Add mISDN HFC multiport driver

Enable support for cards with Cologne Chip AG's HFC multiport
chip.

Signed-off-by: Karsten Keil <kkeil@suse.de>

4 files changed, 6537 insertions, 0 deletions

diff --git a/drivers/isdn/hardware/mISDN/Kconfig b/drivers/isdn/hardware/mISDN/Kconfig
index f62dc8752be9..14793480c453 100644
--- a/drivers/isdn/hardware/mISDN/Kconfig
+++ b/drivers/isdn/hardware/mISDN/Kconfig
@@ -11,3 +11,15 @@ config MISDN_HFCPCI
           Enable support for cards with Cologne Chip AG's
           HFC PCI chip.
 
+config MISDN_HFCMULTI
+        tristate "Support for HFC multiport cards (HFC-4S/8S/E1)"
+        depends on PCI
+        depends on MISDN
+        help
+          Enable support for cards with Cologne Chip AG's HFC multiport
+          chip. There are three types of chips that are quite similar,
+          but the interface is different:
+           * HFC-4S (4 S/T interfaces on one chip)
+           * HFC-8S (8 S/T interfaces on one chip)
+           * HFC-E1 (E1 interface for 2Mbit ISDN)
+
diff --git a/drivers/isdn/hardware/mISDN/Makefile b/drivers/isdn/hardware/mISDN/Makefile
index 6f20a40b9d54..1e7ca5332ad7 100644
--- a/drivers/isdn/hardware/mISDN/Makefile
+++ b/drivers/isdn/hardware/mISDN/Makefile
@@ -4,3 +4,4 @@
 #
 
 obj-$(CONFIG_MISDN_HFCPCI) += hfcpci.o
+obj-$(CONFIG_MISDN_HFCMULTI) += hfcmulti.o
diff --git a/drivers/isdn/hardware/mISDN/hfc_multi.h b/drivers/isdn/hardware/mISDN/hfc_multi.h
new file mode 100644
index 000000000000..a33d87afc843
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/hfc_multi.h
@@ -0,0 +1,1204 @@
+/*
+ * see notice in hfc_multi.c
+ */
+
+extern void ztdummy_extern_interrupt(void);
+extern void ztdummy_register_interrupt(void);
+extern int ztdummy_unregister_interrupt(void);
+
+#define DEBUG_HFCMULTI_FIFO     0x00010000
+#define DEBUG_HFCMULTI_CRC      0x00020000
+#define DEBUG_HFCMULTI_INIT     0x00040000
+#define DEBUG_HFCMULTI_PLXSD    0x00080000
+#define DEBUG_HFCMULTI_MODE     0x00100000
+#define DEBUG_HFCMULTI_MSG      0x00200000
+#define DEBUG_HFCMULTI_STATE    0x00400000
+#define DEBUG_HFCMULTI_SYNC     0x01000000
+#define DEBUG_HFCMULTI_DTMF     0x02000000
+#define DEBUG_HFCMULTI_LOCK     0x80000000
+
+#define PCI_ENA_REGIO   0x01
+#define PCI_ENA_MEMIO   0x02
+
+/*
+ * NOTE: some registers are assigned multiple times due to different modes
+ *       also registers are assigned differen for HFC-4s/8s and HFC-E1
+ */
+
+/*
+#define MAX_FRAME_SIZE  2048
+*/
+
+struct hfc_chan {
+        struct dchannel *dch;   /* link if channel is a D-channel */
+        struct bchannel *bch;   /* link if channel is a B-channel */
+        int             port;   /* the interface port this */
+                                /* channel is associated with */
+        int             nt_timer; /* -1 if off, 0 if elapsed, >0 if running */
+        int             los, ais, slip_tx, slip_rx, rdi; /* current alarms */
+        int             jitter;
+        u_long          cfg;    /* port configuration */
+        int             sync;   /* sync state (used by E1) */
+        u_int           protocol; /* current protocol */
+        int             slot_tx; /* current pcm slot */
+        int             bank_tx; /* current pcm bank */
+        int             slot_rx;
+        int             bank_rx;
+        int             conf;   /* conference setting of TX slot */
+        int             txpending;      /* if there is currently data in */
+                                        /* the FIFO 0=no, 1=yes, 2=splloop */
+        int             rx_off; /* set to turn fifo receive off */
+        int             coeff_count; /* curren coeff block */
+        s32             *coeff; /* memory pointer to 8 coeff blocks */
+};
+
+
+struct hfcm_hw {
+        u_char  r_ctrl;
+        u_char  r_irq_ctrl;
+        u_char  r_cirm;
+        u_char  r_ram_sz;
+        u_char  r_pcm_md0;
+        u_char  r_irqmsk_misc;
+        u_char  r_dtmf;
+        u_char  r_st_sync;
+        u_char  r_sci_msk;
+        u_char  r_tx0, r_tx1;
+        u_char  a_st_ctrl0[8];
+        timer_t timer;
+};
+
+
+/* for each stack these flags are used (cfg) */
+#define HFC_CFG_NONCAP_TX       1 /* S/T TX interface has less capacity */
+#define HFC_CFG_DIS_ECHANNEL    2 /* disable E-channel processing */
+#define HFC_CFG_REG_ECHANNEL    3 /* register E-channel */
+#define HFC_CFG_OPTICAL         4 /* the E1 interface is optical */
+#define HFC_CFG_REPORT_LOS      5 /* the card should report loss of signal */
+#define HFC_CFG_REPORT_AIS      6 /* the card should report alarm ind. sign. */
+#define HFC_CFG_REPORT_SLIP     7 /* the card should report bit slips */
+#define HFC_CFG_REPORT_RDI      8 /* the card should report remote alarm */
+#define HFC_CFG_DTMF            9 /* enable DTMF-detection */
+#define HFC_CFG_CRC4            10 /* disable CRC-4 Multiframe mode, */
+                                        /* use double frame instead. */
+
+#define HFC_CHIP_EXRAM_128      0 /* external ram 128k */
+#define HFC_CHIP_EXRAM_512      1 /* external ram 256k */
+#define HFC_CHIP_REVISION0      2 /* old fifo handling */
+#define HFC_CHIP_PCM_SLAVE      3 /* PCM is slave */
+#define HFC_CHIP_PCM_MASTER     4 /* PCM is master */
+#define HFC_CHIP_RX_SYNC        5 /* disable pll sync for pcm */
+#define HFC_CHIP_DTMF           6 /* DTMF decoding is enabled */
+#define HFC_CHIP_ULAW           7 /* ULAW mode */
+#define HFC_CHIP_CLOCK2         8 /* double clock mode */
+#define HFC_CHIP_E1CLOCK_GET    9 /* always get clock from E1 interface */
+#define HFC_CHIP_E1CLOCK_PUT    10 /* always put clock from E1 interface */
+#define HFC_CHIP_WATCHDOG       11 /* whether we should send signals */
+                                        /* to the watchdog */
+#define HFC_CHIP_B410P          12 /* whether we have a b410p with echocan in */
+                                        /* hw */
+#define HFC_CHIP_PLXSD          13 /* whether we have a Speech-Design PLX */
+
+#define HFC_IO_MODE_PCIMEM      0x00 /* normal memory mapped IO */
+#define HFC_IO_MODE_REGIO       0x01 /* PCI io access */
+#define HFC_IO_MODE_PLXSD       0x02 /* access HFC via PLX9030 */
+
+/* table entry in the PCI devices list */
+struct hm_map {
+        char *vendor_name;
+        char *card_name;
+        int type;
+        int ports;
+        int clock2;
+        int leds;
+        int opticalsupport;
+        int dip_type;
+        int io_mode;
+};
+
+struct hfc_multi {
+        struct list_head        list;
+        struct hm_map   *mtyp;
+        int             id;
+        int             pcm;    /* id of pcm bus */
+        int             type;
+        int             ports;
+
+        u_int           irq;    /* irq used by card */
+        u_int           irqcnt;
+        struct pci_dev  *pci_dev;
+        int             io_mode; /* selects mode */
+#ifdef HFC_REGISTER_DEBUG
+        void            (*HFC_outb)(struct hfc_multi *hc, u_char reg,
+                                u_char val, const char *function, int line);
+        void            (*HFC_outb_nodebug)(struct hfc_multi *hc, u_char reg,
+                                u_char val, const char *function, int line);
+        u_char          (*HFC_inb)(struct hfc_multi *hc, u_char reg,
+                                const char *function, int line);
+        u_char          (*HFC_inb_nodebug)(struct hfc_multi *hc, u_char reg,
+                                const char *function, int line);
+        u_short         (*HFC_inw)(struct hfc_multi *hc, u_char reg,
+                                const char *function, int line);
+        u_short         (*HFC_inw_nodebug)(struct hfc_multi *hc, u_char reg,
+                                const char *function, int line);
+        void            (*HFC_wait)(struct hfc_multi *hc,
+                                const char *function, int line);
+        void            (*HFC_wait_nodebug)(struct hfc_multi *hc,
+                                const char *function, int line);
+#else
+        void            (*HFC_outb)(struct hfc_multi *hc, u_char reg,
+                                u_char val);
+        void            (*HFC_outb_nodebug)(struct hfc_multi *hc, u_char reg,
+                                u_char val);
+        u_char          (*HFC_inb)(struct hfc_multi *hc, u_char reg);
+        u_char          (*HFC_inb_nodebug)(struct hfc_multi *hc, u_char reg);
+        u_short         (*HFC_inw)(struct hfc_multi *hc, u_char reg);
+        u_short         (*HFC_inw_nodebug)(struct hfc_multi *hc, u_char reg);
+        void            (*HFC_wait)(struct hfc_multi *hc);
+        void            (*HFC_wait_nodebug)(struct hfc_multi *hc);
+#endif
+        void            (*read_fifo)(struct hfc_multi *hc, u_char *data,
+                                int len);
+        void            (*write_fifo)(struct hfc_multi *hc, u_char *data,
+                                int len);
+        u_long          pci_origmembase, plx_origmembase, dsp_origmembase;
+        u_char          *pci_membase; /* PCI memory (MUST BE BYTE POINTER) */
+        u_char          *plx_membase; /* PLX memory */
+        u_char          *dsp_membase; /* DSP on PLX */
+        u_long          pci_iobase; /* PCI IO */
+        struct hfcm_hw  hw;     /* remember data of write-only-registers */
+
+        u_long          chip;   /* chip configuration */
+        int             masterclk; /* port that provides master clock -1=off */
+        int             dtmf;   /* flag that dtmf is currently in process */
+        int             Flen;   /* F-buffer size */
+        int             Zlen;   /* Z-buffer size (must be int for calculation)*/
+        int             max_trans; /* maximum transparent fifo fill */
+        int             Zmin;   /* Z-buffer offset */
+        int             DTMFbase; /* base address of DTMF coefficients */
+
+        u_int           slots;  /* number of PCM slots */
+        u_int           leds;   /* type of leds */
+        u_int           ledcount; /* used to animate leds */
+        u_long          ledstate; /* save last state of leds */
+        int             opticalsupport; /* has the e1 board */
+                                        /* an optical Interface */
+        int             dslot;  /* channel # of d-channel (E1) default 16 */
+
+        u_long          wdcount;        /* every 500 ms we need to */
+                                        /* send the watchdog a signal */
+        u_char          wdbyte; /* watchdog toggle byte */
+        u_int           activity[8];    /* if there is any action on this */
+                                        /* port (will be cleared after */
+                                        /* showing led-states) */
+        int             e1_state; /* keep track of last state */
+        int             e1_getclock; /* if sync is retrieved from interface */
+        int             syncronized; /* keep track of existing sync interface */
+        int             e1_resync; /* resync jobs */
+
+        spinlock_t      lock;   /* the lock */
+
+        /*
+         * the channel index is counted from 0, regardless where the channel
+         * is located on the hfc-channel.
+         * the bch->channel is equvalent to the hfc-channel
+         */
+        struct hfc_chan chan[32];
+        u_char          created[8]; /* what port is created */
+        signed char     slot_owner[256]; /* owner channel of slot */
+};
+
+/* PLX GPIOs */
+#define PLX_GPIO4_DIR_BIT       13
+#define PLX_GPIO4_BIT           14
+#define PLX_GPIO5_DIR_BIT       16
+#define PLX_GPIO5_BIT           17
+#define PLX_GPIO6_DIR_BIT       19
+#define PLX_GPIO6_BIT           20
+#define PLX_GPIO7_DIR_BIT       22
+#define PLX_GPIO7_BIT           23
+#define PLX_GPIO8_DIR_BIT       25
+#define PLX_GPIO8_BIT           26
+
+#define PLX_GPIO4               (1 << PLX_GPIO4_BIT)
+#define PLX_GPIO5               (1 << PLX_GPIO5_BIT)
+#define PLX_GPIO6               (1 << PLX_GPIO6_BIT)
+#define PLX_GPIO7               (1 << PLX_GPIO7_BIT)
+#define PLX_GPIO8               (1 << PLX_GPIO8_BIT)
+
+#define PLX_GPIO4_DIR           (1 << PLX_GPIO4_DIR_BIT)
+#define PLX_GPIO5_DIR           (1 << PLX_GPIO5_DIR_BIT)
+#define PLX_GPIO6_DIR           (1 << PLX_GPIO6_DIR_BIT)
+#define PLX_GPIO7_DIR           (1 << PLX_GPIO7_DIR_BIT)
+#define PLX_GPIO8_DIR           (1 << PLX_GPIO8_DIR_BIT)
+
+#define PLX_TERM_ON                     PLX_GPIO7
+#define PLX_SLAVE_EN_N          PLX_GPIO5
+#define PLX_MASTER_EN           PLX_GPIO6
+#define PLX_SYNC_O_EN           PLX_GPIO4
+#define PLX_DSP_RES_N           PLX_GPIO8
+/* GPIO4..8 Enable & Set to OUT, SLAVE_EN_N = 1 */
+#define PLX_GPIOC_INIT          (PLX_GPIO4_DIR | PLX_GPIO5_DIR | PLX_GPIO6_DIR \
+                        | PLX_GPIO7_DIR | PLX_GPIO8_DIR | PLX_SLAVE_EN_N)
+
+/* PLX Interrupt Control/STATUS */
+#define PLX_INTCSR_LINTI1_ENABLE 0x01
+#define PLX_INTCSR_LINTI1_STATUS 0x04
+#define PLX_INTCSR_LINTI2_ENABLE 0x08
+#define PLX_INTCSR_LINTI2_STATUS 0x20
+#define PLX_INTCSR_PCIINT_ENABLE 0x40
+
+/* PLX Registers */
+#define PLX_INTCSR 0x4c
+#define PLX_CNTRL  0x50
+#define PLX_GPIOC  0x54
+
+
+/*
+ * REGISTER SETTING FOR HFC-4S/8S AND HFC-E1
+ */
+
+/* write only registers */
+#define R_CIRM                  0x00
+#define R_CTRL                  0x01
+#define R_BRG_PCM_CFG           0x02
+#define R_RAM_ADDR0             0x08
+#define R_RAM_ADDR1             0x09
+#define R_RAM_ADDR2             0x0A
+#define R_FIRST_FIFO            0x0B
+#define R_RAM_SZ                0x0C
+#define R_FIFO_MD               0x0D
+#define R_INC_RES_FIFO          0x0E
+#define R_FSM_IDX               0x0F
+#define R_FIFO                  0x0F
+#define R_SLOT                  0x10
+#define R_IRQMSK_MISC           0x11
+#define R_SCI_MSK               0x12
+#define R_IRQ_CTRL              0x13
+#define R_PCM_MD0               0x14
+#define R_PCM_MD1               0x15
+#define R_PCM_MD2               0x15
+#define R_SH0H                  0x15
+#define R_SH1H                  0x15
+#define R_SH0L                  0x15
+#define R_SH1L                  0x15
+#define R_SL_SEL0               0x15
+#define R_SL_SEL1               0x15
+#define R_SL_SEL2               0x15
+#define R_SL_SEL3               0x15
+#define R_SL_SEL4               0x15
+#define R_SL_SEL5               0x15
+#define R_SL_SEL6               0x15
+#define R_SL_SEL7               0x15
+#define R_ST_SEL                0x16
+#define R_ST_SYNC               0x17
+#define R_CONF_EN               0x18
+#define R_TI_WD                 0x1A
+#define R_BERT_WD_MD            0x1B
+#define R_DTMF                  0x1C
+#define R_DTMF_N                0x1D
+#define R_E1_WR_STA             0x20
+#define R_E1_RD_STA             0x20
+#define R_LOS0                  0x22
+#define R_LOS1                  0x23
+#define R_RX0                   0x24
+#define R_RX_FR0                0x25
+#define R_RX_FR1                0x26
+#define R_TX0                   0x28
+#define R_TX1                   0x29
+#define R_TX_FR0                0x2C
+
+#define R_TX_FR1                0x2D
+#define R_TX_FR2                0x2E
+#define R_JATT_ATT              0x2F /* undocumented */
+#define A_ST_RD_STATE           0x30
+#define A_ST_WR_STATE           0x30
+#define R_RX_OFF                0x30
+#define A_ST_CTRL0              0x31
+#define R_SYNC_OUT              0x31
+#define A_ST_CTRL1              0x32
+#define A_ST_CTRL2              0x33
+#define A_ST_SQ_WR              0x34
+#define R_TX_OFF                0x34
+#define R_SYNC_CTRL             0x35
+#define A_ST_CLK_DLY            0x37
+#define R_PWM0                  0x38
+#define R_PWM1                  0x39
+#define A_ST_B1_TX              0x3C
+#define A_ST_B2_TX              0x3D
+#define A_ST_D_TX               0x3E
+#define R_GPIO_OUT0             0x40
+#define R_GPIO_OUT1             0x41
+#define R_GPIO_EN0              0x42
+#define R_GPIO_EN1              0x43
+#define R_GPIO_SEL              0x44
+#define R_BRG_CTRL              0x45
+#define R_PWM_MD                0x46
+#define R_BRG_MD                0x47
+#define R_BRG_TIM0              0x48
+#define R_BRG_TIM1              0x49
+#define R_BRG_TIM2              0x4A
+#define R_BRG_TIM3              0x4B
+#define R_BRG_TIM_SEL01         0x4C
+#define R_BRG_TIM_SEL23         0x4D
+#define R_BRG_TIM_SEL45         0x4E
+#define R_BRG_TIM_SEL67         0x4F
+#define A_SL_CFG                0xD0
+#define A_CONF                  0xD1
+#define A_CH_MSK                0xF4
+#define A_CON_HDLC              0xFA
+#define A_SUBCH_CFG             0xFB
+#define A_CHANNEL               0xFC
+#define A_FIFO_SEQ              0xFD
+#define A_IRQ_MSK               0xFF
+
+/* read only registers */
+#define A_Z12                   0x04
+#define A_Z1L                   0x04
+#define A_Z1                    0x04
+#define A_Z1H                   0x05
+#define A_Z2L                   0x06
+#define A_Z2                    0x06
+#define A_Z2H                   0x07
+#define A_F1                    0x0C
+#define A_F12                   0x0C
+#define A_F2                    0x0D
+#define R_IRQ_OVIEW             0x10
+#define R_IRQ_MISC              0x11
+#define R_IRQ_STATECH           0x12
+#define R_CONF_OFLOW            0x14
+#define R_RAM_USE               0x15
+#define R_CHIP_ID               0x16
+#define R_BERT_STA              0x17
+#define R_F0_CNTL               0x18
+#define R_F0_CNTH               0x19
+#define R_BERT_EC               0x1A
+#define R_BERT_ECL              0x1A
+#define R_BERT_ECH              0x1B
+#define R_STATUS                0x1C
+#define R_CHIP_RV               0x1F
+#define R_STATE                 0x20
+#define R_SYNC_STA              0x24
+#define R_RX_SL0_0              0x25
+#define R_RX_SL0_1              0x26
+#define R_RX_SL0_2              0x27
+#define R_JATT_DIR              0x2b /* undocumented */
+#define R_SLIP                  0x2c
+#define A_ST_RD_STA             0x30
+#define R_FAS_EC                0x30
+#define R_FAS_ECL               0x30
+#define R_FAS_ECH               0x31
+#define R_VIO_EC                0x32
+#define R_VIO_ECL               0x32
+#define R_VIO_ECH               0x33
+#define A_ST_SQ_RD              0x34
+#define R_CRC_EC                0x34
+#define R_CRC_ECL               0x34
+#define R_CRC_ECH               0x35
+#define R_E_EC                  0x36
+#define R_E_ECL                 0x36
+#define R_E_ECH                 0x37
+#define R_SA6_SA13_EC           0x38
+#define R_SA6_SA13_ECL          0x38
+#define R_SA6_SA13_ECH          0x39
+#define R_SA6_SA23_EC           0x3A
+#define R_SA6_SA23_ECL          0x3A
+#define R_SA6_SA23_ECH          0x3B
+#define A_ST_B1_RX              0x3C
+#define A_ST_B2_RX              0x3D
+#define A_ST_D_RX               0x3E
+#define A_ST_E_RX               0x3F
+#define R_GPIO_IN0              0x40
+#define R_GPIO_IN1              0x41
+#define R_GPI_IN0               0x44
+#define R_GPI_IN1               0x45
+#define R_GPI_IN2               0x46
+#define R_GPI_IN3               0x47
+#define R_INT_DATA              0x88
+#define R_IRQ_FIFO_BL0          0xC8
+#define R_IRQ_FIFO_BL1          0xC9
+#define R_IRQ_FIFO_BL2          0xCA
+#define R_IRQ_FIFO_BL3          0xCB
+#define R_IRQ_FIFO_BL4          0xCC
+#define R_IRQ_FIFO_BL5          0xCD
+#define R_IRQ_FIFO_BL6          0xCE
+#define R_IRQ_FIFO_BL7          0xCF
+
+/* read and write registers */
+#define A_FIFO_DATA0            0x80
+#define A_FIFO_DATA1            0x80
+#define A_FIFO_DATA2            0x80
+#define A_FIFO_DATA0_NOINC      0x84
+#define A_FIFO_DATA1_NOINC      0x84
+#define A_FIFO_DATA2_NOINC      0x84
+#define R_RAM_DATA              0xC0
+
+
+/*
+ * BIT SETTING FOR HFC-4S/8S AND HFC-E1
+ */
+
+/* chapter 2: universal bus interface */
+/* R_CIRM */
+#define V_IRQ_SEL               0x01
+#define V_SRES                  0x08
+#define V_HFCRES                0x10
+#define V_PCMRES                0x20
+#define V_STRES                 0x40
+#define V_ETRES                 0x40
+#define V_RLD_EPR               0x80
+/* R_CTRL */
+#define V_FIFO_LPRIO            0x02
+#define V_SLOW_RD               0x04
+#define V_EXT_RAM               0x08
+#define V_CLK_OFF               0x20
+#define V_ST_CLK                0x40
+/* R_RAM_ADDR0 */
+#define V_RAM_ADDR2             0x01
+#define V_ADDR_RES              0x40
+#define V_ADDR_INC              0x80
+/* R_RAM_SZ */
+#define V_RAM_SZ                0x01
+#define V_PWM0_16KHZ            0x10
+#define V_PWM1_16KHZ            0x20
+#define V_FZ_MD                 0x80
+/* R_CHIP_ID */
+#define V_PNP_IRQ               0x01
+#define V_CHIP_ID               0x10
+
+/* chapter 3: data flow */
+/* R_FIRST_FIFO */
+#define V_FIRST_FIRO_DIR        0x01
+#define V_FIRST_FIFO_NUM        0x02
+/* R_FIFO_MD */
+#define V_FIFO_MD               0x01
+#define V_CSM_MD                0x04
+#define V_FSM_MD                0x08
+#define V_FIFO_SZ               0x10
+/* R_FIFO */
+#define V_FIFO_DIR              0x01
+#define V_FIFO_NUM              0x02
+#define V_REV                   0x80
+/* R_SLOT */
+#define V_SL_DIR                0x01
+#define V_SL_NUM                0x02
+/* A_SL_CFG */
+#define V_CH_DIR                0x01
+#define V_CH_SEL                0x02
+#define V_ROUTING               0x40
+/* A_CON_HDLC */
+#define V_IFF                   0x01
+#define V_HDLC_TRP              0x02
+#define V_TRP_IRQ               0x04
+#define V_DATA_FLOW             0x20
+/* A_SUBCH_CFG */
+#define V_BIT_CNT               0x01
+#define V_START_BIT             0x08
+#define V_LOOP_FIFO             0x40
+#define V_INV_DATA              0x80
+/* A_CHANNEL */
+#define V_CH_DIR0               0x01
+#define V_CH_NUM0               0x02
+/* A_FIFO_SEQ */
+#define V_NEXT_FIFO_DIR         0x01
+#define V_NEXT_FIFO_NUM         0x02
+#define V_SEQ_END               0x40
+
+/* chapter 4: FIFO handling and HDLC controller */
+/* R_INC_RES_FIFO */
+#define V_INC_F                 0x01
+#define V_RES_F                 0x02
+#define V_RES_LOST              0x04
+
+/* chapter 5: S/T interface */
+/* R_SCI_MSK */
+#define V_SCI_MSK_ST0           0x01
+#define V_SCI_MSK_ST1           0x02
+#define V_SCI_MSK_ST2           0x04
+#define V_SCI_MSK_ST3           0x08
+#define V_SCI_MSK_ST4           0x10
+#define V_SCI_MSK_ST5           0x20
+#define V_SCI_MSK_ST6           0x40
+#define V_SCI_MSK_ST7           0x80
+/* R_ST_SEL */
+#define V_ST_SEL                0x01
+#define V_MULT_ST               0x08
+/* R_ST_SYNC */
+#define V_SYNC_SEL              0x01
+#define V_AUTO_SYNC             0x08
+/* A_ST_WR_STA */
+#define V_ST_SET_STA            0x01
+#define V_ST_LD_STA             0x10
+#define V_ST_ACT                0x20
+#define V_SET_G2_G3             0x80
+/* A_ST_CTRL0 */
+#define V_B1_EN                 0x01
+#define V_B2_EN                 0x02
+#define V_ST_MD                 0x04
+#define V_D_PRIO                0x08
+#define V_SQ_EN                 0x10
+#define V_96KHZ                 0x20
+#define V_TX_LI                 0x40
+#define V_ST_STOP               0x80
+/* A_ST_CTRL1 */
+#define V_G2_G3_EN              0x01
+#define V_D_HI                  0x04
+#define V_E_IGNO                0x08
+#define V_E_LO                  0x10
+#define V_B12_SWAP              0x80
+/* A_ST_CTRL2 */
+#define V_B1_RX_EN              0x01
+#define V_B2_RX_EN              0x02
+#define V_ST_TRIS               0x40
+/* A_ST_CLK_DLY */
