V4L/DVB (4638): Basic DVB-T and analog TV support for the HVR1300.

This is the first in a series of patches to add full WinTV-HVR1300
support to Linux. This first patch will enable analog TV support
and DVB-T support. Later patches will add the hardware MPEG encoder
support.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

5 files changed, 76 insertions, 0 deletions

diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index 29ba5d53ce34..4a9998f4a618 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -1280,6 +1280,29 @@ struct cx88_board cx88_boards[] = {
                        .gpio3  = 0x02000000,
                }},
        },
+        [CX88_BOARD_HAUPPAUGE_HVR1300] = {
+                .name           = "Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder",
+                .tuner_type     = TUNER_PHILIPS_FMD1216ME_MK3,
+                .radio_type     = UNSET,
+                .tuner_addr     = ADDR_UNSET,
+                .radio_addr     = ADDR_UNSET,
+                .tda9887_conf   = TDA9887_PRESENT,
+                .input          = {{
+                        .type   = CX88_VMUX_TELEVISION,
+                        .vmux   = 0,
+                        .gpio0  = 0xe780,
+                },{
+                        .type   = CX88_VMUX_COMPOSITE1,
+                        .vmux   = 1,
+                        .gpio0  = 0xe780,
+                },{
+                        .type   = CX88_VMUX_SVIDEO,
+                        .vmux   = 2,
+                        .gpio0  = 0xe780,
+                }},
+                /* fixme: Add radio support */
+                .dvb            = 1,
+        },
 };
 const unsigned int cx88_bcount = ARRAY_SIZE(cx88_boards);
 
@@ -1542,6 +1565,18 @@ struct cx88_subid cx88_subids[] = {
                 .subvendor = 0xc180,
                 .subdevice = 0xc980,
                 .card      = CX88_BOARD_TE_DTV_250_OEM_SWANN,
+        },{
+                .subvendor = 0x0070,
+                .subdevice = 0x9600,
+                .card      = CX88_BOARD_HAUPPAUGE_HVR1300,
+        },{
+                .subvendor = 0x0070,
+                .subdevice = 0x9601,
+                .card      = CX88_BOARD_HAUPPAUGE_HVR1300,
+        },{
+                .subvendor = 0x0070,
+                .subdevice = 0x9602,
+                .card      = CX88_BOARD_HAUPPAUGE_HVR1300,
         },
 };
 const unsigned int cx88_idcount = ARRAY_SIZE(cx88_subids);
@@ -1597,6 +1632,11 @@ static void hauppauge_eeprom(struct cx88_core *core, u8 *eeprom_data)
         case 92000: /* Nova-SE2 (OEM, No Video or IR) */
         case 94009: /* WinTV-HVR1100 (Video and IR Retail) */
         case 94501: /* WinTV-HVR1100 (Video and IR OEM) */
+        case 96009: /* WinTV-HVR1300 (PAL Video, MPEG Video and IR RX) */
+        case 96019: /* WinTV-HVR1300 (PAL Video, MPEG Video and IR RX/TX) */
+        case 96559: /* WinTV-HVR1300 (PAL Video, MPEG Video no IR) */
+        case 96569: /* WinTV-HVR1300 () */
+        case 96659: /* WinTV-HVR1300 () */
         case 98559: /* WinTV-HVR1100LP (Video no IR, Retail - Low Profile) */
                 /* known */
                 break;
@@ -1723,6 +1763,22 @@ void cx88_card_list(struct cx88_core *core, struct pci_dev *pci)
                        core->name, i, cx88_boards[i].name);
 }
 
