diff options
author | Tomasz Stanislawski <t.stanislaws@samsung.com> | 2011-09-20 11:53:55 -0400 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2012-02-28 16:25:46 -0500 |
commit | 56e1df491b803dc962ba47adcdaf4ad034c697a8 (patch) | |
tree | a67b6e259ecf97fce27a85b5183869f23b6faa1c /drivers/media | |
parent | e861dccc6d8d870d764ed950417cfb0e65889b90 (diff) |
[media] v4l: s5p-tv: add sii9234 driver
SiI9234 is a converter of HDMI signal into MHL. The chip is present on some
boards from Samsung S5P family. The chip's configuration procedure is based on
MHD_SiI9234 driver created by doonsoo45.kim.
The driver is using:
- i2c framework
- v4l2 framework
- runtime PM
Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers/media')
-rw-r--r-- | drivers/media/video/s5p-tv/Kconfig | 10 | ||||
-rw-r--r-- | drivers/media/video/s5p-tv/Makefile | 2 | ||||
-rw-r--r-- | drivers/media/video/s5p-tv/sii9234_drv.c | 432 |
3 files changed, 444 insertions, 0 deletions
diff --git a/drivers/media/video/s5p-tv/Kconfig b/drivers/media/video/s5p-tv/Kconfig index f2a09779ec8f..f248b2856720 100644 --- a/drivers/media/video/s5p-tv/Kconfig +++ b/drivers/media/video/s5p-tv/Kconfig | |||
@@ -46,6 +46,16 @@ config VIDEO_SAMSUNG_S5P_HDMIPHY | |||
46 | as module. It is an I2C driver, that exposes a V4L2 | 46 | as module. It is an I2C driver, that exposes a V4L2 |
47 | subdev for use by other drivers. | 47 | subdev for use by other drivers. |
48 | 48 | ||
49 | config VIDEO_SAMSUNG_S5P_SII9234 | ||
50 | tristate "Samsung SII9234 Driver" | ||
51 | depends on VIDEO_DEV && VIDEO_V4L2 && I2C | ||
52 | depends on VIDEO_SAMSUNG_S5P_TV | ||
53 | help | ||
54 | Say Y here if you want support for the MHL interface | ||
55 | in S5P Samsung SoC. The driver can be compiled | ||
56 | as module. It is an I2C driver, that exposes a V4L2 | ||
57 | subdev for use by other drivers. | ||
58 | |||
49 | config VIDEO_SAMSUNG_S5P_SDO | 59 | config VIDEO_SAMSUNG_S5P_SDO |
50 | tristate "Samsung Analog TV Driver" | 60 | tristate "Samsung Analog TV Driver" |
51 | depends on VIDEO_DEV && VIDEO_V4L2 | 61 | depends on VIDEO_DEV && VIDEO_V4L2 |
diff --git a/drivers/media/video/s5p-tv/Makefile b/drivers/media/video/s5p-tv/Makefile index 37e4c17663b4..f49e756a2fde 100644 --- a/drivers/media/video/s5p-tv/Makefile +++ b/drivers/media/video/s5p-tv/Makefile | |||
@@ -8,6 +8,8 @@ | |||
8 | 8 | ||
9 | obj-$(CONFIG_VIDEO_SAMSUNG_S5P_HDMIPHY) += s5p-hdmiphy.o | 9 | obj-$(CONFIG_VIDEO_SAMSUNG_S5P_HDMIPHY) += s5p-hdmiphy.o |
10 | s5p-hdmiphy-y += hdmiphy_drv.o | 10 | s5p-hdmiphy-y += hdmiphy_drv.o |
11 | obj-$(CONFIG_VIDEO_SAMSUNG_S5P_SII9234) += s5p-sii9234.o | ||
12 | s5p-sii9234-y += sii9234_drv.o | ||
11 | obj-$(CONFIG_VIDEO_SAMSUNG_S5P_HDMI) += s5p-hdmi.o | 13 | obj-$(CONFIG_VIDEO_SAMSUNG_S5P_HDMI) += s5p-hdmi.o |
12 | s5p-hdmi-y += hdmi_drv.o | 14 | s5p-hdmi-y += hdmi_drv.o |
13 | obj-$(CONFIG_VIDEO_SAMSUNG_S5P_SDO) += s5p-sdo.o | 15 | obj-$(CONFIG_VIDEO_SAMSUNG_S5P_SDO) += s5p-sdo.o |
