V4L/DVB (3795): Fix for CX24123 & low symbol rates

- fixed the reception of channels with low symbol rates.
  ( The VGA1 and VGA2 offsets recommended by cx24109 docs for
  symbol rates from 1 to 5 MSps do not work. I changed them
  to values found experimentally. The charge pump current
  and FILTUNE voltage are now set to values recommended in
  the docs. This improves reception for symbol rates < 15 MSps.
  The values written in the SYSSymbolRate registers are calculated
  with better precision. )
		     
- fixed the cx24123_get_fec() function. It was returning the values
  for DCII mode.
- removed some unused variables

Signed-off-by: Vadim Catana <skystar at moldova.cc>
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

1 files changed, 181 insertions, 81 deletions

diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c
index d661c6f9cbe5..e430e6a50831 100644
--- a/drivers/media/dvb/frontends/cx24123.c
+++ b/drivers/media/dvb/frontends/cx24123.c
@@ -29,6 +29,8 @@
 #include "dvb_frontend.h"
 #include "cx24123.h"
 
+#define XTAL 10111000
+
 static int debug;
 #define dprintk(args...) \
         do { \
@@ -52,6 +54,7 @@ struct cx24123_state
         u32 VGAarg;
         u32 bandselectarg;
         u32 pllarg;
+        u32 FILTune;
 
         /* The Demod/Tuner can't easily provide these, we cache them */
         u32 currentfreq;
@@ -63,43 +66,33 @@ static struct
 {
         u32 symbolrate_low;
         u32 symbolrate_high;
-        u32 VCAslope;
-        u32 VCAoffset;
-        u32 VGA1offset;
-        u32 VGA2offset;
         u32 VCAprogdata;
         u32 VGAprogdata;
+        u32 FILTune;
 } cx24123_AGC_vals[] =
 {
         {
                 .symbolrate_low         = 1000000,
                 .symbolrate_high        = 4999999,
-                .VCAslope               = 0x07,
-                .VCAoffset              = 0x0f,
-                .VGA1offset             = 0x1f8,
-                .VGA2offset             = 0x1f8,
-                .VGAprogdata            = (2 << 18) | (0x1f8 << 9) | 0x1f8,
+                /* the specs recommend other values for VGA offsets,
+                   but tests show they are wrong */
+                .VGAprogdata            = (2 << 18) | (0x180 << 9) | 0x1e0,
                 .VCAprogdata            = (4 << 18) | (0x07 << 9) | 0x07,
+                .FILTune                = 0x280 /* 0.41 V */
         },
         {
                 .symbolrate_low         =  5000000,
                 .symbolrate_high        = 14999999,
-                .VCAslope               = 0x1f,
-                .VCAoffset              = 0x1f,
-                .VGA1offset             = 0x1e0,
-                .VGA2offset             = 0x180,
                 .VGAprogdata            = (2 << 18) | (0x180 << 9) | 0x1e0,
                 .VCAprogdata            = (4 << 18) | (0x07 << 9) | 0x1f,
+                .FILTune                = 0x317 /* 0.90 V */
         },
         {
                 .symbolrate_low         = 15000000,
                 .symbolrate_high        = 45000000,
-                .VCAslope               = 0x3f,
-                .VCAoffset              = 0x3f,
-                .VGA1offset             = 0x180,
-                .VGA2offset             = 0x100,
                 .VGAprogdata            = (2 << 18) | (0x100 << 9) | 0x180,
                 .VCAprogdata            = (4 << 18) | (0x07 << 9) | 0x3f,
+                .FILTune                = 0x146 /* 2.70 V */
         },
 };
 
