Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 442 insertions, 0 deletions

diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
new file mode 100644
index 000000000000..6c7b8bffc6fd
--- /dev/null
+++ b/drivers/isdn/hisax/Kconfig
@@ -0,0 +1,442 @@
+
+menu "Passive cards"
+        depends on ISDN_I4L
+
+config ISDN_DRV_HISAX
+        tristate "HiSax SiemensChipSet driver support"
+        select CRC_CCITT
+        ---help---
+          This is a driver supporting the Siemens chipset on various
+          ISDN-cards (like AVM A1, Elsa ISDN cards, Teles S0-16.0, Teles
+          S0-16.3, Teles S0-8, Teles/Creatix PnP, ITK micro ix1 and many
+          compatibles).
+
+          HiSax is just the name of this driver, not the name of any hardware.
+
+          If you have a card with such a chipset, you should say Y here and
+          also to the configuration option of the driver for your particular
+          card, below.
+
+if ISDN_DRV_HISAX!=n
+
+comment "D-channel protocol features"
+
+config HISAX_EURO
+        bool "HiSax Support for EURO/DSS1"
+        help
+          Say Y or N according to the D-channel protocol which your local
+          telephone service company provides.
+
+          The call control protocol E-DSS1 is used in most European countries.
+          If unsure, say Y.
+
+config DE_AOC
+        bool "Support for german chargeinfo"
+        depends on HISAX_EURO
+        help
+          If you want that the HiSax hardware driver sends messages to the
+          upper level of the isdn code on each AOCD (Advice Of Charge, During
+          the call -- transmission of the fee information during a call) and
+          on each AOCE (Advice Of Charge, at the End of the call --
+          transmission of fee information at the end of the call), say Y here.
+          This works only in Germany.
+
+config HISAX_NO_SENDCOMPLETE
+        bool "Disable sending complete"
+        depends on HISAX_EURO
+        help
+          If you have trouble with some ugly exchanges or you live in
+          Australia select this option.
+
+config HISAX_NO_LLC
+        bool "Disable sending low layer compatibility"
+        depends on HISAX_EURO
+        help
+          If you have trouble with some ugly exchanges try to select this
+          option.
+
+config HISAX_NO_KEYPAD
+        bool "Disable keypad protocol option"
+        depends on HISAX_EURO
+        help
+          If you like to send special dial strings including * or # without
+          using the keypad protocol, select this option.
+
+config HISAX_1TR6
+        bool "HiSax Support for german 1TR6"
+        help
+          Say Y or N according to the D-channel protocol which your local
+          telephone service company provides.
+
+          1TR6 is an old call control protocol which was used in Germany
+          before E-DSS1 was established. Nowadays, all new lines in Germany
+          use E-DSS1.
+
+config HISAX_NI1
+        bool "HiSax Support for US NI1"
+        help
+          Enable this if you like to use ISDN in US on a NI1 basic rate
+          interface.
+
+config HISAX_MAX_CARDS
+        int "Maximum number of cards supported by HiSax"
+        default "8"
+        help
+          This option allows you to specify the maximum number of cards which
+          the HiSax driver will be able to handle.  
+
+comment "HiSax supported cards"
+
+config HISAX_16_0
+        bool "Teles 16.0/8.0"
+        depends on ISA
+        help
+          This enables HiSax support for the Teles ISDN-cards S0-16.0, S0-8
+          and many compatibles.
+
+          See <file:Documentation/isdn/README.HiSax> on how to configure it
+          using the different cards, a different D-channel protocol, or
+          non-standard IRQ/port/shmem settings.
+
+config HISAX_16_3
+        bool "Teles 16.3 or PNP or PCMCIA"
+        help
+          This enables HiSax support for the Teles ISDN-cards S0-16.3 the
+          Teles/Creatix PnP and the Teles PCMCIA.
+
+          See <file:Documentation/isdn/README.HiSax> on how to configure it
+          using the different cards, a different D-channel protocol, or
+          non-standard IRQ/port settings.