+#define V_ST_CK_DLY             0x01
+#define V_ST_SMPL               0x10
+/* A_ST_D_TX */
+#define V_ST_D_TX               0x40
+/* R_IRQ_STATECH */
+#define V_SCI_ST0               0x01
+#define V_SCI_ST1               0x02
+#define V_SCI_ST2               0x04
+#define V_SCI_ST3               0x08
+#define V_SCI_ST4               0x10
+#define V_SCI_ST5               0x20
+#define V_SCI_ST6               0x40
+#define V_SCI_ST7               0x80
+/* A_ST_RD_STA */
+#define V_ST_STA                0x01
+#define V_FR_SYNC_ST            0x10
+#define V_TI2_EXP               0x20
+#define V_INFO0                 0x40
+#define V_G2_G3                 0x80
+/* A_ST_SQ_RD */
+#define V_ST_SQ                 0x01
+#define V_MF_RX_RDY             0x10
+#define V_MF_TX_RDY             0x80
+/* A_ST_D_RX */
+#define V_ST_D_RX               0x40
+/* A_ST_E_RX */
+#define V_ST_E_RX               0x40
+
+/* chapter 5: E1 interface */
+/* R_E1_WR_STA */
+/* R_E1_RD_STA */
+#define V_E1_SET_STA            0x01
+#define V_E1_LD_STA             0x10
+/* R_RX0 */
+#define V_RX_CODE               0x01
+#define V_RX_FBAUD              0x04
+#define V_RX_CMI                0x08
+#define V_RX_INV_CMI            0x10
+#define V_RX_INV_CLK            0x20
+#define V_RX_INV_DATA           0x40
+#define V_AIS_ITU               0x80
+/* R_RX_FR0 */
+#define V_NO_INSYNC             0x01
+#define V_AUTO_RESYNC           0x02
+#define V_AUTO_RECO             0x04
+#define V_SWORD_COND            0x08
+#define V_SYNC_LOSS             0x10
+#define V_XCRC_SYNC             0x20
+#define V_MF_RESYNC             0x40
+#define V_RESYNC                0x80
+/* R_RX_FR1 */
+#define V_RX_MF                 0x01
+#define V_RX_MF_SYNC            0x02
+#define V_RX_SL0_RAM            0x04
+#define V_ERR_SIM               0x20
+#define V_RES_NMF               0x40
+/* R_TX0 */
+#define V_TX_CODE               0x01
+#define V_TX_FBAUD              0x04
+#define V_TX_CMI_CODE           0x08
+#define V_TX_INV_CMI_CODE       0x10
+#define V_TX_INV_CLK            0x20
+#define V_TX_INV_DATA           0x40
+#define V_OUT_EN                0x80
+/* R_TX1 */
+#define V_INV_CLK               0x01
+#define V_EXCHG_DATA_LI         0x02
+#define V_AIS_OUT               0x04
+#define V_ATX                   0x20
+#define V_NTRI                  0x40
+#define V_AUTO_ERR_RES          0x80
+/* R_TX_FR0 */
+#define V_TRP_FAS               0x01
+#define V_TRP_NFAS              0x02
+#define V_TRP_RAL               0x04
+#define V_TRP_SA                0x08
+/* R_TX_FR1 */
+#define V_TX_FAS                0x01
+#define V_TX_NFAS               0x02
+#define V_TX_RAL                0x04
+#define V_TX_SA                 0x08
+/* R_TX_FR2 */
+#define V_TX_MF                 0x01
+#define V_TRP_SL0               0x02
+#define V_TX_SL0_RAM            0x04
+#define V_TX_E                  0x10
+#define V_NEG_E                 0x20
+#define V_XS12_ON               0x40
+#define V_XS15_ON               0x80
+/* R_RX_OFF */
+#define V_RX_SZ                 0x01
+#define V_RX_INIT               0x04
+/* R_SYNC_OUT */
+#define V_SYNC_E1_RX            0x01
+#define V_IPATS0                0x20
+#define V_IPATS1                0x40
+#define V_IPATS2                0x80
+/* R_TX_OFF */
+#define V_TX_SZ                 0x01
+#define V_TX_INIT               0x04
+/* R_SYNC_CTRL */
+#define V_EXT_CLK_SYNC          0x01
+#define V_SYNC_OFFS             0x02
+#define V_PCM_SYNC              0x04
+#define V_NEG_CLK               0x08
+#define V_HCLK                  0x10
+/*
+#define V_JATT_AUTO_DEL         0x20
+#define V_JATT_AUTO             0x40
+*/
+#define V_JATT_OFF              0x80
+/* R_STATE */
+#define V_E1_STA                0x01
+#define V_ALT_FR_RX             0x40
+#define V_ALT_FR_TX             0x80
+/* R_SYNC_STA */
+#define V_RX_STA                0x01
+#define V_FR_SYNC_E1            0x04
+#define V_SIG_LOS               0x08
+#define V_MFA_STA               0x10
+#define V_AIS                   0x40
+#define V_NO_MF_SYNC            0x80
+/* R_RX_SL0_0 */
+#define V_SI_FAS                0x01
+#define V_SI_NFAS               0x02
+#define V_A                     0x04
+#define V_CRC_OK                0x08
+#define V_TX_E1                 0x10
+#define V_TX_E2                 0x20
+#define V_RX_E1                 0x40
+#define V_RX_E2                 0x80
+/* R_SLIP */
+#define V_SLIP_RX               0x01
+#define V_FOSLIP_RX             0x08
+#define V_SLIP_TX               0x10
+#define V_FOSLIP_TX             0x80
+
+/* chapter 6: PCM interface */
+/* R_PCM_MD0 */
+#define V_PCM_MD                0x01
+#define V_C4_POL                0x02
+#define V_F0_NEG                0x04
+#define V_F0_LEN                0x08
+#define V_PCM_ADDR              0x10
+/* R_SL_SEL0 */
+#define V_SL_SEL0               0x01
+#define V_SH_SEL0               0x80
+/* R_SL_SEL1 */
+#define V_SL_SEL1               0x01
+#define V_SH_SEL1               0x80
+/* R_SL_SEL2 */
+#define V_SL_SEL2               0x01
+#define V_SH_SEL2               0x80
+/* R_SL_SEL3 */
+#define V_SL_SEL3               0x01
+#define V_SH_SEL3               0x80
+/* R_SL_SEL4 */
+#define V_SL_SEL4               0x01
+#define V_SH_SEL4               0x80
+/* R_SL_SEL5 */
+#define V_SL_SEL5               0x01
+#define V_SH_SEL5               0x80
+/* R_SL_SEL6 */
+#define V_SL_SEL6               0x01
+#define V_SH_SEL6               0x80
+/* R_SL_SEL7 */
+#define V_SL_SEL7               0x01
+#define V_SH_SEL7               0x80
+/* R_PCM_MD1 */
+#define V_ODEC_CON              0x01
+#define V_PLL_ADJ               0x04
+#define V_PCM_DR                0x10
+#define V_PCM_LOOP              0x40
+/* R_PCM_MD2 */
+#define V_SYNC_PLL              0x02
+#define V_SYNC_SRC              0x04
+#define V_SYNC_OUT              0x08
+#define V_ICR_FR_TIME           0x40
+#define V_EN_PLL                0x80
+
+/* chapter 7: pulse width modulation */
+/* R_PWM_MD */
+#define V_EXT_IRQ_EN            0x08
+#define V_PWM0_MD               0x10
+#define V_PWM1_MD               0x40
+
+/* chapter 8: multiparty audio conferences */
+/* R_CONF_EN */
+#define V_CONF_EN               0x01
+#define V_ULAW                  0x80
+/* A_CONF */
+#define V_CONF_NUM              0x01
+#define V_NOISE_SUPPR           0x08
+#define V_ATT_LEV               0x20
+#define V_CONF_SL               0x80
+/* R_CONF_OFLOW */
+#define V_CONF_OFLOW0           0x01
+#define V_CONF_OFLOW1           0x02
+#define V_CONF_OFLOW2           0x04
+#define V_CONF_OFLOW3           0x08
+#define V_CONF_OFLOW4           0x10
+#define V_CONF_OFLOW5           0x20
+#define V_CONF_OFLOW6           0x40
+#define V_CONF_OFLOW7           0x80
+
+/* chapter 9: DTMF contoller */
+/* R_DTMF0 */
+#define V_DTMF_EN               0x01
+#define V_HARM_SEL              0x02
+#define V_DTMF_RX_CH            0x04
+#define V_DTMF_STOP             0x08
+#define V_CHBL_SEL              0x10
+#define V_RST_DTMF              0x40
+#define V_ULAW_SEL              0x80
+
+/* chapter 10: BERT */
+/* R_BERT_WD_MD */
+#define V_PAT_SEQ               0x01
+#define V_BERT_ERR              0x08
+#define V_AUTO_WD_RES           0x20
+#define V_WD_RES                0x80
+/* R_BERT_STA */
+#define V_BERT_SYNC_SRC         0x01
+#define V_BERT_SYNC             0x10
+#define V_BERT_INV_DATA         0x20
+
+/* chapter 11: auxiliary interface */
+/* R_BRG_PCM_CFG */
+#define V_BRG_EN                0x01
+#define V_BRG_MD                0x02
+#define V_PCM_CLK               0x20
+#define V_ADDR_WRDLY            0x40
+/* R_BRG_CTRL */
+#define V_BRG_CS                0x01
+#define V_BRG_ADDR              0x08
+#define V_BRG_CS_SRC            0x80
+/* R_BRG_MD */
+#define V_BRG_MD0               0x01
+#define V_BRG_MD1               0x02
+#define V_BRG_MD2               0x04
+#define V_BRG_MD3               0x08
+#define V_BRG_MD4               0x10
+#define V_BRG_MD5               0x20
+#define V_BRG_MD6               0x40
+#define V_BRG_MD7               0x80
+/* R_BRG_TIM0 */
+#define V_BRG_TIM0_IDLE         0x01
+#define V_BRG_TIM0_CLK          0x10
+/* R_BRG_TIM1 */
+#define V_BRG_TIM1_IDLE         0x01
+#define V_BRG_TIM1_CLK          0x10
+/* R_BRG_TIM2 */
+#define V_BRG_TIM2_IDLE         0x01
+#define V_BRG_TIM2_CLK          0x10
+/* R_BRG_TIM3 */
+#define V_BRG_TIM3_IDLE         0x01
+#define V_BRG_TIM3_CLK          0x10
+/* R_BRG_TIM_SEL01 */
+#define V_BRG_WR_SEL0           0x01
+#define V_BRG_RD_SEL0           0x04
+#define V_BRG_WR_SEL1           0x10
+#define V_BRG_RD_SEL1           0x40
+/* R_BRG_TIM_SEL23 */
+#define V_BRG_WR_SEL2           0x01
+#define V_BRG_RD_SEL2           0x04
+#define V_BRG_WR_SEL3           0x10
+#define V_BRG_RD_SEL3           0x40
+/* R_BRG_TIM_SEL45 */
+#define V_BRG_WR_SEL4           0x01
+#define V_BRG_RD_SEL4           0x04
+#define V_BRG_WR_SEL5           0x10
+#define V_BRG_RD_SEL5           0x40
+/* R_BRG_TIM_SEL67 */
+#define V_BRG_WR_SEL6           0x01
+#define V_BRG_RD_SEL6           0x04
+#define V_BRG_WR_SEL7           0x10
+#define V_BRG_RD_SEL7           0x40
+
+/* chapter 12: clock, reset, interrupt, timer and watchdog */
+/* R_IRQMSK_MISC */
+#define V_STA_IRQMSK            0x01
+#define V_TI_IRQMSK             0x02
+#define V_PROC_IRQMSK           0x04
+#define V_DTMF_IRQMSK           0x08
+#define V_IRQ1S_MSK             0x10
+#define V_SA6_IRQMSK            0x20
+#define V_RX_EOMF_MSK           0x40
+#define V_TX_EOMF_MSK           0x80
+/* R_IRQ_CTRL */
+#define V_FIFO_IRQ              0x01
+#define V_GLOB_IRQ_EN           0x08
+#define V_IRQ_POL               0x10
+/* R_TI_WD */
+#define V_EV_TS                 0x01
+#define V_WD_TS                 0x10
+/* A_IRQ_MSK */
+#define V_IRQ                   0x01
+#define V_BERT_EN               0x02
+#define V_MIX_IRQ               0x04
+/* R_IRQ_OVIEW */
+#define V_IRQ_FIFO_BL0          0x01
+#define V_IRQ_FIFO_BL1          0x02
+#define V_IRQ_FIFO_BL2          0x04
+#define V_IRQ_FIFO_BL3          0x08
+#define V_IRQ_FIFO_BL4          0x10
+#define V_IRQ_FIFO_BL5          0x20
+#define V_IRQ_FIFO_BL6          0x40
+#define V_IRQ_FIFO_BL7          0x80
+/* R_IRQ_MISC */
+#define V_STA_IRQ               0x01
+#define V_TI_IRQ                0x02
+#define V_IRQ_PROC              0x04
+#define V_DTMF_IRQ              0x08
+#define V_IRQ1S                 0x10
+#define V_SA6_IRQ               0x20
+#define V_RX_EOMF               0x40
+#define V_TX_EOMF               0x80
+/* R_STATUS */
+#define V_BUSY                  0x01
+#define V_PROC                  0x02
+#define V_DTMF_STA              0x04
+#define V_LOST_STA              0x08
+#define V_SYNC_IN               0x10
+#define V_EXT_IRQSTA            0x20
+#define V_MISC_IRQSTA           0x40
+#define V_FR_IRQSTA             0x80
+/* R_IRQ_FIFO_BL0 */
+#define V_IRQ_FIFO0_TX          0x01
+#define V_IRQ_FIFO0_RX          0x02
+#define V_IRQ_FIFO1_TX          0x04
+#define V_IRQ_FIFO1_RX          0x08
+#define V_IRQ_FIFO2_TX          0x10
+#define V_IRQ_FIFO2_RX          0x20
+#define V_IRQ_FIFO3_TX          0x40
+#define V_IRQ_FIFO3_RX          0x80
+/* R_IRQ_FIFO_BL1 */
+#define V_IRQ_FIFO4_TX          0x01
+#define V_IRQ_FIFO4_RX          0x02
+#define V_IRQ_FIFO5_TX          0x04
+#define V_IRQ_FIFO5_RX          0x08
+#define V_IRQ_FIFO6_TX          0x10
+#define V_IRQ_FIFO6_RX          0x20
+#define V_IRQ_FIFO7_TX          0x40
+#define V_IRQ_FIFO7_RX          0x80
+/* R_IRQ_FIFO_BL2 */
+#define V_IRQ_FIFO8_TX          0x01
+#define V_IRQ_FIFO8_RX          0x02
+#define V_IRQ_FIFO9_TX          0x04
+#define V_IRQ_FIFO9_RX          0x08
+#define V_IRQ_FIFO10_TX         0x10
+#define V_IRQ_FIFO10_RX         0x20
+#define V_IRQ_FIFO11_TX         0x40
+#define V_IRQ_FIFO11_RX         0x80
+/* R_IRQ_FIFO_BL3 */
+#define V_IRQ_FIFO12_TX         0x01
+#define V_IRQ_FIFO12_RX         0x02
+#define V_IRQ_FIFO13_TX         0x04
+#define V_IRQ_FIFO13_RX         0x08
+#define V_IRQ_FIFO14_TX         0x10
+#define V_IRQ_FIFO14_RX         0x20
+#define V_IRQ_FIFO15_TX         0x40
+#define V_IRQ_FIFO15_RX         0x80
+/* R_IRQ_FIFO_BL4 */
+#define V_IRQ_FIFO16_TX         0x01
+#define V_IRQ_FIFO16_RX         0x02
+#define V_IRQ_FIFO17_TX         0x04
+#define V_IRQ_FIFO17_RX         0x08
+#define V_IRQ_FIFO18_TX         0x10
+#define V_IRQ_FIFO18_RX         0x20
+#define V_IRQ_FIFO19_TX         0x40
+#define V_IRQ_FIFO19_RX         0x80
+/* R_IRQ_FIFO_BL5 */
+#define V_IRQ_FIFO20_TX         0x01
+#define V_IRQ_FIFO20_RX         0x02
+#define V_IRQ_FIFO21_TX         0x04
+#define V_IRQ_FIFO21_RX         0x08
+#define V_IRQ_FIFO22_TX         0x10
+#define V_IRQ_FIFO22_RX         0x20
+#define V_IRQ_FIFO23_TX         0x40
+#define V_IRQ_FIFO23_RX         0x80
+/* R_IRQ_FIFO_BL6 */
+#define V_IRQ_FIFO24_TX         0x01
+#define V_IRQ_FIFO24_RX         0x02
+#define V_IRQ_FIFO25_TX         0x04
+#define V_IRQ_FIFO25_RX         0x08
+#define V_IRQ_FIFO26_TX         0x10
+#define V_IRQ_FIFO26_RX         0x20
+#define V_IRQ_FIFO27_TX         0x40
+#define V_IRQ_FIFO27_RX         0x80
+/* R_IRQ_FIFO_BL7 */
+#define V_IRQ_FIFO28_TX         0x01
+#define V_IRQ_FIFO28_RX         0x02
+#define V_IRQ_FIFO29_TX         0x04
+#define V_IRQ_FIFO29_RX         0x08
+#define V_IRQ_FIFO30_TX         0x10
+#define V_IRQ_FIFO30_RX         0x20
+#define V_IRQ_FIFO31_TX         0x40
+#define V_IRQ_FIFO31_RX         0x80
+
+/* chapter 13: general purpose I/O pins (GPIO) and input pins (GPI) */
+/* R_GPIO_OUT0 */
+#define V_GPIO_OUT0             0x01
+#define V_GPIO_OUT1             0x02
+#define V_GPIO_OUT2             0x04
+#define V_GPIO_OUT3             0x08
+#define V_GPIO_OUT4             0x10
+#define V_GPIO_OUT5             0x20
+#define V_GPIO_OUT6             0x40
+#define V_GPIO_OUT7             0x80
+/* R_GPIO_OUT1 */
+#define V_GPIO_OUT8             0x01
+#define V_GPIO_OUT9             0x02
+#define V_GPIO_OUT10            0x04
+#define V_GPIO_OUT11            0x08
+#define V_GPIO_OUT12            0x10
+#define V_GPIO_OUT13            0x20
+#define V_GPIO_OUT14            0x40
+#define V_GPIO_OUT15            0x80
+/* R_GPIO_EN0 */
+#define V_GPIO_EN0              0x01
+#define V_GPIO_EN1              0x02
+#define V_GPIO_EN2              0x04
+#define V_GPIO_EN3              0x08
+#define V_GPIO_EN4              0x10
+#define V_GPIO_EN5              0x20
+#define V_GPIO_EN6              0x40
+#define V_GPIO_EN7              0x80
+/* R_GPIO_EN1 */
+#define V_GPIO_EN8              0x01
+#define V_GPIO_EN9              0x02
+#define V_GPIO_EN10             0x04
+#define V_GPIO_EN11             0x08
+#define V_GPIO_EN12             0x10
+#define V_GPIO_EN13             0x20
+#define V_GPIO_EN14             0x40
+#define V_GPIO_EN15             0x80
+/* R_GPIO_SEL */
+#define V_GPIO_SEL0             0x01
+#define V_GPIO_SEL1             0x02
+#define V_GPIO_SEL2             0x04
+#define V_GPIO_SEL3             0x08
+#define V_GPIO_SEL4             0x10
+#define V_GPIO_SEL5             0x20
+#define V_GPIO_SEL6             0x40
+#define V_GPIO_SEL7             0x80
+/* R_GPIO_IN0 */
+#define V_GPIO_IN0              0x01
+#define V_GPIO_IN1              0x02
+#define V_GPIO_IN2              0x04
+#define V_GPIO_IN3              0x08
+#define V_GPIO_IN4              0x10
+#define V_GPIO_IN5              0x20
+#define V_GPIO_IN6              0x40
+#define V_GPIO_IN7              0x80
+/* R_GPIO_IN1 */
+#define V_GPIO_IN8              0x01
+#define V_GPIO_IN9              0x02
+#define V_GPIO_IN10             0x04
+#define V_GPIO_IN11             0x08
+#define V_GPIO_IN12             0x10
+#define V_GPIO_IN13             0x20
+#define V_GPIO_IN14             0x40
+#define V_GPIO_IN15             0x80
+/* R_GPI_IN0 */
+#define V_GPI_IN0               0x01
+#define V_GPI_IN1               0x02
+#define V_GPI_IN2               0x04
+#define V_GPI_IN3               0x08
+#define V_GPI_IN4               0x10
+#define V_GPI_IN5               0x20
+#define V_GPI_IN6               0x40
+#define V_GPI_IN7               0x80
+/* R_GPI_IN1 */
+#define V_GPI_IN8               0x01
+#define V_GPI_IN9               0x02
+#define V_GPI_IN10              0x04
+#define V_GPI_IN11              0x08
+#define V_GPI_IN12              0x10
+#define V_GPI_IN13              0x20
+#define V_GPI_IN14              0x40
+#define V_GPI_IN15              0x80
+/* R_GPI_IN2 */
+#define V_GPI_IN16              0x01
+#define V_GPI_IN17              0x02
+#define V_GPI_IN18              0x04
+#define V_GPI_IN19              0x08
+#define V_GPI_IN20              0x10
+#define V_GPI_IN21              0x20
+#define V_GPI_IN22              0x40
+#define V_GPI_IN23              0x80
+/* R_GPI_IN3 */
+#define V_GPI_IN24              0x01
+#define V_GPI_IN25              0x02
+#define V_GPI_IN26              0x04
+#define V_GPI_IN27              0x08
+#define V_GPI_IN28              0x10
+#define V_GPI_IN29              0x20
+#define V_GPI_IN30              0x40
+#define V_GPI_IN31              0x80
+
+/* map of all registers, used for debugging */
+
+#ifdef HFC_REGISTER_DEBUG
+struct hfc_register_names {
+        char *name;
+        u_char reg;
+} hfc_register_names[] = {
+        /* write registers */
+        {"R_CIRM",              0x00},
+        {"R_CTRL",              0x01},
+        {"R_BRG_PCM_CFG ",      0x02},
+        {"R_RAM_ADDR0",         0x08},
+        {"R_RAM_ADDR1",         0x09},
+        {"R_RAM_ADDR2",         0x0A},
+        {"R_FIRST_FIFO",        0x0B},
+        {"R_RAM_SZ",            0x0C},
+        {"R_FIFO_MD",           0x0D},
+        {"R_INC_RES_FIFO",      0x0E},
+        {"R_FIFO / R_FSM_IDX",  0x0F},
+        {"R_SLOT",              0x10},
+        {"R_IRQMSK_MISC",       0x11},
+        {"R_SCI_MSK",           0x12},
+        {"R_IRQ_CTRL",          0x13},
+        {"R_PCM_MD0",           0x14},
+        {"R_0x15",              0x15},
+        {"R_ST_SEL",            0x16},
+        {"R_ST_SYNC",           0x17},
+        {"R_CONF_EN",           0x18},
+        {"R_TI_WD",             0x1A},
+        {"R_BERT_WD_MD",        0x1B},
+        {"R_DTMF",              0x1C},
+        {"R_DTMF_N",            0x1D},
+        {"R_E1_XX_STA",         0x20},
+        {"R_LOS0",              0x22},
+        {"R_LOS1",              0x23},
+        {"R_RX0",               0x24},
+        {"R_RX_FR0",            0x25},
+        {"R_RX_FR1",            0x26},
+        {"R_TX0",               0x28},
+        {"R_TX1",               0x29},
+        {"R_TX_FR0",            0x2C},
+        {"R_TX_FR1",            0x2D},
+        {"R_TX_FR2",            0x2E},
+        {"R_JATT_ATT",          0x2F},
+        {"A_ST_xx_STA/R_RX_OFF", 0x30},
+        {"A_ST_CTRL0/R_SYNC_OUT", 0x31},
+        {"A_ST_CTRL1",          0x32},
+        {"A_ST_CTRL2",          0x33},
+        {"A_ST_SQ_WR",          0x34},
+        {"R_TX_OFF",            0x34},
+        {"R_SYNC_CTRL",         0x35},
+        {"A_ST_CLK_DLY",        0x37},
+        {"R_PWM0",              0x38},
+        {"R_PWM1",              0x39},
+        {"A_ST_B1_TX",          0x3C},
+        {"A_ST_B2_TX",          0x3D},
+        {"A_ST_D_TX",           0x3E},
+        {"R_GPIO_OUT0",         0x40},
+        {"R_GPIO_OUT1",         0x41},
+        {"R_GPIO_EN0",          0x42},
+        {"R_GPIO_EN1",          0x43},
+        {"R_GPIO_SEL",          0x44},
+        {"R_BRG_CTRL",          0x45},
+        {"R_PWM_MD",            0x46},
+        {"R_BRG_MD",            0x47},
+        {"R_BRG_TIM0",          0x48},
+        {"R_BRG_TIM1",          0x49},
+        {"R_BRG_TIM2",          0x4A},
+        {"R_BRG_TIM3",          0x4B},
+        {"R_BRG_TIM_SEL01",     0x4C},
+        {"R_BRG_TIM_SEL23",     0x4D},
+        {"R_BRG_TIM_SEL45",     0x4E},
+        {"R_BRG_TIM_SEL67",     0x4F},
+        {"A_FIFO_DATA0-2",      0x80},
+        {"A_FIFO_DATA0-2_NOINC", 0x84},
+        {"R_RAM_DATA",          0xC0},
+        {"A_SL_CFG",            0xD0},
+        {"A_CONF",              0xD1},
+        {"A_CH_MSK",            0xF4},
+        {"A_CON_HDLC",          0xFA},
+        {"A_SUBCH_CFG",         0xFB},
+        {"A_CHANNEL",           0xFC},
+        {"A_FIFO_SEQ",          0xFD},
+        {"A_IRQ_MSK",           0xFF},
+        {NULL, 0},
+
+        /* read registers */
+        {"A_Z1",                0x04},
+        {"A_Z1H",               0x05},
+        {"A_Z2",                0x06},
+        {"A_Z2H",               0x07},
+        {"A_F1",                0x0C},
+        {"A_F2",                0x0D},
+        {"R_IRQ_OVIEW",         0x10},
+        {"R_IRQ_MISC",          0x11},
+        {"R_IRQ_STATECH",       0x12},
+        {"R_CONF_OFLOW",        0x14},
+        {"R_RAM_USE",           0x15},
+        {"R_CHIP_ID",           0x16},
+        {"R_BERT_STA",          0x17},
+        {"R_F0_CNTL",           0x18},
+        {"R_F0_CNTH",           0x19},
+        {"R_BERT_ECL",          0x1A},
+        {"R_BERT_ECH",          0x1B},
+        {"R_STATUS",            0x1C},
+        {"R_CHIP_RV",           0x1F},
+        {"R_STATE",             0x20},
+        {"R_SYNC_STA",          0x24},
+        {"R_RX_SL0_0",          0x25},
+        {"R_RX_SL0_1",          0x26},
+        {"R_RX_SL0_2",          0x27},
+        {"R_JATT_DIR",          0x2b},
+        {"R_SLIP",              0x2c},
+        {"A_ST_RD_STA",         0x30},
+        {"R_FAS_ECL",           0x30},
+        {"R_FAS_ECH",           0x31},
+        {"R_VIO_ECL",           0x32},
+        {"R_VIO_ECH",           0x33},
+        {"R_CRC_ECL / A_ST_SQ_RD", 0x34},
+        {"R_CRC_ECH",           0x35},
+        {"R_E_ECL",             0x36},
+        {"R_E_ECH",             0x37},
+        {"R_SA6_SA13_ECL",      0x38},
+        {"R_SA6_SA13_ECH",      0x39},
+        {"R_SA6_SA23_ECL",      0x3A},
+        {"R_SA6_SA23_ECH",      0x3B},
+        {"A_ST_B1_RX",          0x3C},
+        {"A_ST_B2_RX",          0x3D},
+        {"A_ST_D_RX",           0x3E},
+        {"A_ST_E_RX",           0x3F},
+        {"R_GPIO_IN0",          0x40},
+        {"R_GPIO_IN1",          0x41},
+        {"R_GPI_IN0",           0x44},
+        {"R_GPI_IN1",           0x45},
+        {"R_GPI_IN2",           0x46},
+        {"R_GPI_IN3",           0x47},
+        {"A_FIFO_DATA0-2",      0x80},
+        {"A_FIFO_DATA0-2_NOINC", 0x84},
+        {"R_INT_DATA",          0x88},
+        {"R_RAM_DATA",          0xC0},
+        {"R_IRQ_FIFO_BL0",      0xC8},
+        {"R_IRQ_FIFO_BL1",      0xC9},
+        {"R_IRQ_FIFO_BL2",      0xCA},
+        {"R_IRQ_FIFO_BL3",      0xCB},
+        {"R_IRQ_FIFO_BL4",      0xCC},
+        {"R_IRQ_FIFO_BL5",      0xCD},
+        {"R_IRQ_FIFO_BL6",      0xCE},
+        {"R_IRQ_FIFO_BL7",      0xCF},
+};
+#endif /* HFC_REGISTER_DEBUG */
+
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
new file mode 100644
index 000000000000..2649ea55a9e8
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -0,0 +1,5320 @@
+/*
+ * hfcmulti.c  low level driver for hfc-4s/hfc-8s/hfc-e1 based cards
+ *
+ * Author       Andreas Eversberg (jolly@eversberg.eu)
+ * ported to mqueue mechanism:
+ *              Peter Sprenger (sprengermoving-bytes.de)
+ *
+ * inspired by existing hfc-pci driver:
+ * Copyright 1999  by Werner Cornelius (werner@isdn-development.de)
+ * Copyright 2008  by Karsten Keil (kkeil@suse.de)
+ * Copyright 2008  by Andreas Eversberg (jolly@eversberg.eu)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * Thanks to Cologne Chip AG for this great controller!