@@ -112,90 +105,68 @@ static struct
 {
         u32 freq_low;
         u32 freq_high;
-        u32 bandselect;
         u32 VCOdivider;
-        u32 VCOnumber;
         u32 progdata;
 } cx24123_bandselect_vals[] =
 {
         {
                 .freq_low       = 950000,
                 .freq_high      = 1018999,
-                .bandselect     = 0x40,
                 .VCOdivider     = 4,
-                .VCOnumber      = 7,
                 .progdata       = (0 << 18) | (0 << 9) | 0x40,
         },
         {
                 .freq_low       = 1019000,
                 .freq_high      = 1074999,
-                .bandselect     = 0x80,
                 .VCOdivider     = 4,
-                .VCOnumber      = 8,
                 .progdata       = (0 << 18) | (0 << 9) | 0x80,
         },
         {
                 .freq_low       = 1075000,
                 .freq_high      = 1227999,
-                .bandselect     = 0x01,
                 .VCOdivider     = 2,
-                .VCOnumber      = 1,
                 .progdata       = (0 << 18) | (1 << 9) | 0x01,
         },
         {
                 .freq_low       = 1228000,
                 .freq_high      = 1349999,
-                .bandselect     = 0x02,
                 .VCOdivider     = 2,
-                .VCOnumber      = 2,
                 .progdata       = (0 << 18) | (1 << 9) | 0x02,
         },
         {
                 .freq_low       = 1350000,
                 .freq_high      = 1481999,
-                .bandselect     = 0x04,
                 .VCOdivider     = 2,
-                .VCOnumber      = 3,
                 .progdata       = (0 << 18) | (1 << 9) | 0x04,
         },
         {
                 .freq_low       = 1482000,
                 .freq_high      = 1595999,
-                .bandselect     = 0x08,
                 .VCOdivider     = 2,
-                .VCOnumber      = 4,
                 .progdata       = (0 << 18) | (1 << 9) | 0x08,
         },
         {
                 .freq_low       = 1596000,
                 .freq_high      = 1717999,
-                .bandselect     = 0x10,
                 .VCOdivider     = 2,
-                .VCOnumber      = 5,
                 .progdata       = (0 << 18) | (1 << 9) | 0x10,
         },
         {
                 .freq_low       = 1718000,
                 .freq_high      = 1855999,
-                .bandselect     = 0x20,
                 .VCOdivider     = 2,
-                .VCOnumber      = 6,
                 .progdata       = (0 << 18) | (1 << 9) | 0x20,
         },
         {
                 .freq_low       = 1856000,
                 .freq_high      = 2035999,
-                .bandselect     = 0x40,
                 .VCOdivider     = 2,
-                .VCOnumber      = 7,
                 .progdata       = (0 << 18) | (1 << 9) | 0x40,
         },
         {
                 .freq_low       = 2036000,
                 .freq_high      = 2149999,
-                .bandselect     = 0x80,
                 .VCOdivider     = 2,
-                .VCOnumber      = 8,
                 .progdata       = (0 << 18) | (1 << 9) | 0x80,
         },
 };
@@ -207,7 +178,6 @@ static struct {
 {
         {0x00, 0x03}, /* Reset system */
         {0x00, 0x00}, /* Clear reset */
-        {0x01, 0x3b}, /* Apply sensible defaults, from an i2c sniffer */
         {0x03, 0x07},
         {0x04, 0x10},
         {0x05, 0x04},
@@ -217,7 +187,6 @@ static struct {
         {0x0f, 0xfe},
         {0x10, 0x01},
         {0x14, 0x01},
-        {0x15, 0x98},
         {0x16, 0x00},
         {0x17, 0x01},
         {0x1b, 0x05},
@@ -226,8 +195,6 @@ static struct {
         {0x1e, 0x00},
         {0x20, 0x41},
         {0x21, 0x15},
-        {0x27, 0x14},
-        {0x28, 0x46},
         {0x29, 0x00},
         {0x2a, 0xb0},
         {0x2b, 0x73},
@@ -375,55 +342,103 @@ static int cx24123_set_fec(struct cx24123_state* state, fe_code_rate_t fec)
 static int cx24123_get_fec(struct cx24123_state* state, fe_code_rate_t *fec)
 {
         int ret;
-        u8 val;
 
         ret = cx24123_readreg (state, 0x1b);
         if (ret < 0)
                 return ret;
-        val = ret & 0x07;
-        switch (val) {
+        ret = ret & 0x07;
+
+        switch (ret) {
         case 1:
                 *fec = FEC_1_2;
                 break;
-        case 3:
+        case 2:
                 *fec = FEC_2_3;
                 break;
-        case 4:
+        case 3:
                 *fec = FEC_3_4;
                 break;
-        case 5:
+        case 4:
                 *fec = FEC_4_5;
                 break;
-        case 6:
+        case 5:
                 *fec = FEC_5_6;
                 break;
+        case 6:
+                *fec = FEC_6_7;
+                break;
         case 7:
                 *fec = FEC_7_8;
                 break;
-        case 2: /* *fec = FEC_3_5; break; */
-        case 0: /* *fec = FEC_5_11; break; */
-                *fec = FEC_AUTO;
-                break;
         default:
                 *fec = FEC_NONE; // can't happen
+                printk("FEC_NONE ?\n");
         }
 
