Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 147 insertions, 0 deletions

diff --git a/drivers/isdn/sc/timer.c b/drivers/isdn/sc/timer.c
new file mode 100644
index 000000000000..710d0f47ca35
--- /dev/null
+++ b/drivers/isdn/sc/timer.c
@@ -0,0 +1,147 @@
+/* $Id: timer.c,v 1.3.6.1 2001/09/23 22:24:59 kai Exp $
+ *
+ * Copyright (C) 1996  SpellCaster Telecommunications Inc.
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ * For more information, please contact gpl-info@spellcast.com or write:
+ *
+ *     SpellCaster Telecommunications Inc.
+ *     5621 Finch Avenue East, Unit #3
+ *     Scarborough, Ontario  Canada
+ *     M1B 2T9
+ *     +1 (416) 297-8565
+ *     +1 (416) 297-6433 Facsimile
+ */
+
+#include "includes.h"
+#include "hardware.h"
+#include "message.h"
+#include "card.h"
+
+extern board *sc_adapter[];
+
+extern void flushreadfifo(int);
+extern int  startproc(int);
+extern int  indicate_status(int, int, unsigned long, char *);
+extern int  sendmessage(int, unsigned int, unsigned int, unsigned int,
+        unsigned int, unsigned int, unsigned int, unsigned int *);
+
+
+/*
+ * Write the proper values into the I/O ports following a reset
+ */
+void setup_ports(int card)
+{
+
+        outb((sc_adapter[card]->rambase >> 12), sc_adapter[card]->ioport[EXP_BASE]);
+
+        /* And the IRQ */
+        outb((sc_adapter[card]->interrupt | 0x80),
+                sc_adapter[card]->ioport[IRQ_SELECT]);
+}
+
+/*
+ * Timed function to check the status of a previous reset
+ * Must be very fast as this function runs in the context of
+ * an interrupt handler.
+ *
+ * Setup the ioports for the board that were cleared by the reset.
+ * Then, check to see if the signate has been set. Next, set the
+ * signature to a known value and issue a startproc if needed.
+ */
+void check_reset(unsigned long data)
+{
+        unsigned long flags;
+        unsigned long sig;
+        int card = (unsigned int) data;
+
+        pr_debug("%s: check_timer timer called\n",
+                sc_adapter[card]->devicename);
+
+        /* Setup the io ports */
+        setup_ports(card);
+
+        spin_lock_irqsave(&sc_adapter[card]->lock, flags);
+        outb(sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport],
+                (sc_adapter[card]->shmem_magic>>14) | 0x80);
+        sig = (unsigned long) *((unsigned long *)(sc_adapter[card]->rambase + SIG_OFFSET));
+
+        /* check the signature */
+        if(sig == SIGNATURE) {
+                flushreadfifo(card);
+                spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
+                /* See if we need to do a startproc */
+                if (sc_adapter[card]->StartOnReset)
+                        startproc(card);
+        } else  {
+                pr_debug("%s: No signature yet, waiting another %d jiffies.\n", 
+                        sc_adapter[card]->devicename, CHECKRESET_TIME);
+                mod_timer(&sc_adapter[card]->reset_timer, jiffies+CHECKRESET_TIME);
+                spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
+        }
+}
+
+/*
+ * Timed function to check the status of a previous reset
+ * Must be very fast as this function runs in the context of
+ * an interrupt handler.
+ *
+ * Send check sc_adapter->phystat to see if the channels are up
+ * If they are, tell ISDN4Linux that the board is up. If not,
+ * tell IADN4Linux that it is up. Always reset the timer to
+ * fire again (endless loop).
+ */
+void check_phystat(unsigned long data)
+{
+        unsigned long flags;
+        int card = (unsigned int) data;
+
+        pr_debug("%s: Checking status...\n", sc_adapter[card]->devicename);
+        /* 
+         * check the results of the last PhyStat and change only if
+         * has changed drastically
+         */
+        if (sc_adapter[card]->nphystat && !sc_adapter[card]->phystat) {   /* All is well */
+                pr_debug("PhyStat transition to RUN\n");
+                pr_info("%s: Switch contacted, transmitter enabled\n", 
+                        sc_adapter[card]->devicename);
+                indicate_status(card, ISDN_STAT_RUN, 0, NULL);
+        }
+        else if (!sc_adapter[card]->nphystat && sc_adapter[card]->phystat) {   /* All is not well */
+                pr_debug("PhyStat transition to STOP\n");
+                pr_info("%s: Switch connection lost, transmitter disabled\n", 
+                        sc_adapter[card]->devicename);
+
+                indicate_status(card, ISDN_STAT_STOP, 0, NULL);
+        }
+
+        sc_adapter[card]->phystat = sc_adapter[card]->nphystat;
+
+        /* Reinitialize the timer */
+        spin_lock_irqsave(&sc_adapter[card]->lock, flags);
+        mod_timer(&sc_adapter[card]->stat_timer, jiffies+CHECKSTAT_TIME);
+        spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
+
+        /* Send a new cePhyStatus message */
+        sendmessage(card, CEPID,ceReqTypePhy,ceReqClass2,
+                ceReqPhyStatus,0,0,NULL);
+}
+
+/*
+ * When in trace mode, this callback is used to swap the working shared
+ * RAM page to the trace page(s) and process all received messages. It
+ * must be called often enough to get all of the messages out of RAM before
+ * it loops around.
+ * Trace messages are \n terminated strings.
+ * We output the messages in 64 byte chunks through readstat. Each chunk
+ * is scanned for a \n followed by a time stamp. If the timerstamp is older
+ * than the current time, scanning stops and the page and offset are recorded
+ * as the starting point the next time the trace timer is called. The final
+ * step is to restore the working page and reset the timer.
+ */
+void trace_timer(unsigned long data)
+{
+        /* not implemented */
+}