Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 240 insertions, 0 deletions

diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
new file mode 100644
index 000000000000..ac43f98062fd
--- /dev/null
+++ b/drivers/md/Kconfig
@@ -0,0 +1,240 @@
+#
+# Block device driver configuration
+#
+
+menu "Multi-device support (RAID and LVM)"
+
+config MD
+        bool "Multiple devices driver support (RAID and LVM)"
+        help
+          Support multiple physical spindles through a single logical device.
+          Required for RAID and logical volume management.
+
+config BLK_DEV_MD
+        tristate "RAID support"
+        depends on MD
+        ---help---
+          This driver lets you combine several hard disk partitions into one
+          logical block device. This can be used to simply append one
+          partition to another one or to combine several redundant hard disks
+          into a RAID1/4/5 device so as to provide protection against hard
+          disk failures. This is called "Software RAID" since the combining of
+          the partitions is done by the kernel. "Hardware RAID" means that the
+          combining is done by a dedicated controller; if you have such a
+          controller, you do not need to say Y here.
+
+          More information about Software RAID on Linux is contained in the
+          Software RAID mini-HOWTO, available from
+          <http://www.tldp.org/docs.html#howto>. There you will also learn
+          where to get the supporting user space utilities raidtools.
+
+          If unsure, say N.
+
+config MD_LINEAR
+        tristate "Linear (append) mode"
+        depends on BLK_DEV_MD
+        ---help---
+          If you say Y here, then your multiple devices driver will be able to
+          use the so-called linear mode, i.e. it will combine the hard disk
+          partitions by simply appending one to the other.
+
+          To compile this as a module, choose M here: the module
+          will be called linear.
+
+          If unsure, say Y.
+
+config MD_RAID0
+        tristate "RAID-0 (striping) mode"
+        depends on BLK_DEV_MD
+        ---help---
+          If you say Y here, then your multiple devices driver will be able to
+          use the so-called raid0 mode, i.e. it will combine the hard disk
+          partitions into one logical device in such a fashion as to fill them
+          up evenly, one chunk here and one chunk there. This will increase
+          the throughput rate if the partitions reside on distinct disks.
+
+          Information about Software RAID on Linux is contained in the
+          Software-RAID mini-HOWTO, available from
+          <http://www.tldp.org/docs.html#howto>. There you will also
+          learn where to get the supporting user space utilities raidtools.
+
+          To compile this as a module, choose M here: the module
+          will be called raid0.
+
+          If unsure, say Y.
+
+config MD_RAID1
+        tristate "RAID-1 (mirroring) mode"
+        depends on BLK_DEV_MD
+        ---help---
+          A RAID-1 set consists of several disk drives which are exact copies
+          of each other.  In the event of a mirror failure, the RAID driver
+          will continue to use the operational mirrors in the set, providing
+          an error free MD (multiple device) to the higher levels of the
+          kernel.  In a set with N drives, the available space is the capacity
+          of a single drive, and the set protects against a failure of (N - 1)
+          drives.
+
+          Information about Software RAID on Linux is contained in the
+          Software-RAID mini-HOWTO, available from
+          <http://www.tldp.org/docs.html#howto>.  There you will also
+          learn where to get the supporting user space utilities raidtools.
+
+          If you want to use such a RAID-1 set, say Y.  To compile this code
+          as a module, choose M here: the module will be called raid1.
+
+          If unsure, say Y.
+
+config MD_RAID10
+        tristate "RAID-10 (mirrored striping) mode (EXPERIMENTAL)"
+        depends on BLK_DEV_MD && EXPERIMENTAL
+        ---help---
+          RAID-10 provides a combination of striping (RAID-0) and
+          mirroring (RAID-1) with easier configuration and more flexable
+          layout.
+          Unlike RAID-0, but like RAID-1, RAID-10 requires all devices to
+          be the same size (or at least, only as much as the smallest device
+          will be used).
+          RAID-10 provides a variety of layouts that provide different levels
+          of redundancy and performance.
+
+          RAID-10 requires mdadm-1.7.0 or later, available at:
+
+          ftp://ftp.kernel.org/pub/linux/utils/raid/mdadm/
+
+          If unsure, say Y.
+
+config MD_RAID5
+        tristate "RAID-4/RAID-5 mode"
+        depends on BLK_DEV_MD
+        ---help---
+          A RAID-5 set of N drives with a capacity of C MB per drive provides
+          the capacity of C * (N - 1) MB, and protects against a failure
+          of a single drive. For a given sector (row) number, (N - 1) drives
+          contain data sectors, and one drive contains the parity protection.