         return 0;
 }
 
-/* fixme: Symbol rates < 3MSps may not work because of precision loss */
 static int cx24123_set_symbolrate(struct cx24123_state* state, u32 srate)
 {
-        u32 val;
+        u32 tmp, sample_rate, ratio;
+        u8 pll_mult;
+
+        /*  check if symbol rate is within limits */
+        if ((srate > state->ops.info.symbol_rate_max) ||
+            (srate < state->ops.info.symbol_rate_min))
+                return -EOPNOTSUPP;;
+
+        /* choose the sampling rate high enough for the required operation,
+           while optimizing the power consumed by the demodulator */
+        if (srate < (XTAL*2)/2)
+                pll_mult = 2;
+        else if (srate < (XTAL*3)/2)
+                pll_mult = 3;
+        else if (srate < (XTAL*4)/2)
+                pll_mult = 4;
+        else if (srate < (XTAL*5)/2)
+                pll_mult = 5;
+        else if (srate < (XTAL*6)/2)
+                pll_mult = 6;
+        else if (srate < (XTAL*7)/2)
+                pll_mult = 7;
+        else if (srate < (XTAL*8)/2)
+                pll_mult = 8;
+        else
+                pll_mult = 9;
+
+
+        sample_rate = pll_mult * XTAL;
 
-        val = (srate / 1185) * 100;
+        /*
+            SYSSymbolRate[21:0] = (srate << 23) / sample_rate
 
-        /* Compensate for scaling up, by removing 17 symbols per 1Msps */
-        val = val - (17 * (srate / 1000000));
+            We have to use 32 bit unsigned arithmetic without precision loss.
+            The maximum srate is 45000000 or 0x02AEA540. This number has
+            only 6 clear bits on top, hence we can shift it left only 6 bits
+            at a time. Borrowed from cx24110.c
+        */
 
-        cx24123_writereg(state, 0x08, (val >> 16) & 0xff );
-        cx24123_writereg(state, 0x09, (val >>  8) & 0xff );
-        cx24123_writereg(state, 0x0a, (val      ) & 0xff );
+        tmp = srate << 6;
+        ratio = tmp / sample_rate;
+
+        tmp = (tmp % sample_rate) << 6;
+        ratio = (ratio << 6) + (tmp / sample_rate);
+
+        tmp = (tmp % sample_rate) << 6;
+        ratio = (ratio << 6) + (tmp / sample_rate);
+
+        tmp = (tmp % sample_rate) << 5;
+        ratio = (ratio << 5) + (tmp / sample_rate);
+
+
+        cx24123_writereg(state, 0x01, pll_mult * 6);
+
+        cx24123_writereg(state, 0x08, (ratio >> 16) & 0x3f );
+        cx24123_writereg(state, 0x09, (ratio >>  8) & 0xff );
+        cx24123_writereg(state, 0x0a, (ratio      ) & 0xff );
+
+        dprintk("%s: srate=%d, ratio=0x%08x, sample_rate=%i\n", __FUNCTION__, srate, ratio, sample_rate);
 
         return 0;
 }
@@ -437,6 +452,7 @@ static int cx24123_pll_calculate(struct dvb_frontend* fe, struct dvb_frontend_pa
         struct cx24123_state *state = fe->demodulator_priv;
         u32 ndiv = 0, adiv = 0, vco_div = 0;
         int i = 0;
+        int pump = 2;
 
         /* Defaults for low freq, low rate */
         state->VCAarg = cx24123_AGC_vals[0].VCAprogdata;
@@ -444,13 +460,14 @@ static int cx24123_pll_calculate(struct dvb_frontend* fe, struct dvb_frontend_pa
         state->bandselectarg = cx24123_bandselect_vals[0].progdata;
         vco_div = cx24123_bandselect_vals[0].VCOdivider;
 
