[PATCH] v4l: LGDT3302 read status fix

- Fix bug in lgdt3302_read_status to return correct
  FE_HAS_SIGNAL and FS_HAS_CARRIER status.
- Removed #if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,10).

Signed-off-by: Mac Michaels <wmichaels1@earthlink.net>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 18 insertions, 25 deletions

diff --git a/drivers/media/dvb/frontends/lgdt3302.c b/drivers/media/dvb/frontends/lgdt3302.c
index d0b91219cf6e..09c914256e49 100644
--- a/drivers/media/dvb/frontends/lgdt3302.c
+++ b/drivers/media/dvb/frontends/lgdt3302.c
@@ -1,5 +1,5 @@
 /*
- * $Id: lgdt3302.c,v 1.2 2005/06/28 23:50:48 mkrufky Exp $
+ * $Id: lgdt3302.c,v 1.5 2005/07/07 03:47:15 mkrufky Exp $
  *
  *    Support for LGDT3302 (DViCO FustionHDTV 3 Gold) - VSB/QAM
  *
@@ -34,7 +34,6 @@
  *
  */
 
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -208,8 +207,6 @@ static int lgdt3302_set_parameters(struct dvb_frontend* fe,
         struct lgdt3302_state* state =
                 (struct lgdt3302_state*) fe->demodulator_priv;
 
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,10)
-
         /* Use 50MHz parameter values from spec sheet since xtal is 50 */
         static u8 top_ctrl_cfg[]   = { TOP_CONTROL, 0x03 };
         static u8 vsb_freq_cfg[]   = { VSB_CARRIER_FREQ0, 0x00, 0x87, 0x8e, 0x01 };
@@ -301,9 +298,6 @@ static int lgdt3302_set_parameters(struct dvb_frontend* fe,
                 lgdt3302_SwReset(state);
                 state->current_modulation = param->u.vsb.modulation;
         }
-#else
-        printk("lgdt3302: %s: you need a newer kernel for this, sorry\n",__FUNCTION__);
-#endif
 
         /* Change only if we are actually changing the channel */
         if (state->current_frequency != param->frequency) {
@@ -352,11 +346,28 @@ static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status)
          * This is done in SwReset();
          */
 
+        /* AGC status register */
+        i2c_selectreadbytes(state, AGC_STATUS, buf, 1);
+        dprintk("%s: AGC_STATUS = 0x%02x\n", __FUNCTION__, buf[0]);
+        if ((buf[0] & 0x0c) == 0x8){
+                /* Test signal does not exist flag */
+                /* as well as the AGC lock flag.   */
+                *status |= FE_HAS_SIGNAL;
+        } else {
+                /* Without a signal all other status bits are meaningless */
+                return 0;
+        }
+
         /* signal status */
         i2c_selectreadbytes(state, TOP_CONTROL, buf, sizeof(buf));
         dprintk("%s: TOP_CONTROL = 0x%02x, IRO_MASK = 0x%02x, IRQ_STATUS = 0x%02x\n", __FUNCTION__, buf[0], buf[1], buf[2]);
+
+#if 0
+        /* Alternative method to check for a signal */
+        /* using the SNR good/bad interrupts.   */
         if ((buf[2] & 0x30) == 0x10)
                 *status |= FE_HAS_SIGNAL;
+#endif
 
         /* sync status */
         if ((buf[2] & 0x03) == 0x01) {
@@ -369,17 +380,6 @@ static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status)
                 *status |= FE_HAS_VITERBI;
         }
 
-#if 0
-        /* Alternative method to check for a signal */
-        /* AGC status register */
-        i2c_selectreadbytes(state, AGC_STATUS, buf, 1);
-        dprintk("%s: AGC_STATUS = 0x%02x\n", __FUNCTION__, buf[0]);
-        if ((buf[0] & 0x0c) == 0x80) /* Test signal does not exist flag */
-                /* Test AGC lock flag */
-                *status |= FE_HAS_SIGNAL;
-        else
-                return 0;
-
         /* Carrier Recovery Lock Status Register */
         i2c_selectreadbytes(state, CARRIER_LOCK, buf, 1);
         dprintk("%s: CARRIER_LOCK = 0x%02x\n", __FUNCTION__, buf[0]);
@@ -389,21 +389,14 @@ static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status)
                 /* Need to undestand why there are 3 lock levels here */
                 if ((buf[0] & 0x07) == 0x07)
                         *status |= FE_HAS_CARRIER;
-                else
-                        return 0;
                 break;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,10)
         case VSB_8:
                 if ((buf[0] & 0x80) == 0x80)
                         *status |= FE_HAS_CARRIER;
-                else
-                        return 0;
                 break;
-#endif
         default:
                 printk("KERN_WARNING lgdt3302: %s: Modulation set to unsupported value\n", __FUNCTION__);
         }
-#endif
 
         return 0;
 }