+          For a RAID-4 set, the parity blocks are present on a single drive,
+          while a RAID-5 set distributes the parity across the drives in one
+          of the available parity distribution methods.
+
+          Information about Software RAID on Linux is contained in the
+          Software-RAID mini-HOWTO, available from
+          <http://www.tldp.org/docs.html#howto>. There you will also
+          learn where to get the supporting user space utilities raidtools.
+
+          If you want to use such a RAID-4/RAID-5 set, say Y.  To
+          compile this code as a module, choose M here: the module
+          will be called raid5.
+
+          If unsure, say Y.
+
+config MD_RAID6
+        tristate "RAID-6 mode"
+        depends on BLK_DEV_MD
+        ---help---
+          A RAID-6 set of N drives with a capacity of C MB per drive
+          provides the capacity of C * (N - 2) MB, and protects
+          against a failure of any two drives. For a given sector
+          (row) number, (N - 2) drives contain data sectors, and two
+          drives contains two independent redundancy syndromes.  Like
+          RAID-5, RAID-6 distributes the syndromes across the drives
+          in one of the available parity distribution methods.
+
+          RAID-6 requires mdadm-1.5.0 or later, available at:
+
+          ftp://ftp.kernel.org/pub/linux/utils/raid/mdadm/
+
+          If you want to use such a RAID-6 set, say Y.  To compile
+          this code as a module, choose M here: the module will be
+          called raid6.
+
+          If unsure, say Y.
+
+config MD_MULTIPATH
+        tristate "Multipath I/O support"
+        depends on BLK_DEV_MD
+        help
+          Multipath-IO is the ability of certain devices to address the same
+          physical disk over multiple 'IO paths'. The code ensures that such
+          paths can be defined and handled at runtime, and ensures that a
+          transparent failover to the backup path(s) happens if a IO errors
+          arrives on the primary path.
+
+          If unsure, say N.
+
+config MD_FAULTY
+        tristate "Faulty test module for MD"
+        depends on BLK_DEV_MD
+        help
+          The "faulty" module allows for a block device that occasionally returns
+          read or write errors.  It is useful for testing.
+
+          In unsure, say N.
+
+config BLK_DEV_DM
+        tristate "Device mapper support"
+        depends on MD
+        ---help---
+          Device-mapper is a low level volume manager.  It works by allowing
+          people to specify mappings for ranges of logical sectors.  Various
+          mapping types are available, in addition people may write their own
+          modules containing custom mappings if they wish.
+
+          Higher level volume managers such as LVM2 use this driver.
+
+          To compile this as a module, choose M here: the module will be
+          called dm-mod.
+
+          If unsure, say N.
+
+config DM_CRYPT
+        tristate "Crypt target support"
+        depends on BLK_DEV_DM && EXPERIMENTAL
+        select CRYPTO
+        ---help---
+          This device-mapper target allows you to create a device that
+          transparently encrypts the data on it. You'll need to activate
+          the ciphers you're going to use in the cryptoapi configuration.
+
+          Information on how to use dm-crypt can be found on
+
+          <http://www.saout.de/misc/dm-crypt/>
+
+          To compile this code as a module, choose M here: the module will
+          be called dm-crypt.
+
+          If unsure, say N.
+
+config DM_SNAPSHOT
+       tristate "Snapshot target (EXPERIMENTAL)"
+       depends on BLK_DEV_DM && EXPERIMENTAL
+       ---help---
+         Allow volume managers to take writeable snapshots of a device.
+
+config DM_MIRROR
+       tristate "Mirror target (EXPERIMENTAL)"
+       depends on BLK_DEV_DM && EXPERIMENTAL
+       ---help---
+         Allow volume managers to mirror logical volumes, also
+         needed for live data migration tools such as 'pvmove'.
+
+config DM_ZERO
+        tristate "Zero target (EXPERIMENTAL)"
+        depends on BLK_DEV_DM && EXPERIMENTAL
+        ---help---
+          A target that discards writes, and returns all zeroes for
+          reads.  Useful in some recovery situations.
+
+config DM_MULTIPATH
+        tristate "Multipath target (EXPERIMENTAL)"
+        depends on BLK_DEV_DM && EXPERIMENTAL
+        ---help---
+          Allow volume managers to support multipath hardware.
+
+config DM_MULTIPATH_EMC
+        tristate "EMC CX/AX multipath support (EXPERIMENTAL)"
+        depends on DM_MULTIPATH && BLK_DEV_DM && EXPERIMENTAL
+        ---help---
+          Multipath support for EMC CX/AX series hardware.
+
+endmenu
+