Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Minor comment fix for misc_64.S
  [POWERPC] Use H_CEDE on non-SMT
  [POWERPC] force 64bit mode in fwnmi handlers to workaround firmware bugs
  [POWERPC] PMAC_APM_EMU should depend on ADB_PMU
  [POWERPC] Fix new interrupt code (MPIC detection)
  [POWERPC] Fix new interrupt code (MPIC endianness)
  [POWERPC] Add cpufreq support for Xserve G5
  [POWERPC] Xserve G5 thermal control fixes
  [POWERPC] Fix mem= handling when the memory limit is > RMO size
  [POWERPC] More offb/bootx fixes
  [POWERPC] Fix legacy_serial.c error handling on 32 bits
  [POWERPC] Fix default clock for udbg_16550
  [POWERPC] Fix non-MPIC CHRPs with CONFIG_SMP set
  [POWERPC] Fix 32 bits warning in prom_init.c
  [POWERPC] Workaround Pegasos incorrect ISA "ranges"
  [POWERPC] fix up front-LED Kconfig

4 files changed, 245 insertions, 19 deletions

diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index d162307e309f..d5d649f5ccdb 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -90,6 +90,15 @@ config ADB_PMU_LED
           and the ide-disk LED trigger and configure appropriately through
           sysfs.
 
+config ADB_PMU_LED_IDE
+        bool "Use front LED as IDE LED by default"
+        depends on ADB_PMU_LED
+        select LEDS_TRIGGERS
+        select LEDS_TRIGGER_IDE_DISK
+        help
+          This option makes the front LED default to the IDE trigger
+          so that it blinks on IDE activity.
+
 config PMAC_SMU
         bool "Support for SMU  based PowerMacs"
         depends on PPC_PMAC64
@@ -100,7 +109,7 @@ config PMAC_SMU
 
 config PMAC_APM_EMU
         tristate "APM emulation"
-        depends on PPC_PMAC && PPC32 && PM
+        depends on PPC_PMAC && PPC32 && PM && ADB_PMU
 
 config PMAC_MEDIABAY
         bool "Support PowerBook hotswap media bay"
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index c1fe0b368f76..20bf67244e2c 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -95,6 +95,17 @@
  *      - Use min/max macros here or there
  *      - Latest darwin updated U3H min fan speed to 20% PWM
  *
+ *  July. 06, 2006 : 1.3
+ *      - Fix setting of RPM fans on Xserve G5 (they were going too fast)
+ *      - Add missing slots fan control loop for Xserve G5
+ *      - Lower fixed slots fan speed from 50% to 40% on desktop G5s. We
+ *        still can't properly implement the control loop for these, so let's
+ *        reduce the noise a little bit, it appears that 40% still gives us
+ *        a pretty good air flow
+ *      - Add code to "tickle" the FCU regulary so it doesn't think that
+ *        we are gone while in fact, the machine just didn't need any fan
+ *        speed change lately
+ *
  */
 
 #include <linux/types.h>
@@ -121,7 +132,7 @@
 
 #include "therm_pm72.h"
 
-#define VERSION "1.2b2"
+#define VERSION "1.3"
 
 #undef DEBUG
 
@@ -146,6 +157,7 @@ static struct basckside_pid_params	backside_params;
 static struct backside_pid_state        backside_state;
 static struct drives_pid_state          drives_state;
 static struct dimm_pid_state            dimms_state;
+static struct slots_pid_state           slots_state;
 static int                              state;
 static int                              cpu_count;
 static int                              cpu_pid_type;
@@ -154,7 +166,8 @@ static struct completion		ctrl_complete;
 static int                              critical_state;
 static int                              rackmac;
 static s32                              dimm_output_clamp;
-
+static int                              fcu_rpm_shift;
+static int                              fcu_tickle_ticks;
 static DECLARE_MUTEX(driver_lock);
 