+ */
+
+/*
+ * module parameters:
+ * type:
+ *      By default (0), the card is automatically detected.
+ *      Or use the following combinations:
+ *      Bit 0-7   = 0x00001 = HFC-E1 (1 port)
+ * or   Bit 0-7   = 0x00004 = HFC-4S (4 ports)
+ * or   Bit 0-7   = 0x00008 = HFC-8S (8 ports)
+ *      Bit 8     = 0x00100 = uLaw (instead of aLaw)
+ *      Bit 9     = 0x00200 = Disable DTMF detect on all B-channels via hardware
+ *      Bit 10    = spare
+ *      Bit 11    = 0x00800 = Force PCM bus into slave mode. (otherwhise auto)
+ * or   Bit 12    = 0x01000 = Force PCM bus into master mode. (otherwhise auto)
+ *      Bit 13    = spare
+ *      Bit 14    = 0x04000 = Use external ram (128K)
+ *      Bit 15    = 0x08000 = Use external ram (512K)
+ *      Bit 16    = 0x10000 = Use 64 timeslots instead of 32
+ * or   Bit 17    = 0x20000 = Use 128 timeslots instead of anything else
+ *      Bit 18    = spare
+ *      Bit 19    = 0x80000 = Send the Watchdog a Signal (Dual E1 with Watchdog)
+ * (all other bits are reserved and shall be 0)
+ *      example: 0x20204 one HFC-4S with dtmf detection and 128 timeslots on PCM
+ *               bus (PCM master)
+ *
+ * port: (optional or required for all ports on all installed cards)
+ *      HFC-4S/HFC-8S only bits:
+ *      Bit 0     = 0x001 = Use master clock for this S/T interface
+ *                          (ony once per chip).
+ *      Bit 1     = 0x002 = transmitter line setup (non capacitive mode)
+ *                          Don't use this unless you know what you are doing!
+ *      Bit 2     = 0x004 = Disable E-channel. (No E-channel processing)
+ *      example: 0x0001,0x0000,0x0000,0x0000 one HFC-4S with master clock
+ *               received from port 1
+ *
+ *      HFC-E1 only bits:
+ *      Bit 0     = 0x0001 = interface: 0=copper, 1=optical
+ *      Bit 1     = 0x0002 = reserved (later for 32 B-channels transparent mode)
+ *      Bit 2     = 0x0004 = Report LOS
+ *      Bit 3     = 0x0008 = Report AIS
+ *      Bit 4     = 0x0010 = Report SLIP
+ *      Bit 5     = 0x0020 = Report RDI
+ *      Bit 8     = 0x0100 = Turn off CRC-4 Multiframe Mode, use double frame
+ *                           mode instead.
+ *      Bit 9     = 0x0200 = Force get clock from interface, even in NT mode.
+ * or   Bit 10    = 0x0400 = Force put clock to interface, even in TE mode.
+ *      Bit 11    = 0x0800 = Use direct RX clock for PCM sync rather than PLL.
+ *                           (E1 only)
+ *      Bit 12-13 = 0xX000 = elastic jitter buffer (1-3), Set both bits to 0
+ *                           for default.
+ * (all other bits are reserved and shall be 0)
+ *
+ * debug:
+ *      NOTE: only one debug value must be given for all cards
+ *      enable debugging (see hfc_multi.h for debug options)
+ *
+ * poll:
+ *      NOTE: only one poll value must be given for all cards
+ *      Give the number of samples for each fifo process.
+ *      By default 128 is used. Decrease to reduce delay, increase to
+ *      reduce cpu load. If unsure, don't mess with it!
+ *      Valid is 8, 16, 32, 64, 128, 256.
+ *
+ * pcm:
+ *      NOTE: only one pcm value must be given for every card.
+ *      The PCM bus id tells the mISDNdsp module about the connected PCM bus.
+ *      By default (0), the PCM bus id is 100 for the card that is PCM master.
+ *      If multiple cards are PCM master (because they are not interconnected),
+ *      each card with PCM master will have increasing PCM id.
+ *      All PCM busses with the same ID are expected to be connected and have
+ *      common time slots slots.
+ *      Only one chip of the PCM bus must be master, the others slave.
+ *      -1 means no support of PCM bus not even.
+ *      Omit this value, if all cards are interconnected or none is connected.
+ *      If unsure, don't give this parameter.
+ *
+ * dslot:
+ *      NOTE: only one poll value must be given for every card.
+ *      Also this value must be given for non-E1 cards. If omitted, the E1
+ *      card has D-channel on time slot 16, which is default.
+ *      If 1..15 or 17..31, an alternate time slot is used for D-channel.
+ *      In this case, the application must be able to handle this.
+ *      If -1 is given, the D-channel is disabled and all 31 slots can be used
+ *      for B-channel. (only for specific applications)
+ *      If you don't know how to use it, you don't need it!
+ *
+ * iomode:
+ *      NOTE: only one mode value must be given for every card.
+ *      -> See hfc_multi.h for HFC_IO_MODE_* values
+ *      By default, the IO mode is pci memory IO (MEMIO).
+ *      Some cards requre specific IO mode, so it cannot be changed.
+ *      It may be usefull to set IO mode to register io (REGIO) to solve
+ *      PCI bridge problems.
+ *      If unsure, don't give this parameter.
+ *
+ * clockdelay_nt:
+ *      NOTE: only one clockdelay_nt value must be given once for all cards.
+ *      Give the value of the clock control register (A_ST_CLK_DLY)
+ *      of the S/T interfaces in NT mode.
+ *      This register is needed for the TBR3 certification, so don't change it.
+ *
+ * clockdelay_te:
+ *      NOTE: only one clockdelay_te value must be given once
+ *      Give the value of the clock control register (A_ST_CLK_DLY)
+ *      of the S/T interfaces in TE mode.
+ *      This register is needed for the TBR3 certification, so don't change it.
+ */
+
+/*
+ * debug register access (never use this, it will flood your system log)
+ * #define HFC_REGISTER_DEBUG
+ */
+
+static const char *hfcmulti_revision = "2.00";
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/mISDNhw.h>
+#include <linux/mISDNdsp.h>
+
+/*
+#define IRQCOUNT_DEBUG
+#define IRQ_DEBUG
+*/
+
+#include "hfc_multi.h"
+#ifdef ECHOPREP
+#include "gaintab.h"
+#endif
+
+#define MAX_CARDS       8
+#define MAX_PORTS       (8 * MAX_CARDS)
+
+static LIST_HEAD(HFClist);
+static spinlock_t HFClock; /* global hfc list lock */
+
+static void ph_state_change(struct dchannel *);
+static void (*hfc_interrupt)(void);
+static void (*register_interrupt)(void);
+static int (*unregister_interrupt)(void);
+static int interrupt_registered;
+
+static struct hfc_multi *syncmaster;
+int plxsd_master; /* if we have a master card (yet) */
+static spinlock_t plx_lock; /* may not acquire other lock inside */
+EXPORT_SYMBOL(plx_lock);
+
+#define TYP_E1          1
+#define TYP_4S          4
+#define TYP_8S          8
+
+static int poll_timer = 6;      /* default = 128 samples = 16ms */
+/* number of POLL_TIMER interrupts for G2 timeout (ca 1s) */
+static int nt_t1_count[] = { 3840, 1920, 960, 480, 240, 120, 60, 30  };
+#define CLKDEL_TE       0x0f    /* CLKDEL in TE mode */
+#define CLKDEL_NT       0x6c    /* CLKDEL in NT mode
+                                   (0x60 MUST be included!) */
+static u_char silence = 0xff;   /* silence by LAW */
+
+#define DIP_4S  0x1             /* DIP Switches for Beronet 1S/2S/4S cards */
+#define DIP_8S  0x2             /* DIP Switches for Beronet 8S+ cards */
+#define DIP_E1  0x3             /* DIP Switches for Beronet E1 cards */
+
+/*
+ * module stuff
+ */
+
+static uint     type[MAX_CARDS];
+static uint     pcm[MAX_CARDS];
+static uint     dslot[MAX_CARDS];
+static uint     iomode[MAX_CARDS];
+static uint     port[MAX_PORTS];
+static uint     debug;
+static uint     poll;
+static uint     timer;
+static uint     clockdelay_te = CLKDEL_TE;
+static uint     clockdelay_nt = CLKDEL_NT;
+
+static int      HFC_cnt, Port_cnt, PCM_cnt = 99;
+
+MODULE_AUTHOR("Andreas Eversberg");
+MODULE_LICENSE("GPL");
+module_param(debug, uint, S_IRUGO | S_IWUSR);
+module_param(poll, uint, S_IRUGO | S_IWUSR);
+module_param(timer, uint, S_IRUGO | S_IWUSR);
+module_param(clockdelay_te, uint, S_IRUGO | S_IWUSR);
+module_param(clockdelay_nt, uint, S_IRUGO | S_IWUSR);
+module_param_array(type, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(pcm, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(dslot, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(iomode, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(port, uint, NULL, S_IRUGO | S_IWUSR);
+
+#ifdef HFC_REGISTER_DEBUG
+#define HFC_outb(hc, reg, val) \
+        (hc->HFC_outb(hc, reg, val, __func__, __LINE__))
+#define HFC_outb_nodebug(hc, reg, val) \
+        (hc->HFC_outb_nodebug(hc, reg, val, __func__, __LINE__))
+#define HFC_inb(hc, reg) \
+        (hc->HFC_inb(hc, reg, __func__, __LINE__))
+#define HFC_inb_nodebug(hc, reg) \
+        (hc->HFC_inb_nodebug(hc, reg, __func__, __LINE__))
+#define HFC_inw(hc, reg) \
+        (hc->HFC_inw(hc, reg, __func__, __LINE__))
+#define HFC_inw_nodebug(hc, reg) \
+        (hc->HFC_inw_nodebug(hc, reg, __func__, __LINE__))
+#define HFC_wait(hc) \
+        (hc->HFC_wait(hc, __func__, __LINE__))
+#define HFC_wait_nodebug(hc) \
+        (hc->HFC_wait_nodebug(hc, __func__, __LINE__))
+#else
+#define HFC_outb(hc, reg, val)          (hc->HFC_outb(hc, reg, val))
+#define HFC_outb_nodebug(hc, reg, val)  (hc->HFC_outb_nodebug(hc, reg, val))
+#define HFC_inb(hc, reg)                (hc->HFC_inb(hc, reg))
+#define HFC_inb_nodebug(hc, reg)        (hc->HFC_inb_nodebug(hc, reg))
+#define HFC_inw(hc, reg)                (hc->HFC_inw(hc, reg))
+#define HFC_inw_nodebug(hc, reg)        (hc->HFC_inw_nodebug(hc, reg))
+#define HFC_wait(hc)                    (hc->HFC_wait(hc))
+#define HFC_wait_nodebug(hc)            (hc->HFC_wait_nodebug(hc))
+#endif
+
+/* HFC_IO_MODE_PCIMEM */
+static void
+#ifdef HFC_REGISTER_DEBUG
+HFC_outb_pcimem(struct hfc_multi *hc, u_char reg, u_char val,
+                const char *function, int line)
+#else
+HFC_outb_pcimem(struct hfc_multi *hc, u_char reg, u_char val)
+#endif
+{
+        writeb(val, (hc->pci_membase)+reg);
+}
+static u_char
+#ifdef HFC_REGISTER_DEBUG
+HFC_inb_pcimem(struct hfc_multi *hc, u_char reg, const char *function, int line)
+#else
+HFC_inb_pcimem(struct hfc_multi *hc, u_char reg)
+#endif
+{
+        return readb((hc->pci_membase)+reg);
+}
+static u_short
+#ifdef HFC_REGISTER_DEBUG
+HFC_inw_pcimem(struct hfc_multi *hc, u_char reg, const char *function, int line)
+#else
+HFC_inw_pcimem(struct hfc_multi *hc, u_char reg)
+#endif
+{
+        return readw((hc->pci_membase)+reg);
+}
+static void
+#ifdef HFC_REGISTER_DEBUG
+HFC_wait_pcimem(struct hfc_multi *hc, const char *function, int line)
+#else
+HFC_wait_pcimem(struct hfc_multi *hc)
+#endif
+{
+        while (readb((hc->pci_membase)+R_STATUS) & V_BUSY);
+}
+
+/* HFC_IO_MODE_REGIO */
+static void
+#ifdef HFC_REGISTER_DEBUG
+HFC_outb_regio(struct hfc_multi *hc, u_char reg, u_char val,
+        const char *function, int line)
+#else
+HFC_outb_regio(struct hfc_multi *hc, u_char reg, u_char val)
+#endif
+{
+        outb(reg, (hc->pci_iobase)+4);
+        outb(val, hc->pci_iobase);
+}
+static u_char
+#ifdef HFC_REGISTER_DEBUG
+HFC_inb_regio(struct hfc_multi *hc, u_char reg, const char *function, int line)
+#else
+HFC_inb_regio(struct hfc_multi *hc, u_char reg)
+#endif
+{
+        outb(reg, (hc->pci_iobase)+4);
+        return inb(hc->pci_iobase);
+}
+static u_short
+#ifdef HFC_REGISTER_DEBUG
+HFC_inw_regio(struct hfc_multi *hc, u_char reg, const char *function, int line)
+#else
+HFC_inw_regio(struct hfc_multi *hc, u_char reg)
+#endif
+{
+        outb(reg, (hc->pci_iobase)+4);
+        return inw(hc->pci_iobase);
+}
+static void
+#ifdef HFC_REGISTER_DEBUG
+HFC_wait_regio(struct hfc_multi *hc, const char *function, int line)
+#else
+HFC_wait_regio(struct hfc_multi *hc)
+#endif
+{
+        outb(R_STATUS, (hc->pci_iobase)+4);
+        while (inb(hc->pci_iobase) & V_BUSY);
+}
+
+#ifdef HFC_REGISTER_DEBUG
+static void
+HFC_outb_debug(struct hfc_multi *hc, u_char reg, u_char val,
+                const char *function, int line)
+{
+        char regname[256] = "", bits[9] = "xxxxxxxx";
+        int i;
+
+        i = -1;
+        while (hfc_register_names[++i].name) {
+                if (hfc_register_names[i].reg == reg)
+                        strcat(regname, hfc_register_names[i].name);
+        }
+        if (regname[0] == '\0')
+                strcpy(regname, "register");
+
+        bits[7] = '0'+(!!(val&1));
+        bits[6] = '0'+(!!(val&2));
+        bits[5] = '0'+(!!(val&4));
+        bits[4] = '0'+(!!(val&8));
+        bits[3] = '0'+(!!(val&16));
+        bits[2] = '0'+(!!(val&32));
+        bits[1] = '0'+(!!(val&64));
+        bits[0] = '0'+(!!(val&128));
+        printk(KERN_DEBUG
+            "HFC_outb(chip %d, %02x=%s, 0x%02x=%s); in %s() line %d\n",
+            hc->id, reg, regname, val, bits, function, line);
+        HFC_outb_nodebug(hc, reg, val);
+}
+static u_char
+HFC_inb_debug(struct hfc_multi *hc, u_char reg, const char *function, int line)
+{
+        char regname[256] = "", bits[9] = "xxxxxxxx";
+        u_char val = HFC_inb_nodebug(hc, reg);
+        int i;
+
+        i = 0;
+        while (hfc_register_names[i++].name)
+                ;
+        while (hfc_register_names[++i].name) {
+                if (hfc_register_names[i].reg == reg)
+                        strcat(regname, hfc_register_names[i].name);
+        }
+        if (regname[0] == '\0')
+                strcpy(regname, "register");
+
+        bits[7] = '0'+(!!(val&1));
+        bits[6] = '0'+(!!(val&2));
+        bits[5] = '0'+(!!(val&4));
+        bits[4] = '0'+(!!(val&8));
+        bits[3] = '0'+(!!(val&16));
+        bits[2] = '0'+(!!(val&32));
+        bits[1] = '0'+(!!(val&64));
+        bits[0] = '0'+(!!(val&128));
+        printk(KERN_DEBUG
+            "HFC_inb(chip %d, %02x=%s) = 0x%02x=%s; in %s() line %d\n",
+            hc->id, reg, regname, val, bits, function, line);
+        return val;
+}
+static u_short
+HFC_inw_debug(struct hfc_multi *hc, u_char reg, const char *function, int line)
+{
+        char regname[256] = "";
+        u_short val = HFC_inw_nodebug(hc, reg);
+        int i;
+
+        i = 0;
+        while (hfc_register_names[i++].name)
+                ;
+        while (hfc_register_names[++i].name) {
+                if (hfc_register_names[i].reg == reg)
+                        strcat(regname, hfc_register_names[i].name);
+        }
+        if (regname[0] == '\0')
+                strcpy(regname, "register");
+
+        printk(KERN_DEBUG
+            "HFC_inw(chip %d, %02x=%s) = 0x%04x; in %s() line %d\n",
+            hc->id, reg, regname, val, function, line);
+        return val;
+}
+static void
+HFC_wait_debug(struct hfc_multi *hc, const char *function, int line)
+{
+        printk(KERN_DEBUG "HFC_wait(chip %d); in %s() line %d\n",
+            hc->id, function, line);
+        HFC_wait_nodebug(hc);
+}
+#endif
+
+/* write fifo data (REGIO) */
+void
+write_fifo_regio(struct hfc_multi *hc, u_char *data, int len)
+{
+        outb(A_FIFO_DATA0, (hc->pci_iobase)+4);
+        while (len>>2) {
+                outl(*(u32 *)data, hc->pci_iobase);
+                data += 4;
+                len -= 4;
+        }
+        while (len>>1) {
+                outw(*(u16 *)data, hc->pci_iobase);
+                data += 2;
+                len -= 2;
+        }
+        while (len) {
+                outb(*data, hc->pci_iobase);
+                data++;
+                len--;
+        }
+}
+/* write fifo data (PCIMEM) */
+void
+write_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len)
+{
+        while (len>>2) {
+                writel(*(u32 *)data, (hc->pci_membase)+A_FIFO_DATA0);
+                data += 4;
+                len -= 4;
+        }
+        while (len>>1) {
+                writew(*(u16 *)data, (hc->pci_membase)+A_FIFO_DATA0);
+                data += 2;
+                len -= 2;
+        }
+        while (len) {
+                writeb(*data, (hc->pci_membase)+A_FIFO_DATA0);
+                data++;
+                len--;
+        }
+}
+/* read fifo data (REGIO) */
+void
+read_fifo_regio(struct hfc_multi *hc, u_char *data, int len)
+{
+        outb(A_FIFO_DATA0, (hc->pci_iobase)+4);
+        while (len>>2) {
+                *(u32 *)data = inl(hc->pci_iobase);
+                data += 4;
+                len -= 4;
+        }
+        while (len>>1) {
+                *(u16 *)data = inw(hc->pci_iobase);
+                data += 2;
+                len -= 2;
+        }
+        while (len) {
+                *data = inb(hc->pci_iobase);
+                data++;
+                len--;
+        }
+}
+
+/* read fifo data (PCIMEM) */
+void
+read_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len)
+{
+        while (len>>2) {
+                *(u32 *)data =
+                        readl((hc->pci_membase)+A_FIFO_DATA0);
+                data += 4;
+                len -= 4;
+        }
+        while (len>>1) {
+                *(u16 *)data =
+                        readw((hc->pci_membase)+A_FIFO_DATA0);
+                data += 2;
+                len -= 2;
+        }
+        while (len) {
+                *data = readb((hc->pci_membase)+A_FIFO_DATA0);
+                data++;
+                len--;
+        }
+}
+
+
+static void
+enable_hwirq(struct hfc_multi *hc)
+{
+        hc->hw.r_irq_ctrl |= V_GLOB_IRQ_EN;
+        HFC_outb(hc, R_IRQ_CTRL, hc->hw.r_irq_ctrl);
+}
+
+static void
+disable_hwirq(struct hfc_multi *hc)
+{
+        hc->hw.r_irq_ctrl &= ~((u_char)V_GLOB_IRQ_EN);
+        HFC_outb(hc, R_IRQ_CTRL, hc->hw.r_irq_ctrl);
+}
+
+#define NUM_EC 2
+#define MAX_TDM_CHAN 32
+
+
+inline void
+enablepcibridge(struct hfc_multi *c)
+{
+        HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x3); /* was _io before */
+}
+
+inline void
+disablepcibridge(struct hfc_multi *c)
+{
+        HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x2); /* was _io before */
+}
+
+inline unsigned char
+readpcibridge(struct hfc_multi *hc, unsigned char address)
+{
+        unsigned short cipv;
+        unsigned char data;
+
+        if (!hc->pci_iobase)
+                return 0;
+
+        /* slow down a PCI read access by 1 PCI clock cycle */
+        HFC_outb(hc, R_CTRL, 0x4); /*was _io before*/
+
+        if (address == 0)
+                cipv = 0x4000;
+        else
+                cipv = 0x5800;
+
+        /* select local bridge port address by writing to CIP port */
+        /* data = HFC_inb(c, cipv); * was _io before */
+        outw(cipv, hc->pci_iobase + 4);
+        data = inb(hc->pci_iobase);
+
+        /* restore R_CTRL for normal PCI read cycle speed */
+        HFC_outb(hc, R_CTRL, 0x0); /* was _io before */
+
+        return data;
+}
+
+inline void
+writepcibridge(struct hfc_multi *hc, unsigned char address, unsigned char data)
+{
+        unsigned short cipv;
+        unsigned int datav;
+
+        if (!hc->pci_iobase)
+                return;
+
+        if (address == 0)
+                cipv = 0x4000;
+        else
+                cipv = 0x5800;
+
+        /* select local bridge port address by writing to CIP port */
+        outw(cipv, hc->pci_iobase + 4);
+        /* define a 32 bit dword with 4 identical bytes for write sequence */
+        datav = data | ((__u32) data << 8) | ((__u32) data << 16) |
+            ((__u32) data << 24);
+
+        /*
+         * write this 32 bit dword to the bridge data port
+         * this will initiate a write sequence of up to 4 writes to the same
+         * address on the local bus interface the number of write accesses
+         * is undefined but >=1 and depends on the next PCI transaction
+         * during write sequence on the local bus
+         */
+        outl(datav, hc->pci_iobase);
+}
+
+inline void
+cpld_set_reg(struct hfc_multi *hc, unsigned char reg)
+{
+        /* Do data pin read low byte */
+        HFC_outb(hc, R_GPIO_OUT1, reg);
+}
+
+inline void
+cpld_write_reg(struct hfc_multi *hc, unsigned char reg, unsigned char val)
+{
+        cpld_set_reg(hc, reg);
+
+        enablepcibridge(hc);
+        writepcibridge(hc, 1, val);
+        disablepcibridge(hc);
+
+        return;
+}
+
+inline unsigned char
+cpld_read_reg(struct hfc_multi *hc, unsigned char reg)
+{
+        unsigned char bytein;
+
+        cpld_set_reg(hc, reg);
+
+        /* Do data pin read low byte */
+        HFC_outb(hc, R_GPIO_OUT1, reg);
+
+        enablepcibridge(hc);
+        bytein = readpcibridge(hc, 1);
+        disablepcibridge(hc);
+
+        return bytein;
+}
+
+inline void
+vpm_write_address(struct hfc_multi *hc, unsigned short addr)
+{
+        cpld_write_reg(hc, 0, 0xff & addr);
+        cpld_write_reg(hc, 1, 0x01 & (addr >> 8));
+}
+
+inline unsigned short
+vpm_read_address(struct hfc_multi *c)
+{
+        unsigned short addr;
+        unsigned short highbit;
+
+        addr = cpld_read_reg(c, 0);
+        highbit = cpld_read_reg(c, 1);
+
+        addr = addr | (highbit << 8);
+
+        return addr & 0x1ff;
+}
+
+inline unsigned char
+vpm_in(struct hfc_multi *c, int which, unsigned short addr)
+{
+        unsigned char res;
+
+        vpm_write_address(c, addr);
+
+        if (!which)
+                cpld_set_reg(c, 2);
+        else
+                cpld_set_reg(c, 3);
+
+        enablepcibridge(c);
+        res = readpcibridge(c, 1);
+        disablepcibridge(c);
+
+        cpld_set_reg(c, 0);
+
+        return res;
+}
+
+inline void
+vpm_out(struct hfc_multi *c, int which, unsigned short addr,
+    unsigned char data)
+{
+        vpm_write_address(c, addr);
+
+        enablepcibridge(c);
+
+        if (!which)
+                cpld_set_reg(c, 2);
+        else
+                cpld_set_reg(c, 3);
+
+        writepcibridge(c, 1, data);
+
+        cpld_set_reg(c, 0);
+
+        disablepcibridge(c);
+
+        {
+        unsigned char regin;
+        regin = vpm_in(c, which, addr);
+        if (regin != data)
+                printk(KERN_DEBUG "Wrote 0x%x to register 0x%x but got back "
+                        "0x%x\n", data, addr, regin);
+        }
+
+}
+
+
+void
+vpm_init(struct hfc_multi *wc)
+{
+        unsigned char reg;
+        unsigned int mask;
+        unsigned int i, x, y;
+        unsigned int ver;
+
+        for (x = 0; x < NUM_EC; x++) {
+                /* Setup GPIO's */
+                if (!x) {
+                        ver = vpm_in(wc, x, 0x1a0);
+                        printk(KERN_DEBUG "VPM: Chip %d: ver %02x\n", x, ver);
+                }
+
+                for (y = 0; y < 4; y++) {
+                        vpm_out(wc, x, 0x1a8 + y, 0x00); /* GPIO out */
+                        vpm_out(wc, x, 0x1ac + y, 0x00); /* GPIO dir */
+                        vpm_out(wc, x, 0x1b0 + y, 0x00); /* GPIO sel */
+                }
+
+                /* Setup TDM path - sets fsync and tdm_clk as inputs */
+                reg = vpm_in(wc, x, 0x1a3); /* misc_con */
+                vpm_out(wc, x, 0x1a3, reg & ~2);
+
+                /* Setup Echo length (256 taps) */
+                vpm_out(wc, x, 0x022, 1);
+                vpm_out(wc, x, 0x023, 0xff);
+
+                /* Setup timeslots */
+                vpm_out(wc, x, 0x02f, 0x00);
+                mask = 0x02020202 << (x * 4);
+
+                /* Setup the tdm channel masks for all chips */
+                for (i = 0; i < 4; i++)
+                        vpm_out(wc, x, 0x33 - i, (mask >> (i << 3)) & 0xff);
+
+                /* Setup convergence rate */
+                printk(KERN_DEBUG "VPM: A-law mode\n");
+                reg = 0x00 | 0x10 | 0x01;
+                vpm_out(wc, x, 0x20, reg);
+                printk(KERN_DEBUG "VPM reg 0x20 is %x\n", reg);
+                /*vpm_out(wc, x, 0x20, (0x00 | 0x08 | 0x20 | 0x10)); */
+
+                vpm_out(wc, x, 0x24, 0x02);
+                reg = vpm_in(wc, x, 0x24);
+                printk(KERN_DEBUG "NLP Thresh is set to %d (0x%x)\n", reg, reg);
+
+                /* Initialize echo cans */
+                for (i = 0; i < MAX_TDM_CHAN; i++) {
+                        if (mask & (0x00000001 << i))
+                                vpm_out(wc, x, i, 0x00);
+                }
+
+                /*
+                 * ARM arch at least disallows a udelay of
+                 * more than 2ms... it gives a fake "__bad_udelay"
+                 * reference at link-time.
