leds: Kconfig cleanup

Remove the need for "depends on LEDS_CLASS" by wrapping the affected
config options in an if/endif block. Similar for "depends on LEDS_TRIGGERS".

LEDS_COBALT_RAQ still has a "depends on LEDS_CLASS=y" since it cannot
be selected to build as a module.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

1 files changed, 39 insertions, 36 deletions

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 023eda6dfdb6..d86e1a3ee0b7 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -15,6 +15,8 @@ config LEDS_CLASS
           This option enables the led sysfs class in /sys/class/leds.  You'll
           need this to do anything useful with LEDs.  If unsure, say N.
 
+if LEDS_CLASS
+
 comment "LED drivers"
 
 config LEDS_88PM860X
@@ -26,73 +28,73 @@ config LEDS_88PM860X
 
 config LEDS_ATMEL_PWM
         tristate "LED Support using Atmel PWM outputs"
-        depends on LEDS_CLASS && ATMEL_PWM
+        depends on ATMEL_PWM
         help
           This option enables support for LEDs driven using outputs
           of the dedicated PWM controller found on newer Atmel SOCs.
 
 config LEDS_LOCOMO
         tristate "LED Support for Locomo device"
-        depends on LEDS_CLASS && SHARP_LOCOMO
+        depends on SHARP_LOCOMO
         help
           This option enables support for the LEDs on Sharp Locomo.
           Zaurus models SL-5500 and SL-5600.
 
 config LEDS_MIKROTIK_RB532
         tristate "LED Support for Mikrotik Routerboard 532"
-        depends on LEDS_CLASS && MIKROTIK_RB532
+        depends on MIKROTIK_RB532
         help
           This option enables support for the so called "User LED" of
           Mikrotik's Routerboard 532.
 
 config LEDS_S3C24XX
         tristate "LED Support for Samsung S3C24XX GPIO LEDs"
-        depends on LEDS_CLASS && ARCH_S3C2410
+        depends on ARCH_S3C2410
         help
           This option enables support for LEDs connected to GPIO lines
           on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.
 
 config LEDS_AMS_DELTA
         tristate "LED Support for the Amstrad Delta (E3)"
-        depends on LEDS_CLASS && MACH_AMS_DELTA
+        depends on MACH_AMS_DELTA
         help
           This option enables support for the LEDs on Amstrad Delta (E3).
 
 config LEDS_NET48XX
         tristate "LED Support for Soekris net48xx series Error LED"
-        depends on LEDS_CLASS && SCx200_GPIO
+        depends on SCx200_GPIO
         help
           This option enables support for the Soekris net4801 and net4826 error
           LED.
 
 config LEDS_FSG
         tristate "LED Support for the Freecom FSG-3"
-        depends on LEDS_CLASS && MACH_FSG
+        depends on MACH_FSG
         help
           This option enables support for the LEDs on the Freecom FSG-3.
 
 config LEDS_WRAP
         tristate "LED Support for the WRAP series LEDs"
-        depends on LEDS_CLASS && SCx200_GPIO
+        depends on SCx200_GPIO
         help
           This option enables support for the PCEngines WRAP programmable LEDs.
 
 config LEDS_ALIX2
         tristate "LED Support for ALIX.2 and ALIX.3 series"
-        depends on LEDS_CLASS && X86 && !GPIO_CS5535 && !CS5535_GPIO
+        depends on X86 && !GPIO_CS5535 && !CS5535_GPIO
         help
           This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
           You have to set leds-alix2.force=1 for boards with Award BIOS.
 
 config LEDS_H1940
         tristate "LED Support for iPAQ H1940 device"
-        depends on LEDS_CLASS && ARCH_H1940
+        depends on ARCH_H1940
         help
           This option enables support for the LEDs on the h1940.
 
 config LEDS_COBALT_QUBE
         tristate "LED Support for the Cobalt Qube series front LED"
-        depends on LEDS_CLASS && MIPS_COBALT
+        depends on MIPS_COBALT
         help
           This option enables support for the front LED on Cobalt Qube series
 
