V4L/DVB (3218): Whitespace cleanups

- minor whitespace cleanups

Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>

1 files changed, 11 insertions, 11 deletions

diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c
index ecd056e951f1..d15d32c51dc5 100644
--- a/drivers/media/dvb/frontends/cx24110.c
+++ b/drivers/media/dvb/frontends/cx24110.c
@@ -55,7 +55,7 @@ static int debug;
 
 static struct {u8 reg; u8 data;} cx24110_regdata[]=
                       /* Comments beginning with @ denote this value should
-                         be the default */
+                         be the default */
         {{0x09,0x01}, /* SoftResetAll */
          {0x09,0x00}, /* release reset */
          {0x01,0xe8}, /* MSB of code rate 27.5MS/s */
@@ -66,26 +66,26 @@ static struct {u8 reg; u8 data;} cx24110_regdata[]=
          {0x07,0x01}, /* @ Fclk, i.e. sampling clock, 60MHz */
          {0x0a,0x00}, /* @ partial chip disables, do not set */
          {0x0b,0x01}, /* set output clock in gapped mode, start signal low
-                         active for first byte */
+                         active for first byte */
          {0x0c,0x11}, /* no parity bytes, large hold time, serial data out */
          {0x0d,0x6f}, /* @ RS Sync/Unsync thresholds */
          {0x10,0x40}, /* chip doc is misleading here: write bit 6 as 1
-                         to avoid starting the BER counter. Reset the
-                         CRC test bit. Finite counting selected */
+                         to avoid starting the BER counter. Reset the
+                         CRC test bit. Finite counting selected */
          {0x15,0xff}, /* @ size of the limited time window for RS BER
-                         estimation. It is <value>*256 RS blocks, this
-                         gives approx. 2.6 sec at 27.5MS/s, rate 3/4 */
+                         estimation. It is <value>*256 RS blocks, this
+                         gives approx. 2.6 sec at 27.5MS/s, rate 3/4 */
          {0x16,0x00}, /* @ enable all RS output ports */
          {0x17,0x04}, /* @ time window allowed for the RS to sync */
          {0x18,0xae}, /* @ allow all standard DVB code rates to be scanned
-                         for automatically */
+                         for automatically */
                       /* leave the current code rate and normalization
-                         registers as they are after reset... */
+                         registers as they are after reset... */
          {0x21,0x10}, /* @ during AutoAcq, search each viterbi setting
-                         only once */
+                         only once */
          {0x23,0x18}, /* @ size of the limited time window for Viterbi BER
-                         estimation. It is <value>*65536 channel bits, i.e.
-                         approx. 38ms at 27.5MS/s, rate 3/4 */
+                         estimation. It is <value>*65536 channel bits, i.e.
+                         approx. 38ms at 27.5MS/s, rate 3/4 */
          {0x24,0x24}, /* do not trigger Viterbi CRC test. Finite count window */
                       /* leave front-end AGC parameters at default values */
                       /* leave decimation AGC parameters at default values */