V4L/DVB (12257): em28xx: make tuning work for Terratec Cinergy T XS USB (mt352 variant)

The Terratec Cinergy T XS USB can have either a zl10353 or an mt352.  Add
support for the MT352 variant.

Thanks to Jelle de Jong for providing a unit to test/debug with.

Cc: Jelle de Jong <jelledejong@powercraft.nl>
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 41 insertions, 6 deletions

diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index 3da97c32b8fa..d57f7583ac66 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -31,6 +31,8 @@
 #include "lgdt330x.h"
 #include "zl10353.h"
 #include "s5h1409.h"
+#include "mt352.h"
+#include "mt352_priv.h" /* FIXME */
 
 MODULE_DESCRIPTION("driver for em28xx based DVB cards");
 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
@@ -258,6 +260,41 @@ static struct drx397xD_config em28xx_drx397xD_with_xc3028 = {
 };
 #endif
 
+static int mt352_terratec_xs_init(struct dvb_frontend *fe)
+{
+        /* Values extracted from a USB trace of the Terratec Windows driver */
+        static u8 clock_config[]   = { CLOCK_CTL,  0x38, 0x2c };
+        static u8 reset[]          = { RESET,      0x80 };
+        static u8 adc_ctl_1_cfg[]  = { ADC_CTL_1,  0x40 };
+        static u8 agc_cfg[]        = { AGC_TARGET, 0x28, 0xa0 };
+        static u8 input_freq_cfg[] = { INPUT_FREQ_1, 0x31, 0xb8 };
+        static u8 rs_err_cfg[]     = { RS_ERR_PER_1, 0x00, 0x4d };
+        static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
+        static u8 trl_nom_cfg[]    = { TRL_NOMINAL_RATE_1, 0x64, 0x00 };
+        static u8 tps_given_cfg[]  = { TPS_GIVEN_1, 0x40, 0x80, 0x50 };
+        static u8 tuner_go[]       = { TUNER_GO, 0x5d};
+
+        mt352_write(fe, clock_config,   sizeof(clock_config));
+        udelay(200);
+        mt352_write(fe, reset,          sizeof(reset));
+        mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg));
+        mt352_write(fe, agc_cfg,        sizeof(agc_cfg));
+        mt352_write(fe, input_freq_cfg, sizeof(input_freq_cfg));
+        mt352_write(fe, rs_err_cfg,     sizeof(rs_err_cfg));
+        mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+        mt352_write(fe, trl_nom_cfg,    sizeof(trl_nom_cfg));
+        mt352_write(fe, tps_given_cfg,  sizeof(tps_given_cfg));
+        mt352_write(fe, tuner_go,       sizeof(tuner_go));
+        return 0;
+}
+
+static struct mt352_config terratec_xs_mt352_cfg = {
+        .demod_address = (0x1e >> 1),
+        .no_tuner = 1,
+        .if2 = 45600,
+        .demod_init = mt352_terratec_xs_init,
+};
+
 /* ------------------------------------------------------------------ */
 
 static int attach_xc3028(u8 addr, struct em28xx *dev)
@@ -458,13 +495,11 @@ static int dvb_init(struct em28xx *dev)
                 if (dvb->frontend == NULL) {
                         /* This board could have either a zl10353 or a mt352.
                            If the chip id isn't for zl10353, try mt352 */
-
-                        /* FIXME: make support for mt352 work */
-                        printk(KERN_ERR "version of this board with mt352 not "
-                               "currently supported\n");
-                        result = -EINVAL;
-                        goto out_free;
+                        dvb->frontend = dvb_attach(mt352_attach,
+                                                   &terratec_xs_mt352_cfg,
+                                                   &dev->i2c_adap);
                 }
+
                 if (attach_xc3028(0x61, dev) < 0) {
                         result = -EINVAL;
                         goto out_free;