[PATCH] dvb: b2c2/flexcop driver refactoring part 2: add modular Flexcop driver

b2c2/flexcop driver refactoring to support PCI and USB based cards part 2: add
modular Flexcop driver

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 403 insertions, 0 deletions

diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
new file mode 100644
index 000000000000..b3dd16fb5bbd
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -0,0 +1,403 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC.
+ *
+ * see flexcop.c for copyright information.
+ */
+#include "flexcop.h"
+
+#include "stv0299.h"
+#include "mt352.h"
+#include "nxt2002.h"
+#include "stv0297.h"
+#include "mt312.h"
+
+/* lnb control */
+
+static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+        struct flexcop_device *fc = fe->dvb->priv;
+        flexcop_ibi_value v;
+        deb_tuner("polarity/voltage = %u\n", voltage);
+
+        v = fc->read_ibi_reg(fc, misc_204);
+        switch (voltage) {
+                case SEC_VOLTAGE_OFF:
+                        v.misc_204.ACPI1_sig = 1;
+                        break;
+                case SEC_VOLTAGE_13:
+                        v.misc_204.ACPI1_sig = 0;
+                        v.misc_204.LNB_L_H_sig = 0;
+                        break;
+                case SEC_VOLTAGE_18:
+                        v.misc_204.ACPI1_sig = 0;
+                        v.misc_204.LNB_L_H_sig = 1;
+                        break;
+                default:
+                        err("unknown SEC_VOLTAGE value");
+                        return -EINVAL;
+        }
+        return fc->write_ibi_reg(fc, misc_204, v);
+}
+
+static int flexcop_sleep(struct dvb_frontend* fe)
+{
+        struct flexcop_device *fc = fe->dvb->priv;
+/*      flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */
+
+        if (fc->fe_sleep)
+                return fc->fe_sleep(fe);
+
+/*      v.misc_204.ACPI3_sig = 1;
+        fc->write_ibi_reg(fc,misc_204,v);*/
+
+        return 0;
+}
+
+static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
+{
+        /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
+        struct flexcop_device *fc = fe->dvb->priv;
+        flexcop_ibi_value v;
+        u16 ax;
+        v.raw = 0;
+
+        deb_tuner("tone = %u\n",tone);
+
+        switch (tone) {
+                case SEC_TONE_ON:
+                        ax = 0x01ff;
+                        break;
+                case SEC_TONE_OFF:
+                        ax = 0;
+                        break;
+                default:
+                        err("unknown SEC_TONE value");
+                        return -EINVAL;
+        }
+
+        v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */
+
+        v.lnb_switch_freq_200.LNB_CTLHighCount_sig =
+                v.lnb_switch_freq_200.LNB_CTLLowCount_sig  = ax;
+
+        return fc->write_ibi_reg(fc,lnb_switch_freq_200,v);
+}
+
+static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data)
+{
+        flexcop_set_tone(fe, SEC_TONE_ON);
+        udelay(data ? 500 : 1000);
+        flexcop_set_tone(fe, SEC_TONE_OFF);
+        udelay(data ? 1000 : 500);
+}
+
+static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data)
+{
+        int i, par = 1, d;
+
+        for (i = 7; i >= 0; i--) {
+                d = (data >> i) & 1;
+                par ^= d;
+                flexcop_diseqc_send_bit(fe, d);
+        }
+
+        flexcop_diseqc_send_bit(fe, par);
+}
+
+static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, unsigned long burst)
+{
+        int i;
+
+        flexcop_set_tone(fe, SEC_TONE_OFF);
+        mdelay(16);
+
+        for (i = 0; i < len; i++)
+                flexcop_diseqc_send_byte(fe,msg[i]);
+
+        mdelay(16);
+
+        if (burst != -1) {
+                if (burst)
+                        flexcop_diseqc_send_byte(fe, 0xff);
+                else {
+                        flexcop_set_tone(fe, SEC_TONE_ON);
+                        udelay(12500);
+                        flexcop_set_tone(fe, SEC_TONE_OFF);
+                }
+                msleep(20);
+        }
+        return 0;
+}
+
+static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
+{
+        return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0);
+}
+
+static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
+{
+        return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd);
+}
+
+/* dvb-s stv0299 */
+static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
+{
+        u8 aclk = 0;
+        u8 bclk = 0;