+
+config HISAX_TELESPCI
+        bool "Teles PCI"
+        depends on PCI && (BROKEN || !(SPARC64 || PPC))
+        help
+          This enables HiSax support for the Teles PCI.
+          See <file:Documentation/isdn/README.HiSax> on how to configure it.
+
+config HISAX_S0BOX
+        bool "Teles S0Box"
+        help
+          This enables HiSax support for the Teles/Creatix parallel port
+          S0BOX.  See <file:Documentation/isdn/README.HiSax> on how to
+          configure it.
+
+config HISAX_AVM_A1
+        bool "AVM A1 (Fritz)"
+        depends on ISA
+        help
+          This enables HiSax support for the AVM A1 (aka "Fritz").
+
+          See <file:Documentation/isdn/README.HiSax> on how to configure it
+          using the different cards, a different D-channel protocol, or
+          non-standard IRQ/port settings.
+
+config HISAX_FRITZPCI
+        bool "AVM PnP/PCI (Fritz!PnP/PCI)"
+        help
+          This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI".
+          See <file:Documentation/isdn/README.HiSax> on how to configure it.
+
+config HISAX_AVM_A1_PCMCIA
+        bool "AVM A1 PCMCIA (Fritz)"
+        help
+          This enables HiSax support for the AVM A1 "Fritz!PCMCIA").
+          See <file:Documentation/isdn/README.HiSax> on how to configure it.
+
+config HISAX_ELSA
+        bool "Elsa cards"
+        help
+          This enables HiSax support for the Elsa Mircolink ISA cards, for the
+          Elsa Quickstep series cards and Elsa PCMCIA.
+
+          See <file:Documentation/isdn/README.HiSax> on how to configure it
+          using the different cards, a different D-channel protocol, or
+          non-standard IRQ/port settings.
+
+config HISAX_IX1MICROR2
+        bool "ITK ix1-micro Revision 2"
+        depends on ISA
+        help
+          This enables HiSax support for the ITK ix1-micro Revision 2 card.
+
+          See <file:Documentation/isdn/README.HiSax> on how to configure it
+          using the different cards, a different D-channel protocol, or
+          non-standard IRQ/port settings.
+
+config HISAX_DIEHLDIVA
+        bool "Eicon.Diehl Diva cards"
+        help
+          This enables HiSax support for the Eicon.Diehl Diva none PRO
+          versions passive ISDN cards.
+
+          See <file:Documentation/isdn/README.HiSax> on how to configure it
+          using the different cards, a different D-channel protocol, or
+          non-standard IRQ/port settings.
+
+config HISAX_ASUSCOM
+        bool "ASUSCOM ISA cards"
+        depends on ISA
+        help
+          This enables HiSax support for the AsusCom and their OEM versions
+          passive ISDN ISA cards.
+
+          See <file:Documentation/isdn/README.HiSax> on how to configure it
+          using the different cards, a different D-channel protocol, or
+          non-standard IRQ/port settings.
+
+config HISAX_TELEINT
+        bool "TELEINT cards"
+        depends on ISA
+        help
+          This enables HiSax support for the TELEINT SA1 semiactiv ISDN card.
+
+          See <file:Documentation/isdn/README.HiSax> on how to configure it
+          using the different cards, a different D-channel protocol, or
+          non-standard IRQ/port settings.
+
+config HISAX_HFCS
+        bool "HFC-S based cards"
+        depends on ISA
+        help
+          This enables HiSax support for the HFC-S 2BDS0 based cards, like
+          teles 16.3c.
+
+          See <file:Documentation/isdn/README.HiSax> on how to configure it
+          using the different cards, a different D-channel protocol, or
+          non-standard IRQ/port settings.
+
+config HISAX_SEDLBAUER
+        bool "Sedlbauer cards"
+        help
+          This enables HiSax support for the Sedlbauer passive ISDN cards.
+
+          See <file:Documentation/isdn/README.HiSax> on how to configure it
+          using the different cards, a different D-channel protocol, or
+          non-standard IRQ/port settings.