+                 * long delays in kernel code are pretty sucky anyway
+                 * for now work around it using 5 x 2ms instead of 1 x 10ms
+                 */
+
+                udelay(2000);
+                udelay(2000);
+                udelay(2000);
+                udelay(2000);
+                udelay(2000);
+
+                /* Put in bypass mode */
+                for (i = 0; i < MAX_TDM_CHAN; i++) {
+                        if (mask & (0x00000001 << i))
+                                vpm_out(wc, x, i, 0x01);
+                }
+
+                /* Enable bypass */
+                for (i = 0; i < MAX_TDM_CHAN; i++) {
+                        if (mask & (0x00000001 << i))
+                                vpm_out(wc, x, 0x78 + i, 0x01);
+                }
+
+        }
+}
+
+void
+vpm_check(struct hfc_multi *hctmp)
+{
+        unsigned char gpi2;
+
+        gpi2 = HFC_inb(hctmp, R_GPI_IN2);
+
+        if ((gpi2 & 0x3) != 0x3)
+                printk(KERN_DEBUG "Got interrupt 0x%x from VPM!\n", gpi2);
+}
+
+
+/*
+ * Interface to enable/disable the HW Echocan
+ *
+ * these functions are called within a spin_lock_irqsave on
+ * the channel instance lock, so we are not disturbed by irqs
+ *
+ * we can later easily change the interface to make  other
+ * things configurable, for now we configure the taps
+ *
+ */
+
+void
+vpm_echocan_on(struct hfc_multi *hc, int ch, int taps)
+{
+        unsigned int timeslot;
+        unsigned int unit;
+        struct bchannel *bch = hc->chan[ch].bch;
+#ifdef TXADJ
+        int txadj = -4;
+        struct sk_buff *skb;
+#endif
+        if (hc->chan[ch].protocol != ISDN_P_B_RAW)
+                return;
+
+        if (!bch)
+                return;
+
+#ifdef TXADJ
+        skb = _alloc_mISDN_skb(PH_CONTROL_IND, HFC_VOL_CHANGE_TX,
+                sizeof(int), &txadj, GFP_ATOMIC);
+        if (skb)
+                recv_Bchannel_skb(bch, skb);
+#endif
+
+        timeslot = ((ch/4)*8) + ((ch%4)*4) + 1;
+        unit = ch % 4;
+
+        printk(KERN_NOTICE "vpm_echocan_on called taps [%d] on timeslot %d\n",
+            taps, timeslot);
+
+        vpm_out(hc, unit, timeslot, 0x7e);
+}
+
+void
+vpm_echocan_off(struct hfc_multi *hc, int ch)
+{
+        unsigned int timeslot;
+        unsigned int unit;
+        struct bchannel *bch = hc->chan[ch].bch;
+#ifdef TXADJ
+        int txadj = 0;
+        struct sk_buff *skb;
+#endif
+
+        if (hc->chan[ch].protocol != ISDN_P_B_RAW)
+                return;
+
+        if (!bch)
+                return;
+
+#ifdef TXADJ
+        skb = _alloc_mISDN_skb(PH_CONTROL_IND, HFC_VOL_CHANGE_TX,
+                sizeof(int), &txadj, GFP_ATOMIC);
+        if (skb)
+                recv_Bchannel_skb(bch, skb);
+#endif
+
+        timeslot = ((ch/4)*8) + ((ch%4)*4) + 1;
+        unit = ch % 4;
+
+        printk(KERN_NOTICE "vpm_echocan_off called on timeslot %d\n",
+            timeslot);
+        /* FILLME */
+        vpm_out(hc, unit, timeslot, 0x01);
+}
+
+
+/*
+ * Speech Design resync feature
+ * NOTE: This is called sometimes outside interrupt handler.
+ * We must lock irqsave, so no other interrupt (other card) will occurr!
+ * Also multiple interrupts may nest, so must lock each access (lists, card)!
+ */
+static inline void
+hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm)
+{
+        struct hfc_multi *hc, *next, *pcmmaster = 0;
+        u_int *plx_acc_32, pv;
+        u_long flags;
+
+        spin_lock_irqsave(&HFClock, flags);
+        spin_lock(&plx_lock); /* must be locked inside other locks */
+
+        if (debug & DEBUG_HFCMULTI_PLXSD)
+                printk(KERN_DEBUG "%s: RESYNC(syncmaster=0x%p)\n",
+                        __func__, syncmaster);
+
+        /* select new master */
+        if (newmaster) {
+                if (debug & DEBUG_HFCMULTI_PLXSD)
+                        printk(KERN_DEBUG "using provided controller\n");
+        } else {
+                list_for_each_entry_safe(hc, next, &HFClist, list) {
+                        if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+                                if (hc->syncronized) {
+                                        newmaster = hc;
+                                        break;
+                                }
+                        }
+                }
+        }
+
+        /* Disable sync of all cards */
+        list_for_each_entry_safe(hc, next, &HFClist, list) {
+                if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+                        plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+                        pv = readl(plx_acc_32);
+                        pv &= ~PLX_SYNC_O_EN;
+                        writel(pv, plx_acc_32);
+                        if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) {
+                                pcmmaster = hc;
+                                if (hc->type == 1) {
+                                        if (debug & DEBUG_HFCMULTI_PLXSD)
+                                                printk(KERN_DEBUG
+                                                        "Schedule SYNC_I\n");
+                                        hc->e1_resync |= 1; /* get SYNC_I */
+                                }
+                        }
+                }
+        }
+
+        if (newmaster) {
+                hc = newmaster;
+                if (debug & DEBUG_HFCMULTI_PLXSD)
+                        printk(KERN_DEBUG "id=%d (0x%p) = syncronized with "
+                                "interface.\n", hc->id, hc);
+                /* Enable new sync master */
+                plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+                pv = readl(plx_acc_32);
+                pv |= PLX_SYNC_O_EN;
+                writel(pv, plx_acc_32);
+                /* switch to jatt PLL, if not disabled by RX_SYNC */
+                if (hc->type == 1 && !test_bit(HFC_CHIP_RX_SYNC, &hc->chip)) {
+                        if (debug & DEBUG_HFCMULTI_PLXSD)
+                                printk(KERN_DEBUG "Schedule jatt PLL\n");
+                        hc->e1_resync |= 2; /* switch to jatt */
+                }
+        } else {
+                if (pcmmaster) {
+                        hc = pcmmaster;
+                        if (debug & DEBUG_HFCMULTI_PLXSD)
+                                printk(KERN_DEBUG
+                                        "id=%d (0x%p) = PCM master syncronized "
+                                        "with QUARTZ\n", hc->id, hc);
+                        if (hc->type == 1) {
+                                /* Use the crystal clock for the PCM
+                                   master card */
+                                if (debug & DEBUG_HFCMULTI_PLXSD)
+                                        printk(KERN_DEBUG
+                                            "Schedule QUARTZ for HFC-E1\n");
+                                hc->e1_resync |= 4; /* switch quartz */
+                        } else {
+                                if (debug & DEBUG_HFCMULTI_PLXSD)
+                                        printk(KERN_DEBUG
+                                            "QUARTZ is automatically "
+                                            "enabled by HFC-%dS\n", hc->type);
+                        }
+                        plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+                        pv = readl(plx_acc_32);
+                        pv |= PLX_SYNC_O_EN;
+                        writel(pv, plx_acc_32);
+                } else
+                        if (!rm)
+                                printk(KERN_ERR "%s no pcm master, this MUST "
+                                        "not happen!\n", __func__);
+        }
+        syncmaster = newmaster;
+
+        spin_unlock(&plx_lock);
+        spin_unlock_irqrestore(&HFClock, flags);
+}
+
+/* This must be called AND hc must be locked irqsave!!! */
+inline void
+plxsd_checksync(struct hfc_multi *hc, int rm)
+{
+        if (hc->syncronized) {
+                if (syncmaster == NULL) {
+                        if (debug & DEBUG_HFCMULTI_PLXSD)
+                                printk(KERN_WARNING "%s: GOT sync on card %d"
+                                        " (id=%d)\n", __func__, hc->id + 1,
+                                        hc->id);
+                        hfcmulti_resync(hc, hc, rm);
+                }
+        } else {
+                if (syncmaster == hc) {
+                        if (debug & DEBUG_HFCMULTI_PLXSD)
+                                printk(KERN_WARNING "%s: LOST sync on card %d"
+                                        " (id=%d)\n", __func__, hc->id + 1,
+                                        hc->id);
+                        hfcmulti_resync(hc, NULL, rm);
+                }
+        }
+}
+
+
+/*
+ * free hardware resources used by driver
+ */
+static void
+release_io_hfcmulti(struct hfc_multi *hc)
+{
+        u_int   *plx_acc_32, pv;
+        u_long  plx_flags;
+
+        if (debug & DEBUG_HFCMULTI_INIT)
+                printk(KERN_DEBUG "%s: entered\n", __func__);
+
+        /* soft reset also masks all interrupts */
+        hc->hw.r_cirm |= V_SRES;
+        HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
+        udelay(1000);
+        hc->hw.r_cirm &= ~V_SRES;
+        HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
+        udelay(1000); /* instead of 'wait' that may cause locking */
+
+        /* release Speech Design card, if PLX was initialized */
+        if (test_bit(HFC_CHIP_PLXSD, &hc->chip) && hc->plx_membase) {
+                if (debug & DEBUG_HFCMULTI_PLXSD)
+                        printk(KERN_DEBUG "%s: release PLXSD card %d\n",
+                            __func__, hc->id + 1);
+                spin_lock_irqsave(&plx_lock, plx_flags);
+                plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+                writel(PLX_GPIOC_INIT, plx_acc_32);
+                pv = readl(plx_acc_32);
+                /* Termination off */
+                pv &= ~PLX_TERM_ON;
+                /* Disconnect the PCM */
+                pv |= PLX_SLAVE_EN_N;
+                pv &= ~PLX_MASTER_EN;
+                pv &= ~PLX_SYNC_O_EN;
+                /* Put the DSP in Reset */
+                pv &= ~PLX_DSP_RES_N;
+                writel(pv, plx_acc_32);
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_WARNING "%s: PCM off: PLX_GPIO=%x\n",
+                                __func__, pv);
+                spin_unlock_irqrestore(&plx_lock, plx_flags);
+        }
+
+        /* disable memory mapped ports / io ports */
+        test_and_clear_bit(HFC_CHIP_PLXSD, &hc->chip); /* prevent resync */
+        pci_write_config_word(hc->pci_dev, PCI_COMMAND, 0);
+        if (hc->pci_membase)
+                iounmap((void *)hc->pci_membase);
+        if (hc->plx_membase)
+                iounmap((void *)hc->plx_membase);
+        if (hc->pci_iobase)
+                release_region(hc->pci_iobase, 8);
+
+        if (hc->pci_dev) {
+                pci_disable_device(hc->pci_dev);
+                pci_set_drvdata(hc->pci_dev, NULL);
+        }
+        if (debug & DEBUG_HFCMULTI_INIT)
+                printk(KERN_DEBUG "%s: done\n", __func__);
+}
+
+/*
+ * function called to reset the HFC chip. A complete software reset of chip
+ * and fifos is done. All configuration of the chip is done.
+ */
+
+static int
+init_chip(struct hfc_multi *hc)
+{
+        u_long                  flags, val, val2 = 0, rev;
+        int                     i, err = 0;
+        u_char                  r_conf_en, rval;
+        u_int                   *plx_acc_32, pv;
+        u_long                  plx_flags, hfc_flags;
+        int                     plx_count;
+        struct hfc_multi        *pos, *next, *plx_last_hc;
+
+        spin_lock_irqsave(&hc->lock, flags);
+        /* reset all registers */
+        memset(&hc->hw, 0, sizeof(struct hfcm_hw));
+
+        /* revision check */
+        if (debug & DEBUG_HFCMULTI_INIT)
+                printk(KERN_DEBUG "%s: entered\n", __func__);
+        val = HFC_inb(hc, R_CHIP_ID)>>4;
+        if (val != 0x8 && val != 0xc && val != 0xe) {
+                printk(KERN_INFO "HFC_multi: unknown CHIP_ID:%x\n", (u_int)val);
+                err = -EIO;
+                goto out;
+        }
+        rev = HFC_inb(hc, R_CHIP_RV);
+        printk(KERN_INFO
+            "HFC_multi: detected HFC with chip ID=0x%lx revision=%ld%s\n",
+            val, rev, (rev == 0) ? " (old FIFO handling)" : "");
+        if (rev == 0) {
+                test_and_set_bit(HFC_CHIP_REVISION0, &hc->chip);
+                printk(KERN_WARNING
+                    "HFC_multi: NOTE: Your chip is revision 0, "
+                    "ask Cologne Chip for update. Newer chips "
+                    "have a better FIFO handling. Old chips "
+                    "still work but may have slightly lower "
+                    "HDLC transmit performance.\n");
+        }
+        if (rev > 1) {
+                printk(KERN_WARNING "HFC_multi: WARNING: This driver doesn't "
+                    "consider chip revision = %ld. The chip / "
+                    "bridge may not work.\n", rev);
+        }
+
+        /* set s-ram size */
+        hc->Flen = 0x10;
+        hc->Zmin = 0x80;
+        hc->Zlen = 384;
+        hc->DTMFbase = 0x1000;
+        if (test_bit(HFC_CHIP_EXRAM_128, &hc->chip)) {
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_DEBUG "%s: changing to 128K extenal RAM\n",
+                            __func__);
+                hc->hw.r_ctrl |= V_EXT_RAM;
+                hc->hw.r_ram_sz = 1;
+                hc->Flen = 0x20;
+                hc->Zmin = 0xc0;
+                hc->Zlen = 1856;
+                hc->DTMFbase = 0x2000;
+        }
+        if (test_bit(HFC_CHIP_EXRAM_512, &hc->chip)) {
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_DEBUG "%s: changing to 512K extenal RAM\n",
+                            __func__);
+                hc->hw.r_ctrl |= V_EXT_RAM;
+                hc->hw.r_ram_sz = 2;
+                hc->Flen = 0x20;
+                hc->Zmin = 0xc0;
+                hc->Zlen = 8000;
+                hc->DTMFbase = 0x2000;
+        }
+        hc->max_trans = poll << 1;
+        if (hc->max_trans > hc->Zlen)
+                hc->max_trans = hc->Zlen;
+
+        /* Speech Design PLX bridge */
+        if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+                if (debug & DEBUG_HFCMULTI_PLXSD)
+                        printk(KERN_DEBUG "%s: initializing PLXSD card %d\n",
+                            __func__, hc->id + 1);
+                spin_lock_irqsave(&plx_lock, plx_flags);
+                plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+                writel(PLX_GPIOC_INIT, plx_acc_32);
+                pv = readl(plx_acc_32);
+                /* The first and the last cards are terminating the PCM bus */
+                pv |= PLX_TERM_ON; /* hc is currently the last */
+                /* Disconnect the PCM */
+                pv |= PLX_SLAVE_EN_N;
+                pv &= ~PLX_MASTER_EN;
+                pv &= ~PLX_SYNC_O_EN;
+                /* Put the DSP in Reset */
+                pv &= ~PLX_DSP_RES_N;
+                writel(pv, plx_acc_32);
+                spin_unlock_irqrestore(&plx_lock, plx_flags);
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_WARNING "%s: slave/term: PLX_GPIO=%x\n",
+                                __func__, pv);
+                /*
+                 * If we are the 3rd PLXSD card or higher, we must turn
+                 * termination of last PLXSD card off.
+                 */
+                spin_lock_irqsave(&HFClock, hfc_flags);
+                plx_count = 0;
+                plx_last_hc = NULL;
+                list_for_each_entry_safe(pos, next, &HFClist, list) {
+                        if (test_bit(HFC_CHIP_PLXSD, &pos->chip)) {
+                                plx_count++;
+                                if (pos != hc)
+                                        plx_last_hc = pos;
+                        }
+                }
+                if (plx_count >= 3) {
+                        if (debug & DEBUG_HFCMULTI_PLXSD)
+                                printk(KERN_DEBUG "%s: card %d is between, so "
+                                        "we disable termination\n",
+                                    __func__, plx_last_hc->id + 1);
+                        spin_lock_irqsave(&plx_lock, plx_flags);
+                        plx_acc_32 = (u_int *)(plx_last_hc->plx_membase
+                                        + PLX_GPIOC);
+                        pv = readl(plx_acc_32);
+                        pv &= ~PLX_TERM_ON;
+                        writel(pv, plx_acc_32);
+                        spin_unlock_irqrestore(&plx_lock, plx_flags);
+                        if (debug & DEBUG_HFCMULTI_INIT)
+                            printk(KERN_WARNING "%s: term off: PLX_GPIO=%x\n",
+                                        __func__, pv);
+                }
+                spin_unlock_irqrestore(&HFClock, hfc_flags);
+                hc->hw.r_pcm_md0 = V_F0_LEN; /* shift clock for DSP */
+        }
+
+        /* we only want the real Z2 read-pointer for revision > 0 */
+        if (!test_bit(HFC_CHIP_REVISION0, &hc->chip))
+                hc->hw.r_ram_sz |= V_FZ_MD;
+
+        /* select pcm mode */
+        if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_DEBUG "%s: setting PCM into slave mode\n",
+                            __func__);
+        } else
+        if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip) && !plxsd_master) {
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_DEBUG "%s: setting PCM into master mode\n",
+                            __func__);
+                hc->hw.r_pcm_md0 |= V_PCM_MD;
+        } else {
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_DEBUG "%s: performing PCM auto detect\n",
+                            __func__);
+        }
+
+        /* soft reset */
+        HFC_outb(hc, R_CTRL, hc->hw.r_ctrl);
+        HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
+        HFC_outb(hc, R_FIFO_MD, 0);
+        hc->hw.r_cirm = V_SRES | V_HFCRES | V_PCMRES | V_STRES | V_RLD_EPR;
+        HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
+        udelay(100);
+        hc->hw.r_cirm = 0;
+        HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
+        udelay(100);
+        HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
+
+        /* Speech Design PLX bridge pcm and sync mode */
+        if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+                spin_lock_irqsave(&plx_lock, plx_flags);
+                plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+                pv = readl(plx_acc_32);
+                /* Connect PCM */
+                if (hc->hw.r_pcm_md0 & V_PCM_MD) {
+                        pv |= PLX_MASTER_EN | PLX_SLAVE_EN_N;
+                        pv |= PLX_SYNC_O_EN;
+                        if (debug & DEBUG_HFCMULTI_INIT)
+                                printk(KERN_WARNING "%s: master: PLX_GPIO=%x\n",
+                                        __func__, pv);
+                } else {
+                        pv &= ~(PLX_MASTER_EN | PLX_SLAVE_EN_N);
+                        pv &= ~PLX_SYNC_O_EN;
+                        if (debug & DEBUG_HFCMULTI_INIT)
+                                printk(KERN_WARNING "%s: slave: PLX_GPIO=%x\n",
+                                        __func__, pv);
+                }
+                writel(pv, plx_acc_32);
+                spin_unlock_irqrestore(&plx_lock, plx_flags);
+        }
+
+        /* PCM setup */
+        HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x90);
+        if (hc->slots == 32)
+                HFC_outb(hc, R_PCM_MD1, 0x00);
+        if (hc->slots == 64)
+                HFC_outb(hc, R_PCM_MD1, 0x10);
+        if (hc->slots == 128)
+                HFC_outb(hc, R_PCM_MD1, 0x20);
+        HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0xa0);
+        if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
+                HFC_outb(hc, R_PCM_MD2, V_SYNC_SRC); /* sync via SYNC_I / O */
+        else
+                HFC_outb(hc, R_PCM_MD2, 0x00); /* sync from interface */
+        HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00);
+        for (i = 0; i < 256; i++) {
+                HFC_outb_nodebug(hc, R_SLOT, i);
+                HFC_outb_nodebug(hc, A_SL_CFG, 0);
+                HFC_outb_nodebug(hc, A_CONF, 0);
+                hc->slot_owner[i] = -1;
+        }
+
+        /* set clock speed */
+        if (test_bit(HFC_CHIP_CLOCK2, &hc->chip)) {
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_DEBUG
+                            "%s: setting double clock\n", __func__);
+                HFC_outb(hc, R_BRG_PCM_CFG, V_PCM_CLK);
+        }
+
+        /* B410P GPIO */
+        if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
+                printk(KERN_NOTICE "Setting GPIOs\n");
+                HFC_outb(hc, R_GPIO_SEL, 0x30);
+                HFC_outb(hc, R_GPIO_EN1, 0x3);
+                udelay(1000);
+                printk(KERN_NOTICE "calling vpm_init\n");
+                vpm_init(hc);
+        }
+
+        /* check if R_F0_CNT counts (8 kHz frame count) */
+        val = HFC_inb(hc, R_F0_CNTL);
+        val += HFC_inb(hc, R_F0_CNTH) << 8;
+        if (debug & DEBUG_HFCMULTI_INIT)
+                printk(KERN_DEBUG
+                    "HFC_multi F0_CNT %ld after reset\n", val);
+        spin_unlock_irqrestore(&hc->lock, flags);
+        set_current_state(TASK_UNINTERRUPTIBLE);
+        schedule_timeout((HZ/100)?:1); /* Timeout minimum 10ms */
+        spin_lock_irqsave(&hc->lock, flags);
+        val2 = HFC_inb(hc, R_F0_CNTL);
+        val2 += HFC_inb(hc, R_F0_CNTH) << 8;
+        if (debug & DEBUG_HFCMULTI_INIT)
+                printk(KERN_DEBUG
+                        "HFC_multi F0_CNT %ld after 10 ms (1st try)\n",
+                    val2);
+        if (val2 >= val+8) { /* 1 ms */
+                /* it counts, so we keep the pcm mode */
+                if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip))
+                        printk(KERN_INFO "controller is PCM bus MASTER\n");
+                else
+                if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip))
+                        printk(KERN_INFO "controller is PCM bus SLAVE\n");
+                else {
+                        test_and_set_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
+                        printk(KERN_INFO "controller is PCM bus SLAVE "
+                                "(auto detected)\n");
+                }
+        } else {
+                /* does not count */
+                if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) {
+controller_fail:
+                        printk(KERN_ERR "HFC_multi ERROR, getting no 125us "
+                            "pulse. Seems that controller fails.\n");
+                        err = -EIO;
+                        goto out;
+                }
+                if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
+                        printk(KERN_INFO "controller is PCM bus SLAVE "
+                                "(ignoring missing PCM clock)\n");
+                } else {
+                        /* only one pcm master */
+                        if (test_bit(HFC_CHIP_PLXSD, &hc->chip)
+                                && plxsd_master) {
+                                printk(KERN_ERR "HFC_multi ERROR, no clock "
+                                    "on another Speech Design card found. "
+                                    "Please be sure to connect PCM cable.\n");
+                                err = -EIO;
+                                goto out;
+                        }
+                        /* retry with master clock */
+                        if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+                                spin_lock_irqsave(&plx_lock, plx_flags);
+                                plx_acc_32 = (u_int *)(hc->plx_membase +
+                                        PLX_GPIOC);
+                                pv = readl(plx_acc_32);
+                                pv |= PLX_MASTER_EN | PLX_SLAVE_EN_N;
+                                pv |= PLX_SYNC_O_EN;
+                                writel(pv, plx_acc_32);
+                                spin_unlock_irqrestore(&plx_lock, plx_flags);
+                                if (debug & DEBUG_HFCMULTI_INIT)
+                                    printk(KERN_WARNING "%s: master: PLX_GPIO"
+                                        "=%x\n", __func__, pv);
+                        }
+                        hc->hw.r_pcm_md0 |= V_PCM_MD;
+                        HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00);
+                        spin_unlock_irqrestore(&hc->lock, flags);
+                        set_current_state(TASK_UNINTERRUPTIBLE);
+                        schedule_timeout((HZ/100)?:1); /* Timeout min. 10ms */
+                        spin_lock_irqsave(&hc->lock, flags);
+                        val2 = HFC_inb(hc, R_F0_CNTL);
+                        val2 += HFC_inb(hc, R_F0_CNTH) << 8;
+                        if (debug & DEBUG_HFCMULTI_INIT)
+                                printk(KERN_DEBUG "HFC_multi F0_CNT %ld after "
+                                        "10 ms (2nd try)\n", val2);
+                        if (val2 >= val+8) { /* 1 ms */
+                                test_and_set_bit(HFC_CHIP_PCM_MASTER,
+                                        &hc->chip);
+                                printk(KERN_INFO "controller is PCM bus MASTER "
+                                        "(auto detected)\n");
+                        } else
+                                goto controller_fail;
+                }
+        }
+
+        /* Release the DSP Reset */
+        if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+                if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip))
+                        plxsd_master = 1;
+                spin_lock_irqsave(&plx_lock, plx_flags);
+                plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+                pv = readl(plx_acc_32);
+                pv |=  PLX_DSP_RES_N;
+                writel(pv, plx_acc_32);
+                spin_unlock_irqrestore(&plx_lock, plx_flags);
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_WARNING "%s: reset off: PLX_GPIO=%x\n",
+                                __func__, pv);
+        }
+
+        /* pcm id */
+        if (hc->pcm)
+                printk(KERN_INFO "controller has given PCM BUS ID %d\n",
+                        hc->pcm);
+        else {
+                if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)
+                 || test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+                        PCM_cnt++; /* SD has proprietary bridging */
+                }
+                hc->pcm = PCM_cnt;
+                printk(KERN_INFO "controller has PCM BUS ID %d "
+                        "(auto selected)\n", hc->pcm);
+        }
+
+        /* set up timer */
+        HFC_outb(hc, R_TI_WD, poll_timer);
+        hc->hw.r_irqmsk_misc |= V_TI_IRQMSK;
+
+        /*
+         * set up 125us interrupt, only if function pointer is available
+         * and module parameter timer is set
+         */
+        if (timer && hfc_interrupt && register_interrupt) {
+                /* only one chip should use this interrupt */
+                timer = 0;
+                interrupt_registered = 1;
+                hc->hw.r_irqmsk_misc |= V_PROC_IRQMSK;
+                /* deactivate other interrupts in ztdummy */
+                register_interrupt();
+        }
+
+        /* set E1 state machine IRQ */
+        if (hc->type == 1)
+                hc->hw.r_irqmsk_misc |= V_STA_IRQMSK;
+
+        /* set DTMF detection */
+        if (test_bit(HFC_CHIP_DTMF, &hc->chip)) {
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_DEBUG "%s: enabling DTMF detection "
+                            "for all B-channel\n", __func__);
+                hc->hw.r_dtmf = V_DTMF_EN | V_DTMF_STOP;
+                if (test_bit(HFC_CHIP_ULAW, &hc->chip))
+                        hc->hw.r_dtmf |= V_ULAW_SEL;
+                HFC_outb(hc, R_DTMF_N, 102 - 1);
+                hc->hw.r_irqmsk_misc |= V_DTMF_IRQMSK;
+        }
+
+        /* conference engine */
+        if (test_bit(HFC_CHIP_ULAW, &hc->chip))
+                r_conf_en = V_CONF_EN | V_ULAW;
+        else
+                r_conf_en = V_CONF_EN;
+        HFC_outb(hc, R_CONF_EN, r_conf_en);
+
+        /* setting leds */
+        switch (hc->leds) {
+        case 1: /* HFC-E1 OEM */
+                if (test_bit(HFC_CHIP_WATCHDOG, &hc->chip))
+                        HFC_outb(hc, R_GPIO_SEL, 0x32);
+                else
+                        HFC_outb(hc, R_GPIO_SEL, 0x30);
+
+                HFC_outb(hc, R_GPIO_EN1, 0x0f);
+                HFC_outb(hc, R_GPIO_OUT1, 0x00);
+
+                HFC_outb(hc, R_GPIO_EN0, V_GPIO_EN2 | V_GPIO_EN3);
+                break;
+
+        case 2: /* HFC-4S OEM */
+        case 3:
+                HFC_outb(hc, R_GPIO_SEL, 0xf0);
+                HFC_outb(hc, R_GPIO_EN1, 0xff);
+                HFC_outb(hc, R_GPIO_OUT1, 0x00);
+                break;
+        }
+
+        /* set master clock */
+        if (hc->masterclk >= 0) {
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_DEBUG "%s: setting ST master clock "
+                            "to port %d (0..%d)\n",
+                            __func__, hc->masterclk, hc->ports-1);
+                hc->hw.r_st_sync = hc->masterclk | V_AUTO_SYNC;
+                HFC_outb(hc, R_ST_SYNC, hc->hw.r_st_sync);
+        }
+
+        /* setting misc irq */
+        HFC_outb(hc, R_IRQMSK_MISC, hc->hw.r_irqmsk_misc);
+        if (debug & DEBUG_HFCMULTI_INIT)
+                printk(KERN_DEBUG "r_irqmsk_misc.2: 0x%x\n",
+                    hc->hw.r_irqmsk_misc);
+
+        /* RAM access test */
+        HFC_outb(hc, R_RAM_ADDR0, 0);
+        HFC_outb(hc, R_RAM_ADDR1, 0);
+        HFC_outb(hc, R_RAM_ADDR2, 0);
+        for (i = 0; i < 256; i++) {
+                HFC_outb_nodebug(hc, R_RAM_ADDR0, i);
+                HFC_outb_nodebug(hc, R_RAM_DATA, ((i*3)&0xff));
+        }
+        for (i = 0; i < 256; i++) {
+                HFC_outb_nodebug(hc, R_RAM_ADDR0, i);
+                HFC_inb_nodebug(hc, R_RAM_DATA);
+                rval = HFC_inb_nodebug(hc, R_INT_DATA);
+                if (rval != ((i * 3) & 0xff)) {
+                        printk(KERN_DEBUG
+                            "addr:%x val:%x should:%x\n", i, rval,
+                            (i * 3) & 0xff);
+                        err++;
+                }
+        }
+        if (err) {
+                printk(KERN_DEBUG "aborting - %d RAM access errors\n", err);
+                err = -EIO;
+                goto out;
+        }
+
+        if (debug & DEBUG_HFCMULTI_INIT)
+                printk(KERN_DEBUG "%s: done\n", __func__);
+out:
+        spin_unlock_irqrestore(&hc->lock, flags);
+        return err;
+}
+
+
+/*
+ * control the watchdog
+ */
+static void
+hfcmulti_watchdog(struct hfc_multi *hc)
+{
+        hc->wdcount++;
+
+        if (hc->wdcount > 10) {
+                hc->wdcount = 0;
+                hc->wdbyte = hc->wdbyte == V_GPIO_OUT2 ?