diff --git a/drivers/media/video/s5p-tv/sii9234_drv.c b/drivers/media/video/s5p-tv/sii9234_drv.c new file mode 100644 index 000000000000..0f31eccd7b80 --- /dev/null +++ b/drivers/media/video/s5p-tv/sii9234_drv.c | |||
@@ -0,0 +1,432 @@ | |||
1 | /* | ||
2 | * Samsung MHL interface driver | ||
3 | * | ||
4 | * Copyright (C) 2011 Samsung Electronics Co.Ltd | ||
5 | * Author: Tomasz Stanislawski <t.stanislaws@samsung.com> | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify it | ||
8 | * under the terms of the GNU General Public License as published by the | ||
9 | * Free Software Foundation; either version 2 of the License, or (at your | ||
10 | * option) any later version. | ||
11 | */ | ||
12 | |||
13 | #include <linux/delay.h> | ||
14 | #include <linux/err.h> | ||
15 | #include <linux/freezer.h> | ||
16 | #include <linux/gpio.h> | ||
17 | #include <linux/i2c.h> | ||
18 | #include <linux/interrupt.h> | ||
19 | #include <linux/irq.h> | ||
20 | #include <linux/kthread.h> | ||
21 | #include <linux/module.h> | ||
22 | #include <linux/pm_runtime.h> | ||
23 | #include <linux/regulator/machine.h> | ||
24 | #include <linux/slab.h> | ||
25 | |||
26 | #include <mach/gpio.h> | ||
27 | #include <plat/gpio-cfg.h> | ||
28 | |||
29 | #include <media/sii9234.h> | ||
30 | #include <media/v4l2-subdev.h> | ||
31 | |||
32 | MODULE_AUTHOR("Tomasz Stanislawski <t.stanislaws@samsung.com>"); | ||
33 | MODULE_DESCRIPTION("Samsung MHL interface driver"); | ||
34 | MODULE_LICENSE("GPL"); | ||
35 | |||
36 | struct sii9234_context { | ||
37 | struct i2c_client *client; | ||
38 | struct regulator *power; | ||
39 | int gpio_n_reset; | ||
40 | struct v4l2_subdev sd; | ||
41 | }; | ||
42 | |||
43 | static inline struct sii9234_context *sd_to_context(struct v4l2_subdev *sd) | ||
44 | { | ||
45 | return container_of(sd, struct sii9234_context, sd); | ||
46 | } | ||
47 | |||
48 | static inline int sii9234_readb(struct i2c_client *client, int addr) | ||
49 | { | ||
50 | return i2c_smbus_read_byte_data(client, addr); | ||
51 | } | ||
52 | |||
53 | static inline int sii9234_writeb(struct i2c_client *client, int addr, int value) | ||
54 | { | ||
55 | return i2c_smbus_write_byte_data(client, addr, value); | ||
56 | } | ||
57 | |||
58 | static inline int sii9234_writeb_mask(struct i2c_client *client, int addr, | ||
59 | int value, int mask) | ||
60 | { | ||
61 | int ret; | ||
62 | |||
63 | ret = i2c_smbus_read_byte_data(client, addr); | ||
64 | if (ret < 0) | ||
65 | return ret; | ||
66 | ret = (ret & ~mask) | (value & mask); | ||
67 | return i2c_smbus_write_byte_data(client, addr, ret); | ||
68 | } | ||
69 | |||
70 | static inline int sii9234_readb_idx(struct i2c_client *client, int addr) | ||
71 | { | ||
72 | int ret; | ||
73 | ret = i2c_smbus_write_byte_data(client, 0xbc, addr >> 8); | ||
74 | if (ret < 0) | ||
75 | return ret; | ||
76 | ret = i2c_smbus_write_byte_data(client, 0xbd, addr & 0xff); | ||
77 | if (ret < 0) | ||
78 | return ret; | ||
79 | return i2c_smbus_read_byte_data(client, 0xbe); | ||
80 | } | ||
81 | |||
82 | static inline int sii9234_writeb_idx(struct i2c_client *client, int addr, | ||