-        /* For the given symbolerate, determine the VCA and VGA programming bits */
+        /* For the given symbol rate, determine the VCA, VGA and FILTUNE programming bits */
         for (i = 0; i < sizeof(cx24123_AGC_vals) / sizeof(cx24123_AGC_vals[0]); i++)
         {
                 if ((cx24123_AGC_vals[i].symbolrate_low <= p->u.qpsk.symbol_rate) &&
-                                (cx24123_AGC_vals[i].symbolrate_high >= p->u.qpsk.symbol_rate) ) {
+                    (cx24123_AGC_vals[i].symbolrate_high >= p->u.qpsk.symbol_rate) ) {
                         state->VCAarg = cx24123_AGC_vals[i].VCAprogdata;
                         state->VGAarg = cx24123_AGC_vals[i].VGAprogdata;
+                        state->FILTune = cx24123_AGC_vals[i].FILTune;
                 }
         }
 
@@ -458,24 +475,28 @@ static int cx24123_pll_calculate(struct dvb_frontend* fe, struct dvb_frontend_pa
         for (i = 0; i < sizeof(cx24123_bandselect_vals) / sizeof(cx24123_bandselect_vals[0]); i++)
         {
                 if ((cx24123_bandselect_vals[i].freq_low <= p->frequency) &&
-                                (cx24123_bandselect_vals[i].freq_high >= p->frequency) ) {
+                    (cx24123_bandselect_vals[i].freq_high >= p->frequency) ) {
                         state->bandselectarg = cx24123_bandselect_vals[i].progdata;
                         vco_div = cx24123_bandselect_vals[i].VCOdivider;
+
+                        /* determine the charge pump current */
+                        if ( p->frequency < (cx24123_bandselect_vals[i].freq_low + cx24123_bandselect_vals[i].freq_high)/2 )
+                                pump = 0x01;
+                        else
+                                pump = 0x02;
                 }
         }
 
         /* Determine the N/A dividers for the requested lband freq (in kHz). */
-        /* Note: 10111 (kHz) is the Crystal Freq and divider of 10. */
-        ndiv = ( ((p->frequency * vco_div) / (10111 / 10) / 2) / 32) & 0x1ff;
-        adiv = ( ((p->frequency * vco_div) / (10111 / 10) / 2) % 32) & 0x1f;
+        /* Note: the reference divider R=10, frequency is in KHz, XTAL is in Hz */
+        ndiv = ( ((p->frequency * vco_div * 10) / (2 * XTAL / 1000)) / 32) & 0x1ff;
+        adiv = ( ((p->frequency * vco_div * 10) / (2 * XTAL / 1000)) % 32) & 0x1f;
 
         if (adiv == 0)
-                adiv++;
+                ndiv++;
 
-        /* determine the correct pll frequency values. */
-        /* Command 11, refdiv 11, cpump polarity 1, cpump current 3mA 10. */
-        state->pllarg = (3 << 19) | (3 << 17) | (1 << 16) | (2 << 14);
-        state->pllarg |= (ndiv << 5) | adiv;
+        /* control bits 11, refdiv 11, charge pump polarity 1, charge pump current, ndiv, adiv */
+        state->pllarg = (3 << 19) | (3 << 17) | (1 << 16) | (pump << 14) | (ndiv << 5) | adiv;
 
         return 0;
 }
@@ -538,6 +559,9 @@ static int cx24123_pll_writereg(struct dvb_frontend* fe, struct dvb_frontend_par
 static int cx24123_pll_tune(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
 {
         struct cx24123_state *state = fe->demodulator_priv;
+        u8 val;
+
+        dprintk("frequency=%i\n", p->frequency);
 
         if (cx24123_pll_calculate(fe, p) != 0) {
                 printk("%s: cx24123_pll_calcutate failed\n",__FUNCTION__);
@@ -552,6 +576,11 @@ static int cx24123_pll_tune(struct dvb_frontend* fe, struct dvb_frontend_paramet
         cx24123_pll_writereg(fe, p, state->bandselectarg);
         cx24123_pll_writereg(fe, p, state->pllarg);
 
+        /* set the FILTUNE voltage */
+        val = cx24123_readreg(state, 0x28) & ~0x3;
+        cx24123_writereg(state, 0x27, state->FILTune >> 2);
+        cx24123_writereg(state, 0x28, val | (state->FILTune & 0x3));
+
         return 0;
 }
 