+
+        if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
+        else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
+        else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
+        else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
+        else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
+        else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
+
+        stv0299_writereg (fe, 0x13, aclk);
+        stv0299_writereg (fe, 0x14, bclk);
+        stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
+        stv0299_writereg (fe, 0x20, (ratio >>  8) & 0xff);
+        stv0299_writereg (fe, 0x21, (ratio      ) & 0xf0);
+
+        return 0;
+}
+
+static int samsung_tbmu24112_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+        u8 buf[4];
+        u32 div;
+        struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
+        struct flexcop_device *fc = fe->dvb->priv;
+
+        div = params->frequency / 125;
+
+        buf[0] = (div >> 8) & 0x7f;
+        buf[1] = div & 0xff;
+        buf[2] = 0x84;  /* 0xC4 */
+        buf[3] = 0x08;
+
+        if (params->frequency < 1500000) buf[3] |= 0x10;
+
+        if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1)
+                return -EIO;
+        return 0;
+}
+
+static u8 samsung_tbmu24112_inittab[] = {
+             0x01, 0x15,
+             0x02, 0x30,
+             0x03, 0x00,
+             0x04, 0x7D,
+             0x05, 0x35,
+             0x06, 0x02,
+             0x07, 0x00,
+             0x08, 0xC3,
+             0x0C, 0x00,
+             0x0D, 0x81,
+             0x0E, 0x23,
+             0x0F, 0x12,
+             0x10, 0x7E,
+             0x11, 0x84,
+             0x12, 0xB9,
+             0x13, 0x88,
+             0x14, 0x89,
+             0x15, 0xC9,
+             0x16, 0x00,
+             0x17, 0x5C,
+             0x18, 0x00,
+             0x19, 0x00,
+             0x1A, 0x00,
+             0x1C, 0x00,
+             0x1D, 0x00,
+             0x1E, 0x00,
+             0x1F, 0x3A,
+             0x20, 0x2E,
+             0x21, 0x80,
+             0x22, 0xFF,
+             0x23, 0xC1,
+             0x28, 0x00,
+             0x29, 0x1E,
+             0x2A, 0x14,
+             0x2B, 0x0F,
+             0x2C, 0x09,
+             0x2D, 0x05,
+             0x31, 0x1F,
+             0x32, 0x19,
+             0x33, 0xFE,
+             0x34, 0x93,
+             0xff, 0xff,
+};
+
+static struct stv0299_config samsung_tbmu24112_config = {
+        .demod_address = 0x68,
+        .inittab = samsung_tbmu24112_inittab,
+        .mclk = 88000000UL,
+        .invert = 0,
+        .enhanced_tuning = 0,
+        .skip_reinit = 0,
+        .lock_output = STV0229_LOCKOUTPUT_LK,
+        .volt13_op0_op1 = STV0299_VOLT13_OP1,
+        .min_delay_ms = 100,
+        .set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
+        .pll_set = samsung_tbmu24112_pll_set,
+};
+
+/* dvb-t mt352 */
+static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
+{
+        static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d };
+        static u8 mt352_reset [] = { 0x50, 0x80 };
+        static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
+        static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 };
+        static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
+
+        mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
+        udelay(2000);
+        mt352_write(fe, mt352_reset, sizeof(mt352_reset));
+        mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
+
+        mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
+        mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
+
+        return 0;
+}
+
+static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf)
+{
+        u32 div;
+        unsigned char bs = 0;
+
+        #define IF_FREQUENCYx6 217    /* 6 * 36.16666666667MHz */
+        div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
+
+        if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09;
+        if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a;
+        if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08;
+
+        pllbuf[0] = 0xc2; /* Note: non-linux standard PLL i2c address */
+        pllbuf[1] = div >> 8;
+        pllbuf[2] = div & 0xff;
+        pllbuf[3] = 0xcc;
+        pllbuf[4] = bs;
+
+        return 0;
+}
+
+static struct mt352_config samsung_tdtc9251dh0_config = {
+
+        .demod_address = 0x0f,
+        .demod_init = samsung_tdtc9251dh0_demod_init,