+                    V_GPIO_OUT3 : V_GPIO_OUT2;
+
+        /* printk("Sending Watchdog Kill %x\n",hc->wdbyte); */
+                HFC_outb(hc, R_GPIO_EN0, V_GPIO_EN2 | V_GPIO_EN3);
+                HFC_outb(hc, R_GPIO_OUT0, hc->wdbyte);
+        }
+}
+
+
+
+/*
+ * output leds
+ */
+static void
+hfcmulti_leds(struct hfc_multi *hc)
+{
+        unsigned long lled;
+        unsigned long leddw;
+        int i, state, active, leds;
+        struct dchannel *dch;
+        int led[4];
+
+        hc->ledcount += poll;
+        if (hc->ledcount > 4096) {
+                hc->ledcount -= 4096;
+                hc->ledstate = 0xAFFEAFFE;
+        }
+
+        switch (hc->leds) {
+        case 1: /* HFC-E1 OEM */
+                /* 2 red blinking: NT mode deactivate
+                 * 2 red steady:   TE mode deactivate
+                 * left green:     L1 active
+                 * left red:       frame sync, but no L1
+                 * right green:    L2 active
+                 */
+                if (hc->chan[hc->dslot].sync != 2) { /* no frame sync */
+                        if (hc->chan[hc->dslot].dch->dev.D.protocol
+                                != ISDN_P_NT_E1) {
+                                led[0] = 1;
+                                led[1] = 1;
+                        } else if (hc->ledcount>>11) {
+                                led[0] = 1;
+                                led[1] = 1;
+                        } else {
+                                led[0] = 0;
+                                led[1] = 0;
+                        }
+                        led[2] = 0;
+                        led[3] = 0;
+                } else { /* with frame sync */
+                        /* TODO make it work */
+                        led[0] = 0;
+                        led[1] = 0;
+                        led[2] = 0;
+                        led[3] = 1;
+                }
+                leds = (led[0] | (led[1]<<2) | (led[2]<<1) | (led[3]<<3))^0xF;
+                        /* leds are inverted */
+                if (leds != (int)hc->ledstate) {
+                        HFC_outb_nodebug(hc, R_GPIO_OUT1, leds);
+                        hc->ledstate = leds;
+                }
+                break;
+
+        case 2: /* HFC-4S OEM */
+                /* red blinking = PH_DEACTIVATE NT Mode
+                 * red steady   = PH_DEACTIVATE TE Mode
+                 * green steady = PH_ACTIVATE
+                 */
+                for (i = 0; i < 4; i++) {
+                        state = 0;
+                        active = -1;
+                        dch = hc->chan[(i << 2) | 2].dch;
+                        if (dch) {
+                                state = dch->state;
+                                if (dch->dev.D.protocol == ISDN_P_NT_S0)
+                                        active = 3;
+                                else
+                                        active = 7;
+                        }
+                        if (state) {
+                                if (state == active) {
+                                        led[i] = 1; /* led green */
+                                } else
+                                        if (dch->dev.D.protocol == ISDN_P_TE_S0)
+                                                /* TE mode: led red */
+                                                led[i] = 2;
+                                        else
+                                                if (hc->ledcount>>11)
+                                                        /* led red */
+                                                        led[i] = 2;
+                                                else
+                                                        /* led off */
+                                                        led[i] = 0;
+                        } else
+                                led[i] = 0; /* led off */
+                }
+                if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
+                        leds = 0;
+                        for (i = 0; i < 4; i++) {
+                                if (led[i] == 1) {
+                                        /*green*/
+                                        leds |= (0x2 << (i * 2));
+                                } else if (led[i] == 2) {
+                                        /*red*/
+                                        leds |= (0x1 << (i * 2));
+                                }
+                        }
+                        if (leds != (int)hc->ledstate) {
+                                vpm_out(hc, 0, 0x1a8 + 3, leds);
+                                hc->ledstate = leds;
+                        }
+                } else {
+                        leds = ((led[3] > 0) << 0) | ((led[1] > 0) << 1) |
+                            ((led[0] > 0) << 2) | ((led[2] > 0) << 3) |
+                            ((led[3] & 1) << 4) | ((led[1] & 1) << 5) |
+                            ((led[0] & 1) << 6) | ((led[2] & 1) << 7);
+                        if (leds != (int)hc->ledstate) {
+                                HFC_outb_nodebug(hc, R_GPIO_EN1, leds & 0x0F);
+                                HFC_outb_nodebug(hc, R_GPIO_OUT1, leds >> 4);
+                                hc->ledstate = leds;
+                        }
+                }
+                break;
+
+        case 3: /* HFC 1S/2S Beronet */
+                /* red blinking = PH_DEACTIVATE NT Mode
+                 * red steady   = PH_DEACTIVATE TE Mode
+                 * green steady = PH_ACTIVATE
+                 */
+                for (i = 0; i < 2; i++) {
+                        state = 0;
+                        active = -1;
+                        dch = hc->chan[(i << 2) | 2].dch;
+                        if (dch) {
+                                state = dch->state;
+                                if (dch->dev.D.protocol == ISDN_P_NT_S0)
+                                        active = 3;
+                                else
+                                        active = 7;
+                        }
+                        if (state) {
+                                if (state == active) {
+                                        led[i] = 1; /* led green */
+                                } else
+                                        if (dch->dev.D.protocol == ISDN_P_TE_S0)
+                                                /* TE mode: led red */
+                                                led[i] = 2;
+                                        else
+                                                if (hc->ledcount >> 11)
+                                                        /* led red */
+                                                        led[i] = 2;
+                                                else
+                                                        /* led off */
+                                                        led[i] = 0;
+                        } else
+                                led[i] = 0; /* led off */
+                }
+
+
+                leds = (led[0] > 0) | ((led[1] > 0)<<1) | ((led[0]&1)<<2)
+                        | ((led[1]&1)<<3);
+                if (leds != (int)hc->ledstate) {
+                        HFC_outb_nodebug(hc, R_GPIO_EN1,
+                            ((led[0] > 0) << 2) | ((led[1] > 0) << 3));
+                        HFC_outb_nodebug(hc, R_GPIO_OUT1,
+                            ((led[0] & 1) << 2) | ((led[1] & 1) << 3));
+                        hc->ledstate = leds;
+                }
+                break;
+        case 8: /* HFC 8S+ Beronet */
+                lled = 0;
+
+                for (i = 0; i < 8; i++) {
+                        state = 0;
+                        active = -1;
+                        dch = hc->chan[(i << 2) | 2].dch;
+                        if (dch) {
+                                state = dch->state;
+                                if (dch->dev.D.protocol == ISDN_P_NT_S0)
+                                        active = 3;
+                                else
+                                        active = 7;
+                        }
+                        if (state) {
+                                if (state == active) {
+                                        lled |= 0 << i;
+                                } else
+                                        if (hc->ledcount >> 11)
+                                                lled |= 0 << i;
+                                        else
+                                                lled |= 1 << i;
+                        } else
+                                lled |= 1 << i;
+                }
+                leddw = lled << 24 | lled << 16 | lled << 8 | lled;
+                if (leddw != hc->ledstate) {
+                        /* HFC_outb(hc, R_BRG_PCM_CFG, 1);
+                        HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x3); */
+                        /* was _io before */
+                        HFC_outb_nodebug(hc, R_BRG_PCM_CFG, 1 | V_PCM_CLK);
+                        outw(0x4000, hc->pci_iobase + 4);
+                        outl(leddw, hc->pci_iobase);
+                        HFC_outb_nodebug(hc, R_BRG_PCM_CFG, V_PCM_CLK);
+                        hc->ledstate = leddw;
+                }
+                break;
+        }
+}
+/*
+ * read dtmf coefficients
+ */
+
+static void
+hfcmulti_dtmf(struct hfc_multi *hc)
+{
+        s32             *coeff;
+        u_int           mantissa;
+        int             co, ch;
+        struct bchannel *bch = NULL;
+        u8              exponent;
+        int             dtmf = 0;
+        int             addr;
+        u16             w_float;
+        struct sk_buff  *skb;
+        struct mISDNhead *hh;
+
+        if (debug & DEBUG_HFCMULTI_DTMF)
+                printk(KERN_DEBUG "%s: dtmf detection irq\n", __func__);
+        for (ch = 0; ch <= 31; ch++) {
+                /* only process enabled B-channels */
+                bch = hc->chan[ch].bch;
+                if (!bch)
+                        continue;
+                if (!hc->created[hc->chan[ch].port])
+                        continue;
+                if (!test_bit(FLG_TRANSPARENT, &bch->Flags))
+                        continue;
+                if (debug & DEBUG_HFCMULTI_DTMF)
+                        printk(KERN_DEBUG "%s: dtmf channel %d:",
+                                __func__, ch);
+                coeff = &(hc->chan[ch].coeff[hc->chan[ch].coeff_count * 16]);
+                dtmf = 1;
+                for (co = 0; co < 8; co++) {
+                        /* read W(n-1) coefficient */
+                        addr = hc->DTMFbase + ((co<<7) | (ch<<2));
+                        HFC_outb_nodebug(hc, R_RAM_ADDR0, addr);
+                        HFC_outb_nodebug(hc, R_RAM_ADDR1, addr>>8);
+                        HFC_outb_nodebug(hc, R_RAM_ADDR2, (addr>>16)
+                                | V_ADDR_INC);
+                        w_float = HFC_inb_nodebug(hc, R_RAM_DATA);
+                        w_float |= (HFC_inb_nodebug(hc, R_RAM_DATA) << 8);
+                        if (debug & DEBUG_HFCMULTI_DTMF)
+                                printk(" %04x", w_float);
+
+                        /* decode float (see chip doc) */
+                        mantissa = w_float & 0x0fff;
+                        if (w_float & 0x8000)
+                                mantissa |= 0xfffff000;
+                        exponent = (w_float>>12) & 0x7;
+                        if (exponent) {
+                                mantissa ^= 0x1000;
+                                mantissa <<= (exponent-1);
+                        }
+
+                        /* store coefficient */
+                        coeff[co<<1] = mantissa;
+
+                        /* read W(n) coefficient */
+                        w_float = HFC_inb_nodebug(hc, R_RAM_DATA);
+                        w_float |= (HFC_inb_nodebug(hc, R_RAM_DATA) << 8);
+                        if (debug & DEBUG_HFCMULTI_DTMF)
+                                printk(" %04x", w_float);
+
+                        /* decode float (see chip doc) */
+                        mantissa = w_float & 0x0fff;
+                        if (w_float & 0x8000)
+                                mantissa |= 0xfffff000;
+                        exponent = (w_float>>12) & 0x7;
+                        if (exponent) {
+                                mantissa ^= 0x1000;
+                                mantissa <<= (exponent-1);
+                        }
+
+                        /* store coefficient */
+                        coeff[(co<<1)|1] = mantissa;
+                }
+                if (debug & DEBUG_HFCMULTI_DTMF)
+                        printk("%s: DTMF ready %08x %08x %08x %08x "
+                            "%08x %08x %08x %08x\n", __func__,
+                            coeff[0], coeff[1], coeff[2], coeff[3],
+                            coeff[4], coeff[5], coeff[6], coeff[7]);
+                hc->chan[ch].coeff_count++;
+                if (hc->chan[ch].coeff_count == 8) {
+                        hc->chan[ch].coeff_count = 0;
+                        skb = mI_alloc_skb(512, GFP_ATOMIC);
+                        if (!skb) {
+                                printk(KERN_WARNING "%s: No memory for skb\n",
+                                    __func__);
+                                continue;
+                        }
+                        hh = mISDN_HEAD_P(skb);
+                        hh->prim = PH_CONTROL_IND;
+                        hh->id = DTMF_HFC_COEF;
+                        memcpy(skb_put(skb, 512), hc->chan[ch].coeff, 512);
+                        recv_Bchannel_skb(bch, skb);
+                }
+        }
+
+        /* restart DTMF processing */
+        hc->dtmf = dtmf;
+        if (dtmf)
+                HFC_outb_nodebug(hc, R_DTMF, hc->hw.r_dtmf | V_RST_DTMF);
+}
+
+
+/*
+ * fill fifo as much as possible
+ */
+
+static void
+hfcmulti_tx(struct hfc_multi *hc, int ch)
+{
+        int i, ii, temp, len = 0;
+        int Zspace, z1, z2; /* must be int for calculation */
+        int Fspace, f1, f2;
+        u_char *d;
+        int *txpending, slot_tx;
+        struct  bchannel *bch;
+        struct  dchannel *dch;
+        struct  sk_buff **sp = NULL;
+        int *idxp;
+
+        bch = hc->chan[ch].bch;
+        dch = hc->chan[ch].dch;
+        if ((!dch) && (!bch))
+                return;
+
+        txpending = &hc->chan[ch].txpending;
+        slot_tx = hc->chan[ch].slot_tx;
+        if (dch) {
+                if (!test_bit(FLG_ACTIVE, &dch->Flags))
+                        return;
+                sp = &dch->tx_skb;
+                idxp = &dch->tx_idx;
+        } else {
+                if (!test_bit(FLG_ACTIVE, &bch->Flags))
+                        return;
+                sp = &bch->tx_skb;
+                idxp = &bch->tx_idx;
+        }
+        if (*sp)
+                len = (*sp)->len;
+
+        if ((!len) && *txpending != 1)
+                return; /* no data */
+
+        if (test_bit(HFC_CHIP_B410P, &hc->chip) &&
+            (hc->chan[ch].protocol == ISDN_P_B_RAW) &&
+            (hc->chan[ch].slot_rx < 0) &&
+            (hc->chan[ch].slot_tx < 0))
+                HFC_outb_nodebug(hc, R_FIFO, 0x20 | (ch << 1));
+        else
+                HFC_outb_nodebug(hc, R_FIFO, ch << 1);
+        HFC_wait_nodebug(hc);
+
+        if (*txpending == 2) {
+                /* reset fifo */
+                HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F);
+                HFC_wait_nodebug(hc);
+                HFC_outb(hc, A_SUBCH_CFG, 0);
+                *txpending = 1;
+        }
+next_frame:
+        if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
+                f1 = HFC_inb_nodebug(hc, A_F1);
+                f2 = HFC_inb_nodebug(hc, A_F2);
+                while (f2 != (temp = HFC_inb_nodebug(hc, A_F2))) {
+                        if (debug & DEBUG_HFCMULTI_FIFO)
+                                printk(KERN_DEBUG
+                                    "%s(card %d): reread f2 because %d!=%d\n",
+                                    __func__, hc->id + 1, temp, f2);
+                        f2 = temp; /* repeat until F2 is equal */
+                }
+                Fspace = f2 - f1 - 1;
+                if (Fspace < 0)
+                        Fspace += hc->Flen;
+                /*
+                 * Old FIFO handling doesn't give us the current Z2 read
+                 * pointer, so we cannot send the next frame before the fifo
+                 * is empty. It makes no difference except for a slightly
+                 * lower performance.
+                 */
+                if (test_bit(HFC_CHIP_REVISION0, &hc->chip)) {
+                        if (f1 != f2)
+                                Fspace = 0;
+                        else
+                                Fspace = 1;
+                }
+                /* one frame only for ST D-channels, to allow resending */
+                if (hc->type != 1 && dch) {
+                        if (f1 != f2)
+                                Fspace = 0;
+                }
+                /* F-counter full condition */
+                if (Fspace == 0)
+                        return;
+        }
+        z1 = HFC_inw_nodebug(hc, A_Z1) - hc->Zmin;
+        z2 = HFC_inw_nodebug(hc, A_Z2) - hc->Zmin;
+        while (z2 != (temp = (HFC_inw_nodebug(hc, A_Z2) - hc->Zmin))) {
+                if (debug & DEBUG_HFCMULTI_FIFO)
+                        printk(KERN_DEBUG "%s(card %d): reread z2 because "
+                                "%d!=%d\n", __func__, hc->id + 1, temp, z2);
+                z2 = temp; /* repeat unti Z2 is equal */
+        }
+        Zspace = z2 - z1;
+        if (Zspace <= 0)
+                Zspace += hc->Zlen;
+        Zspace -= 4; /* keep not too full, so pointers will not overrun */
+        /* fill transparent data only to maxinum transparent load (minus 4) */
+        if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
+                Zspace = Zspace - hc->Zlen + hc->max_trans;
+        if (Zspace <= 0) /* no space of 4 bytes */
+                return;
+
+        /* if no data */
+        if (!len) {
+                if (z1 == z2) { /* empty */
+                        /* if done with FIFO audio data during PCM connection */
+                        if (bch && (!test_bit(FLG_HDLC, &bch->Flags)) &&
+                            *txpending && slot_tx >= 0) {
+                                if (debug & DEBUG_HFCMULTI_MODE)
+                                        printk(KERN_DEBUG
+                                            "%s: reconnecting PCM due to no "
+                                            "more FIFO data: channel %d "
+                                            "slot_tx %d\n",
+                                            __func__, ch, slot_tx);
+                                /* connect slot */
+                                HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
+                                    V_HDLC_TRP | V_IFF);
+                                HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1);
+                                HFC_wait_nodebug(hc);
+                                HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
+                                    V_HDLC_TRP | V_IFF);
+                                HFC_outb_nodebug(hc, R_FIFO, ch<<1);
+                                HFC_wait_nodebug(hc);
+                        }
+                        *txpending = 0;
+                }
+                return; /* no data */
+        }
+
+        /* if audio data and connected slot */
+        if (bch && (!test_bit(FLG_HDLC, &bch->Flags)) && (!*txpending)
+                && slot_tx >= 0) {
+                if (debug & DEBUG_HFCMULTI_MODE)
+                        printk(KERN_DEBUG "%s: disconnecting PCM due to "
+                            "FIFO data: channel %d slot_tx %d\n",
+                            __func__, ch, slot_tx);
+                /* disconnect slot */
+                HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | V_HDLC_TRP | V_IFF);
+                HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1);
+                HFC_wait_nodebug(hc);
+                HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | V_HDLC_TRP | V_IFF);
+                HFC_outb_nodebug(hc, R_FIFO, ch<<1);
+                HFC_wait_nodebug(hc);
+        }
+        *txpending = 1;
+
+        /* show activity */
+        hc->activity[hc->chan[ch].port] = 1;
+
+        /* fill fifo to what we have left */
+        ii = len;
+        if (dch || test_bit(FLG_HDLC, &bch->Flags))
+                temp = 1;
+        else
+                temp = 0;
+        i = *idxp;
+        d = (*sp)->data + i;
+        if (ii - i > Zspace)
+                ii = Zspace + i;
+        if (debug & DEBUG_HFCMULTI_FIFO)
+                printk(KERN_DEBUG "%s(card %d): fifo(%d) has %d bytes space "
+                    "left (z1=%04x, z2=%04x) sending %d of %d bytes %s\n",
+                        __func__, hc->id + 1, ch, Zspace, z1, z2, ii-i, len-i,
+                        temp ? "HDLC":"TRANS");
+
+
+        /* Have to prep the audio data */
+        hc->write_fifo(hc, d, ii - i);
+        *idxp = ii;
+
+        /* if not all data has been written */
+        if (ii != len) {
+                /* NOTE: fifo is started by the calling function */
+                return;
+        }
+
+        /* if all data has been written, terminate frame */
+        if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
+                /* increment f-counter */
+                HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_INC_F);
+                HFC_wait_nodebug(hc);
+        }
+
+        /* send confirm, since get_net_bframe will not do it with trans */
+        if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
+                confirm_Bsend(bch);
+
+        /* check for next frame */
+        dev_kfree_skb(*sp);
+        if (bch && get_next_bframe(bch)) { /* hdlc is confirmed here */
+                len = (*sp)->len;
+                goto next_frame;
+        }
+        if (dch && get_next_dframe(dch)) {
+                len = (*sp)->len;
+                goto next_frame;
+        }
+
+        /*
+         * now we have no more data, so in case of transparent,
+         * we set the last byte in fifo to 'silence' in case we will get
+         * no more data at all. this prevents sending an undefined value.
