[PATCH] I2O: new sysfs attributes and Adaptec specific block device access and 64-bit DMA support

Changes:
 - Added Bus-OSM which could be used by user space programs to reset a
   channel on the controller
 - Make ioctl's in Config-OSM obsolete in prefer for sysfs attributes and
   move those to its own file
 - Added sysfs attribute for firmware read and write access for I2O
   controllers
 - Added special handling of firmware read and write access for Adaptec
   controllers
 - Added vendor id and product id as sysfs-attribute to Executive classes
 - Added automatic notification of LCT change handling to Exec-OSM
 - Added flushing function to Block-OSM for later barrier implementation
 - Use PRIVATE messages for Block access on Adaptec controllers, which are
   faster then BLOCK class access
 - Cleaned up support for Promise controller
 - New messages are now detected using the IRQ status register as
   suggested by the I2O spec
 - Added i2o_dma_high() and i2o_dma_low() functions
 - Added facility for SG tablesize calculation when using 32-bit and
   64-bit DMA addresses
 - Added i2o_dma_map_single() and i2o_dma_map_sg() which could build the
   SG list for 32-bit as well as 64-bit DMA addresses

Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 2 insertions, 154 deletions

diff --git a/drivers/message/i2o/i2o_config.c b/drivers/message/i2o/i2o_config.c
index 383e89a5c9f0..849d90aad779 100644
--- a/drivers/message/i2o/i2o_config.c
+++ b/drivers/message/i2o/i2o_config.c
@@ -30,27 +30,11 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/i2o.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
 #include <linux/miscdevice.h>
-#include <linux/mm.h>
-#include <linux/spinlock.h>
 #include <linux/smp_lock.h>
-#include <linux/ioctl32.h>
 #include <linux/compat.h>
-#include <linux/syscalls.h>
 
 #include <asm/uaccess.h>
-#include <asm/io.h>
-
-#define OSM_NAME        "config-osm"
-#define OSM_VERSION     "$Rev$"
-#define OSM_DESCRIPTION "I2O Configuration OSM"
 
 extern int i2o_parm_issue(struct i2o_device *, int, void *, int, void *, int);
 
@@ -80,125 +64,6 @@ struct i2o_cfg_info {
 static struct i2o_cfg_info *open_files = NULL;
 static ulong i2o_cfg_info_id = 0;
 
-/**
- *      i2o_config_read_hrt - Returns the HRT of the controller
- *      @kob: kernel object handle
- *      @buf: buffer into which the HRT should be copied
- *      @off: file offset
- *      @count: number of bytes to read
- *
- *      Put @count bytes starting at @off into @buf from the HRT of the I2O
- *      controller corresponding to @kobj.
- *
- *      Returns number of bytes copied into buffer.
- */
-static ssize_t i2o_config_read_hrt(struct kobject *kobj, char *buf,
-                                   loff_t offset, size_t count)
-{
-        struct i2o_controller *c = to_i2o_controller(container_of(kobj,
-                                                                  struct device,
-                                                                  kobj));
-        i2o_hrt *hrt = c->hrt.virt;
-
-        u32 size = (hrt->num_entries * hrt->entry_len + 2) * 4;
-
-        if(offset > size)
-                return 0;
-
-        if(offset + count > size)
-                count = size - offset;
-
-        memcpy(buf, (u8 *) hrt + offset, count);
-
-        return count;
-};
-
-/**
- *      i2o_config_read_lct - Returns the LCT of the controller
- *      @kob: kernel object handle
- *      @buf: buffer into which the LCT should be copied
- *      @off: file offset
- *      @count: number of bytes to read
- *
- *      Put @count bytes starting at @off into @buf from the LCT of the I2O
- *      controller corresponding to @kobj.
- *
- *      Returns number of bytes copied into buffer.
- */
-static ssize_t i2o_config_read_lct(struct kobject *kobj, char *buf,
-                                   loff_t offset, size_t count)
-{
-        struct i2o_controller *c = to_i2o_controller(container_of(kobj,
-                                                                  struct device,
-                                                                  kobj));
-        u32 size = c->lct->table_size * 4;
-
-        if(offset > size)
-                return 0;
-
-        if(offset + count > size)
-                count = size - offset;
-
-        memcpy(buf, (u8 *) c->lct + offset, count);
-
-        return count;
-};
-
-/* attribute for HRT in sysfs */
-static struct bin_attribute i2o_config_hrt_attr = {
-        .attr = {
-                .name = "hrt",
-                .mode = S_IRUGO,
-                .owner = THIS_MODULE
-        },
-        .size = 0,
-        .read = i2o_config_read_hrt
-};
-
-/* attribute for LCT in sysfs */
-static struct bin_attribute i2o_config_lct_attr = {
-        .attr = {
-                .name = "lct",
-                .mode = S_IRUGO,
-                .owner = THIS_MODULE
-        },
-        .size = 0,
-        .read = i2o_config_read_lct
-};
-
-/**
- *      i2o_config_notify_controller_add - Notify of added controller
- *      @c: the controller which was added
- *
- *      If a I2O controller is added, we catch the notification to add sysfs
- *      entries.
- */
-static void i2o_config_notify_controller_add(struct i2o_controller *c)
-{
-        sysfs_create_bin_file(&(c->device.kobj), &i2o_config_hrt_attr);
-        sysfs_create_bin_file(&(c->device.kobj), &i2o_config_lct_attr);
-};
-
-/**
- *      i2o_config_notify_controller_remove - Notify of removed controller
- *      @c: the controller which was removed
- *
- *      If a I2O controller is removed, we catch the notification to remove the
- *      sysfs entries.
- */
-static void i2o_config_notify_controller_remove(struct i2o_controller *c)
-{
-        sysfs_remove_bin_file(&c->device.kobj, &i2o_config_lct_attr);
-        sysfs_remove_bin_file(&c->device.kobj, &i2o_config_hrt_attr);
-};
-
-/* Config OSM driver struct */
-static struct i2o_driver i2o_config_driver = {
-        .name = OSM_NAME,
-        .notify_controller_add = i2o_config_notify_controller_add,
-        .notify_controller_remove = i2o_config_notify_controller_remove
-};
-
 static int i2o_cfg_getiops(unsigned long arg)
 {
         struct i2o_controller *c;
@@ -1257,37 +1122,20 @@ static struct miscdevice i2o_miscdev = {
         &config_fops
 };
 
-static int __init i2o_config_init(void)
+static int __init i2o_config_old_init(void)
 {
-        printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n");
-
         spin_lock_init(&i2o_config_lock);
 
         if (misc_register(&i2o_miscdev) < 0) {
                 osm_err("can't register device.\n");
                 return -EBUSY;
         }
-        /*
-         *      Install our handler
-         */
-        if (i2o_driver_register(&i2o_config_driver)) {
-                osm_err("handler register failed.\n");
-                misc_deregister(&i2o_miscdev);
-                return -EBUSY;
-        }
         return 0;
 }
 
-static void i2o_config_exit(void)
+static void i2o_config_old_exit(void)
 {
         misc_deregister(&i2o_miscdev);
-        i2o_driver_unregister(&i2o_config_driver);
 }
 
 MODULE_AUTHOR("Red Hat Software");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION(OSM_DESCRIPTION);
-MODULE_VERSION(OSM_VERSION);
-
-module_init(i2o_config_init);
-module_exit(i2o_config_exit);