V4L/DVB (11880): cx23885: support for card Mygica X8506 DMB-TH

This patch add cx23885 support for card "Mygica X8506 DMB-TH".
It should work on "Magic-Pro ProHDTV Extreme" as well, as they are
same hardware with different branding.

Sign-off-by: David T.L. Wong <davidtlwong@gmail.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

3 files changed, 57 insertions, 1 deletions

diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 057ef36d5a63..ce29b5e34a11 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -197,6 +197,10 @@ struct cx23885_board cx23885_boards[] = {
                 .name           = "Hauppauge WinTV-HVR1210",
                 .portc          = CX23885_MPEG_DVB,
         },
+        [CX23885_BOARD_MYGICA_X8506] = {
+                .name           = "Mygica X8506 DMB-TH",
+                .portb          = CX23885_MPEG_DVB,
+        },
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 
@@ -316,6 +320,10 @@ struct cx23885_subid cx23885_subids[] = {
                 .subvendor = 0x0070,
                 .subdevice = 0x2295,
                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
+        }, {
+                .subvendor = 0x14f1,
+                .subdevice = 0x8651,
+                .card      = CX23885_BOARD_MYGICA_X8506,
         },
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -706,6 +714,15 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
                 mdelay(20);
                 cx23885_gpio_set(dev, GPIO_9);
                 break;
+        case CX23885_BOARD_MYGICA_X8506:
+                /* GPIO-1 reset XC5000 */
+                /* GPIO-2 reset LGS8GL5 */
+                cx_set(GP0_IO, 0x00060000);
+                cx_clear(GP0_IO, 0x00000006);
+                mdelay(100);
+                cx_set(GP0_IO, 0x00060006);
+                mdelay(100);
+                break;
         }
 }
 
@@ -809,6 +826,11 @@ void cx23885_card_setup(struct cx23885_dev *dev)
                 ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
                 ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
                 break;
+        case CX23885_BOARD_MYGICA_X8506:
+                ts1->gen_ctrl_val  = 0x5; /* Parallel */
+                ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+                ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+                break;
         case CX23885_BOARD_HAUPPAUGE_HVR1250:
         case CX23885_BOARD_HAUPPAUGE_HVR1500:
         case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 45784a384300..e236df23370e 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -49,6 +49,7 @@
 #include "lnbh24.h"
 #include "cx24116.h"
 #include "cimax2.h"
+#include "lgs8gxx.h"
 #include "netup-eeprom.h"
 #include "netup-init.h"
 #include "lgdt3305.h"
@@ -420,10 +421,29 @@ static struct cx24116_config dvbworld_cx24116_config = {
         .demod_address = 0x05,
 };
 
+static struct lgs8gxx_config mygica_x8506_lgs8gl5_config = {
+        .prod = LGS8GXX_PROD_LGS8GL5,
+        .demod_address = 0x19,
+        .serial_ts = 0,
+        .ts_clk_pol = 1,
+        .ts_clk_gated = 1,
+        .if_clk_freq = 30400, /* 30.4 MHz */
+        .if_freq = 5380, /* 5.38 MHz */
+        .if_neg_center = 1,
+        .ext_adc = 0,
+        .adc_signed = 0,
+        .if_neg_edge = 0,
+};
+
+static struct xc5000_config mygica_x8506_xc5000_config = {
+        .i2c_address = 0x61,
+        .if_khz = 5380,
+};
+
 static int dvb_register(struct cx23885_tsport *port)
 {
         struct cx23885_dev *dev = port->dev;
-        struct cx23885_i2c *i2c_bus = NULL;
+        struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL;
         struct videobuf_dvb_frontend *fe0;
         int ret;
 
@@ -745,6 +765,19 @@ static int dvb_register(struct cx23885_tsport *port)
                         break;
                 }
                 break;
+        case CX23885_BOARD_MYGICA_X8506:
+                i2c_bus = &dev->i2c_bus[0];
+                i2c_bus2 = &dev->i2c_bus[1];
+                fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
+                        &mygica_x8506_lgs8gl5_config,
+                        &i2c_bus->i2c_adap);
+                if (fe0->dvb.frontend != NULL) {
+                        dvb_attach(xc5000_attach,
+                                fe0->dvb.frontend,
+                                &i2c_bus2->i2c_adap,
+                                &mygica_x8506_xc5000_config);
+                }
+                break;
         default:
                 printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
                         " isn't supported yet\n",
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index 5067c19b6594..1a2ac518a3f1 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -75,6 +75,7 @@
 #define CX23885_BOARD_HAUPPAUGE_HVR1275        19
 #define CX23885_BOARD_HAUPPAUGE_HVR1255        20
 #define CX23885_BOARD_HAUPPAUGE_HVR1210        21
+#define CX23885_BOARD_MYGICA_X8506             22
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002