memstick: add driver for Ricoh R5C592 card reader

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Acked-by: Alex Dubov <oakad@yahoo.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 175 insertions, 0 deletions

diff --git a/drivers/memstick/host/r592.h b/drivers/memstick/host/r592.h
new file mode 100644
index 000000000000..eee264e6028f
--- /dev/null
+++ b/drivers/memstick/host/r592.h
@@ -0,0 +1,175 @@
+/*
+ * Copyright (C) 2010 - Maxim Levitsky
+ * driver for Ricoh memstick readers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef R592_H
+
+#include <linux/memstick.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/kfifo.h>
+#include <linux/ctype.h>
+
+/* write to this reg (number,len) triggers TPC execution */
+#define R592_TPC_EXEC                   0x00
+#define R592_TPC_EXEC_LEN_SHIFT         16              /* Bits 16..25 are TPC len */
+#define R592_TPC_EXEC_BIG_FIFO          (1 << 26)       /* If bit 26 is set, large fifo is used (reg 48) */
+#define R592_TPC_EXEC_TPC_SHIFT         28              /* Bits 28..31 are the TPC number */
+
+
+/* Window for small TPC fifo (big endian)*/
+/* reads and writes always are done in  8 byte chunks */
+/* Not used in driver, because large fifo does better job */
+#define R592_SFIFO                      0x08
+
+
+/* Status register (ms int, small fifo, IO)*/
+#define R592_STATUS                     0x10
+                                                        /* Parallel INT bits */
+#define R592_STATUS_P_CMDNACK           (1 << 16)       /* INT reg: NACK (parallel mode) */
+#define R592_STATUS_P_BREQ              (1 << 17)       /* INT reg: card ready (parallel mode)*/
+#define R592_STATUS_P_INTERR            (1 << 18)       /* INT reg: int error (parallel mode)*/
+#define R592_STATUS_P_CED               (1 << 19)       /* INT reg: command done (parallel mode) */
+
+                                                        /* Fifo status */
+#define R592_STATUS_SFIFO_FULL          (1 << 20)       /* Small Fifo almost full (last chunk is written) */
+#define R592_STATUS_SFIFO_EMPTY         (1 << 21)       /* Small Fifo empty */
+
+                                                        /* Error detection via CRC */
+#define R592_STATUS_SEND_ERR            (1 << 24)       /* Send failed */
+#define R592_STATUS_RECV_ERR            (1 << 25)       /* Recieve failed */
+
+                                                        /* Card state */
+#define R592_STATUS_RDY                 (1 << 28)       /* RDY signal recieved */
+#define R592_STATUS_CED                 (1 << 29)       /* INT: Command done (serial mode)*/
+#define R592_STATUS_SFIFO_INPUT         (1 << 30)       /* Small fifo recieved data*/
+
+#define R592_SFIFO_SIZE                 32              /* total size of small fifo is 32 bytes */
+#define R592_SFIFO_PACKET               8               /* packet size of small fifo */
+
+/* IO control */
+#define R592_IO                         0x18
+#define R592_IO_16                      (1 << 16)       /* Set by default, can be cleared */
+#define R592_IO_18                      (1 << 18)       /* Set by default, can be cleared */
+#define R592_IO_SERIAL1                 (1 << 20)       /* Set by default, can be cleared, (cleared on parallel) */
+#define R592_IO_22                      (1 << 22)       /* Set by default, can be cleared */
+#define R592_IO_DIRECTION               (1 << 24)       /* TPC direction (1 write 0 read) */
+#define R592_IO_26                      (1 << 26)       /* Set by default, can be cleared */
+#define R592_IO_SERIAL2                 (1 << 30)       /* Set by default, can be cleared (cleared on parallel), serial doesn't work if unset */
+#define R592_IO_RESET                   (1 << 31)       /* Reset, sets defaults*/
+
+
+/* Turns hardware on/off */
+#define R592_POWER                      0x20            /* bits 0-7 writeable */
+#define R592_POWER_0                    (1 << 0)        /* set on start, cleared on stop - must be set*/
+#define R592_POWER_1                    (1 << 1)        /* set on start, cleared on stop - must be set*/