+        .pll_set = samsung_tdtc9251dh0_pll_set,
+};
+
+static int nxt2002_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
+{
+        struct flexcop_device *fc = fe->dvb->priv;
+        return request_firmware(fw, name, fc->dev);
+}
+
+static struct nxt2002_config samsung_tbmv_config = {
+        .demod_address = 0x0a,
+        .request_firmware = nxt2002_request_firmware,
+};
+
+static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+        u8 buf[4];
+        u32 div;
+        struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
+        struct flexcop_device *fc = fe->dvb->priv;
+
+        div = (params->frequency + (125/2)) / 125;
+
+        buf[0] = (div >> 8) & 0x7f;
+        buf[1] = (div >> 0) & 0xff;
+        buf[2] = 0x84 | ((div >> 10) & 0x60);
+        buf[3] = 0x80;
+
+        if (params->frequency < 1550000)
+                buf[3] |= 0x02;
+
+        if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1)
+                return -EIO;
+        return 0;
+}
+
+static struct mt312_config skystar23_samsung_tbdu18132_config = {
+
+        .demod_address = 0x0e,
+        .pll_set = skystar23_samsung_tbdu18132_pll_set,
+};
+
+static struct stv0297_config alps_tdee4_stv0297_config = {
+        .demod_address = 0x1c,
+//      .invert = 1,
+//      .pll_set = alps_tdee4_stv0297_pll_set,
+};
+
+/* try to figure out the frontend, each card/box can have on of the following list */
+int flexcop_frontend_init(struct flexcop_device *fc)
+{
+        /* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */
+        if ((fc->fe = stv0299_attach(&samsung_tbmu24112_config, &fc->i2c_adap)) != NULL) {
+                fc->fe->ops->set_voltage = flexcop_set_voltage;
+
+                fc->fe_sleep             = fc->fe->ops->sleep;
+                fc->fe->ops->sleep       = flexcop_sleep;
+
+                fc->dev_type          = FC_SKY;
+                info("found the stv0299 at i2c address: 0x%02x",samsung_tbmu24112_config.demod_address);
+        } else
+        /* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */
+        if ((fc->fe = mt352_attach(&samsung_tdtc9251dh0_config, &fc->i2c_adap)) != NULL ) {
+                fc->dev_type          = FC_AIR_DVB;
+                info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address);
+        } else
+        /* try the air atsc (nxt2002) */
+        if ((fc->fe = nxt2002_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) {
+                fc->dev_type          = FC_AIR_ATSC;
+                info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address);
+        } else
+        /* try the cable dvb (stv0297) */
+        if ((fc->fe = stv0297_attach(&alps_tdee4_stv0297_config, &fc->i2c_adap, 0xf8)) != NULL) {
+                fc->dev_type                        = FC_CABLE;
+                info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address);
+        } else
+        /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
+        if ((fc->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
+                fc->fe->ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
+                fc->fe->ops->diseqc_send_burst      = flexcop_diseqc_send_burst;
+                fc->fe->ops->set_tone               = flexcop_set_tone;
+                fc->fe->ops->set_voltage            = flexcop_set_voltage;
+
+                fc->fe_sleep                        = fc->fe->ops->sleep;
+                fc->fe->ops->sleep                  = flexcop_sleep;
+
+                fc->dev_type                        = FC_SKY_OLD;
+                info("found the vp310 (aka mt312) at i2c address: 0x%02x",skystar23_samsung_tbdu18132_config.demod_address);
+        }
+
+        if (fc->fe == NULL) {
+                err("no frontend driver found for this B2C2/FlexCop adapter");
+                return -ENODEV;
+        } else {
+                if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) {
+                        err("frontend registration failed!");
+                        if (fc->fe->ops->release != NULL)
+                                fc->fe->ops->release(fc->fe);
+                        fc->fe = NULL;
+                        return -EINVAL;
+                }
+        }
+        fc->init_state |= FC_STATE_FE_INIT;
+        return 0;
+}
+
+void flexcop_frontend_exit(struct flexcop_device *fc)
+{
+        if (fc->init_state & FC_STATE_FE_INIT)
+                dvb_unregister_frontend(fc->fe);
+
+        fc->init_state &= ~FC_STATE_FE_INIT;
+}