev *pdev)
         MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
         u32 device_state = pdev->current_state;
         int recovery_state;
+        int err;
 
         printk(MYIOC_s_INFO_FMT
         "pci-resume: pdev=0x%p, slot=%s, Previous operating state [D%d]\n",
@@ -1538,7 +1539,9 @@ mpt_resume(struct pci_dev *pdev)
 
         pci_set_power_state(pdev, 0);
         pci_restore_state(pdev);
-        pci_enable_device(pdev);
+        err = pci_enable_device(pdev);
+        if (err)
+                return err;
 
         /* enable interrupts */
         CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
@@ -4739,12 +4742,8 @@ mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
 }
 
 /**
- * mpt_inactive_raid_list_free
- *
- * This clears this link list.
- *
- * @ioc - pointer to per adapter structure
- *
+ * mpt_inactive_raid_list_free - This clears this link list.
+ * @ioc : pointer to per adapter structure
  **/
 static void
 mpt_inactive_raid_list_free(MPT_ADAPTER *ioc)
@@ -4764,15 +4763,11 @@ mpt_inactive_raid_list_free(MPT_ADAPTER *ioc)
 }
 
 /**
- * mpt_inactive_raid_volumes
- *
- * This sets up link list of phy_disk_nums for devices belonging in an inactive volume
- *
- * @ioc - pointer to per adapter structure
- * @channel - volume channel
- * @id - volume target id
- *
+ * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume
  *
+ * @ioc : pointer to per adapter structure
+ * @channel : volume channel
+ * @id : volume target id
  **/
 static void
 mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id)
@@ -6663,7 +6658,7 @@ union loginfo_type {
 /**
  *      mpt_iocstatus_info_config - IOCSTATUS information for config pages
  *      @ioc: Pointer to MPT_ADAPTER structure
- *      ioc_status: U32 IOCStatus word from IOC
+ *      @ioc_status: U32 IOCStatus word from IOC
  *      @mf: Pointer to MPT request frame
  *
  *      Refer to lsi/mpi.h.
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index e3a39272aad6..d25d3be8fcd2 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -994,6 +994,7 @@ typedef struct _MPT_SCSI_HOST {
         int                       scandv_wait_done;
         long                      last_queue_full;
         u16                       tm_iocstatus;
+        u16                       spi_pending;
         struct list_head          target_reset_list;
 } MPT_SCSI_HOST;
 
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 2a3e9e66d4ef..fa0f7761652a 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -819,10 +819,7 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
                         sc->resid=0;
                 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR:        /* 0x0040 */
                 case MPI_IOCSTATUS_SUCCESS:                     /* 0x0000 */
-                        if (scsi_status == MPI_SCSI_STATUS_BUSY)
-                                sc->result = (DID_BUS_BUSY << 16) | scsi_status;
-                        else
-                                sc->result = (DID_OK << 16) | scsi_status;
+                        sc->result = (DID_OK << 16) | scsi_status;
                         if (scsi_state == 0) {
                                 ;
                         } else if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) {
@@ -1188,20 +1185,7 @@ mptscsih_suspend(struct pci_dev *pdev, pm_message_t state)
 int
 mptscsih_resume(struct pci_dev *pdev)
 {
-        MPT_ADAPTER             *ioc = pci_get_drvdata(pdev);
-        struct Scsi_Host        *host = ioc->sh;
-        MPT_SCSI_HOST           *hd;
-
-        mpt_resume(pdev);
-
-        if(!host)
-                return 0;
-
-        hd = (MPT_SCSI_HOST *)host->hostdata;
-        if(!hd)
-                return 0;
-
-        return 0;
+        return mpt_resume(pdev);
 }
 