+#define R592_POWER_3                    (1 << 3)        /* must be clear */
+#define R592_POWER_20                   (1 << 5)        /* set before switch to parallel */
+
+/* IO mode*/
+#define R592_IO_MODE                    0x24
+#define R592_IO_MODE_SERIAL             1
+#define R592_IO_MODE_PARALLEL           3
+
+
+/* IRQ,card detection,large fifo (first word irq status, second enable) */
+/* IRQs are ACKed by clearing the bits */
+#define R592_REG_MSC                    0x28
+#define R592_REG_MSC_PRSNT              (1 << 1)        /* card present (only status)*/
+#define R592_REG_MSC_IRQ_INSERT         (1 << 8)        /* detect insert / card insered */
+#define R592_REG_MSC_IRQ_REMOVE         (1 << 9)        /* detect removal / card removed */
+#define R592_REG_MSC_FIFO_EMPTY         (1 << 10)       /* fifo is empty */
+#define R592_REG_MSC_FIFO_DMA_DONE      (1 << 11)       /* dma enable / dma done */
+
+#define R592_REG_MSC_FIFO_USER_ORN      (1 << 12)       /* set if software reads empty fifo (if R592_REG_MSC_FIFO_EMPTY is set) */
+#define R592_REG_MSC_FIFO_MISMATH       (1 << 13)       /* set if amount of data in fifo doesn't match amount in TPC */
+#define R592_REG_MSC_FIFO_DMA_ERR       (1 << 14)       /* IO failure */
+#define R592_REG_MSC_LED                (1 << 15)       /* clear to turn led off (only status)*/
+
+#define DMA_IRQ_ACK_MASK \
+        (R592_REG_MSC_FIFO_DMA_DONE | R592_REG_MSC_FIFO_DMA_ERR)
+
+#define DMA_IRQ_EN_MASK (DMA_IRQ_ACK_MASK << 16)
+
+#define IRQ_ALL_ACK_MASK 0x00007F00
+#define IRQ_ALL_EN_MASK (IRQ_ALL_ACK_MASK << 16)
+
+/* DMA address for large FIFO read/writes*/
+#define R592_FIFO_DMA                   0x2C
+
+/* PIO access to large FIFO (512 bytes) (big endian)*/
+#define R592_FIFO_PIO                   0x30
+#define R592_LFIFO_SIZE                 512             /* large fifo size */
+
+
+/* large FIFO DMA settings */
+#define R592_FIFO_DMA_SETTINGS          0x34
+#define R592_FIFO_DMA_SETTINGS_EN       (1 << 0)        /* DMA enabled */
+#define R592_FIFO_DMA_SETTINGS_DIR      (1 << 1)        /* Dma direction (1 read, 0 write) */
+#define R592_FIFO_DMA_SETTINGS_CAP      (1 << 24)       /* Dma is aviable */
+
+/* Maybe just an delay */
+/* Bits 17..19 are just number */
+/* bit 16 is set, then bit 20 is waited */
+/* time to wait is about 50 spins * 2 ^ (bits 17..19) */
+/* seems to be possible just to ignore */
+/* Probably debug register */
+#define R592_REG38                      0x38
+#define R592_REG38_CHANGE               (1 << 16)       /* Start bit */
+#define R592_REG38_DONE                 (1 << 20)       /* HW set this after the delay */
+#define R592_REG38_SHIFT                17
+
+/* Debug register, written (0xABCDEF00) when error happens - not used*/
+#define R592_REG_3C                     0x3C
+
+struct r592_device {
+        struct pci_dev *pci_dev;
+        struct memstick_host    *host;          /* host backpointer */
+        struct memstick_request *req;           /* current request */
+
+        /* Registers, IRQ */
+        void __iomem *mmio;
+        int irq;
+        spinlock_t irq_lock;
+        spinlock_t io_thread_lock;
+        struct timer_list detect_timer;
+
+        struct task_struct *io_thread;
+        bool parallel_mode;
+
+        DECLARE_KFIFO(pio_fifo, u8, sizeof(u32));
+
+        /* DMA area */
+        int dma_capable;
+        int dma_error;
+        struct completion dma_done;
+        void *dummy_dma_page;
+        dma_addr_t dummy_dma_page_physical_address;
+
+};
+
+#define DRV_NAME "r592"
+
+
+#define message(format, ...) \
+        printk(KERN_INFO DRV_NAME ": " format "\n", ## __VA_ARGS__)
+
+#define __dbg(level, format, ...) \
+        do { \
+                if (debug >= level) \
+                        printk(KERN_DEBUG DRV_NAME \
+                                ": " format "\n", ## __VA_ARGS__); \
+        } while (0)
+
+
+#define dbg(format, ...)                __dbg(1, format, ## __VA_ARGS__)
+#define dbg_verbose(format, ...)        __dbg(2, format, ## __VA_ARGS__)
+#define dbg_reg(format, ...)            __dbg(3, format, ## __VA_ARGS__)
+
+#endif