+         */
+        if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
+                HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, silence);
+}
+
+
+/* NOTE: only called if E1 card is in active state */
+static void
+hfcmulti_rx(struct hfc_multi *hc, int ch)
+{
+        int temp;
+        int Zsize, z1, z2 = 0; /* = 0, to make GCC happy */
+        int f1 = 0, f2 = 0; /* = 0, to make GCC happy */
+        int again = 0;
+        struct  bchannel *bch;
+        struct  dchannel *dch;
+        struct sk_buff  *skb, **sp = NULL;
+        int     maxlen;
+
+        bch = hc->chan[ch].bch;
+        dch = hc->chan[ch].dch;
+        if ((!dch) && (!bch))
+                return;
+        if (dch) {
+                if (!test_bit(FLG_ACTIVE, &dch->Flags))
+                        return;
+                sp = &dch->rx_skb;
+                maxlen = dch->maxlen;
+        } else {
+                if (!test_bit(FLG_ACTIVE, &bch->Flags))
+                        return;
+                sp = &bch->rx_skb;
+                maxlen = bch->maxlen;
+        }
+next_frame:
+        /* on first AND before getting next valid frame, R_FIFO must be written
+           to. */
+        if (test_bit(HFC_CHIP_B410P, &hc->chip) &&
+            (hc->chan[ch].protocol == ISDN_P_B_RAW) &&
+            (hc->chan[ch].slot_rx < 0) &&
+            (hc->chan[ch].slot_tx < 0))
+                HFC_outb_nodebug(hc, R_FIFO, 0x20 | (ch<<1) | 1);
+        else
+                HFC_outb_nodebug(hc, R_FIFO, (ch<<1)|1);
+        HFC_wait_nodebug(hc);
+
+        /* ignore if rx is off BUT change fifo (above) to start pending TX */
+        if (hc->chan[ch].rx_off)
+                return;
+
+        if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
+                f1 = HFC_inb_nodebug(hc, A_F1);
+                while (f1 != (temp = HFC_inb_nodebug(hc, A_F1))) {
+                        if (debug & DEBUG_HFCMULTI_FIFO)
+                                printk(KERN_DEBUG
+                                    "%s(card %d): reread f1 because %d!=%d\n",
+                                    __func__, hc->id + 1, temp, f1);
+                        f1 = temp; /* repeat until F1 is equal */
+                }
+                f2 = HFC_inb_nodebug(hc, A_F2);
+        }
+        z1 = HFC_inw_nodebug(hc, A_Z1) - hc->Zmin;
+        while (z1 != (temp = (HFC_inw_nodebug(hc, A_Z1) - hc->Zmin))) {
+                if (debug & DEBUG_HFCMULTI_FIFO)
+                        printk(KERN_DEBUG "%s(card %d): reread z2 because "
+                                "%d!=%d\n", __func__, hc->id + 1, temp, z2);
+                z1 = temp; /* repeat until Z1 is equal */
+        }
+        z2 = HFC_inw_nodebug(hc, A_Z2) - hc->Zmin;
+        Zsize = z1 - z2;
+        if ((dch || test_bit(FLG_HDLC, &bch->Flags)) && f1 != f2)
+                /* complete hdlc frame */
+                Zsize++;
+        if (Zsize < 0)
+                Zsize += hc->Zlen;
+        /* if buffer is empty */
+        if (Zsize <= 0)
+                return;
+
+        if (*sp == NULL) {
+                *sp = mI_alloc_skb(maxlen + 3, GFP_ATOMIC);
+                if (*sp == NULL) {
+                        printk(KERN_DEBUG "%s: No mem for rx_skb\n",
+                            __func__);
+                        return;
+                }
+        }
+        /* show activity */
+        hc->activity[hc->chan[ch].port] = 1;
+
+        /* empty fifo with what we have */
+        if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
+                if (debug & DEBUG_HFCMULTI_FIFO)
+                        printk(KERN_DEBUG "%s(card %d): fifo(%d) reading %d "
+                            "bytes (z1=%04x, z2=%04x) HDLC %s (f1=%d, f2=%d) "
+                            "got=%d (again %d)\n", __func__, hc->id + 1, ch,
+                            Zsize, z1, z2, (f1 == f2) ? "fragment" : "COMPLETE",
+                            f1, f2, Zsize + (*sp)->len, again);
+                /* HDLC */
+                if ((Zsize + (*sp)->len) > (maxlen + 3)) {
+                        if (debug & DEBUG_HFCMULTI_FIFO)
+                                printk(KERN_DEBUG
+                                    "%s(card %d): hdlc-frame too large.\n",
+                                    __func__, hc->id + 1);
+                        skb_trim(*sp, 0);
+                        HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F);
+                        HFC_wait_nodebug(hc);
+                        return;
+                }
+
+                hc->read_fifo(hc, skb_put(*sp, Zsize), Zsize);
+
+                if (f1 != f2) {
+                        /* increment Z2,F2-counter */
+                        HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_INC_F);
+                        HFC_wait_nodebug(hc);
+                        /* check size */
+                        if ((*sp)->len < 4) {
+                                if (debug & DEBUG_HFCMULTI_FIFO)
+                                        printk(KERN_DEBUG
+                                            "%s(card %d): Frame below minimum "
+                                            "size\n", __func__, hc->id + 1);
+                                skb_trim(*sp, 0);
+                                goto next_frame;
+                        }
+                        /* there is at least one complete frame, check crc */
+                        if ((*sp)->data[(*sp)->len - 1]) {
+                                if (debug & DEBUG_HFCMULTI_CRC)
+                                        printk(KERN_DEBUG
+                                            "%s: CRC-error\n", __func__);
+                                skb_trim(*sp, 0);
+                                goto next_frame;
+                        }
+                        skb_trim(*sp, (*sp)->len - 3);
+                        if ((*sp)->len < MISDN_COPY_SIZE) {
+                                skb = *sp;
+                                *sp = mI_alloc_skb(skb->len, GFP_ATOMIC);
+                                if (*sp) {
+                                        memcpy(skb_put(*sp, skb->len),
+                                            skb->data, skb->len);
+                                        skb_trim(skb, 0);
+                                } else {
+                                        printk(KERN_DEBUG "%s: No mem\n",
+                                            __func__);
+                                        *sp = skb;
+                                        skb = NULL;
+                                }
+                        } else {
+                                skb = NULL;
+                        }
+                        if (debug & DEBUG_HFCMULTI_FIFO) {
+                                printk(KERN_DEBUG "%s(card %d):",
+                                        __func__, hc->id + 1);
+                                temp = 0;
+                                while (temp < (*sp)->len)
+                                        printk(" %02x", (*sp)->data[temp++]);
+                                printk("\n");
+                        }
+                        if (dch)
+                                recv_Dchannel(dch);
+                        else
+                                recv_Bchannel(bch);
+                        *sp = skb;
+                        again++;
+                        goto next_frame;
+                }
+                /* there is an incomplete frame */
+        } else {
+                /* transparent */
+                if (Zsize > skb_tailroom(*sp))
+                        Zsize = skb_tailroom(*sp);
+                hc->read_fifo(hc, skb_put(*sp, Zsize), Zsize);
+                if (((*sp)->len) < MISDN_COPY_SIZE) {
+                        skb = *sp;
+                        *sp = mI_alloc_skb(skb->len, GFP_ATOMIC);
+                        if (*sp) {
+                                memcpy(skb_put(*sp, skb->len),
+                                    skb->data, skb->len);
+                                skb_trim(skb, 0);
+                        } else {
+                                printk(KERN_DEBUG "%s: No mem\n", __func__);
+                                *sp = skb;
+                                skb = NULL;
+                        }
+                } else {
+                        skb = NULL;
+                }
+                if (debug & DEBUG_HFCMULTI_FIFO)
+                        printk(KERN_DEBUG
+                            "%s(card %d): fifo(%d) reading %d bytes "
+                            "(z1=%04x, z2=%04x) TRANS\n",
+                                __func__, hc->id + 1, ch, Zsize, z1, z2);
+                /* only bch is transparent */
+                recv_Bchannel(bch);
+                *sp = skb;
+        }
+}
+
+
+/*
+ * Interrupt handler
+ */
+static void
+signal_state_up(struct dchannel *dch, int info, char *msg)
+{
+        struct sk_buff  *skb;
+        int             id, data = info;
+
+        if (debug & DEBUG_HFCMULTI_STATE)
+                printk(KERN_DEBUG "%s: %s\n", __func__, msg);
+
+        id = TEI_SAPI | (GROUP_TEI << 8); /* manager address */
+
+        skb = _alloc_mISDN_skb(MPH_INFORMATION_IND, id, sizeof(data), &data,
+                GFP_ATOMIC);
+        if (!skb)
+                return;
+        recv_Dchannel_skb(dch, skb);
+}
+
+static inline void
+handle_timer_irq(struct hfc_multi *hc)
+{
+        int             ch, temp;
+        struct dchannel *dch;
+        u_long          flags;
+
+        /* process queued resync jobs */
+        if (hc->e1_resync) {
+                /* lock, so e1_resync gets not changed */
+                spin_lock_irqsave(&HFClock, flags);
+                if (hc->e1_resync & 1) {
+                        if (debug & DEBUG_HFCMULTI_PLXSD)
+                                printk(KERN_DEBUG "Enable SYNC_I\n");
+                        HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC);
+                        /* disable JATT, if RX_SYNC is set */
+                        if (test_bit(HFC_CHIP_RX_SYNC, &hc->chip))
+                                HFC_outb(hc, R_SYNC_OUT, V_SYNC_E1_RX);
+                }
+                if (hc->e1_resync & 2) {
+                        if (debug & DEBUG_HFCMULTI_PLXSD)
+                                printk(KERN_DEBUG "Enable jatt PLL\n");
+                        HFC_outb(hc, R_SYNC_CTRL, V_SYNC_OFFS);
+                }
+                if (hc->e1_resync & 4) {
+                        if (debug & DEBUG_HFCMULTI_PLXSD)
+                                printk(KERN_DEBUG
+                                    "Enable QUARTZ for HFC-E1\n");
+                        /* set jatt to quartz */
+                        HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC
+                                | V_JATT_OFF);
+                        /* switch to JATT, in case it is not already */
+                        HFC_outb(hc, R_SYNC_OUT, 0);
+                }
+                hc->e1_resync = 0;
+                spin_unlock_irqrestore(&HFClock, flags);
+        }
+
+        if (hc->type != 1 || hc->e1_state == 1)
+                for (ch = 0; ch <= 31; ch++) {
+                        if (hc->created[hc->chan[ch].port]) {
+                                hfcmulti_tx(hc, ch);
+                                /* fifo is started when switching to rx-fifo */
+                                hfcmulti_rx(hc, ch);
+                                if (hc->chan[ch].dch &&
+                                    hc->chan[ch].nt_timer > -1) {
+                                        dch = hc->chan[ch].dch;
+                                        if (!(--hc->chan[ch].nt_timer)) {
+                                                schedule_event(dch,
+                                                    FLG_PHCHANGE);
+                                                if (debug &
+                                                    DEBUG_HFCMULTI_STATE)
+                                                        printk(KERN_DEBUG
+                                                            "%s: nt_timer at "
+                                                            "state %x\n",
+                                                            __func__,
+                                                            dch->state);
+                                        }
+                                }
+                        }
+                }
+        if (hc->type == 1 && hc->created[0]) {
+                dch = hc->chan[hc->dslot].dch;
+                if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) {
+                        /* LOS */
+                        temp = HFC_inb_nodebug(hc, R_SYNC_STA) & V_SIG_LOS;
+                        if (!temp && hc->chan[hc->dslot].los)
+                                signal_state_up(dch, L1_SIGNAL_LOS_ON,
+                                    "LOS detected");
+                        if (temp && !hc->chan[hc->dslot].los)
+                                signal_state_up(dch, L1_SIGNAL_LOS_OFF,
+                                    "LOS gone");
+                        hc->chan[hc->dslot].los = temp;
+                }
+                if (test_bit(HFC_CFG_REPORT_AIS, &hc->chan[hc->dslot].cfg)) {
+                        /* AIS */
+                        temp = HFC_inb_nodebug(hc, R_SYNC_STA) & V_AIS;
+                        if (!temp && hc->chan[hc->dslot].ais)
+                                signal_state_up(dch, L1_SIGNAL_AIS_ON,
+                                    "AIS detected");
+                        if (temp && !hc->chan[hc->dslot].ais)
+                                signal_state_up(dch, L1_SIGNAL_AIS_OFF,
+                                    "AIS gone");
+                        hc->chan[hc->dslot].ais = temp;
+                }
+                if (test_bit(HFC_CFG_REPORT_SLIP, &hc->chan[hc->dslot].cfg)) {
+                        /* SLIP */
+                        temp = HFC_inb_nodebug(hc, R_SLIP) & V_FOSLIP_RX;
+                        if (!temp && hc->chan[hc->dslot].slip_rx)
+                                signal_state_up(dch, L1_SIGNAL_SLIP_RX,
+                                    " bit SLIP detected RX");
+                        hc->chan[hc->dslot].slip_rx = temp;
+                        temp = HFC_inb_nodebug(hc, R_SLIP) & V_FOSLIP_TX;
+                        if (!temp && hc->chan[hc->dslot].slip_tx)
+                                signal_state_up(dch, L1_SIGNAL_SLIP_TX,
+                                    " bit SLIP detected TX");
+                        hc->chan[hc->dslot].slip_tx = temp;
+                }
+                if (test_bit(HFC_CFG_REPORT_RDI, &hc->chan[hc->dslot].cfg)) {
+                        /* RDI */
+                        temp = HFC_inb_nodebug(hc, R_RX_SL0_0) & V_A;
+                        if (!temp && hc->chan[hc->dslot].rdi)
+                                signal_state_up(dch, L1_SIGNAL_RDI_ON,
+                                    "RDI detected");
+                        if (temp && !hc->chan[hc->dslot].rdi)
+                                signal_state_up(dch, L1_SIGNAL_RDI_OFF,
+                                    "RDI gone");
+                        hc->chan[hc->dslot].rdi = temp;
+                }
+                temp = HFC_inb_nodebug(hc, R_JATT_DIR);
+                switch (hc->chan[hc->dslot].sync) {
+                case 0:
+                        if ((temp & 0x60) == 0x60) {
+                                if (debug & DEBUG_HFCMULTI_SYNC)
+                                        printk(KERN_DEBUG
+                                            "%s: (id=%d) E1 now "
+                                            "in clock sync\n",
+                                            __func__, hc->id);
+                                HFC_outb(hc, R_RX_OFF,
+                                    hc->chan[hc->dslot].jitter | V_RX_INIT);
+                                HFC_outb(hc, R_TX_OFF,
+                                    hc->chan[hc->dslot].jitter | V_RX_INIT);
+                                hc->chan[hc->dslot].sync = 1;
+                                goto check_framesync;
+                        }
+                        break;
+                case 1:
+                        if ((temp & 0x60) != 0x60) {
+                                if (debug & DEBUG_HFCMULTI_SYNC)
+                                        printk(KERN_DEBUG
+                                            "%s: (id=%d) E1 "
+                                            "lost clock sync\n",
+                                            __func__, hc->id);
+                                hc->chan[hc->dslot].sync = 0;
+                                break;
+                        }
+check_framesync:
+                        temp = HFC_inb_nodebug(hc, R_SYNC_STA);
+                        if (temp == 0x27) {
+                                if (debug & DEBUG_HFCMULTI_SYNC)
+                                        printk(KERN_DEBUG
+                                            "%s: (id=%d) E1 "
+                                            "now in frame sync\n",
+                                            __func__, hc->id);
+                                hc->chan[hc->dslot].sync = 2;
+                        }
+                        break;
+                case 2:
+                        if ((temp & 0x60) != 0x60) {
+                                if (debug & DEBUG_HFCMULTI_SYNC)
+                                        printk(KERN_DEBUG
+                                            "%s: (id=%d) E1 lost "
+                                            "clock & frame sync\n",
+                                            __func__, hc->id);
+                                hc->chan[hc->dslot].sync = 0;
+                                break;
+                        }
+                        temp = HFC_inb_nodebug(hc, R_SYNC_STA);
+                        if (temp != 0x27) {
+                                if (debug & DEBUG_HFCMULTI_SYNC)
+                                        printk(KERN_DEBUG
+                                            "%s: (id=%d) E1 "
+                                            "lost frame sync\n",
+                                            __func__, hc->id);
+                                hc->chan[hc->dslot].sync = 1;
+                        }
+                        break;
+                }
+        }
+
+        if (test_bit(HFC_CHIP_WATCHDOG, &hc->chip))
+                hfcmulti_watchdog(hc);
+
+        if (hc->leds)
+                hfcmulti_leds(hc);
+}
+
+static void
+ph_state_irq(struct hfc_multi *hc, u_char r_irq_statech)
+{
+        struct dchannel *dch;
+        int             ch;
+        int             active;
+        u_char          st_status, temp;
+
+        /* state machine */
+        for (ch = 0; ch <= 31; ch++) {
+                if (hc->chan[ch].dch) {
+                        dch = hc->chan[ch].dch;
+                        if (r_irq_statech & 1) {
+                                HFC_outb_nodebug(hc, R_ST_SEL,
+                                        hc->chan[ch].port);
+                                /* undocumented: delay after R_ST_SEL */
+                                udelay(1);
+                                /* undocumented: status changes during read */
+                                st_status = HFC_inb_nodebug(hc, A_ST_RD_STATE);
+                                while (st_status != (temp =
+                                        HFC_inb_nodebug(hc, A_ST_RD_STATE))) {
+                                        if (debug & DEBUG_HFCMULTI_STATE)
+                                                printk(KERN_DEBUG "%s: reread "
+                                                    "STATE because %d!=%d\n",
+                                                    __func__, temp,
+                                                    st_status);
+                                        st_status = temp; /* repeat */
+                                }
+
+                                /* Speech Design TE-sync indication */
+                                if (test_bit(HFC_CHIP_PLXSD, &hc->chip) &&
+                                        dch->dev.D.protocol == ISDN_P_TE_S0) {
+                                        if (st_status & V_FR_SYNC_ST)
+                                                hc->syncronized |=
+                                                    (1 << hc->chan[ch].port);
+                                        else
+                                                hc->syncronized &=
+                                                   ~(1 << hc->chan[ch].port);
+                                }
+                                dch->state = st_status & 0x0f;
+                                if (dch->dev.D.protocol == ISDN_P_NT_S0)
+                                        active = 3;
+                                else
+                                        active = 7;
+                                if (dch->state == active) {
+                                        HFC_outb_nodebug(hc, R_FIFO,
+                                                (ch << 1) | 1);
+                                        HFC_wait_nodebug(hc);
+                                        HFC_outb_nodebug(hc,
+                                                R_INC_RES_FIFO, V_RES_F);
+                                        HFC_wait_nodebug(hc);
+                                        dch->tx_idx = 0;
+                                }
+                                schedule_event(dch, FLG_PHCHANGE);
+                                if (debug & DEBUG_HFCMULTI_STATE)
+                                        printk(KERN_DEBUG
+                                            "%s: S/T newstate %x port %d\n",
+                                            __func__, dch->state,
+                                            hc->chan[ch].port);
+                        }
+                        r_irq_statech >>= 1;
+                }
+        }
+        if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
+                plxsd_checksync(hc, 0);
+}
+
+static void
+fifo_irq(struct hfc_multi *hc, int block)
+{
+        int     ch, j;
+        struct dchannel *dch;
+        struct bchannel *bch;
+        u_char r_irq_fifo_bl;
+
+        r_irq_fifo_bl = HFC_inb_nodebug(hc, R_IRQ_FIFO_BL0 + block);
+        j = 0;
+        while (j < 8) {
+                ch = (block << 2) + (j >> 1);
+                dch = hc->chan[ch].dch;
+                bch = hc->chan[ch].bch;
+                if (((!dch) && (!bch)) || (!hc->created[hc->chan[ch].port])) {
+                        j += 2;
+                        continue;
+                }
+                if (dch && (r_irq_fifo_bl & (1 << j)) &&
+                    test_bit(FLG_ACTIVE, &dch->Flags)) {
+                        hfcmulti_tx(hc, ch);
+                        /* start fifo */
+                        HFC_outb_nodebug(hc, R_FIFO, 0);
+                        HFC_wait_nodebug(hc);
+                }
+                if (bch && (r_irq_fifo_bl & (1 << j)) &&
+                    test_bit(FLG_ACTIVE, &bch->Flags)) {
+                        hfcmulti_tx(hc, ch);
+                        /* start fifo */
+                        HFC_outb_nodebug(hc, R_FIFO, 0);
+                        HFC_wait_nodebug(hc);
+                }
+                j++;
+                if (dch && (r_irq_fifo_bl & (1 << j)) &&
+                    test_bit(FLG_ACTIVE, &dch->Flags)) {
+                        hfcmulti_rx(hc, ch);
+                }
+                if (bch && (r_irq_fifo_bl & (1 << j)) &&
+                    test_bit(FLG_ACTIVE, &bch->Flags)) {
+                        hfcmulti_rx(hc, ch);
+                }
+                j++;
+        }
+}
+
+#ifdef IRQ_DEBUG
+int irqsem;
+#endif
+static irqreturn_t
+hfcmulti_interrupt(int intno, void *dev_id)
+{
+#ifdef IRQCOUNT_DEBUG
+        static int iq1 = 0, iq2 = 0, iq3 = 0, iq4 = 0,
+            iq5 = 0, iq6 = 0, iqcnt = 0;
+#endif
+        static int              count;
+        struct hfc_multi        *hc = dev_id;
+        struct dchannel         *dch;
+        u_char                  r_irq_statech, status, r_irq_misc, r_irq_oview;
+        int                     i;
+        u_short                 *plx_acc, wval;
+        u_char                  e1_syncsta, temp;
+        u_long                  flags;
+
+        if (!hc) {
+                printk(KERN_ERR "HFC-multi: Spurious interrupt!\n");
+                return IRQ_NONE;
+        }
+
+        spin_lock(&hc->lock);
+
+#ifdef IRQ_DEBUG
+        if (irqsem)
+                printk(KERN_ERR "irq for card %d during irq from "
+                "card %d, this is no bug.\n", hc->id + 1, irqsem);
+        irqsem = hc->id + 1;
+#endif
+
+        if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+                spin_lock_irqsave(&plx_lock, flags);
+                plx_acc = (u_short *)(hc->plx_membase + PLX_INTCSR);
+                wval = readw(plx_acc);
+                spin_unlock_irqrestore(&plx_lock, flags);
+                if (!(wval & PLX_INTCSR_LINTI1_STATUS))
+                        goto irq_notforus;
+        }
+
+        status = HFC_inb_nodebug(hc, R_STATUS);
+        r_irq_statech = HFC_inb_nodebug(hc, R_IRQ_STATECH);
+#ifdef IRQCOUNT_DEBUG
+        if (r_irq_statech)
+                iq1++;
+        if (status & V_DTMF_STA)
+                iq2++;
+        if (status & V_LOST_STA)
+                iq3++;
+        if (status & V_EXT_IRQSTA)
+                iq4++;
+        if (status & V_MISC_IRQSTA)
+                iq5++;
+        if (status & V_FR_IRQSTA)
+                iq6++;
+        if (iqcnt++ > 5000) {
+                printk(KERN_ERR "iq1:%x iq2:%x iq3:%x iq4:%x iq5:%x iq6:%x\n",
+                    iq1, iq2, iq3, iq4, iq5, iq6);
+                iqcnt = 0;
+        }
+#endif
+        if (!r_irq_statech &&
+            !(status & (V_DTMF_STA | V_LOST_STA | V_EXT_IRQSTA |
+            V_MISC_IRQSTA | V_FR_IRQSTA))) {
+                /* irq is not for us */
+                goto irq_notforus;
+        }
+        hc->irqcnt++;
+        if (r_irq_statech) {
+                if (hc->type != 1)
+                        ph_state_irq(hc, r_irq_statech);
+        }
+        if (status & V_EXT_IRQSTA)
+                ; /* external IRQ */
+        if (status & V_LOST_STA) {
+                /* LOST IRQ */
+                HFC_outb(hc, R_INC_RES_FIFO, V_RES_LOST); /* clear irq! */
+        }
+        if (status & V_MISC_IRQSTA) {
+                /* misc IRQ */
+                r_irq_misc = HFC_inb_nodebug(hc, R_IRQ_MISC);
+                if (r_irq_misc & V_STA_IRQ) {
+                        if (hc->type == 1) {
+                                /* state machine */
+                                dch = hc->chan[hc->dslot].dch;
+                                e1_syncsta = HFC_inb_nodebug(hc, R_SYNC_STA);
+                                if (test_bit(HFC_CHIP_PLXSD, &hc->chip)
+                                 && hc->e1_getclock) {
+                                        if (e1_syncsta & V_FR_SYNC_E1)
+                                                hc->syncronized = 1;
+                                        else
+                                                hc->syncronized = 0;
+                                }
+                                /* undocumented: status changes during read */
+                                dch->state = HFC_inb_nodebug(hc, R_E1_RD_STA);
+                                while (dch->state != (temp =
+                                        HFC_inb_nodebug(hc, R_E1_RD_STA))) {
+                                        if (debug & DEBUG_HFCMULTI_STATE)
+                                                printk(KERN_DEBUG "%s: reread "
+                                                    "STATE because %d!=%d\n",
+                                                    __func__, temp,
+                                                    dch->state);
+                                        dch->state = temp; /* repeat */
+                                }
+                                dch->state = HFC_inb_nodebug(hc, R_E1_RD_STA)
+                                        & 0x7;
+                                schedule_event(dch, FLG_PHCHANGE);
+                                if (debug & DEBUG_HFCMULTI_STATE)
+                                        printk(KERN_DEBUG
+                                            "%s: E1 (id=%d) newstate %x\n",
+                                            __func__, hc->id, dch->state);
+                                if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
+                                        plxsd_checksync(hc, 0);
+                        }
+                }
+                if (r_irq_misc & V_TI_IRQ)
+                        handle_timer_irq(hc);
+
+                if (r_irq_misc & V_DTMF_IRQ) {
+                        /* -> DTMF IRQ */
+                        hfcmulti_dtmf(hc);
+                }
+                /* TODO: REPLACE !!!! 125 us Interrupts are not acceptable  */
+                if (r_irq_misc & V_IRQ_PROC) {
+                        /* IRQ every 125us */
+                        count++;
+                        /* generate 1kHz signal */
+                        if (count == 8) {
+                                if (hfc_interrupt)
+                                        hfc_interrupt();
+                                count = 0;
+                        }
+                }
+
+        }
+        if (status & V_FR_IRQSTA) {
+                /* FIFO IRQ */
+                r_irq_oview = HFC_inb_nodebug(hc, R_IRQ_OVIEW);
+                for (i = 0; i < 8; i++) {
+                        if (r_irq_oview & (1 << i))
+                                fifo_irq(hc, i);
+                }
+        }
+
+#ifdef IRQ_DEBUG
+        irqsem = 0;
+#endif
+        spin_unlock(&hc->lock);
+        return IRQ_HANDLED;
+
+irq_notforus:
+#ifdef IRQ_DEBUG
+        irqsem = 0;
+#endif
+        spin_unlock(&hc->lock);
+        return IRQ_NONE;
+}
+
+
+/*
+ * timer callback for D-chan busy resolution. Currently no function
+ */
+
+static void
+hfcmulti_dbusy_timer(struct hfc_multi *hc)
+{
+}
+
+
+/*
+ * activate/deactivate hardware for selected channels and mode
+ *
+ * configure B-channel with the given protocol
+ * ch eqals to the HFC-channel (0-31)
+ * ch is the number of channel (0-4,4-7,8-11,12-15,16-19,20-23,24-27,28-31
+ * for S/T, 1-31 for E1)
+ * the hdlc interrupts will be set/unset
+ */
+static int
+mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
+    int bank_tx, int slot_rx, int bank_rx)
+{
+        int flow_tx = 0, flow_rx = 0, routing = 0;
+        int oslot_tx, oslot_rx;
+        int conf;
+
+        if (ch < 0 || ch > 31)
+                return EINVAL;
+        oslot_tx = hc->chan[ch].slot_tx;
+        oslot_rx = hc->chan[ch].slot_rx;
+        conf = hc->chan[ch].conf;
+
+        if (debug & DEBUG_HFCMULTI_MODE)
+                printk(KERN_DEBUG
+                    "%s: card %d channel %d protocol %x slot old=%d new=%d "
+                    "bank new=%d (TX) slot old=%d new=%d bank new=%d (RX)\n",
+                    __func__, hc->id, ch, protocol, oslot_tx, slot_tx,
+                    bank_tx, oslot_rx, slot_rx, bank_rx);
+
+        if (oslot_tx >= 0 && slot_tx != oslot_tx) {
+                /* remove from slot */
+                if (debug & DEBUG_HFCMULTI_MODE)
+                        printk(KERN_DEBUG "%s: remove from slot %d (TX)\n",
+                            __func__, oslot_tx);
+                if (hc->slot_owner[oslot_tx<<1] == ch) {
+                        HFC_outb(hc, R_SLOT, oslot_tx << 1);
+                        HFC_outb(hc, A_SL_CFG, 0);
+                        HFC_outb(hc, A_CONF, 0);
+                        hc->slot_owner[oslot_tx<<1] = -1;
+                } else {