+
+config HISAX_SPORTSTER
+        bool "USR Sportster internal TA"
+        depends on ISA
+        help
+          This enables HiSax support for the USR Sportster internal TA card.
+
+          See <file:Documentation/isdn/README.HiSax> on how to configure it
+          using a different D-channel protocol, or non-standard IRQ/port
+          settings.
+
+config HISAX_MIC
+        bool "MIC card"
+        depends on ISA
+        help
+          This enables HiSax support for the ITH MIC card.
+
+          See <file:Documentation/isdn/README.HiSax> on how to configure it
+          using a different D-channel protocol, or non-standard IRQ/port
+          settings.
+
+config HISAX_NETJET
+        bool "NETjet card"
+        depends on PCI && (BROKEN || !(SPARC64 || PPC))
+        help
+          This enables HiSax support for the NetJet from Traverse
+          Technologies.
+
+          See <file:Documentation/isdn/README.HiSax> on how to configure it
+          using a different D-channel protocol, or non-standard IRQ/port
+          settings.
+
+config HISAX_NETJET_U
+        bool "NETspider U card"
+        depends on PCI && (BROKEN || !(SPARC64 || PPC))
+        help
+          This enables HiSax support for the Netspider U interface ISDN card
+          from Traverse Technologies.
+          See <file:Documentation/isdn/README.HiSax> on how to configure it
+          using a different D-channel protocol, or non-standard IRQ/port
+          settings.
+
+config HISAX_NICCY
+        bool "Niccy PnP/PCI card"
+        help
+          This enables HiSax support for the Dr. Neuhaus Niccy PnP or PCI.
+
+          See <file:Documentation/isdn/README.HiSax> on how to configure it
+          using a different D-channel protocol, or non-standard IRQ/port
+          settings.
+
+config HISAX_ISURF
+        bool "Siemens I-Surf card"
+        depends on ISA
+        help
+          This enables HiSax support for the Siemens I-Talk/I-Surf card with
+          ISAR chip.
+          See <file:Documentation/isdn/README.HiSax> on how to configure it
+          using a different D-channel protocol, or non-standard IRQ/port
+          settings.
+
+config HISAX_HSTSAPHIR
+        bool "HST Saphir card"
+        depends on ISA
+        help
+          This enables HiSax support for the HST Saphir card.
+
+          See <file:Documentation/isdn/README.HiSax> on how to configure it
+          using a different D-channel protocol, or non-standard IRQ/port
+          settings.
+
+config HISAX_BKM_A4T
+        bool "Telekom A4T card"
+        depends on PCI
+        help
+          This enables HiSax support for the Telekom A4T card.
+
+          See <file:Documentation/isdn/README.HiSax> on how to configure it
+          using a different D-channel protocol, or non-standard IRQ/port
+          settings.
+
+config HISAX_SCT_QUADRO
+        bool "Scitel Quadro card"
+        depends on PCI
+        help
+          This enables HiSax support for the Scitel Quadro card.
+
+          See <file:Documentation/isdn/README.HiSax> on how to configure it
+          using a different D-channel protocol, or non-standard IRQ/port
+          settings.
+
+config HISAX_GAZEL
+        bool "Gazel cards"
+        help
+          This enables HiSax support for the Gazel cards.
+
+          See <file:Documentation/isdn/README.HiSax> on how to configure it
+          using a different D-channel protocol, or non-standard IRQ/port
+          settings.
+
+config HISAX_HFC_PCI
+        bool "HFC PCI-Bus cards"
+        depends on PCI && (BROKEN || !(SPARC64 || PPC))
+        help
+          This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
+
+          For more informations see under
+          <file:Documentation/isdn/README.hfc-pci>.
+
+config HISAX_W6692
+        bool "Winbond W6692 based cards"
+        depends on PCI
+        help
+          This enables HiSax support for Winbond W6692 based PCI ISDN cards.
+
+          See <file:Documentation/isdn/README.HiSax> on how to configure it
+          using a different D-channel protocol, or non-standard IRQ/port
+          settings.
