[media] rename drivers/media/IR to drives/media/rc

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 167 insertions, 0 deletions

diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
new file mode 100644
index 000000000000..d05003d0995f
--- /dev/null
+++ b/drivers/media/rc/Kconfig
@@ -0,0 +1,167 @@
+menuconfig IR_CORE
+        tristate "Infrared remote controller adapters"
+        depends on INPUT
+        default INPUT
+        ---help---
+          Enable support for Remote Controllers on Linux. This is
+          needed in order to support several video capture adapters.
+
+          Enable this option if you have a video capture board even
+          if you don't need IR, as otherwise, you may not be able to
+          compile the driver for your adapter.
+
+config IR_LEGACY
+        tristate
+        depends on IR_CORE
+        default IR_CORE
+
+if IR_CORE
+
+config LIRC
+        tristate
+        default y
+
+        ---help---
+           Enable this option to build the Linux Infrared Remote
+           Control (LIRC) core device interface driver. The LIRC
+           interface passes raw IR to and from userspace, where the
+           LIRC daemon handles protocol decoding for IR reception and
+           encoding for IR transmitting (aka "blasting").
+
+source "drivers/media/rc/keymaps/Kconfig"
+
+config IR_NEC_DECODER
+        tristate "Enable IR raw decoder for the NEC protocol"
+        depends on IR_CORE
+        select BITREVERSE
+        default y
+
+        ---help---
+           Enable this option if you have IR with NEC protocol, and
+           if the IR is decoded in software
+
+config IR_RC5_DECODER
+        tristate "Enable IR raw decoder for the RC-5 protocol"
+        depends on IR_CORE
+        select BITREVERSE
+        default y
+
+        ---help---
+           Enable this option if you have IR with RC-5 protocol, and
+           if the IR is decoded in software
+
+config IR_RC6_DECODER
+        tristate "Enable IR raw decoder for the RC6 protocol"
+        depends on IR_CORE
+        select BITREVERSE
+        default y
+
+        ---help---
+           Enable this option if you have an infrared remote control which
+           uses the RC6 protocol, and you need software decoding support.
+
+config IR_JVC_DECODER
+        tristate "Enable IR raw decoder for the JVC protocol"
+        depends on IR_CORE
+        select BITREVERSE
+        default y
+
+        ---help---
+           Enable this option if you have an infrared remote control which
+           uses the JVC protocol, and you need software decoding support.
+
+config IR_SONY_DECODER
+        tristate "Enable IR raw decoder for the Sony protocol"
+        depends on IR_CORE
+        default y
+
+        ---help---
+           Enable this option if you have an infrared remote control which
+           uses the Sony protocol, and you need software decoding support.
+
+config IR_RC5_SZ_DECODER
+        tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol"
+        depends on IR_CORE
+        select BITREVERSE
+        default y
+
+        ---help---
+           Enable this option if you have IR with RC-5 (streamzap) protocol,
+           and if the IR is decoded in software. (The Streamzap PC Remote
+           uses an IR protocol that is almost standard RC-5, but not quite,
+           as it uses an additional bit).
+
+config IR_LIRC_CODEC
+        tristate "Enable IR to LIRC bridge"
+        depends on IR_CORE
+        depends on LIRC
+        default y
+
+        ---help---
+           Enable this option to pass raw IR to and from userspace via
+           the LIRC interface.
+
+config IR_ENE
+        tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
+        depends on PNP
+        depends on IR_CORE
+        ---help---
+           Say Y here to enable support for integrated infrared receiver
+           /transceiver made by ENE.
+
+           You can see if you have it by looking at lspnp output.
+           Output should include ENE0100 ENE0200 or something similar.
+
+           To compile this driver as a module, choose M here: the
+           module will be called ene_ir.
+
+config IR_IMON
+        tristate "SoundGraph iMON Receiver and Display"
+        depends on USB_ARCH_HAS_HCD
+        depends on IR_CORE
+        select USB
+        ---help---
+           Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
+           IR Receiver and/or LCD/VFD/VGA display.
+
+           To compile this driver as a module, choose M here: the
+           module will be called imon.
+
+config IR_MCEUSB
+        tristate "Windows Media Center Ed. eHome Infrared Transceiver"
+        depends on USB_ARCH_HAS_HCD
+        depends on IR_CORE
+        select USB
+        ---help---
+           Say Y here if you want to use a Windows Media Center Edition
+           eHome Infrared Transceiver.
+
+           To compile this driver as a module, choose M here: the
+           module will be called mceusb.
+
+config IR_NUVOTON
+        tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
+        depends on PNP
+        depends on IR_CORE
+        ---help---
+           Say Y here to enable support for integrated infrared receiver
+           /transciever made by Nuvoton (formerly Winbond). This chip is
+           found in the ASRock ION 330HT, as well as assorted Intel
+           DP55-series motherboards (and of course, possibly others).
+
+           To compile this driver as a module, choose M here: the
+           module will be called nuvoton-cir.
+
+config IR_STREAMZAP
+        tristate "Streamzap PC Remote IR Receiver"
+        depends on USB_ARCH_HAS_HCD
+        depends on IR_CORE
+        select USB
+        ---help---
+           Say Y here if you want to use a Streamzap PC Remote
+           Infrared Receiver.
+
+           To compile this driver as a module, choose M here: the
+           module will be called streamzap.
+
+endif #IR_CORE