+void cx88_card_setup_pre_i2c(struct cx88_core *core)
+{
+        switch (core->board) {
+        case CX88_BOARD_HAUPPAUGE_HVR1300:
+                /* Bring the 702 demod up before i2c scanning/attach or devices are hidden */
+                /* We leave here with the 702 on the bus */
+                cx_write(MO_GP0_IO, 0x0000e780);
+                udelay(1000);
+                cx_clear(MO_GP0_IO, 0x00000080);
+                udelay(50);
+                cx_set(MO_GP0_IO, 0x00000080); /* 702 out of reset */
+                udelay(1000);
+                break;
+        }
+}
+
 void cx88_card_setup(struct cx88_core *core)
 {
         static u8 eeprom[256];
@@ -1752,6 +1808,7 @@ void cx88_card_setup(struct cx88_core *core)
         case CX88_BOARD_HAUPPAUGE_HVR1100:
         case CX88_BOARD_HAUPPAUGE_HVR1100LP:
         case CX88_BOARD_HAUPPAUGE_HVR3000:
+        case CX88_BOARD_HAUPPAUGE_HVR1300:
                 if (0 == core->i2c_rc)
                         hauppauge_eeprom(core,eeprom);
                 break;
diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index 888ccb671e6c..f379ede3049a 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -1133,6 +1133,7 @@ struct cx88_core* cx88_core_get(struct pci_dev *pci)
 
         /* init hardware */
         cx88_reset(core);
+        cx88_card_setup_pre_i2c(core);
         cx88_i2c_init(core,pci);
         cx88_call_i2c_clients (core, TUNER_SET_STANDBY, NULL);
         cx88_card_setup(core);
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index a5812e2e25c1..c87041dee21e 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -319,6 +319,10 @@ static struct cx22702_config hauppauge_hvr1100_config = {
         .demod_address = 0x63,
         .output_mode   = CX22702_SERIAL_OUTPUT,
 };
+static struct cx22702_config hauppauge_hvr1300_config = {
+        .demod_address = 0x63,
+        .output_mode   = CX22702_SERIAL_OUTPUT,
+};
 
 static int or51132_set_ts_param(struct dvb_frontend* fe,
                                 int is_punctured)
@@ -544,6 +548,16 @@ static int dvb_register(struct cx8802_dev *dev)
                                    &dvb_pll_fmd1216me);
                 }
                 break;
+        case CX88_BOARD_HAUPPAUGE_HVR1300:
+                dev->dvb.frontend = dvb_attach(cx22702_attach,
+                                               &hauppauge_hvr1300_config,
+                                               &dev->core->i2c_adap);
+                if (dev->dvb.frontend != NULL) {
+                        dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
+                                   &dev->core->i2c_adap,
+                                   &dvb_pll_fmd1216me);
+                }
+                break;
         case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS:
                 dev->dvb.frontend = dvb_attach(mt352_attach,
                                                &dvico_fusionhdtv,
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index 3049bd5b5a48..83ebf7a3c054 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -195,6 +195,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
         case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
         case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
         case CX88_BOARD_HAUPPAUGE_HVR1100:
+        case CX88_BOARD_HAUPPAUGE_HVR1300:
                 ir_codes = ir_codes_hauppauge_new;
                 ir_type = IR_TYPE_RC5;
                 ir->sampling = 1;
@@ -417,6 +418,7 @@ void cx88_ir_irq(struct cx88_core *core)
         case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
         case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
         case CX88_BOARD_HAUPPAUGE_HVR1100:
+        case CX88_BOARD_HAUPPAUGE_HVR1300:
                 ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7);
                 ir_dprintk("biphase decoded: %x\n", ircode);
                 if ((ircode & 0xfffff000) != 0x3000)
diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
index 1c87c2ed216c..89f12e273b7f 100644
--- a/drivers/media/video/cx88/cx88.h
+++ b/drivers/media/video/cx88/cx88.h
@@ -200,6 +200,7 @@ extern struct sram_channel cx88_sram_channels[];
 #define CX88_BOARD_HAUPPAUGE_HVR3000       53
 #define CX88_BOARD_NORWOOD_MICRO           54
 #define CX88_BOARD_TE_DTV_250_OEM_SWANN    55
+#define CX88_BOARD_HAUPPAUGE_HVR1300       56
 
 enum cx88_itype {
         CX88_VMUX_COMPOSITE1 = 1,
@@ -548,6 +549,7 @@ extern const unsigned int cx88_idcount;
 
 extern void cx88_card_list(struct cx88_core *core, struct pci_dev *pci);
 extern void cx88_card_setup(struct cx88_core *core);
+extern void cx88_card_setup_pre_i2c(struct cx88_core *core);
 
 /* ----------------------------------------------------------- */
 /* cx88-tvaudio.c                                              */