 /*
@@ -495,13 +508,20 @@ static int start_fcu(void)
         rc = fan_write_reg(0x2e, &buf, 1);
         if (rc < 0)
                 return -EIO;
+        rc = fan_read_reg(0, &buf, 1);
+        if (rc < 0)
+                return -EIO;
+        fcu_rpm_shift = (buf == 1) ? 2 : 3;
+        printk(KERN_DEBUG "FCU Initialized, RPM fan shift is %d\n",
+               fcu_rpm_shift);
+
         return 0;
 }
 
 static int set_rpm_fan(int fan_index, int rpm)
 {
         unsigned char buf[2];
-        int rc, id;
+        int rc, id, min, max;
 
         if (fcu_fans[fan_index].type != FCU_FAN_RPM)
                 return -EINVAL;
@@ -509,12 +529,15 @@ static int set_rpm_fan(int fan_index, int rpm)
         if (id == FCU_FAN_ABSENT_ID)
                 return -EINVAL;
 
-        if (rpm < 300)
-                rpm = 300;
-        else if (rpm > 8191)
-                rpm = 8191;
-        buf[0] = rpm >> 5;
-        buf[1] = rpm << 3;
+        min = 2400 >> fcu_rpm_shift;
+        max = 56000 >> fcu_rpm_shift;
+
+        if (rpm < min)
+                rpm = min;
+        else if (rpm > max)
+                rpm = max;
+        buf[0] = rpm >> (8 - fcu_rpm_shift);
+        buf[1] = rpm << fcu_rpm_shift;
         rc = fan_write_reg(0x10 + (id * 2), buf, 2);
         if (rc < 0)
                 return -EIO;
@@ -551,7 +574,7 @@ static int get_rpm_fan(int fan_index, int programmed)
         if (rc != 2)
                 return -EIO;
 
-        return (buf[0] << 5) | buf[1] >> 3;
+        return (buf[0] << (8 - fcu_rpm_shift)) | buf[1] >> fcu_rpm_shift;
 }
 
 static int set_pwm_fan(int fan_index, int pwm)
@@ -609,6 +632,26 @@ static int get_pwm_fan(int fan_index)
         return (buf[0] * 1000) / 2559;
 }
 
+static void tickle_fcu(void)
+{
+        int pwm;
+
+        pwm = get_pwm_fan(SLOTS_FAN_PWM_INDEX);
+
+        DBG("FCU Tickle, slots fan is: %d\n", pwm);
+        if (pwm < 0)
+                pwm = 100;
+
+        if (!rackmac) {
+                pwm = SLOTS_FAN_DEFAULT_PWM;
+        } else if (pwm < SLOTS_PID_OUTPUT_MIN)
+                pwm = SLOTS_PID_OUTPUT_MIN;
+
+        /* That is hopefully enough to make the FCU happy */
+        set_pwm_fan(SLOTS_FAN_PWM_INDEX, pwm);
+}
+
+
 /*
  * Utility routine to read the CPU calibration EEPROM data
  * from the device-tree
@@ -715,6 +758,9 @@ BUILD_SHOW_FUNC_INT(backside_fan_pwm, backside_state.pwm)
 BUILD_SHOW_FUNC_FIX(drives_temperature, drives_state.last_temp)
 BUILD_SHOW_FUNC_INT(drives_fan_rpm, drives_state.rpm)
 
+BUILD_SHOW_FUNC_FIX(slots_temperature, slots_state.last_temp)
+BUILD_SHOW_FUNC_INT(slots_fan_pwm, slots_state.pwm)
+
 BUILD_SHOW_FUNC_FIX(dimms_temperature, dimms_state.last_temp)
 
 static DEVICE_ATTR(cpu0_temperature,S_IRUGO,show_cpu0_temperature,NULL);
@@ -735,6 +781,9 @@ static DEVICE_ATTR(backside_fan_pwm,S_IRUGO,show_backside_fan_pwm,NULL);
 static DEVICE_ATTR(drives_temperature,S_IRUGO,show_drives_temperature,NULL);
 static DEVICE_ATTR(drives_fan_rpm,S_IRUGO,show_drives_fan_rpm,NULL);
 
+static DEVICE_ATTR(slots_temperature,S_IRUGO,show_slots_temperature,NULL);
+static DEVICE_ATTR(slots_fan_pwm,S_IRUGO,show_slots_fan_pwm,NULL);
+
 static DEVICE_ATTR(dimms_temperature,S_IRUGO,show_dimms_temperature,NULL);
 