83 | int value) | ||
84 | { | ||
85 | int ret; | ||
86 | ret = i2c_smbus_write_byte_data(client, 0xbc, addr >> 8); | ||
87 | if (ret < 0) | ||
88 | return ret; | ||
89 | ret = i2c_smbus_write_byte_data(client, 0xbd, addr & 0xff); | ||
90 | if (ret < 0) | ||
91 | return ret; | ||
92 | ret = i2c_smbus_write_byte_data(client, 0xbe, value); | ||
93 | return ret; | ||
94 | } | ||
95 | |||
96 | static inline int sii9234_writeb_idx_mask(struct i2c_client *client, int addr, | ||
97 | int value, int mask) | ||
98 | { | ||
99 | int ret; | ||
100 | |||
101 | ret = sii9234_readb_idx(client, addr); | ||
102 | if (ret < 0) | ||
103 | return ret; | ||
104 | ret = (ret & ~mask) | (value & mask); | ||
105 | return sii9234_writeb_idx(client, addr, ret); | ||
106 | } | ||
107 | |||
108 | static int sii9234_reset(struct sii9234_context *ctx) | ||
109 | { | ||
110 | struct i2c_client *client = ctx->client; | ||
111 | struct device *dev = &client->dev; | ||
112 | int ret, tries; | ||
113 | |||
114 | gpio_direction_output(ctx->gpio_n_reset, 1); | ||
115 | mdelay(1); | ||
116 | gpio_direction_output(ctx->gpio_n_reset, 0); | ||
117 | mdelay(1); | ||
118 | gpio_direction_output(ctx->gpio_n_reset, 1); | ||
119 | mdelay(1); | ||
120 | |||
121 | /* going to TTPI mode */ | ||
122 | ret = sii9234_writeb(client, 0xc7, 0); | ||
123 | if (ret < 0) { | ||
124 | dev_err(dev, "failed to set TTPI mode\n"); | ||
125 | return ret; | ||
126 | } | ||
127 | for (tries = 0; tries < 100 ; ++tries) { | ||
128 | ret = sii9234_readb(client, 0x1b); | ||
129 | if (ret > 0) | ||
130 | break; | ||
131 | if (ret < 0) { | ||
132 | dev_err(dev, "failed to reset device\n"); | ||
133 | return -EIO; | ||
134 | } | ||
135 | mdelay(1); | ||
136 | } | ||
137 | if (tries == 100) { | ||
138 | dev_err(dev, "maximal number of tries reached\n"); | ||
139 | return -EIO; | ||
140 | } | ||
141 | |||
142 | return 0; | ||
143 | } | ||
144 | |||
145 | static int sii9234_verify_version(struct i2c_client *client) | ||
146 | { | ||
147 | struct device *dev = &client->dev; | ||
148 | int family, rev, tpi_rev, dev_id, sub_id, hdcp, id; | ||
149 | |||
150 | family = sii9234_readb(client, 0x1b); | ||
151 | rev = sii9234_readb(client, 0x1c) & 0x0f; | ||
152 | tpi_rev = sii9234_readb(client, 0x1d) & 0x7f; | ||
153 | dev_id = sii9234_readb_idx(client, 0x0103); | ||
154 | sub_id = sii9234_readb_idx(client, 0x0102); | ||
155 | hdcp = sii9234_readb(client, 0x30); | ||
156 | |||
157 | if (family < 0 || rev < 0 || tpi_rev < 0 || dev_id < 0 || | ||
158 | sub_id < 0 || hdcp < 0) { | ||
159 | dev_err(dev, "failed to read chip's version\n"); | ||
160 | return -EIO; | ||
161 | } | ||
162 | |||
163 | id = (dev_id << 8) | sub_id; | ||
164 | |||
165 | dev_info(dev, "chip: SiL%02x family: %02x, rev: %02x\n", | ||
166 | id, family, rev); | ||
167 | dev_info(dev, "tpi_rev:%02x, hdcp: %02x\n", tpi_rev, hdcp); | ||
168 | if (id != 0x9234) { | ||
169 | dev_err(dev, "not supported chip\n"); | ||
170 | return -ENODEV; | ||
171 | } | ||
172 | |||
173 | return 0; | ||
174 | } | ||
175 | |||