@@ -105,7 +107,7 @@ config LEDS_COBALT_RAQ
 
 config LEDS_SUNFIRE
         tristate "LED support for SunFire servers."
-        depends on LEDS_CLASS && SPARC64
+        depends on SPARC64
         select LEDS_TRIGGERS
         help
           This option enables support for the Left, Middle, and Right
@@ -113,14 +115,14 @@ config LEDS_SUNFIRE
 
 config LEDS_HP6XX
         tristate "LED Support for the HP Jornada 6xx"
-        depends on LEDS_CLASS && SH_HP6XX
+        depends on SH_HP6XX
         help
           This option enables LED support for the handheld
           HP Jornada 620/660/680/690.
 
 config LEDS_PCA9532
         tristate "LED driver for PCA9532 dimmer"
-        depends on LEDS_CLASS && I2C && INPUT && EXPERIMENTAL
+        depends on I2C && INPUT && EXPERIMENTAL
         help
           This option enables support for NXP pca9532
           LED controller. It is generally only useful
@@ -128,7 +130,7 @@ config LEDS_PCA9532
 
 config LEDS_GPIO
         tristate "LED Support for GPIO connected LEDs"
-        depends on LEDS_CLASS && GENERIC_GPIO
+        depends on GENERIC_GPIO
         help
           This option enables support for the LEDs connected to GPIO
           outputs. To be useful the particular board must have LEDs
@@ -155,7 +157,7 @@ config LEDS_GPIO_OF
 
 config LEDS_LP3944
         tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
-        depends on LEDS_CLASS && I2C
+        depends on I2C
         help
           This option enables support for LEDs connected to the National
           Semiconductor LP3944 Lighting Management Unit (LMU) also known as
@@ -166,7 +168,7 @@ config LEDS_LP3944
 
 config LEDS_CLEVO_MAIL
         tristate "Mail LED on Clevo notebook"
-        depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI
+        depends on X86 && SERIO_I8042 && DMI
         help
           This driver makes the mail LED accessible from userspace
           programs through the leds subsystem. This LED have three
@@ -196,7 +198,7 @@ config LEDS_CLEVO_MAIL
 
 config LEDS_PCA955X
         tristate "LED Support for PCA955x I2C chips"
-        depends on LEDS_CLASS && I2C
+        depends on I2C
         help
           This option enables support for LEDs connected to PCA955x
           LED driver chips accessed via the I2C bus.  Supported
@@ -204,54 +206,54 @@ config LEDS_PCA955X
 
 config LEDS_WM831X_STATUS
         tristate "LED support for status LEDs on WM831x PMICs"
-        depends on LEDS_CLASS && MFD_WM831X
+        depends on MFD_WM831X
         help
           This option enables support for the status LEDs of the WM831x
           series of PMICs.
 
 config LEDS_WM8350
         tristate "LED Support for WM8350 AudioPlus PMIC"
-        depends on LEDS_CLASS && MFD_WM8350
+        depends on MFD_WM8350
         help
           This option enables support for LEDs driven by the Wolfson
           Microelectronics WM8350 AudioPlus PMIC.
 
 config LEDS_DA903X
         tristate "LED Support for DA9030/DA9034 PMIC"
-        depends on LEDS_CLASS && PMIC_DA903X
+        depends on PMIC_DA903X
         help
           This option enables support for on-chip LED drivers found
           on Dialog Semiconductor DA9030/DA9034 PMICs.
 
 config LEDS_DAC124S085
         tristate "LED Support for DAC124S085 SPI DAC"
-        depends on LEDS_CLASS && SPI
+        depends on SPI
         help
           This option enables support for DAC124S085 SPI DAC from NatSemi,
           which can be used to control up to four LEDs.
 
 config LEDS_PWM
         tristate "PWM driven LED Support"
-        depends on LEDS_CLASS && HAVE_PWM
+        depends on HAVE_PWM
         help
           This option enables support for pwm driven LEDs
 
 config LEDS_REGULATOR
         tristate "REGULATOR driven LED support"
-        depends on LEDS_CLASS && REGULATOR
+        depends on REGULATOR
         help
           This option enables support for regulator driven LEDs.
 