+                        if (debug & DEBUG_HFCMULTI_MODE)
+                                printk(KERN_DEBUG
+                                    "%s: we are not owner of this tx slot "
+                                    "anymore, channel %d is.\n",
+                                    __func__, hc->slot_owner[oslot_tx<<1]);
+                }
+        }
+
+        if (oslot_rx >= 0 && slot_rx != oslot_rx) {
+                /* remove from slot */
+                if (debug & DEBUG_HFCMULTI_MODE)
+                        printk(KERN_DEBUG
+                            "%s: remove from slot %d (RX)\n",
+                            __func__, oslot_rx);
+                if (hc->slot_owner[(oslot_rx << 1) | 1] == ch) {
+                        HFC_outb(hc, R_SLOT, (oslot_rx << 1) | V_SL_DIR);
+                        HFC_outb(hc, A_SL_CFG, 0);
+                        hc->slot_owner[(oslot_rx << 1) | 1] = -1;
+                } else {
+                        if (debug & DEBUG_HFCMULTI_MODE)
+                                printk(KERN_DEBUG
+                                    "%s: we are not owner of this rx slot "
+                                    "anymore, channel %d is.\n",
+                                    __func__,
+                                    hc->slot_owner[(oslot_rx << 1) | 1]);
+                }
+        }
+
+        if (slot_tx < 0) {
+                flow_tx = 0x80; /* FIFO->ST */
+                /* disable pcm slot */
+                hc->chan[ch].slot_tx = -1;
+                hc->chan[ch].bank_tx = 0;
+        } else {
+                /* set pcm slot */
+                if (hc->chan[ch].txpending)
+                        flow_tx = 0x80; /* FIFO->ST */
+                else
+                        flow_tx = 0xc0; /* PCM->ST */
+                /* put on slot */
+                routing = bank_tx ? 0xc0 : 0x80;
+                if (conf >= 0 || bank_tx > 1)
+                        routing = 0x40; /* loop */
+                if (debug & DEBUG_HFCMULTI_MODE)
+                        printk(KERN_DEBUG "%s: put channel %d to slot %d bank"
+                            " %d flow %02x routing %02x conf %d (TX)\n",
+                            __func__, ch, slot_tx, bank_tx,
+                            flow_tx, routing, conf);
+                HFC_outb(hc, R_SLOT, slot_tx << 1);
+                HFC_outb(hc, A_SL_CFG, (ch<<1) | routing);
+                HFC_outb(hc, A_CONF, (conf < 0) ? 0 : (conf | V_CONF_SL));
+                hc->slot_owner[slot_tx << 1] = ch;
+                hc->chan[ch].slot_tx = slot_tx;
+                hc->chan[ch].bank_tx = bank_tx;
+        }
+        if (slot_rx < 0) {
+                /* disable pcm slot */
+                flow_rx = 0x80; /* ST->FIFO */
+                hc->chan[ch].slot_rx = -1;
+                hc->chan[ch].bank_rx = 0;
+        } else {
+                /* set pcm slot */
+                if (hc->chan[ch].txpending)
+                        flow_rx = 0x80; /* ST->FIFO */
+                else
+                        flow_rx = 0xc0; /* ST->(FIFO,PCM) */
+                /* put on slot */
+                routing = bank_rx?0x80:0xc0; /* reversed */
+                if (conf >= 0 || bank_rx > 1)
+                        routing = 0x40; /* loop */
+                if (debug & DEBUG_HFCMULTI_MODE)
+                        printk(KERN_DEBUG "%s: put channel %d to slot %d bank"
+                            " %d flow %02x routing %02x conf %d (RX)\n",
+                            __func__, ch, slot_rx, bank_rx,
+                            flow_rx, routing, conf);
+                HFC_outb(hc, R_SLOT, (slot_rx<<1) | V_SL_DIR);
+                HFC_outb(hc, A_SL_CFG, (ch<<1) | V_CH_DIR | routing);
+                hc->slot_owner[(slot_rx<<1)|1] = ch;
+                hc->chan[ch].slot_rx = slot_rx;
+                hc->chan[ch].bank_rx = bank_rx;
+        }
+
+        switch (protocol) {
+        case (ISDN_P_NONE):
+                /* disable TX fifo */
+                HFC_outb(hc, R_FIFO, ch << 1);
+                HFC_wait(hc);
+                HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 | V_IFF);
+                HFC_outb(hc, A_SUBCH_CFG, 0);
+                HFC_outb(hc, A_IRQ_MSK, 0);
+                HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+                HFC_wait(hc);
+                /* disable RX fifo */
+                HFC_outb(hc, R_FIFO, (ch<<1)|1);
+                HFC_wait(hc);
+                HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00);
+                HFC_outb(hc, A_SUBCH_CFG, 0);
+                HFC_outb(hc, A_IRQ_MSK, 0);
+                HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+                HFC_wait(hc);
+                if (hc->chan[ch].bch && hc->type != 1) {
+                        hc->hw.a_st_ctrl0[hc->chan[ch].port] &=
+                            ((ch & 0x3) == 0)? ~V_B1_EN: ~V_B2_EN;
+                        HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
+                        /* undocumented: delay after R_ST_SEL */
+                        udelay(1);
+                        HFC_outb(hc, A_ST_CTRL0,
+                            hc->hw.a_st_ctrl0[hc->chan[ch].port]);
+                }
+                if (hc->chan[ch].bch) {
+                        test_and_clear_bit(FLG_HDLC, &hc->chan[ch].bch->Flags);
+                        test_and_clear_bit(FLG_TRANSPARENT,
+                            &hc->chan[ch].bch->Flags);
+                }
+                break;
+        case (ISDN_P_B_RAW): /* B-channel */
+
+                if (test_bit(HFC_CHIP_B410P, &hc->chip) &&
+                    (hc->chan[ch].slot_rx < 0) &&
+                    (hc->chan[ch].slot_tx < 0)) {
+
+                        printk(KERN_DEBUG
+                            "Setting B-channel %d to echo cancelable "
+                            "state on PCM slot %d\n", ch,
+                            ((ch / 4) * 8) + ((ch % 4) * 4) + 1);
+                        printk(KERN_DEBUG
+                            "Enabling pass through for channel\n");
+                        vpm_out(hc, ch, ((ch / 4) * 8) +
+                            ((ch % 4) * 4) + 1, 0x01);
+                        /* rx path */
+                        /* S/T -> PCM */
+                        HFC_outb(hc, R_FIFO, (ch << 1));
+                        HFC_wait(hc);
+                        HFC_outb(hc, A_CON_HDLC, 0xc0 | V_HDLC_TRP | V_IFF);
+                        HFC_outb(hc, R_SLOT, (((ch / 4) * 8) +
+                            ((ch % 4) * 4) + 1) << 1);
+                        HFC_outb(hc, A_SL_CFG, 0x80 | (ch << 1));
+
+                        /* PCM -> FIFO */
+                        HFC_outb(hc, R_FIFO, 0x20 | (ch << 1) | 1);
+                        HFC_wait(hc);
+                        HFC_outb(hc, A_CON_HDLC, 0x20 | V_HDLC_TRP | V_IFF);
+                        HFC_outb(hc, A_SUBCH_CFG, 0);
+                        HFC_outb(hc, A_IRQ_MSK, 0);
+                        HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+                        HFC_wait(hc);
+                        HFC_outb(hc, R_SLOT, ((((ch / 4) * 8) +
+                            ((ch % 4) * 4) + 1) << 1) | 1);
+                        HFC_outb(hc, A_SL_CFG, 0x80 | 0x20 | (ch << 1) | 1);
+
+                        /* tx path */
+                        /* PCM -> S/T */
+                        HFC_outb(hc, R_FIFO, (ch << 1) | 1);
+                        HFC_wait(hc);
+                        HFC_outb(hc, A_CON_HDLC, 0xc0 | V_HDLC_TRP | V_IFF);
+                        HFC_outb(hc, R_SLOT, ((((ch / 4) * 8) +
+                            ((ch % 4) * 4)) << 1) | 1);
+                        HFC_outb(hc, A_SL_CFG, 0x80 | 0x40 | (ch << 1) | 1);
+
+                        /* FIFO -> PCM */
+                        HFC_outb(hc, R_FIFO, 0x20 | (ch << 1));
+                        HFC_wait(hc);
+                        HFC_outb(hc, A_CON_HDLC, 0x20 | V_HDLC_TRP | V_IFF);
+                        HFC_outb(hc, A_SUBCH_CFG, 0);
+                        HFC_outb(hc, A_IRQ_MSK, 0);
+                        HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+                        HFC_wait(hc);
+                        /* tx silence */
+                        HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, silence);
+                        HFC_outb(hc, R_SLOT, (((ch / 4) * 8) +
+                            ((ch % 4) * 4)) << 1);
+                        HFC_outb(hc, A_SL_CFG, 0x80 | 0x20 | (ch << 1));
+                } else {
+                        /* enable TX fifo */
+                        HFC_outb(hc, R_FIFO, ch << 1);
+                        HFC_wait(hc);
+                        HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 |
+                            V_HDLC_TRP | V_IFF);
+                        HFC_outb(hc, A_SUBCH_CFG, 0);
+                        HFC_outb(hc, A_IRQ_MSK, 0);
+                        HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+                        HFC_wait(hc);
+                        /* tx silence */
+                        HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, silence);
+                        /* enable RX fifo */
+                        HFC_outb(hc, R_FIFO, (ch<<1)|1);
+                        HFC_wait(hc);
+                        HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00 | V_HDLC_TRP);
+                        HFC_outb(hc, A_SUBCH_CFG, 0);
+                        HFC_outb(hc, A_IRQ_MSK, 0);
+                        HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+                        HFC_wait(hc);
+                }
+                if (hc->type != 1) {
+                        hc->hw.a_st_ctrl0[hc->chan[ch].port] |=
+                            ((ch & 0x3) == 0) ? V_B1_EN : V_B2_EN;
+                        HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
+                        /* undocumented: delay after R_ST_SEL */
+                        udelay(1);
+                        HFC_outb(hc, A_ST_CTRL0,
+                            hc->hw.a_st_ctrl0[hc->chan[ch].port]);
+                }
+                if (hc->chan[ch].bch)
+                        test_and_set_bit(FLG_TRANSPARENT,
+                            &hc->chan[ch].bch->Flags);
+                break;
+        case (ISDN_P_B_HDLC): /* B-channel */
+        case (ISDN_P_TE_S0): /* D-channel */
+        case (ISDN_P_NT_S0):
+        case (ISDN_P_TE_E1):
+        case (ISDN_P_NT_E1):
+                /* enable TX fifo */
+                HFC_outb(hc, R_FIFO, ch<<1);
+                HFC_wait(hc);
+                if (hc->type == 1 || hc->chan[ch].bch) {
+                        /* E1 or B-channel */
+                        HFC_outb(hc, A_CON_HDLC, flow_tx | 0x04);
+                        HFC_outb(hc, A_SUBCH_CFG, 0);
+                } else {
+                        /* D-Channel without HDLC fill flags */
+                        HFC_outb(hc, A_CON_HDLC, flow_tx | 0x04 | V_IFF);
+                        HFC_outb(hc, A_SUBCH_CFG, 2);
+                }
+                HFC_outb(hc, A_IRQ_MSK, V_IRQ);
+                HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+                HFC_wait(hc);
+                /* enable RX fifo */
+                HFC_outb(hc, R_FIFO, (ch<<1)|1);
+                HFC_wait(hc);
+                HFC_outb(hc, A_CON_HDLC, flow_rx | 0x04);
+                if (hc->type == 1 || hc->chan[ch].bch)
+                        HFC_outb(hc, A_SUBCH_CFG, 0); /* full 8 bits */
+                else
+                        HFC_outb(hc, A_SUBCH_CFG, 2); /* 2 bits dchannel */
+                HFC_outb(hc, A_IRQ_MSK, V_IRQ);
+                HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+                HFC_wait(hc);
+                if (hc->chan[ch].bch) {
+                        test_and_set_bit(FLG_HDLC, &hc->chan[ch].bch->Flags);
+                        if (hc->type != 1) {
+                                hc->hw.a_st_ctrl0[hc->chan[ch].port] |=
+                                  ((ch&0x3) == 0) ? V_B1_EN : V_B2_EN;
+                                HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
+                                /* undocumented: delay after R_ST_SEL */
+                                udelay(1);
+                                HFC_outb(hc, A_ST_CTRL0,
+                                  hc->hw.a_st_ctrl0[hc->chan[ch].port]);
+                        }
+                }
+                break;
+        default:
+                printk(KERN_DEBUG "%s: protocol not known %x\n",
+                    __func__, protocol);
+                hc->chan[ch].protocol = ISDN_P_NONE;
+                return -ENOPROTOOPT;
+        }
+        hc->chan[ch].protocol = protocol;
+        return 0;
+}
+
+
+/*
+ * connect/disconnect PCM
+ */
+
+static void
+hfcmulti_pcm(struct hfc_multi *hc, int ch, int slot_tx, int bank_tx,
+    int slot_rx, int bank_rx)
+{
+        if (slot_rx < 0 || slot_rx < 0 || bank_tx < 0 || bank_rx < 0) {
+                /* disable PCM */
+                mode_hfcmulti(hc, ch, hc->chan[ch].protocol, -1, 0, -1, 0);
+                return;
+        }
+
+        /* enable pcm */
+        mode_hfcmulti(hc, ch, hc->chan[ch].protocol, slot_tx, bank_tx,
+                slot_rx, bank_rx);
+}
+
+/*
+ * set/disable conference
+ */
+
+static void
+hfcmulti_conf(struct hfc_multi *hc, int ch, int num)
+{
+        if (num >= 0 && num <= 7)
+                hc->chan[ch].conf = num;
+        else
+                hc->chan[ch].conf = -1;
+        mode_hfcmulti(hc, ch, hc->chan[ch].protocol, hc->chan[ch].slot_tx,
+            hc->chan[ch].bank_tx, hc->chan[ch].slot_rx,
+            hc->chan[ch].bank_rx);
+}
+
+
+/*
+ * set/disable sample loop
+ */
+
+/* NOTE: this function is experimental and therefore disabled */
+
+/*
+ * Layer 1 callback function
+ */
+static int
+hfcm_l1callback(struct dchannel *dch, u_int cmd)
+{
+        struct hfc_multi        *hc = dch->hw;
+        u_long  flags;
+
+        switch (cmd) {
+        case INFO3_P8:
+        case INFO3_P10:
+                break;
+        case HW_RESET_REQ:
+                /* start activation */
+                spin_lock_irqsave(&hc->lock, flags);
+                if (hc->type == 1) {
+                        if (debug & DEBUG_HFCMULTI_MSG)
+                                printk(KERN_DEBUG
+                                    "%s: HW_RESET_REQ no BRI\n",
+                                    __func__);
+                } else {
+                        HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port);
+                        /* undocumented: delay after R_ST_SEL */
+                        udelay(1);
+                        HFC_outb(hc, A_ST_WR_STATE, V_ST_LD_STA | 3); /* F3 */
+                        udelay(6); /* wait at least 5,21us */
+                        HFC_outb(hc, A_ST_WR_STATE, 3);
+                        HFC_outb(hc, A_ST_WR_STATE, 3 | (V_ST_ACT*3));
+                                /* activate */
+                }
+                spin_unlock_irqrestore(&hc->lock, flags);
+                l1_event(dch->l1, HW_POWERUP_IND);
+                break;
+        case HW_DEACT_REQ:
+                /* start deactivation */
+                spin_lock_irqsave(&hc->lock, flags);
+                if (hc->type == 1) {
+                        if (debug & DEBUG_HFCMULTI_MSG)
+                                printk(KERN_DEBUG
+                                    "%s: HW_DEACT_REQ no BRI\n",
+                                    __func__);
+                } else {
+                        HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port);
+                        /* undocumented: delay after R_ST_SEL */
+                        udelay(1);
+                        HFC_outb(hc, A_ST_WR_STATE, V_ST_ACT*2);
+                                /* deactivate */
+                        if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+                                hc->syncronized &=
+                                   ~(1 << hc->chan[dch->slot].port);
+                                plxsd_checksync(hc, 0);
+                        }
+                }
+                skb_queue_purge(&dch->squeue);
+                if (dch->tx_skb) {
+                        dev_kfree_skb(dch->tx_skb);
+                        dch->tx_skb = NULL;
+                }
+                dch->tx_idx = 0;
+                if (dch->rx_skb) {
+                        dev_kfree_skb(dch->rx_skb);
+                        dch->rx_skb = NULL;
+                }
+                test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
+                if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags))
+                        del_timer(&dch->timer);
+                spin_unlock_irqrestore(&hc->lock, flags);
+                break;
+        case HW_POWERUP_REQ:
+                spin_lock_irqsave(&hc->lock, flags);
+                if (hc->type == 1) {
+                        if (debug & DEBUG_HFCMULTI_MSG)
+                                printk(KERN_DEBUG
+                                    "%s: HW_POWERUP_REQ no BRI\n",
+                                    __func__);
+                } else {
+                        HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port);
+                        /* undocumented: delay after R_ST_SEL */
+                        udelay(1);
+                        HFC_outb(hc, A_ST_WR_STATE, 3 | 0x10); /* activate */
+                        udelay(6); /* wait at least 5,21us */
+                        HFC_outb(hc, A_ST_WR_STATE, 3); /* activate */
+                }
+                spin_unlock_irqrestore(&hc->lock, flags);
+                break;
+        case PH_ACTIVATE_IND:
+                test_and_set_bit(FLG_ACTIVE, &dch->Flags);
+                _queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
+                        GFP_ATOMIC);
+                break;
+        case PH_DEACTIVATE_IND:
+                test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
+                _queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
+                        GFP_ATOMIC);
+                break;
+        default:
+                if (dch->debug & DEBUG_HW)
+                        printk(KERN_DEBUG "%s: unknown command %x\n",
+                            __func__, cmd);
+                return -1;
+        }
+        return 0;
+}
+
+/*
+ * Layer2 -> Layer 1 Transfer
+ */
+
+static int
+handle_dmsg(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+        struct mISDNdevice      *dev = container_of(ch, struct mISDNdevice, D);
+        struct dchannel         *dch = container_of(dev, struct dchannel, dev);
+        struct hfc_multi        *hc = dch->hw;
+        struct mISDNhead        *hh = mISDN_HEAD_P(skb);
+        int                     ret = -EINVAL;
+        unsigned int            id;
+        u_long                  flags;
+
+        switch (hh->prim) {
+        case PH_DATA_REQ:
+                if (skb->len < 1)
+                        break;
+                spin_lock_irqsave(&hc->lock, flags);
+                ret = dchannel_senddata(dch, skb);
+                if (ret > 0) { /* direct TX */
+                        id = hh->id; /* skb can be freed */
+                        hfcmulti_tx(hc, dch->slot);
+                        ret = 0;
+                        /* start fifo */
+                        HFC_outb(hc, R_FIFO, 0);
+                        HFC_wait(hc);
+                        spin_unlock_irqrestore(&hc->lock, flags);
+                        queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
+                } else
+                        spin_unlock_irqrestore(&hc->lock, flags);
+                return ret;
+        case PH_ACTIVATE_REQ:
+                if (dch->dev.D.protocol != ISDN_P_TE_S0) {
+                        spin_lock_irqsave(&hc->lock, flags);
+                        ret = 0;
+                        if (debug & DEBUG_HFCMULTI_MSG)
+                                printk(KERN_DEBUG
+                                    "%s: PH_ACTIVATE port %d (0..%d)\n",
+                                    __func__, hc->chan[dch->slot].port,
+                                    hc->ports-1);
+                        /* start activation */
+                        if (hc->type == 1) {
+                                ph_state_change(dch);
+                                if (debug & DEBUG_HFCMULTI_STATE)
+                                        printk(KERN_DEBUG
+                                            "%s: E1 report state %x \n",
+                                            __func__, dch->state);
+                        } else {
+                                HFC_outb(hc, R_ST_SEL,
+                                    hc->chan[dch->slot].port);
+                                /* undocumented: delay after R_ST_SEL */
+                                udelay(1);
+                                HFC_outb(hc, A_ST_WR_STATE, V_ST_LD_STA | 1);
+                                    /* G1 */
+                                udelay(6); /* wait at least 5,21us */
+                                HFC_outb(hc, A_ST_WR_STATE, 1);
+                                HFC_outb(hc, A_ST_WR_STATE, 1 |
+                                    (V_ST_ACT*3)); /* activate */
+                                dch->state = 1;
+                        }
+                        spin_unlock_irqrestore(&hc->lock, flags);
+                } else
+                        ret = l1_event(dch->l1, hh->prim);
+                break;
+        case PH_DEACTIVATE_REQ:
+                test_and_clear_bit(FLG_L2_ACTIVATED, &dch->Flags);
+                if (dch->dev.D.protocol != ISDN_P_TE_S0) {
+                        spin_lock_irqsave(&hc->lock, flags);
+                        if (debug & DEBUG_HFCMULTI_MSG)
+                                printk(KERN_DEBUG
+                                    "%s: PH_DEACTIVATE port %d (0..%d)\n",
+                                    __func__, hc->chan[dch->slot].port,
+                                    hc->ports-1);
+                        /* start deactivation */
+                        if (hc->type == 1) {
+                                if (debug & DEBUG_HFCMULTI_MSG)
+                                        printk(KERN_DEBUG
+                                            "%s: PH_DEACTIVATE no BRI\n",
+                                            __func__);
+                        } else {
+                                HFC_outb(hc, R_ST_SEL,
+                                    hc->chan[dch->slot].port);
+                                /* undocumented: delay after R_ST_SEL */
+                                udelay(1);
+                                HFC_outb(hc, A_ST_WR_STATE, V_ST_ACT * 2);
+                                    /* deactivate */
+                                dch->state = 1;
+                        }
+                        skb_queue_purge(&dch->squeue);
+                        if (dch->tx_skb) {
+                                dev_kfree_skb(dch->tx_skb);
+                                dch->tx_skb = NULL;
+                        }
+                        dch->tx_idx = 0;
+                        if (dch->rx_skb) {
+                                dev_kfree_skb(dch->rx_skb);
+                                dch->rx_skb = NULL;
+                        }
+                        test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
+                        if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags))
+                                del_timer(&dch->timer);
+#ifdef FIXME
+                        if (test_and_clear_bit(FLG_L1_BUSY, &dch->Flags))
+                                dchannel_sched_event(&hc->dch, D_CLEARBUSY);
+#endif
+                        ret = 0;
+                        spin_unlock_irqrestore(&hc->lock, flags);
+                } else
+                        ret = l1_event(dch->l1, hh->prim);
+                break;
+        }
+        if (!ret)
+                dev_kfree_skb(skb);
+        return ret;
+}
+
+static void
+deactivate_bchannel(struct bchannel *bch)
+{
+        struct hfc_multi        *hc = bch->hw;
+        u_long                  flags;
+
+        spin_lock_irqsave(&hc->lock, flags);
+        if (test_and_clear_bit(FLG_TX_NEXT, &bch->Flags)) {
+                dev_kfree_skb(bch->next_skb);
+                bch->next_skb = NULL;
+        }
+        if (bch->tx_skb) {
+                dev_kfree_skb(bch->tx_skb);
+                bch->tx_skb = NULL;
+        }
+        bch->tx_idx = 0;
+        if (bch->rx_skb) {
+                dev_kfree_skb(bch->rx_skb);
+                bch->rx_skb = NULL;
+        }
+        hc->chan[bch->slot].coeff_count = 0;
+        test_and_clear_bit(FLG_ACTIVE, &bch->Flags);
+        test_and_clear_bit(FLG_TX_BUSY, &bch->Flags);
+        hc->chan[bch->slot].rx_off = 0;
+        hc->chan[bch->slot].conf = -1;
+        mode_hfcmulti(hc, bch->slot, ISDN_P_NONE, -1, 0, -1, 0);
+        spin_unlock_irqrestore(&hc->lock, flags);
+}
+
+static int
+handle_bmsg(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+        struct bchannel         *bch = container_of(ch, struct bchannel, ch);
+        struct hfc_multi        *hc = bch->hw;
+        int                     ret = -EINVAL;
+        struct mISDNhead        *hh = mISDN_HEAD_P(skb);
+        unsigned int            id;
+        u_long                  flags;
+
+        switch (hh->prim) {
+        case PH_DATA_REQ:
+                if (!skb->len)
+                        break;
+                spin_lock_irqsave(&hc->lock, flags);
+                ret = bchannel_senddata(bch, skb);
+                if (ret > 0) { /* direct TX */
+                        id = hh->id; /* skb can be freed */
+                        hfcmulti_tx(hc, bch->slot);
+                        ret = 0;
+                        /* start fifo */
+                        HFC_outb_nodebug(hc, R_FIFO, 0);
+                        HFC_wait_nodebug(hc);
+                        if (!test_bit(FLG_TRANSPARENT, &bch->Flags)) {
+                                spin_unlock_irqrestore(&hc->lock, flags);
+                                queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
+                        } else
+                                spin_unlock_irqrestore(&hc->lock, flags);
+                } else
+                        spin_unlock_irqrestore(&hc->lock, flags);
+                return ret;
+        case PH_ACTIVATE_REQ:
+                if (debug & DEBUG_HFCMULTI_MSG)
+                        printk(KERN_DEBUG "%s: PH_ACTIVATE ch %d (0..32)\n",
+                                __func__, bch->slot);
+                spin_lock_irqsave(&hc->lock, flags);
+                /* activate B-channel if not already activated */
+                if (!test_and_set_bit(FLG_ACTIVE, &bch->Flags)) {
+                        hc->chan[bch->slot].txpending = 0;
+                        ret = mode_hfcmulti(hc, bch->slot,
+                                ch->protocol,
+                                hc->chan[bch->slot].slot_tx,
+                                hc->chan[bch->slot].bank_tx,
+                                hc->chan[bch->slot].slot_rx,
+                                hc->chan[bch->slot].bank_rx);
+                        if (!ret) {
+                                if (ch->protocol == ISDN_P_B_RAW && !hc->dtmf
+                                        && test_bit(HFC_CHIP_DTMF, &hc->chip)) {
+                                        /* start decoder */
+                                        hc->dtmf = 1;
+                                        if (debug & DEBUG_HFCMULTI_DTMF)
+                                                printk(KERN_DEBUG
+                                                    "%s: start dtmf decoder\n",
+                                                        __func__);
+                                        HFC_outb(hc, R_DTMF, hc->hw.r_dtmf |
+                                            V_RST_DTMF);
+                                }
+                        }
+                } else
+                        ret = 0;
+                spin_unlock_irqrestore(&hc->lock, flags);
+                if (!ret)
+                        _queue_data(ch, PH_ACTIVATE_IND, MISDN_ID_ANY, 0, NULL,
+                                GFP_KERNEL);
+                break;
+        case PH_CONTROL_REQ:
+                spin_lock_irqsave(&hc->lock, flags);
+                switch (hh->id) {
+                case HFC_SPL_LOOP_ON: /* set sample loop */
+                        if (debug & DEBUG_HFCMULTI_MSG)
+                        printk(KERN_DEBUG
+                            "%s: HFC_SPL_LOOP_ON (len = %d)\n",
+                            __func__, skb->len);
+                        ret = 0;
+                        break;
+                case HFC_SPL_LOOP_OFF: /* set silence */
+                        if (debug & DEBUG_HFCMULTI_MSG)
+                                printk(KERN_DEBUG "%s: HFC_SPL_LOOP_OFF\n",
+                                    __func__);
+                        ret = 0;
+                        break;
+                default:
+                        printk(KERN_ERR
+                             "%s: unknown PH_CONTROL_REQ info %x\n",
+                             __func__, hh->id);
+                        ret = -EINVAL;
+                }
+                spin_unlock_irqrestore(&hc->lock, flags);
+                break;
+        case PH_DEACTIVATE_REQ:
+                deactivate_bchannel(bch); /* locked there */
+                _queue_data(ch, PH_DEACTIVATE_IND, MISDN_ID_ANY, 0, NULL,
+                        GFP_KERNEL);
+                ret = 0;
+                break;
+        }
+        if (!ret)
+                dev_kfree_skb(skb);
+        return ret;
+}
+
+/*
+ * bchannel control function
+ */
+static int
+channel_bctrl(struct bchannel *bch, struct mISDN_ctrl_req *cq)
+{
+        int                     ret = 0;
+        struct dsp_features     *features =
+                (struct dsp_features *)(*((u_long *)&cq->p1));
+        struct hfc_multi        *hc = bch->hw;
+        int                     slot_tx;
+        int                     bank_tx;
+        int                     slot_rx;
+        int                     bank_rx;
+        int                     num;
+
+        switch (cq->op) {
+        case MISDN_CTRL_GETOP:
+                cq->op = MISDN_CTRL_HFC_OP | MISDN_CTRL_HW_FEATURES_OP
+                        | MISDN_CTRL_RX_OFF;
+                break;
+        case MISDN_CTRL_RX_OFF: /* turn off / on rx stream */
+                hc->chan[bch->slot].rx_off = !!cq->p1;
+                if (!hc->chan[bch->slot].rx_off) {
+                        /* reset fifo on rx on */
+                        HFC_outb_nodebug(hc, R_FIFO, (bch->slot << 1) | 1);
+                        HFC_wait_nodebug(hc);
+                        HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F);
+                        HFC_wait_nodebug(hc);
+                }
+                if (debug & DEBUG_HFCMULTI_MSG)
+                        printk(KERN_DEBUG "%s: RX_OFF request (nr=%d off=%d)\n",
+                            __func__, bch->nr, hc->chan[bch->slot].rx_off);
+                break;
+        case MISDN_CTRL_HW_FEATURES: /* fill features structure */
+                if (debug & DEBUG_HFCMULTI_MSG)
+                        printk(KERN_DEBUG "%s: HW_FEATURE request\n",
+                            __func__);
+                /* create confirm */
+                features->hfc_id = hc->id;
+                if (test_bit(HFC_CHIP_DTMF, &hc->chip))
+                        features->hfc_dtmf = 1;
+                features->hfc_loops = 0;
+                if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
+                        features->hfc_echocanhw = 1;