 /*
@@ -1076,6 +1125,9 @@ static void do_monitor_cpu_rack(struct cpu_pid_state *state)
         fan_min = dimm_output_clamp;
         fan_min = max(fan_min, (int)state->mpu.rminn_intake_fan);
 
+        DBG(" CPU min mpu = %d, min dimm = %d\n",
+            state->mpu.rminn_intake_fan, dimm_output_clamp);
+
         state->rpm = max(state->rpm, (int)fan_min);
         state->rpm = min(state->rpm, (int)state->mpu.rmaxn_intake_fan);
         state->intake_rpm = state->rpm;
@@ -1374,7 +1426,8 @@ static void do_monitor_drives(struct drives_pid_state *state)
         DBG("  current rpm: %d\n", state->rpm);
 
         /* Get some sensor readings */
-        temp = le16_to_cpu(i2c_smbus_read_word_data(state->monitor, DS1775_TEMP)) << 8;
+        temp = le16_to_cpu(i2c_smbus_read_word_data(state->monitor,
+                                                    DS1775_TEMP)) << 8;
         state->last_temp = temp;
         DBG("  temp: %d.%03d, target: %d.%03d\n", FIX32TOPRINT(temp),
             FIX32TOPRINT(DRIVES_PID_INPUT_TARGET));
@@ -1575,7 +1628,7 @@ static int init_dimms_state(struct dimm_pid_state *state)
 }
 
 /*
- * Dispose of the state data for the drives control loop
+ * Dispose of the state data for the DIMM control loop
  */
 static void dispose_dimms_state(struct dimm_pid_state *state)
 {
@@ -1588,6 +1641,127 @@ static void dispose_dimms_state(struct dimm_pid_state *state)
         state->monitor = NULL;
 }
 