176 | static u8 data[][3] = { | ||
177 | /* setup from driver created by doonsoo45.kim */ | ||
178 | { 0x01, 0x05, 0x04 }, /* Enable Auto soft reset on SCDT = 0 */ | ||
179 | { 0x01, 0x08, 0x35 }, /* Power Up TMDS Tx Core */ | ||
180 | { 0x01, 0x0d, 0x1c }, /* HDMI Transcode mode enable */ | ||
181 | { 0x01, 0x2b, 0x01 }, /* Enable HDCP Compliance workaround */ | ||
182 | { 0x01, 0x79, 0x40 }, /* daniel test...MHL_INT */ | ||
183 | { 0x01, 0x80, 0x34 }, /* Enable Rx PLL Clock Value */ | ||
184 | { 0x01, 0x90, 0x27 }, /* Enable CBUS discovery */ | ||
185 | { 0x01, 0x91, 0xe5 }, /* Skip RGND detection */ | ||
186 | { 0x01, 0x92, 0x46 }, /* Force MHD mode */ | ||
187 | { 0x01, 0x93, 0xdc }, /* Disable CBUS pull-up during RGND measurement */ | ||
188 | { 0x01, 0x94, 0x66 }, /* 1.8V CBUS VTH & GND threshold */ | ||
189 | { 0x01, 0x95, 0x31 }, /* RGND block & single discovery attempt */ | ||
190 | { 0x01, 0x96, 0x22 }, /* use 1K and 2K setting */ | ||
191 | { 0x01, 0xa0, 0x10 }, /* SIMG: Term mode */ | ||
192 | { 0x01, 0xa1, 0xfc }, /* Disable internal Mobile HD driver */ | ||
193 | { 0x01, 0xa3, 0xfa }, /* SIMG: Output Swing default EB, 3x Clk Mult */ | ||
194 | { 0x01, 0xa5, 0x80 }, /* SIMG: RGND Hysterisis, 3x mode for Beast */ | ||
195 | { 0x01, 0xa6, 0x0c }, /* SIMG: Swing Offset */ | ||
196 | { 0x02, 0x3d, 0x3f }, /* Power up CVCC 1.2V core */ | ||
197 | { 0x03, 0x00, 0x00 }, /* SIMG: correcting HW default */ | ||
198 | { 0x03, 0x11, 0x01 }, /* Enable TxPLL Clock */ | ||
199 | { 0x03, 0x12, 0x15 }, /* Enable Tx Clock Path & Equalizer */ | ||
200 | { 0x03, 0x13, 0x60 }, /* SIMG: Set termination value */ | ||
201 | { 0x03, 0x14, 0xf0 }, /* SIMG: Change CKDT level */ | ||
202 | { 0x03, 0x17, 0x07 }, /* SIMG: PLL Calrefsel */ | ||
203 | { 0x03, 0x1a, 0x20 }, /* VCO Cal */ | ||
204 | { 0x03, 0x22, 0xe0 }, /* SIMG: Auto EQ */ | ||
205 | { 0x03, 0x23, 0xc0 }, /* SIMG: Auto EQ */ | ||
206 | { 0x03, 0x24, 0xa0 }, /* SIMG: Auto EQ */ | ||
207 | { 0x03, 0x25, 0x80 }, /* SIMG: Auto EQ */ | ||
208 | { 0x03, 0x26, 0x60 }, /* SIMG: Auto EQ */ | ||
209 | { 0x03, 0x27, 0x40 }, /* SIMG: Auto EQ */ | ||
210 | { 0x03, 0x28, 0x20 }, /* SIMG: Auto EQ */ | ||
211 | { 0x03, 0x29, 0x00 }, /* SIMG: Auto EQ */ | ||
212 | { 0x03, 0x31, 0x0b }, /* SIMG: Rx PLL BW value from I2C BW ~ 4MHz */ | ||
213 | { 0x03, 0x45, 0x06 }, /* SIMG: DPLL Mode */ | ||
214 | { 0x03, 0x4b, 0x06 }, /* SIMG: Correcting HW default */ | ||
215 | { 0x03, 0x4c, 0xa0 }, /* Manual zone control */ | ||
216 | { 0x03, 0x4d, 0x02 }, /* SIMG: PLL Mode Value (order is important) */ | ||
217 | }; | ||
218 | |||
219 | static int sii9234_set_internal(struct sii9234_context *ctx) | ||
220 | { | ||
221 | struct i2c_client *client = ctx->client; | ||
222 | int i, ret; | ||
223 | |||
224 | for (i = 0; i < ARRAY_SIZE(data); ++i) { | ||
225 | int addr = (data[i][0] << 8) | data[i][1]; | ||
226 | ret = sii9234_writeb_idx(client, addr, data[i][2]); | ||
227 | if (ret < 0) | ||
228 | return ret; | ||
229 | } | ||
230 | return 0; | ||
231 | } | ||
232 | |||