+
+config HISAX_HFC_SX
+        bool "HFC-S+, HFC-SP, HFC-PCMCIA cards"
+        help
+          This enables HiSax support for the HFC-S+, HFC-SP and HFC-PCMCIA
+          cards. This code is not finished yet.
+
+#      bool '  TESTEMULATOR (EXPERIMENTAL)' CONFIG_HISAX_TESTEMU
+
+config HISAX_ENTERNOW_PCI
+        bool "Formula-n enter:now PCI card"
+        depends on PCI && (BROKEN || !(SPARC64 || PPC))
+        help
+          This enables HiSax support for the Formula-n enter:now PCI
+          ISDN card.
+
+config HISAX_AMD7930
+        bool "Am7930 (EXPERIMENTAL)"
+        depends on EXPERIMENTAL && (SPARC32 || SPARC64)
+        help
+          This enables HiSax support for the AMD7930 chips on some SPARCs.
+          This code is not finished yet.
+
+endif
+
+if ISDN_DRV_HISAX
+
+config HISAX_DEBUG
+        bool "HiSax debugging"
+        help
+          This enables debugging code in the new-style HiSax drivers, i.e.
+          the ST5481 USB driver currently. 
+          If in doubt, say yes.
+
+comment "HiSax PCMCIA card service modules"
+
+config HISAX_SEDLBAUER_CS
+        tristate "Sedlbauer PCMCIA cards"
+        depends on PCMCIA && HISAX_SEDLBAUER
+        help
+          This enables the PCMCIA client driver for the Sedlbauer Speed Star
+          and Speed Star II cards.
+
+config HISAX_ELSA_CS
+        tristate "ELSA PCMCIA MicroLink cards"
+        depends on PCMCIA && HISAX_ELSA
+        help
+          This enables the PCMCIA client driver for the Elsa PCMCIA MicroLink
+          card.
+
+config HISAX_AVM_A1_CS
+        tristate "AVM A1 PCMCIA cards"
+        depends on PCMCIA && ISDN_DRV_HISAX
+        help
+          This enables the PCMCIA client driver for the AVM A1 / Fritz!Card
+          PCMCIA cards.
+
+config HISAX_TELES_CS
+        tristate "TELES PCMCIA cards"
+        depends on PCMCIA && HISAX_16_3
+        help
+          This enables the PCMCIA client driver for the Teles PCMCIA cards.
+
+comment "HiSax sub driver modules"
+
+config HISAX_ST5481
+        tristate "ST5481 USB ISDN modem (EXPERIMENTAL)"
+        depends on USB && EXPERIMENTAL
+        select CRC_CCITT
+        help
+          This enables the driver for ST5481 based USB ISDN adapters,
+          e.g. the BeWan Gazel 128 USB
+
+config HISAX_HFCUSB
+        tristate "HFC USB based ISDN modems (EXPERIMENTAL)"
+        depends on USB && EXPERIMENTAL
+        help
+          This enables the driver for HFC USB based ISDN modems.
+
+config HISAX_HFC4S8S
+        tristate "HFC-4S/8S based ISDN cards (EXPERIMENTAL)"
+        depends on EXPERIMENTAL
+        help
+          This enables the driver for HFC-4S/8S based ISDN cards.
+
+config HISAX_FRITZ_PCIPNP
+        tristate "AVM Fritz!Card PCI/PCIv2/PnP support (EXPERIMENTAL)"
+        depends on PCI && EXPERIMENTAL
+        help
+          This enables the driver for the AVM Fritz!Card PCI,
+          Fritz!Card PCI v2 and Fritz!Card PnP.
+          (the latter also needs you to select "ISA Plug and Play support"
+          from the menu "Plug and Play configuration")
+
+config HISAX_HDLC
+        bool
+        depends on HISAX_ST5481
+        default y
+
+config HISAX_AVM_A1_PCMCIA
+        bool
+        depends on HISAX_AVM_A1_CS
+        default y
+
+endif
+
+endmenu
+