 config LEDS_BD2802
         tristate "LED driver for BD2802 RGB LED"
-        depends on LEDS_CLASS && I2C
+        depends on I2C
         help
           This option enables support for BD2802GU RGB LED driver chips
           accessed via the I2C bus.
 
 config LEDS_INTEL_SS4200
         tristate "LED driver for Intel NAS SS4200 series"
-        depends on LEDS_CLASS && PCI && DMI
+        depends on PCI && DMI
         help
           This option enables support for the Intel SS4200 series of
           Network Attached Storage servers.  You may control the hard
@@ -260,7 +262,7 @@ config LEDS_INTEL_SS4200
 
 config LEDS_LT3593
         tristate "LED driver for LT3593 controllers"
-        depends on LEDS_CLASS && GENERIC_GPIO
+        depends on GENERIC_GPIO
         help
           This option enables support for LEDs driven by a Linear Technology
           LT3593 controller. This controller uses a special one-wire pulse
@@ -268,7 +270,7 @@ config LEDS_LT3593
 
 config LEDS_ADP5520
         tristate "LED Support for ADP5520/ADP5501 PMIC"
-        depends on LEDS_CLASS && PMIC_ADP5520
+        depends on PMIC_ADP5520
         help
           This option enables support for on-chip LED drivers found
           on Analog Devices ADP5520/ADP5501 PMICs.
@@ -276,8 +278,6 @@ config LEDS_ADP5520
           To compile this driver as a module, choose M here: the module will
           be called leds-adp5520.
 
-comment "LED Triggers"
-
 config LEDS_TRIGGERS
         bool "LED Trigger support"
         help
@@ -285,9 +285,12 @@ config LEDS_TRIGGERS
           These triggers allow kernel events to drive the LEDs and can
           be configured via sysfs. If unsure, say Y.
 
+if LEDS_TRIGGERS
+
+comment "LED Triggers"
+
 config LEDS_TRIGGER_TIMER
         tristate "LED Timer Trigger"
-        depends on LEDS_TRIGGERS
         help
           This allows LEDs to be controlled by a programmable timer
           via sysfs. Some LED hardware can be programmed to start
@@ -298,14 +301,13 @@ config LEDS_TRIGGER_TIMER
 
 config LEDS_TRIGGER_IDE_DISK
         bool "LED IDE Disk Trigger"
-        depends on LEDS_TRIGGERS && IDE_GD_ATA
+        depends on IDE_GD_ATA
         help
           This allows LEDs to be controlled by IDE disk activity.
           If unsure, say Y.
 
 config LEDS_TRIGGER_HEARTBEAT
         tristate "LED Heartbeat Trigger"
-        depends on LEDS_TRIGGERS
         help
           This allows LEDs to be controlled by a CPU load average.
           The flash frequency is a hyperbolic function of the 1-minute
@@ -314,7 +316,6 @@ config LEDS_TRIGGER_HEARTBEAT
 
 config LEDS_TRIGGER_BACKLIGHT
         tristate "LED backlight Trigger"
-        depends on LEDS_TRIGGERS
         help
           This allows LEDs to be controlled as a backlight device: they
           turn off and on when the display is blanked and unblanked.
@@ -323,7 +324,6 @@ config LEDS_TRIGGER_BACKLIGHT
 
 config LEDS_TRIGGER_GPIO
         tristate "LED GPIO Trigger"
-        depends on LEDS_TRIGGERS
         depends on GPIOLIB
         help
           This allows LEDs to be controlled by gpio events. It's good
@@ -336,7 +336,6 @@ config LEDS_TRIGGER_GPIO
 
 config LEDS_TRIGGER_DEFAULT_ON
         tristate "LED Default ON Trigger"
-        depends on LEDS_TRIGGERS
         help
           This allows LEDs to be initialised in the ON state.
           If unsure, say Y.
@@ -344,4 +343,8 @@ config LEDS_TRIGGER_DEFAULT_ON
 comment "iptables trigger is under Netfilter config (LED target)"
         depends on LEDS_TRIGGERS
 
+endif # LEDS_TRIGGERS
+
+endif # LEDS_CLASS
+
 endif # NEW_LEDS