233 | static int sii9234_runtime_suspend(struct device *dev) | ||
234 | { | ||
235 | struct v4l2_subdev *sd = dev_get_drvdata(dev); | ||
236 | struct sii9234_context *ctx = sd_to_context(sd); | ||
237 | struct i2c_client *client = ctx->client; | ||
238 | |||
239 | dev_info(dev, "suspend start\n"); | ||
240 | |||
241 | sii9234_writeb_mask(client, 0x1e, 3, 3); | ||
242 | regulator_disable(ctx->power); | ||
243 | |||
244 | return 0; | ||
245 | } | ||
246 | |||
247 | static int sii9234_runtime_resume(struct device *dev) | ||
248 | { | ||
249 | struct v4l2_subdev *sd = dev_get_drvdata(dev); | ||
250 | struct sii9234_context *ctx = sd_to_context(sd); | ||
251 | struct i2c_client *client = ctx->client; | ||
252 | int ret; | ||
253 | |||
254 | dev_info(dev, "resume start\n"); | ||
255 | regulator_enable(ctx->power); | ||
256 | |||
257 | ret = sii9234_reset(ctx); | ||
258 | if (ret) | ||
259 | goto fail; | ||
260 | |||
261 | /* enable tpi */ | ||
262 | ret = sii9234_writeb_mask(client, 0x1e, 1, 0); | ||
263 | if (ret < 0) | ||
264 | goto fail; | ||
265 | ret = sii9234_set_internal(ctx); | ||
266 | if (ret < 0) | ||
267 | goto fail; | ||
268 | |||
269 | return 0; | ||
270 | |||
271 | fail: | ||
272 | dev_err(dev, "failed to resume\n"); | ||
273 | regulator_disable(ctx->power); | ||
274 | |||
275 | return ret; | ||
276 | } | ||
277 | |||
278 | static const struct dev_pm_ops sii9234_pm_ops = { | ||
279 | .runtime_suspend = sii9234_runtime_suspend, | ||
280 | .runtime_resume = sii9234_runtime_resume, | ||
281 | }; | ||
282 | |||
283 | static int sii9234_s_power(struct v4l2_subdev *sd, int on) | ||
284 | { | ||
285 | struct sii9234_context *ctx = sd_to_context(sd); | ||
286 | int ret; | ||
287 | |||
288 | if (on) | ||
289 | ret = pm_runtime_get_sync(&ctx->client->dev); | ||
290 | else | ||
291 | ret = pm_runtime_put(&ctx->client->dev); | ||
292 | /* only values < 0 indicate errors */ | ||
293 | return IS_ERR_VALUE(ret) ? ret : 0; | ||
294 | } | ||
295 | |||
296 | static int sii9234_s_stream(struct v4l2_subdev *sd, int enable) | ||
297 | { | ||
298 | struct sii9234_context *ctx = sd_to_context(sd); | ||
299 | |||
300 | /* (dis/en)able TDMS output */ | ||
301 | sii9234_writeb_mask(ctx->client, 0x1a, enable ? 0 : ~0 , 1 << 4); | ||
302 | return 0; | ||
303 | } | ||
304 | |||
305 | static const struct v4l2_subdev_core_ops sii9234_core_ops = { | ||
306 | .s_power = sii9234_s_power, | ||
307 | }; | ||
308 | |||
309 | static const struct v4l2_subdev_video_ops sii9234_video_ops = { | ||
310 | .s_stream = sii9234_s_stream, | ||
311 | }; | ||
312 | |||
313 | static const struct v4l2_subdev_ops sii9234_ops = { | ||
314 | .core = &sii9234_core_ops, | ||
315 | .video = &sii9234_video_ops, | ||
316 | }; | ||
317 | |||
318 | static int __devinit sii9234_probe(struct i2c_client *client, | ||
319 | const struct i2c_device_id *id) | ||
320 | { | ||
321 | struct device *dev = &client->dev; | ||
322 | struct sii9234_platform_data *pdata = dev->platform_data; | ||
323 | struct sii9234_context *ctx; | ||
324 | int ret; | ||
325 | |||
