V4L/DVB (5147): Make vivi driver to use vmalloced pointers

Before this patch, vivi were simulating a scatter gather DMA transfer.
While this is academic, showing how stuff really works on a real PCI 
device, this means a non-optimized code. 
There are only two memory models that vivi implements:
	1) kernel alloced memory. This is also used by read() method.
	   On this case, a vmalloc32 buffer is allocated at kernel;
	2) userspace allocated memory. This is used by most userspace apps.
	   video-buf will store this pointer.
	   a simple copy_to_user is enough to transfer data.
The third memory model scenario supported by video-buf is overlay mode. 
This model is not implemented on vivi and unlikely to be implemented on 
newer drivers, since now, most userspace apps do some post-processing 
(like de-interlacing).
After this patch, some cleanups may be done at video-buf.c to avoid 
allocating pages, when the driver doesn't need a PCI buffer. This is the 
case of vivi and usb drivers.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

2 files changed, 75 insertions, 11 deletions

diff --git a/drivers/media/video/video-buf.c b/drivers/media/video/video-buf.c
index 6504a5866849..459786ff459a 100644
--- a/drivers/media/video/video-buf.c
+++ b/drivers/media/video/video-buf.c
@@ -148,6 +148,8 @@ int videobuf_dma_init_user(struct videobuf_dmabuf *dma, int direction,
         dprintk(1,"init user [0x%lx+0x%lx => %d pages]\n",
                 data,size,dma->nr_pages);
 
+        dma->varea = (void *) data;
+
         down_read(&current->mm->mmap_sem);
         err = get_user_pages(current,current->mm,
                              data & PAGE_MASK, dma->nr_pages,
@@ -285,6 +287,7 @@ int videobuf_dma_free(struct videobuf_dmabuf *dma)
 
         vfree(dma->vmalloc);
         dma->vmalloc = NULL;
+        dma->varea = NULL;
 
         if (dma->bus_addr) {
                 dma->bus_addr = 0;
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 178441922738..0fb6d520d1d0 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -145,7 +145,9 @@ struct vivi_buffer {
 
         struct vivi_fmt        *fmt;
 
+#ifdef CONFIG_VIVI_SCATTER
         struct sg_to_addr      *to_addr;
+#endif
 };
 
 struct vivi_dmaqueue {
@@ -230,6 +232,7 @@ static u8 bars[8][3] = {
 #define TSTAMP_MAX_Y TSTAMP_MIN_Y+15
 #define TSTAMP_MIN_X 64
 
+#ifdef CONFIG_VIVI_SCATTER
 static void prep_to_addr(struct sg_to_addr to_addr[],
                          struct videobuf_buffer *vb)
 {
@@ -262,14 +265,24 @@ static int get_addr_pos(int pos, int pages, struct sg_to_addr to_addr[])
 
         return (p1);
 }
+#endif
 
+#ifdef CONFIG_VIVI_SCATTER
 static void gen_line(struct sg_to_addr to_addr[],int inipos,int pages,int wmax,
                      int hmax, int line, char *timestr)
+#else
+static void gen_line(char *basep,int inipos,int wmax,
+                     int hmax, int line, char *timestr)
+#endif
 {
-        int  w,i,j,pos=inipos,pgpos,oldpg,y;
-        char *p,*s,*basep;
-        struct page *pg;
+        int  w,i,j,pos=inipos,y;
+        char *p,*s;
         u8   chr,r,g,b,color;
+#ifdef CONFIG_VIVI_SCATTER
+        int pgpos,oldpg;
+        char *basep;
+        struct page *pg;
+
         unsigned long flags;
         spinlock_t spinlock;
 
@@ -280,6 +293,7 @@ static void gen_line(struct sg_to_addr to_addr[],int inipos,int pages,int wmax,
         pg=pfn_to_page(sg_dma_address(to_addr[oldpg].sg) >> PAGE_SHIFT);
         spin_lock_irqsave(&spinlock,flags);
         basep = kmap_atomic(pg, KM_BOUNCE_READ)+to_addr[oldpg].sg->offset;
+#endif
 