+/*
+ * Slots fan control loop
+ */
+static void do_monitor_slots(struct slots_pid_state *state)
+{
+        s32 temp, integral, derivative;
+        s64 integ_p, deriv_p, prop_p, sum;
+        int i, rc;
+
+        if (--state->ticks != 0)
+                return;
+        state->ticks = SLOTS_PID_INTERVAL;
+
+        DBG("slots:\n");
+
+        /* Check fan status */
+        rc = get_pwm_fan(SLOTS_FAN_PWM_INDEX);
+        if (rc < 0) {
+                printk(KERN_WARNING "Error %d reading slots fan !\n", rc);
+                /* XXX What do we do now ? */
+        } else
+                state->pwm = rc;
+        DBG("  current pwm: %d\n", state->pwm);
+
+        /* Get some sensor readings */
+        temp = le16_to_cpu(i2c_smbus_read_word_data(state->monitor,
+                                                    DS1775_TEMP)) << 8;
+        state->last_temp = temp;
+        DBG("  temp: %d.%03d, target: %d.%03d\n", FIX32TOPRINT(temp),
+            FIX32TOPRINT(SLOTS_PID_INPUT_TARGET));
+
+        /* Store temperature and error in history array */
+        state->cur_sample = (state->cur_sample + 1) % SLOTS_PID_HISTORY_SIZE;
+        state->sample_history[state->cur_sample] = temp;
+        state->error_history[state->cur_sample] = temp - SLOTS_PID_INPUT_TARGET;
+
+        /* If first loop, fill the history table */
+        if (state->first) {
+                for (i = 0; i < (SLOTS_PID_HISTORY_SIZE - 1); i++) {
+                        state->cur_sample = (state->cur_sample + 1) %
+                                SLOTS_PID_HISTORY_SIZE;
+                        state->sample_history[state->cur_sample] = temp;
+                        state->error_history[state->cur_sample] =
+                                temp - SLOTS_PID_INPUT_TARGET;
+                }
+                state->first = 0;
+        }
+
+        /* Calculate the integral term */
+        sum = 0;
+        integral = 0;
+        for (i = 0; i < SLOTS_PID_HISTORY_SIZE; i++)
+                integral += state->error_history[i];
+        integral *= SLOTS_PID_INTERVAL;
+        DBG("  integral: %08x\n", integral);
+        integ_p = ((s64)SLOTS_PID_G_r) * (s64)integral;
+        DBG("   integ_p: %d\n", (int)(integ_p >> 36));
+        sum += integ_p;
+
+        /* Calculate the derivative term */
+        derivative = state->error_history[state->cur_sample] -
+                state->error_history[(state->cur_sample + SLOTS_PID_HISTORY_SIZE - 1)
+                                    % SLOTS_PID_HISTORY_SIZE];
+        derivative /= SLOTS_PID_INTERVAL;
+        deriv_p = ((s64)SLOTS_PID_G_d) * (s64)derivative;
+        DBG("   deriv_p: %d\n", (int)(deriv_p >> 36));
+        sum += deriv_p;
+
+        /* Calculate the proportional term */
+        prop_p = ((s64)SLOTS_PID_G_p) * (s64)(state->error_history[state->cur_sample]);
+        DBG("   prop_p: %d\n", (int)(prop_p >> 36));
+        sum += prop_p;
+
+        /* Scale sum */
+        sum >>= 36;
+
+        DBG("   sum: %d\n", (int)sum);
+        state->pwm = (s32)sum;
+
+        state->pwm = max(state->pwm, SLOTS_PID_OUTPUT_MIN);
+        state->pwm = min(state->pwm, SLOTS_PID_OUTPUT_MAX);
+
+        DBG("** DRIVES PWM: %d\n", (int)state->pwm);
+        set_pwm_fan(SLOTS_FAN_PWM_INDEX, state->pwm);
+}
+
+/*
+ * Initialize the state structure for the slots bay fan control loop
+ */
+static int init_slots_state(struct slots_pid_state *state)
+{
+        state->ticks = 1;
+        state->first = 1;
+        state->pwm = 50;
+
+        state->monitor = attach_i2c_chip(XSERVE_SLOTS_LM75, "slots_temp");
+        if (state->monitor == NULL)
+                return -ENODEV;
+
+        device_create_file(&of_dev->dev, &dev_attr_slots_temperature);
+        device_create_file(&of_dev->dev, &dev_attr_slots_fan_pwm);
+
+        return 0;
+}
+
+/*
+ * Dispose of the state data for the slots control loop
+ */
+static void dispose_slots_state(struct slots_pid_state *state)
+{
+        if (state->monitor == NULL)
+                return;
+
+        device_remove_file(&of_dev->dev, &dev_attr_slots_temperature);
+        device_remove_file(&of_dev->dev, &dev_attr_slots_fan_pwm);
+
+        detach_i2c_chip(state->monitor);
+        state->monitor = NULL;
+}
+
+
 static int call_critical_overtemp(void)
 {
         char *argv[] = { critical_overtemp_path, NULL };
@@ -1617,14 +1791,17 @@ static int main_control_loop(void *x)
                 goto out;
         }
 
-        /* Set the PCI fan once for now */
-        set_pwm_fan(SLOTS_FAN_PWM_INDEX, SLOTS_FAN_DEFAULT_PWM);
+        /* Set the PCI fan once for now on non-RackMac */
+        if (!rackmac)
+                set_pwm_fan(SLOTS_FAN_PWM_INDEX, SLOTS_FAN_DEFAULT_PWM);
 
         /* Initialize ADCs */
         initialize_adc(&cpu_state[0]);
         if (cpu_state[1].monitor != NULL)
                 initialize_adc(&cpu_state[1]);
 
+        fcu_tickle_ticks = FCU_TICKLE_TICKS;
+
         up(&driver_lock);
 
         while (state == state_attached) {
@@ -1634,6 +1811,12 @@ static int main_control_loop(void *x)
 
                 down(&driver_lock);
 
+                /* Tickle the FCU just in case */
+                if (--fcu_tickle_ticks < 0) {
+                        fcu_tickle_ticks = FCU_TICKLE_TICKS;
+                        tickle_fcu();
+                }
+
                 /* First, we always calculate the new DIMMs state on an Xserve */
                 if (rackmac)
                         do_monitor_dimms(&dimms_state);
@@ -1654,7 +1837,9 @@ static int main_control_loop(void *x)
                 }
                 /* Then, the rest */
                 do_monitor_backside(&backside_state);
-                if (!rackmac)
+                if (rackmac)
+                        do_monitor_slots(&slots_state);
+                else
                         do_monitor_drives(&drives_state);
                 up(&driver_lock);
 