326 | ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); | ||
327 | if (!ctx) { | ||
328 | dev_err(dev, "out of memory\n"); | ||
329 | ret = -ENOMEM; | ||
330 | goto fail; | ||
331 | } | ||
332 | ctx->client = client; | ||
333 | |||
334 | ctx->power = regulator_get(dev, "hdmi-en"); | ||
335 | if (IS_ERR(ctx->power)) { | ||
336 | dev_err(dev, "failed to acquire regulator hdmi-en\n"); | ||
337 | ret = PTR_ERR(ctx->power); | ||
338 | goto fail_ctx; | ||
339 | } | ||
340 | |||
341 | ctx->gpio_n_reset = pdata->gpio_n_reset; | ||
342 | ret = gpio_request(ctx->gpio_n_reset, "MHL_RST"); | ||
343 | if (ret) { | ||
344 | dev_err(dev, "failed to acquire MHL_RST gpio\n"); | ||
345 | goto fail_power; | ||
346 | } | ||
347 | |||
348 | v4l2_i2c_subdev_init(&ctx->sd, client, &sii9234_ops); | ||
349 | |||
350 | pm_runtime_enable(dev); | ||
351 | |||
352 | /* enable device */ | ||
353 | ret = pm_runtime_get_sync(dev); | ||
354 | if (ret) | ||
355 | goto fail_pm; | ||
356 | |||
357 | /* verify chip version */ | ||
358 | ret = sii9234_verify_version(client); | ||
359 | if (ret) | ||
360 | goto fail_pm_get; | ||
361 | |||
362 | /* stop processing */ | ||
363 | pm_runtime_put(dev); | ||
364 | |||
365 | dev_info(dev, "probe successful\n"); | ||
366 | |||
367 | return 0; | ||
368 | |||
369 | fail_pm_get: | ||
370 | pm_runtime_put_sync(dev); | ||
371 | |||
372 | fail_pm: | ||
373 | pm_runtime_disable(dev); | ||
374 | gpio_free(ctx->gpio_n_reset); | ||
375 | |||
376 | fail_power: | ||
377 | regulator_put(ctx->power); | ||
378 | |||
379 | fail_ctx: | ||
380 | kfree(ctx); | ||
381 | |||
382 | fail: | ||
383 | dev_err(dev, "probe failed\n"); | ||
384 | |||
385 | return ret; | ||
386 | } | ||
387 | |||
388 | static int __devexit sii9234_remove(struct i2c_client *client) | ||
389 | { | ||
390 | struct device *dev = &client->dev; | ||
391 | struct v4l2_subdev *sd = i2c_get_clientdata(client); | ||
392 | struct sii9234_context *ctx = sd_to_context(sd); | ||
393 | |||
394 | pm_runtime_disable(dev); | ||
395 | gpio_free(ctx->gpio_n_reset); | ||
396 | regulator_put(ctx->power); | ||
397 | kfree(ctx); | ||
398 | |||
399 | dev_info(dev, "remove successful\n"); | ||
400 | |||
401 | return 0; | ||
402 | } | ||
403 | |||
404 | |||
405 | static const struct i2c_device_id sii9234_id[] = { | ||
406 | { "SII9234", 0 }, | ||
407 | { }, | ||
408 | }; | ||
409 | |||
410 | MODULE_DEVICE_TABLE(i2c, sii9234_id); | ||
411 | static struct i2c_driver sii9234_driver = { | ||
412 | .driver = { | ||
413 | .name = "sii9234", | ||
414 | .owner = THIS_MODULE, | ||
415 | .pm = &sii9234_pm_ops, | ||
416 | }, | ||
417 | .probe = sii9234_probe, | ||
418 | .remove = __devexit_p(sii9234_remove), | ||
419 | .id_table = sii9234_id, | ||
420 | }; | ||
421 | |||
422 | static int __init sii9234_init(void) | ||
423 | { | ||
424 | return i2c_add_driver(&sii9234_driver); | ||
425 | } | ||
426 | module_init(sii9234_init); | ||
427 | |||
428 | static void __exit sii9234_exit(void) | ||
429 | { | ||
430 | i2c_del_driver(&sii9234_driver); | ||
431 | } | ||
432 | module_exit(sii9234_exit); | ||