@@ -624,13 +653,81 @@ static int cx24123_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage
         return 0;
 }
 
-static int cx24123_send_diseqc_msg(struct dvb_frontend* fe,
-                                   struct dvb_diseqc_master_cmd *cmd)
+static int cx24123_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *cmd)
 {
-        /* fixme: Implement diseqc */
-        printk("%s: No support yet\n",__FUNCTION__);
+        struct cx24123_state *state = fe->demodulator_priv;
+        int i, val;
+        unsigned long timeout;
+
+        dprintk("%s:\n",__FUNCTION__);
 
-        return -ENOTSUPP;
+        /* check if continuous tone has been stoped */
+        if (state->config->use_isl6421)
+                val = cx24123_readlnbreg(state, 0x00) & 0x10;
+        else
+                val = cx24123_readreg(state, 0x29) & 0x10;
+
+
+        if (val) {
+                printk("%s: ERROR: attempt to send diseqc command before tone is off\n", __FUNCTION__);
+                return -ENOTSUPP;
+        }
+
+        /* select tone mode */
+        cx24123_writereg(state, 0x2a, cx24123_readreg(state, 0x2a) & 0xf8);
+
+        for (i = 0; i < cmd->msg_len; i++)
+                cx24123_writereg(state, 0x2C + i, cmd->msg[i]);
+
+        val = cx24123_readreg(state, 0x29);
+        cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40) | ((cmd->msg_len-3) & 3));
+
+        timeout = jiffies + msecs_to_jiffies(100);
+        while (!time_after(jiffies, timeout) && !(cx24123_readreg(state, 0x29) & 0x40))
+                ; // wait for LNB ready
+
+        return 0;
+}
+
+static int cx24123_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst)
+{
+        struct cx24123_state *state = fe->demodulator_priv;
+        int val;
+        unsigned long timeout;
+
+        dprintk("%s:\n", __FUNCTION__);
+
+        /* check if continuous tone has been stoped */
+        if (state->config->use_isl6421)
+                val = cx24123_readlnbreg(state, 0x00) & 0x10;
+        else
+                val = cx24123_readreg(state, 0x29) & 0x10;
+
+
+        if (val) {
+                printk("%s: ERROR: attempt to send diseqc command before tone is off\n", __FUNCTION__);
+                return -ENOTSUPP;
+        }
+
+        /* select tone mode */
+        val = cx24123_readreg(state, 0x2a) & 0xf8;
+        cx24123_writereg(state, 0x2a, val | 0x04);
+
+        val = cx24123_readreg(state, 0x29);
+
+        if (burst == SEC_MINI_A)
+                cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40 | 0x00));
+        else if (burst == SEC_MINI_B)
+                cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40 | 0x08));
+        else
+                return -EINVAL;
+
+
+        timeout = jiffies + msecs_to_jiffies(100);
+        while (!time_after(jiffies, timeout) && !(cx24123_readreg(state, 0x29) & 0x40))
+                ; // wait for LNB ready
+
+        return 0;
 }
 
 static int cx24123_read_status(struct dvb_frontend* fe, fe_status_t* status)
@@ -642,13 +739,15 @@ static int cx24123_read_status(struct dvb_frontend* fe, fe_status_t* status)
 
         *status = 0;
         if (lock & 0x01)
-                *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL;
+                *status |= FE_HAS_SIGNAL;
+        if (sync & 0x02)
+                *status |= FE_HAS_CARRIER;
         if (sync & 0x04)
                 *status |= FE_HAS_VITERBI;
         if (sync & 0x08)
-                *status |= FE_HAS_CARRIER;
+                *status |= FE_HAS_SYNC;
         if (sync & 0x80)
-                *status |= FE_HAS_SYNC | FE_HAS_LOCK;
+                *status |= FE_HAS_LOCK;
 
         return 0;
 }
@@ -875,6 +974,7 @@ static struct dvb_frontend_ops cx24123_ops = {
         .read_snr = cx24123_read_snr,
         .read_ucblocks = cx24123_read_ucblocks,
         .diseqc_send_master_cmd = cx24123_send_diseqc_msg,
+        .diseqc_send_burst = cx24123_diseqc_send_burst,
         .set_tone = cx24123_set_tone,
         .set_voltage = cx24123_set_voltage,
 };