@@ -1696,6 +1881,7 @@ static void dispose_control_loops(void)
         dispose_cpu_state(&cpu_state[1]);
         dispose_backside_state(&backside_state);
         dispose_drives_state(&drives_state);
+        dispose_slots_state(&slots_state);
         dispose_dimms_state(&dimms_state);
 }
 
@@ -1745,6 +1931,8 @@ static int create_control_loops(void)
                 goto fail;
         if (rackmac && init_dimms_state(&dimms_state))
                 goto fail;
+        if (rackmac && init_slots_state(&slots_state))
+                goto fail;
         if (!rackmac && init_drives_state(&drives_state))
                 goto fail;
 
diff --git a/drivers/macintosh/therm_pm72.h b/drivers/macintosh/therm_pm72.h
index fc7e9b7ecaf2..393cc9df94e1 100644
--- a/drivers/macintosh/therm_pm72.h
+++ b/drivers/macintosh/therm_pm72.h
@@ -105,6 +105,7 @@ static char * critical_overtemp_path = "/sbin/critical_overtemp";
 #define DRIVES_DALLAS_ID        0x94
 #define BACKSIDE_MAX_ID         0x98
 #define XSERVE_DIMMS_LM87       0x25a
+#define XSERVE_SLOTS_LM75       0x290
 
 /*
  * Some MAX6690, DS1775, LM87 register definitions
@@ -198,7 +199,7 @@ struct drives_pid_state
 
 #define SLOTS_FAN_PWM_DEFAULT_ID        2
 #define SLOTS_FAN_PWM_INDEX             2
-#define SLOTS_FAN_DEFAULT_PWM           50 /* Do better here ! */
+#define SLOTS_FAN_DEFAULT_PWM           40 /* Do better here ! */
 
 
 /*
@@ -206,7 +207,7 @@ struct drives_pid_state
  */
 #define DIMM_PID_G_d                    0
 #define DIMM_PID_G_p                    0
-#define DIMM_PID_G_r                    0x6553600
+#define DIMM_PID_G_r                    0x06553600
 #define DIMM_PID_INPUT_TARGET           3276800
 #define DIMM_PID_INTERVAL               1
 #define DIMM_PID_OUTPUT_MAX             14000
@@ -226,6 +227,31 @@ struct dimm_pid_state
 };
 
 
+/*
+ * PID factors for the Xserve Slots control loop
+ */
+#define SLOTS_PID_G_d                   0
+#define SLOTS_PID_G_p                   0
+#define SLOTS_PID_G_r                   0x00100000
+#define SLOTS_PID_INPUT_TARGET          3200000
+#define SLOTS_PID_INTERVAL              1
+#define SLOTS_PID_OUTPUT_MAX            100
+#define SLOTS_PID_OUTPUT_MIN            20
+#define SLOTS_PID_HISTORY_SIZE          20
+
+struct slots_pid_state
+{
+        int                     ticks;
+        struct i2c_client *     monitor;
+        s32                     sample_history[SLOTS_PID_HISTORY_SIZE];
+        s32                     error_history[SLOTS_PID_HISTORY_SIZE];
+        int                     cur_sample;
+        s32                     last_temp;
+        int                     first;
+        int                     pwm;
+};
+
+
 
 /* Desktops */
 
@@ -283,6 +309,9 @@ struct cpu_pid_state
         s32                     pump_max;
 };
 
+/* Tickle FCU every 10 seconds */
+#define FCU_TICKLE_TICKS        10
+
 /*
  * Driver state
  */
diff --git a/drivers/macintosh/via-pmu-led.c b/drivers/macintosh/via-pmu-led.c
index af8375ed0f5e..5189d5454b1f 100644
--- a/drivers/macintosh/via-pmu-led.c
+++ b/drivers/macintosh/via-pmu-led.c
@@ -74,7 +74,7 @@ static void pmu_led_set(struct led_classdev *led_cdev,
 
 static struct led_classdev pmu_led = {
         .name = "pmu-front-led",
-#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK
+#ifdef CONFIG_ADB_PMU_LED_IDE
         .default_trigger = "ide-disk",
 #endif
         .brightness_set = pmu_led_set,