 #endif
@@ -1537,21 +1521,23 @@ mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx)
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
  *      mptscsih_TMHandler - Generic handler for SCSI Task Management.
- *      Fall through to mpt_HardResetHandler if: not operational, too many
- *      failed TM requests or handshake failure.
- *
- *      @ioc: Pointer to MPT_ADAPTER structure
+ *      @hd: Pointer to MPT SCSI HOST structure
  *      @type: Task Management type
+ *      @channel: channel number for task management
  *      @id: Logical Target ID for reset (if appropriate)
  *      @lun: Logical Unit for reset (if appropriate)
  *      @ctx2abort: Context for the task to be aborted (if appropriate)
+ *      @timeout: timeout for task management control
+ *
+ *      Fall through to mpt_HardResetHandler if: not operational, too many
+ *      failed TM requests or handshake failure.
  *
  *      Remark: Currently invoked from a non-interrupt thread (_bh).
  *
  *      Remark: With old EH code, at most 1 SCSI TaskMgmt function per IOC
  *      will be active.
  *
- *      Returns 0 for SUCCESS, or FAILED.
+ *      Returns 0 for SUCCESS, or %FAILED.
  **/
 int
 mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout)
@@ -1650,9 +1636,11 @@ mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int c
  *      mptscsih_IssueTaskMgmt - Generic send Task Management function.
  *      @hd: Pointer to MPT_SCSI_HOST structure
  *      @type: Task Management type
+ *      @channel: channel number for task management
  *      @id: Logical Target ID for reset (if appropriate)
  *      @lun: Logical Unit for reset (if appropriate)
  *      @ctx2abort: Context for the task to be aborted (if appropriate)
+ *      @timeout: timeout for task management control
  *
  *      Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
  *      or a non-interrupt thread.  In the former, must not call schedule().
@@ -2022,6 +2010,7 @@ mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd)
 /**
  *      mptscsih_tm_wait_for_completion - wait for completion of TM task
  *      @hd: Pointer to MPT host structure.
+ *      @timeout: timeout value
  *
  *      Returns {SUCCESS,FAILED}.
  */
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 85f21b54cb7d..d75f7ffbb02e 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -96,14 +96,13 @@ static int	mptspiTaskCtx = -1;
 static int      mptspiInternalCtx = -1; /* Used only for internal commands */
 
 /**
- *      mptspi_setTargetNegoParms  - Update the target negotiation
- *      parameters based on the the Inquiry data, adapter capabilities,
- *      and NVRAM settings
- *
+ *      mptspi_setTargetNegoParms  - Update the target negotiation parameters
  *      @hd: Pointer to a SCSI Host Structure
- *      @vtarget: per target private data
+ *      @target: per target private data
  *      @sdev: SCSI device
  *
+ *      Update the target negotiation parameters based on the the Inquiry
+ *      data, adapter capabilities, and NVRAM settings.
  **/
 static void
 mptspi_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target,
@@ -234,7 +233,7 @@ mptspi_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target,
 /**
  *      mptspi_writeIOCPage4  - write IOC Page 4
  *      @hd: Pointer to a SCSI Host Structure
- *      @channel:
+ *      @channel: channel number
  *      @id: write IOC Page4 for this ID & Bus
  *
  *      Return: -EAGAIN if unable to obtain a Message Frame
@@ -446,7 +445,7 @@ static int mptspi_target_alloc(struct scsi_target *starget)
         return 0;
 }
 
-void
+static void
 mptspi_target_destroy(struct scsi_target *starget)
 {
         if (starget->hostdata)
@@ -677,7 +676,9 @@ static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd,
                 return;
         }
 
+        hd->spi_pending |= (1 << sdev->id);
         spi_dv_device(sdev);
+        hd->spi_pending &= ~(1 << sdev->id);
 
         if (sdev->channel == 1 &&
             mptscsih_quiesce_raid(hd, 0, vtarget->channel, vtarget->id) < 0)
@@ -1203,11 +1204,27 @@ mptspi_dv_renegotiate_work(struct work_struct *work)
                 container_of(work, struct work_queue_wrapper, work);
         struct _MPT_SCSI_HOST *hd = wqw->hd;
         struct scsi_device *sdev;
+        struct scsi_target *starget;
+        struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
+        u32 nego;
 
         kfree(wqw);
 
-        shost_for_each_device(sdev, hd->ioc->sh)
-                mptspi_dv_device(hd, sdev);
+        if (hd->spi_pending) {
+                shost_for_each_device(sdev, hd->ioc->sh) {
+                        if  (hd->spi_pending & (1 << sdev->id))
+                                continue;
+                        starget = scsi_target(sdev);
+                        nego = mptspi_getRP(starget);
+                        pg1.RequestedParameters = cpu_to_le32(nego);
+                        pg1.Reserved = 0;
+                        pg1.Configuration = 0;
+                        mptspi_write_spi_device_pg1(starget, &pg1);
+                }
+        } else {
+                shost_for_each_device(sdev, hd->ioc->sh)
+                        mptspi_dv_device(hd, sdev);
+        }
 }
 
 static void
@@ -1453,6 +1470,7 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
         init_waitqueue_head(&hd->scandv_waitq);
         hd->scandv_wait_done = 0;
         hd->last_queue_full = 0;
+        hd->spi_pending = 0;
 
         /* Some versions of the firmware don't support page 0; without
          * that we can't get the parameters */