         /* We will just duplicate the second pixel at the packet */
         wmax/=2;
@@ -291,6 +305,7 @@ static void gen_line(struct sg_to_addr to_addr[],int inipos,int pages,int wmax,
                 b=bars[w*7/wmax][2];
 
                 for (color=0;color<4;color++) {
+#ifdef CONFIG_VIVI_SCATTER
                         pgpos=get_addr_pos(pos,pages,to_addr);
                         if (pgpos!=oldpg) {
                                 pg=pfn_to_page(sg_dma_address(to_addr[pgpos].sg) >> PAGE_SHIFT);
@@ -299,6 +314,9 @@ static void gen_line(struct sg_to_addr to_addr[],int inipos,int pages,int wmax,
                                 oldpg=pgpos;
                         }
                         p=basep+pos-to_addr[pgpos].pos;
+#else
+                        p=basep+pos;
+#endif
 
                         switch (color) {
                                 case 0:
@@ -343,6 +361,7 @@ static void gen_line(struct sg_to_addr to_addr[],int inipos,int pages,int wmax,
 
                                 pos=inipos+j*2;
                                 for (color=0;color<4;color++) {
+#ifdef CONFIG_VIVI_SCATTER
                                         pgpos=get_addr_pos(pos,pages,to_addr);
                                         if (pgpos!=oldpg) {
                                                 pg=pfn_to_page(sg_dma_address(
@@ -356,6 +375,9 @@ static void gen_line(struct sg_to_addr to_addr[],int inipos,int pages,int wmax,
                                                 oldpg=pgpos;
                                         }
                                         p=basep+pos-to_addr[pgpos].pos;
+#else
+                                        p=basep+pos;
+#endif
 
                                         y=TO_Y(r,g,b);
 
@@ -380,19 +402,27 @@ static void gen_line(struct sg_to_addr to_addr[],int inipos,int pages,int wmax,
 
 
 end:
+#ifdef CONFIG_VIVI_SCATTER
         kunmap_atomic(basep, KM_BOUNCE_READ);
         spin_unlock_irqrestore(&spinlock,flags);
-
+#else
+        return;
+#endif
 }
 static void vivi_fillbuff(struct vivi_dev *dev,struct vivi_buffer *buf)
 {
         int h,pos=0;
         int hmax  = buf->vb.height;
         int wmax  = buf->vb.width;
-        struct videobuf_buffer *vb=&buf->vb;
-        struct sg_to_addr *to_addr=buf->to_addr;
         struct timeval ts;
+#ifdef CONFIG_VIVI_SCATTER
+        struct sg_to_addr *to_addr=buf->to_addr;
+        struct videobuf_buffer *vb=&buf->vb;
+#else
+        char *tmpbuf;
+#endif
 
+#ifdef CONFIG_VIVI_SCATTER
         /* Test if DMA mapping is ready */
         if (!sg_dma_address(&vb->dma.sglist[0]))
                 return;
@@ -401,9 +431,27 @@ static void vivi_fillbuff(struct vivi_dev *dev,struct vivi_buffer *buf)
 
         /* Check if there is enough memory */
         BUG_ON(buf->vb.dma.nr_pages << PAGE_SHIFT < (buf->vb.width*buf->vb.height)*2);
+#else
+        if (buf->vb.dma.varea) {
+                tmpbuf=kmalloc (wmax*2, GFP_KERNEL);
+        } else {
+                tmpbuf=buf->vb.dma.vmalloc;
+        }
+
+#endif
 
         for (h=0;h<hmax;h++) {
+#ifdef CONFIG_VIVI_SCATTER
                 gen_line(to_addr,pos,vb->dma.nr_pages,wmax,hmax,h,dev->timestr);
+#else
+                if (buf->vb.dma.varea) {
+                        gen_line(tmpbuf,0,wmax,hmax,h,dev->timestr);
+                        /* FIXME: replacing to __copy_to_user */
+                        copy_to_user(buf->vb.dma.varea+pos,tmpbuf,wmax*2);
+                } else {
+                        gen_line(tmpbuf,pos,wmax,hmax,h,dev->timestr);
+                }
+#endif
                 pos += wmax*2;
         }
 
@@ -429,7 +477,7 @@ static void vivi_fillbuff(struct vivi_dev *dev,struct vivi_buffer *buf)
                         dev->h,dev->m,dev->s,(dev->us+500)/1000);
 
         dprintk(2,"vivifill at %s: Buffer 0x%08lx size= %d\n",dev->timestr,
-                        (unsigned long)buf->vb.dma.vmalloc,pos);
+                        (unsigned long)buf->vb.dma.varea,pos);
 
         /* Advice that buffer was filled */
         buf->vb.state = STATE_DONE;
@@ -668,9 +716,11 @@ static void free_buffer(struct videobuf_queue *vq, struct vivi_buffer *buf)
         if (in_interrupt())
                 BUG();
 
+#ifdef CONFIG_VIVI_SCATTER
         /*FIXME: Maybe a spinlock is required here */
         kfree(buf->to_addr);
         buf->to_addr=NULL;
+#endif
 
         videobuf_waiton(&buf->vb,0,0);
         videobuf_dma_unmap(vq, &buf->vb.dma);
@@ -716,11 +766,12 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
 
         buf->vb.state = STATE_PREPARED;
 
+#ifdef CONFIG_VIVI_SCATTER
         if (NULL == (buf->to_addr = kmalloc(sizeof(*buf->to_addr) * vb->dma.nr_pages,GFP_KERNEL))) {
                 rc=-ENOMEM;
                 goto fail;
         }
-
+#endif
         return 0;
 
 fail:
@@ -785,6 +836,7 @@ static void buffer_release(struct videobuf_queue *vq, struct videobuf_buffer *vb
         free_buffer(vq,buf);
 }
 
+#ifdef CONFIG_VIVI_SCATTER
 static int vivi_map_sg(void *dev, struct scatterlist *sg, int nents,
                        int direction)
 {
@@ -817,6 +869,7 @@ static int vivi_dma_sync_sg(void *dev,struct scatterlist *sglist, int nr_pages,
 //      flush_write_buffers();
         return 0;
 }
+#endif
 
 static struct videobuf_queue_ops vivi_video_qops = {
         .buf_setup      = buffer_setup,
@@ -825,9 +878,9 @@ static struct videobuf_queue_ops vivi_video_qops = {
         .buf_release    = buffer_release,
 
         /* Non-pci handling routines */
-        .vb_map_sg      = vivi_map_sg,
-        .vb_dma_sync_sg = vivi_dma_sync_sg,
-        .vb_unmap_sg    = vivi_unmap_sg,
+//      .vb_map_sg      = vivi_map_sg,
+//      .vb_dma_sync_sg = vivi_dma_sync_sg,
+//      .vb_unmap_sg    = vivi_unmap_sg,
 };
 
 /* ------------------------------------------------------------------
@@ -1205,11 +1258,19 @@ static int vivi_open(struct inode *inode, struct file *file)
         sprintf(dev->timestr,"%02d:%02d:%02d:%03d",
                         dev->h,dev->m,dev->s,(dev->us+500)/1000);
 
+#ifdef CONFIG_VIVI_SCATTER
+        videobuf_queue_init(&fh->vb_vidq,VIDEOBUF_DMA_SCATTER, &vivi_video_qops,
+                        NULL, NULL,
+                        fh->type,
+                        V4L2_FIELD_INTERLACED,
+                        sizeof(struct vivi_buffer),fh);
+#else
         videobuf_queue_init(&fh->vb_vidq, &vivi_video_qops,
                         NULL, NULL,
                         fh->type,
                         V4L2_FIELD_INTERLACED,
                         sizeof(struct vivi_buffer),fh);
+#endif
 
         return 0;
 }