+                } else {
+                        features->pcm_id = hc->pcm;
+                        features->pcm_slots = hc->slots;
+                        features->pcm_banks = 2;
+                }
+                break;
+        case MISDN_CTRL_HFC_PCM_CONN: /* connect to pcm timeslot (0..N) */
+                slot_tx = cq->p1 & 0xff;
+                bank_tx = cq->p1 >> 8;
+                slot_rx = cq->p2 & 0xff;
+                bank_rx = cq->p2 >> 8;
+                if (debug & DEBUG_HFCMULTI_MSG)
+                        printk(KERN_DEBUG
+                            "%s: HFC_PCM_CONN slot %d bank %d (TX) "
+                            "slot %d bank %d (RX)\n",
+                            __func__, slot_tx, bank_tx,
+                            slot_rx, bank_rx);
+                if (slot_tx < hc->slots && bank_tx <= 2 &&
+                    slot_rx < hc->slots && bank_rx <= 2)
+                        hfcmulti_pcm(hc, bch->slot,
+                            slot_tx, bank_tx, slot_rx, bank_rx);
+                else {
+                        printk(KERN_WARNING
+                            "%s: HFC_PCM_CONN slot %d bank %d (TX) "
+                            "slot %d bank %d (RX) out of range\n",
+                            __func__, slot_tx, bank_tx,
+                            slot_rx, bank_rx);
+                        ret = -EINVAL;
+                }
+                break;
+        case MISDN_CTRL_HFC_PCM_DISC: /* release interface from pcm timeslot */
+                if (debug & DEBUG_HFCMULTI_MSG)
+                        printk(KERN_DEBUG "%s: HFC_PCM_DISC\n",
+                            __func__);
+                hfcmulti_pcm(hc, bch->slot, -1, 0, -1, 0);
+                break;
+        case MISDN_CTRL_HFC_CONF_JOIN: /* join conference (0..7) */
+                num = cq->p1 & 0xff;
+                if (debug & DEBUG_HFCMULTI_MSG)
+                        printk(KERN_DEBUG "%s: HFC_CONF_JOIN conf %d\n",
+                            __func__, num);
+                if (num <= 7)
+                        hfcmulti_conf(hc, bch->slot, num);
+                else {
+                        printk(KERN_WARNING
+                            "%s: HW_CONF_JOIN conf %d out of range\n",
+                            __func__, num);
+                        ret = -EINVAL;
+                }
+                break;
+        case MISDN_CTRL_HFC_CONF_SPLIT: /* split conference */
+                if (debug & DEBUG_HFCMULTI_MSG)
+                        printk(KERN_DEBUG "%s: HFC_CONF_SPLIT\n", __func__);
+                hfcmulti_conf(hc, bch->slot, -1);
+                break;
+        case MISDN_CTRL_HFC_ECHOCAN_ON:
+                if (debug & DEBUG_HFCMULTI_MSG)
+                        printk(KERN_DEBUG "%s: HFC_ECHOCAN_ON\n", __func__);
+                if (test_bit(HFC_CHIP_B410P, &hc->chip))
+                        vpm_echocan_on(hc, bch->slot, cq->p1);
+                else
+                        ret = -EINVAL;
+                break;
+
+        case MISDN_CTRL_HFC_ECHOCAN_OFF:
+                if (debug & DEBUG_HFCMULTI_MSG)
+                        printk(KERN_DEBUG "%s: HFC_ECHOCAN_OFF\n",
+                                __func__);
+                if (test_bit(HFC_CHIP_B410P, &hc->chip))
+                        vpm_echocan_off(hc, bch->slot);
+                else
+                        ret = -EINVAL;
+                break;
+        default:
+                printk(KERN_WARNING "%s: unknown Op %x\n",
+                    __func__, cq->op);
+                ret = -EINVAL;
+                break;
+        }
+        return ret;
+}
+
+static int
+hfcm_bctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+        struct bchannel         *bch = container_of(ch, struct bchannel, ch);
+        struct hfc_multi        *hc = bch->hw;
+        int                     err = -EINVAL;
+        u_long  flags;
+
+        if (bch->debug & DEBUG_HW)
+                printk(KERN_DEBUG "%s: cmd:%x %p\n",
+                    __func__, cmd, arg);
+        switch (cmd) {
+        case CLOSE_CHANNEL:
+                test_and_clear_bit(FLG_OPEN, &bch->Flags);
+                if (test_bit(FLG_ACTIVE, &bch->Flags))
+                        deactivate_bchannel(bch); /* locked there */
+                ch->protocol = ISDN_P_NONE;
+                ch->peer = NULL;
+                module_put(THIS_MODULE);
+                err = 0;
+                break;
+        case CONTROL_CHANNEL:
+                spin_lock_irqsave(&hc->lock, flags);
+                err = channel_bctrl(bch, arg);
+                spin_unlock_irqrestore(&hc->lock, flags);
+                break;
+        default:
+                printk(KERN_WARNING "%s: unknown prim(%x)\n",
+                        __func__, cmd);
+        }
+        return err;
+}
+
+/*
+ * handle D-channel events
+ *
+ * handle state change event
+ */
+static void
+ph_state_change(struct dchannel *dch)
+{
+        struct hfc_multi *hc = dch->hw;
+        int ch, i;
+
+        if (!dch) {
+                printk(KERN_WARNING "%s: ERROR given dch is NULL\n",
+                    __func__);
+                return;
+        }
+        ch = dch->slot;
+
+        if (hc->type == 1) {
+                if (dch->dev.D.protocol == ISDN_P_TE_E1) {
+                        if (debug & DEBUG_HFCMULTI_STATE)
+                                printk(KERN_DEBUG
+                                    "%s: E1 TE (id=%d) newstate %x\n",
+                                    __func__, hc->id, dch->state);
+                } else {
+                        if (debug & DEBUG_HFCMULTI_STATE)
+                                printk(KERN_DEBUG
+                                    "%s: E1 NT (id=%d) newstate %x\n",
+                                    __func__, hc->id, dch->state);
+                }
+                switch (dch->state) {
+                case (1):
+                        if (hc->e1_state != 1) {
+                            for (i = 1; i <= 31; i++) {
+                                /* reset fifos on e1 activation */
+                                HFC_outb_nodebug(hc, R_FIFO, (i << 1) | 1);
+                                HFC_wait_nodebug(hc);
+                                HFC_outb_nodebug(hc,
+                                        R_INC_RES_FIFO, V_RES_F);
+                                HFC_wait_nodebug(hc);
+                            }
+                        }
+                        test_and_set_bit(FLG_ACTIVE, &dch->Flags);
+                        _queue_data(&dch->dev.D, PH_ACTIVATE_IND,
+                            MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
+                        break;
+
+                default:
+                        if (hc->e1_state != 1)
+                                return;
+                        test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
+                        _queue_data(&dch->dev.D, PH_DEACTIVATE_IND,
+                            MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
+                }
+                hc->e1_state = dch->state;
+        } else {
+                if (dch->dev.D.protocol == ISDN_P_TE_S0) {
+                        if (debug & DEBUG_HFCMULTI_STATE)
+                                printk(KERN_DEBUG
+                                    "%s: S/T TE newstate %x\n",
+                                    __func__, dch->state);
+                        switch (dch->state) {
+                        case (0):
+                                l1_event(dch->l1, HW_RESET_IND);
+                                break;
+                        case (3):
+                                l1_event(dch->l1, HW_DEACT_IND);
+                                break;
+                        case (5):
+                        case (8):
+                                l1_event(dch->l1, ANYSIGNAL);
+                                break;
+                        case (6):
+                                l1_event(dch->l1, INFO2);
+                                break;
+                        case (7):
+                                l1_event(dch->l1, INFO4_P8);
+                                break;
+                        }
+                } else {
+                        if (debug & DEBUG_HFCMULTI_STATE)
+                                printk(KERN_DEBUG "%s: S/T NT newstate %x\n",
+                                    __func__, dch->state);
+                        switch (dch->state) {
+                        case (2):
+                                if (hc->chan[ch].nt_timer == 0) {
+                                        hc->chan[ch].nt_timer = -1;
+                                        HFC_outb(hc, R_ST_SEL,
+                                            hc->chan[ch].port);
+                                        /* undocumented: delay after R_ST_SEL */
+                                        udelay(1);
+                                        HFC_outb(hc, A_ST_WR_STATE, 4 |
+                                            V_ST_LD_STA); /* G4 */
+                                        udelay(6); /* wait at least 5,21us */
+                                        HFC_outb(hc, A_ST_WR_STATE, 4);
+                                        dch->state = 4;
+                                } else {
+                                        /* one extra count for the next event */
+                                        hc->chan[ch].nt_timer =
+                                            nt_t1_count[poll_timer] + 1;
+                                        HFC_outb(hc, R_ST_SEL,
+                                            hc->chan[ch].port);
+                                        /* undocumented: delay after R_ST_SEL */
+                                        udelay(1);
+                                        /* allow G2 -> G3 transition */
+                                        HFC_outb(hc, A_ST_WR_STATE, 2 |
+                                            V_SET_G2_G3);
+                                }
+                                break;
+                        case (1):
+                                hc->chan[ch].nt_timer = -1;
+                                test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
+                                _queue_data(&dch->dev.D, PH_DEACTIVATE_IND,
+                                    MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
+                                break;
+                        case (4):
+                                hc->chan[ch].nt_timer = -1;
+                                break;
+                        case (3):
+                                hc->chan[ch].nt_timer = -1;
+                                test_and_set_bit(FLG_ACTIVE, &dch->Flags);
+                                _queue_data(&dch->dev.D, PH_ACTIVATE_IND,
+                                    MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
+                                break;
+                        }
+                }
+        }
+}
+
+/*
+ * called for card mode init message
+ */
+
+static void
+hfcmulti_initmode(struct dchannel *dch)
+{
+        struct hfc_multi *hc = dch->hw;
+        u_char          a_st_wr_state, r_e1_wr_sta;
+        int             i, pt;
+
+        if (debug & DEBUG_HFCMULTI_INIT)
+                printk(KERN_DEBUG "%s: entered\n", __func__);
+
+        if (hc->type == 1) {
+                hc->chan[hc->dslot].slot_tx = -1;
+                hc->chan[hc->dslot].slot_rx = -1;
+                hc->chan[hc->dslot].conf = -1;
+                if (hc->dslot) {
+                        mode_hfcmulti(hc, hc->dslot, dch->dev.D.protocol,
+                                -1, 0, -1, 0);
+                        dch->timer.function = (void *) hfcmulti_dbusy_timer;
+                        dch->timer.data = (long) dch;
+                        init_timer(&dch->timer);
+                }
+                for (i = 1; i <= 31; i++) {
+                        if (i == hc->dslot)
+                                continue;
+                        hc->chan[i].slot_tx = -1;
+                        hc->chan[i].slot_rx = -1;
+                        hc->chan[i].conf = -1;
+                        mode_hfcmulti(hc, i, ISDN_P_NONE, -1, 0, -1, 0);
+                }
+                /* E1 */
+                if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) {
+                        HFC_outb(hc, R_LOS0, 255); /* 2 ms */
+                        HFC_outb(hc, R_LOS1, 255); /* 512 ms */
+                }
+                if (test_bit(HFC_CFG_OPTICAL, &hc->chan[hc->dslot].cfg)) {
+                        HFC_outb(hc, R_RX0, 0);
+                        hc->hw.r_tx0 = 0 | V_OUT_EN;
+                } else {
+                        HFC_outb(hc, R_RX0, 1);
+                        hc->hw.r_tx0 = 1 | V_OUT_EN;
+                }
+                hc->hw.r_tx1 = V_ATX | V_NTRI;
+                HFC_outb(hc, R_TX0, hc->hw.r_tx0);
+                HFC_outb(hc, R_TX1, hc->hw.r_tx1);
+                HFC_outb(hc, R_TX_FR0, 0x00);
+                HFC_outb(hc, R_TX_FR1, 0xf8);
+
+                if (test_bit(HFC_CFG_CRC4, &hc->chan[hc->dslot].cfg))
+                        HFC_outb(hc, R_TX_FR2, V_TX_MF | V_TX_E | V_NEG_E);
+
+                HFC_outb(hc, R_RX_FR0, V_AUTO_RESYNC | V_AUTO_RECO | 0);
+
+                if (test_bit(HFC_CFG_CRC4, &hc->chan[hc->dslot].cfg))
+                        HFC_outb(hc, R_RX_FR1, V_RX_MF | V_RX_MF_SYNC);
+
+                if (dch->dev.D.protocol == ISDN_P_NT_E1) {
+                        if (debug & DEBUG_HFCMULTI_INIT)
+                                printk(KERN_DEBUG "%s: E1 port is NT-mode\n",
+                                    __func__);
+                        r_e1_wr_sta = 0; /* G0 */
+                        hc->e1_getclock = 0;
+                } else {
+                        if (debug & DEBUG_HFCMULTI_INIT)
+                                printk(KERN_DEBUG "%s: E1 port is TE-mode\n",
+                                    __func__);
+                        r_e1_wr_sta = 0; /* F0 */
+                        hc->e1_getclock = 1;
+                }
+                if (test_bit(HFC_CHIP_RX_SYNC, &hc->chip))
+                        HFC_outb(hc, R_SYNC_OUT, V_SYNC_E1_RX);
+                else
+                        HFC_outb(hc, R_SYNC_OUT, 0);
+                if (test_bit(HFC_CHIP_E1CLOCK_GET, &hc->chip))
+                        hc->e1_getclock = 1;
+                if (test_bit(HFC_CHIP_E1CLOCK_PUT, &hc->chip))
+                        hc->e1_getclock = 0;
+                if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
+                        /* SLAVE (clock master) */
+                        if (debug & DEBUG_HFCMULTI_INIT)
+                                printk(KERN_DEBUG
+                                    "%s: E1 port is clock master "
+                                    "(clock from PCM)\n", __func__);
+                        HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC | V_PCM_SYNC);
+                } else {
+                        if (hc->e1_getclock) {
+                                /* MASTER (clock slave) */
+                                if (debug & DEBUG_HFCMULTI_INIT)
+                                        printk(KERN_DEBUG
+                                            "%s: E1 port is clock slave "
+                                            "(clock to PCM)\n", __func__);
+                                HFC_outb(hc, R_SYNC_CTRL, V_SYNC_OFFS);
+                        } else {
+                                /* MASTER (clock master) */
+                                if (debug & DEBUG_HFCMULTI_INIT)
+                                        printk(KERN_DEBUG "%s: E1 port is "
+                                            "clock master "
+                                            "(clock from QUARTZ)\n",
+                                            __func__);
+                                HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC |
+                                    V_PCM_SYNC | V_JATT_OFF);
+                                HFC_outb(hc, R_SYNC_OUT, 0);
+                        }
+                }
+                HFC_outb(hc, R_JATT_ATT, 0x9c); /* undoc register */
+                HFC_outb(hc, R_PWM_MD, V_PWM0_MD);
+                HFC_outb(hc, R_PWM0, 0x50);
+                HFC_outb(hc, R_PWM1, 0xff);
+                /* state machine setup */
+                HFC_outb(hc, R_E1_WR_STA, r_e1_wr_sta | V_E1_LD_STA);
+                udelay(6); /* wait at least 5,21us */
+                HFC_outb(hc, R_E1_WR_STA, r_e1_wr_sta);
+                if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+                        hc->syncronized = 0;
+                        plxsd_checksync(hc, 0);
+                }
+        } else {
+                i = dch->slot;
+                hc->chan[i].slot_tx = -1;
+                hc->chan[i].slot_rx = -1;
+                hc->chan[i].conf = -1;
+                mode_hfcmulti(hc, i, dch->dev.D.protocol, -1, 0, -1, 0);
+                dch->timer.function = (void *)hfcmulti_dbusy_timer;
+                dch->timer.data = (long) dch;
+                init_timer(&dch->timer);
+                hc->chan[i - 2].slot_tx = -1;
+                hc->chan[i - 2].slot_rx = -1;
+                hc->chan[i - 2].conf = -1;
+                mode_hfcmulti(hc, i - 2, ISDN_P_NONE, -1, 0, -1, 0);
+                hc->chan[i - 1].slot_tx = -1;
+                hc->chan[i - 1].slot_rx = -1;
+                hc->chan[i - 1].conf = -1;
+                mode_hfcmulti(hc, i - 1, ISDN_P_NONE, -1, 0, -1, 0);
+                /* ST */
+                pt = hc->chan[i].port;
+                /* select interface */
+                HFC_outb(hc, R_ST_SEL, pt);
+                /* undocumented: delay after R_ST_SEL */
+                udelay(1);
+                if (dch->dev.D.protocol == ISDN_P_NT_S0) {
+                        if (debug & DEBUG_HFCMULTI_INIT)
+                                printk(KERN_DEBUG
+                                    "%s: ST port %d is NT-mode\n",
+                                    __func__, pt);
+                        /* clock delay */
+                        HFC_outb(hc, A_ST_CLK_DLY, clockdelay_nt);
+                        a_st_wr_state = 1; /* G1 */
+                        hc->hw.a_st_ctrl0[pt] = V_ST_MD;
+                } else {
+                        if (debug & DEBUG_HFCMULTI_INIT)
+                                printk(KERN_DEBUG
+                                    "%s: ST port %d is TE-mode\n",
+                                    __func__, pt);
+                        /* clock delay */
+                        HFC_outb(hc, A_ST_CLK_DLY, clockdelay_te);
+                        a_st_wr_state = 2; /* F2 */
+                        hc->hw.a_st_ctrl0[pt] = 0;
+                }
+                if (!test_bit(HFC_CFG_NONCAP_TX, &hc->chan[i].cfg))
+                        hc->hw.a_st_ctrl0[pt] |= V_TX_LI;
+                /* line setup */
+                HFC_outb(hc, A_ST_CTRL0,  hc->hw.a_st_ctrl0[pt]);
+                /* disable E-channel */
+                if ((dch->dev.D.protocol == ISDN_P_NT_S0) ||
+                    test_bit(HFC_CFG_DIS_ECHANNEL, &hc->chan[i].cfg))
+                        HFC_outb(hc, A_ST_CTRL1, V_E_IGNO);
+                else
+                        HFC_outb(hc, A_ST_CTRL1, 0);
+                /* enable B-channel receive */
+                HFC_outb(hc, A_ST_CTRL2,  V_B1_RX_EN | V_B2_RX_EN);
+                /* state machine setup */
+                HFC_outb(hc, A_ST_WR_STATE, a_st_wr_state | V_ST_LD_STA);
+                udelay(6); /* wait at least 5,21us */
+                HFC_outb(hc, A_ST_WR_STATE, a_st_wr_state);
+                hc->hw.r_sci_msk |= 1 << pt;
+                /* state machine interrupts */
+                HFC_outb(hc, R_SCI_MSK, hc->hw.r_sci_msk);
+                /* unset sync on port */
+                if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+                        hc->syncronized &=
+                           ~(1 << hc->chan[dch->slot].port);
+                        plxsd_checksync(hc, 0);
+                }
+        }
+        if (debug & DEBUG_HFCMULTI_INIT)
+                printk("%s: done\n", __func__);
+}
+
+
+static int
+open_dchannel(struct hfc_multi *hc, struct dchannel *dch,
+    struct channel_req *rq)
+{
+        int     err = 0;
+        u_long  flags;
+
+        if (debug & DEBUG_HW_OPEN)
+                printk(KERN_DEBUG "%s: dev(%d) open from %p\n", __func__,
+                    dch->dev.id, __builtin_return_address(0));
+        if (rq->protocol == ISDN_P_NONE)
+                return -EINVAL;
+        if ((dch->dev.D.protocol != ISDN_P_NONE) &&
+            (dch->dev.D.protocol != rq->protocol)) {
+            if (debug & DEBUG_HFCMULTI_MODE)
+                printk(KERN_WARNING "%s: change protocol %x to %x\n",
+                    __func__, dch->dev.D.protocol, rq->protocol);
+        }
+        if ((dch->dev.D.protocol == ISDN_P_TE_S0)
+         && (rq->protocol != ISDN_P_TE_S0))
+                l1_event(dch->l1, CLOSE_CHANNEL);
+        if (dch->dev.D.protocol != rq->protocol) {
+                if (rq->protocol == ISDN_P_TE_S0) {
+                        err = create_l1(dch, hfcm_l1callback);
+                        if (err)
+                                return err;
+                }
+                dch->dev.D.protocol = rq->protocol;
+                spin_lock_irqsave(&hc->lock, flags);
+                hfcmulti_initmode(dch);
+                spin_unlock_irqrestore(&hc->lock, flags);
+        }
+
+        if (((rq->protocol == ISDN_P_NT_S0) && (dch->state == 3)) ||
+            ((rq->protocol == ISDN_P_TE_S0) && (dch->state == 7)) ||
+            ((rq->protocol == ISDN_P_NT_E1) && (dch->state == 1)) ||
+            ((rq->protocol == ISDN_P_TE_E1) && (dch->state == 1))) {
+                _queue_data(&dch->dev.D, PH_ACTIVATE_IND, MISDN_ID_ANY,
+                    0, NULL, GFP_KERNEL);
+        }
+        rq->ch = &dch->dev.D;
+        if (!try_module_get(THIS_MODULE))
+                printk(KERN_WARNING "%s:cannot get module\n", __func__);
+        return 0;
+}
+
+static int
+open_bchannel(struct hfc_multi *hc, struct dchannel *dch,
+    struct channel_req *rq)
+{
+        struct bchannel *bch;
+        int             ch;
+
+        if (!test_bit(rq->adr.channel, &dch->dev.channelmap[0]))
+                return -EINVAL;
+        if (rq->protocol == ISDN_P_NONE)
+                return -EINVAL;
+        if (hc->type == 1)
+                ch = rq->adr.channel;
+        else
+                ch = (rq->adr.channel - 1) + (dch->slot - 2);
+        bch = hc->chan[ch].bch;
+        if (!bch) {
+                printk(KERN_ERR "%s:internal error ch %d has no bch\n",
+                    __func__, ch);
+                return -EINVAL;
+        }
+        if (test_and_set_bit(FLG_OPEN, &bch->Flags))
+                return -EBUSY; /* b-channel can be only open once */
+        bch->ch.protocol = rq->protocol;
+        hc->chan[ch].rx_off = 0;
+        rq->ch = &bch->ch;
+        if (!try_module_get(THIS_MODULE))
+                printk(KERN_WARNING "%s:cannot get module\n", __func__);
+        return 0;
+}
+
+/*
+ * device control function
+ */
+static int
+channel_dctrl(struct dchannel *dch, struct mISDN_ctrl_req *cq)
+{
+        int     ret = 0;
+
+        switch (cq->op) {
+        case MISDN_CTRL_GETOP:
+                cq->op = 0;
+                break;
+        default:
+                printk(KERN_WARNING "%s: unknown Op %x\n",
+                    __func__, cq->op);
+                ret = -EINVAL;
+                break;
+        }
+        return ret;
+}
+
+static int
+hfcm_dctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+        struct mISDNdevice      *dev = container_of(ch, struct mISDNdevice, D);
+        struct dchannel         *dch = container_of(dev, struct dchannel, dev);
+        struct hfc_multi        *hc = dch->hw;
+        struct channel_req      *rq;
+        int                     err = 0;
+        u_long                  flags;
+
+        if (dch->debug & DEBUG_HW)
+                printk(KERN_DEBUG "%s: cmd:%x %p\n",
+                    __func__, cmd, arg);
+        switch (cmd) {
+        case OPEN_CHANNEL:
+                rq = arg;
+                switch (rq->protocol) {
+                case ISDN_P_TE_S0:
+                case ISDN_P_NT_S0:
+                        if (hc->type == 1) {
+                                err = -EINVAL;
+                                break;
+                        }
+                        err = open_dchannel(hc, dch, rq); /* locked there */
+                        break;
+                case ISDN_P_TE_E1:
+                case ISDN_P_NT_E1:
+                        if (hc->type != 1) {
+                                err = -EINVAL;
+                                break;
+                        }
+                        err = open_dchannel(hc, dch, rq); /* locked there */
+                        break;
+                default:
+                        spin_lock_irqsave(&hc->lock, flags);
+                        err = open_bchannel(hc, dch, rq);
+                        spin_unlock_irqrestore(&hc->lock, flags);
+                }
+                break;
+        case CLOSE_CHANNEL:
+                if (debug & DEBUG_HW_OPEN)
+                        printk(KERN_DEBUG "%s: dev(%d) close from %p\n",
+                            __func__, dch->dev.id,
+                            __builtin_return_address(0));
+                module_put(THIS_MODULE);
+                break;
+        case CONTROL_CHANNEL:
+                spin_lock_irqsave(&hc->lock, flags);
+                err = channel_dctrl(dch, arg);
+                spin_unlock_irqrestore(&hc->lock, flags);
+                break;
+        default:
+                if (dch->debug & DEBUG_HW)
+                        printk(KERN_DEBUG "%s: unknown command %x\n",
+                            __func__, cmd);
+                err = -EINVAL;
+        }
+        return err;
+}
+
+/*
+ * initialize the card
+ */
+
+/*
+ * start timer irq, wait some time and check if we have interrupts.
+ * if not, reset chip and try again.
+ */
+static int
+init_card(struct hfc_multi *hc)
+{
+        int     err = -EIO;
+        u_long  flags;
+        u_short *plx_acc;
+        u_long  plx_flags;
+
+        if (debug & DEBUG_HFCMULTI_INIT)
+                printk(KERN_DEBUG "%s: entered\n", __func__);
+
+        spin_lock_irqsave(&hc->lock, flags);
+        /* set interrupts but leave global interrupt disabled */
+        hc->hw.r_irq_ctrl = V_FIFO_IRQ;
+        disable_hwirq(hc);
+        spin_unlock_irqrestore(&hc->lock, flags);
+
+        if (request_irq(hc->pci_dev->irq, hfcmulti_interrupt, IRQF_SHARED,
+            "HFC-multi", hc)) {
+                printk(KERN_WARNING "mISDN: Could not get interrupt %d.\n",
+                    hc->pci_dev->irq);
+                return -EIO;
+        }
+        hc->irq = hc->pci_dev->irq;
+
+        if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+                spin_lock_irqsave(&plx_lock, plx_flags);
+                plx_acc = (u_short *)(hc->plx_membase+PLX_INTCSR);
+                writew((PLX_INTCSR_PCIINT_ENABLE | PLX_INTCSR_LINTI1_ENABLE),
+                        plx_acc); /* enable PCI & LINT1 irq */
+                spin_unlock_irqrestore(&plx_lock, plx_flags);
+        }
+
+        if (debug & DEBUG_HFCMULTI_INIT)
+                printk(KERN_DEBUG "%s: IRQ %d count %d\n",
+                    __func__, hc->irq, hc->irqcnt);
+        err = init_chip(hc);
+        if (err)
+                goto error;
+        /*
+         * Finally enable IRQ output
+         * this is only allowed, if an IRQ routine is allready
+         * established for this HFC, so don't do that earlier
+         */
+        spin_lock_irqsave(&hc->lock, flags);
+        enable_hwirq(hc);
+        spin_unlock_irqrestore(&hc->lock, flags);
+        /* printk(KERN_DEBUG "no master irq set!!!\n"); */
+        set_current_state(TASK_UNINTERRUPTIBLE);
+        schedule_timeout((100*HZ)/1000); /* Timeout 100ms */
+        /* turn IRQ off until chip is completely initialized */
+        spin_lock_irqsave(&hc->lock, flags);
+        disable_hwirq(hc);
+        spin_unlock_irqrestore(&hc->lock, flags);
+        if (debug & DEBUG_HFCMULTI_INIT)
+                printk(KERN_DEBUG "%s: IRQ %d count %d\n",
+                    __func__, hc->irq, hc->irqcnt);
+        if (hc->irqcnt) {
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_DEBUG "%s: done\n", __func__);
+
+                return 0;
+        }
+        if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
+                printk(KERN_INFO "ignoring missing interrupts\n");
+                return 0;
+        }
+
+        printk(KERN_ERR "HFC PCI: IRQ(%d) getting no interrupts during init.\n",
+                hc->irq);
+
+        err = -EIO;
+
+error:
+        if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+                spin_lock_irqsave(&plx_lock, plx_flags);
+                plx_acc = (u_short *)(hc->plx_membase+PLX_INTCSR);
+                writew(0x00, plx_acc); /*disable IRQs*/
+                spin_unlock_irqrestore(&plx_lock, plx_flags);
+        }
+
+        if (debug & DEBUG_HFCMULTI_INIT)
+                printk(KERN_WARNING "%s: free irq %d\n", __func__, hc->irq);
+        if (hc->irq) {
+                free_irq(hc->irq, hc);
+                hc->irq = 0;
+        }
+
+        if (debug & DEBUG_HFCMULTI_INIT)
+                printk(KERN_DEBUG "%s: done (err=%d)\n", __func__, err);
+        return err;
+}
+
+/*
+ * find pci device and set it up
+ */
+
+static int
+setup_pci(struct hfc_multi *hc, struct pci_dev *pdev,
+                const struct pci_device_id *ent)
+{
+        struct hm_map   *m = (struct hm_map *)ent->driver_data;
+
+        printk(KERN_INFO
+            "HFC-multi: card manufacturer: '%s' card name: '%s' clock: %s\n",
+            m->vendor_name, m->card_name, m->clock2 ? "double" : "normal");
+
+        hc->pci_dev = pdev;
+        if (m->clock2)
+                test_and_set_bit(HFC_CHIP_CLOCK2, &hc->chip);
+
+        if (ent->device == 0xB410) {
+                test_and_set_bit(HFC_CHIP_B410P, &hc->chip);
+                test_and_set_bit(HFC_CHIP_PCM_MASTER, &hc->chip);
+                test_and_clear_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
+                hc->slots = 32;
+        }
+
+        if (hc->pci_dev->irq <= 0) {
+                printk(KERN_WARNING "HFC-multi: No IRQ for PCI card found.\n");
+                return -EIO;
+        }
+        if (pci_enable_device(hc->pci_dev)) {
+                printk(KERN_WARNING "HFC-multi: Error enabling PCI card.\n");
+                return -EIO;
+        }
+        hc->leds = m->leds;
+        hc->ledstate = 0xAFFEAFFE;
+        hc->opticalsupport = m->opticalsupport;
+
+        /* set memory access methods */
+        if (m->io_mode) /* use mode from card config */
+                hc->io_mode = m->io_mode;
+        switch (hc->io_mode) {
+        case HFC_IO_MODE_PLXSD:
+                test_and_set_bit(HFC_CHIP_PLXSD, &hc->chip);
+                hc->slots = 128; /* required */
+                /* fall through */
+        case HFC_IO_MODE_PCIMEM:
+                hc->HFC_outb = HFC_outb_pcimem;
+                hc->HFC_inb = HFC_inb_pcimem;
+                hc->HFC_inw = HFC_inw_pcimem;
+                hc->HFC_wait = HFC_wait_pcimem;
+                hc->read_fifo = read_fifo_pcimem;
+                hc->write_fifo = write_fifo_pcimem;
+                break;
+        case HFC_IO_MODE_REGIO:
+                hc->HFC_outb = HFC_outb_regio;
+                hc->HFC_inb = HFC_inb_regio;
+                hc->HFC_inw = HFC_inw_regio;
+                hc->HFC_wait = HFC_wait_regio;
+                hc->read_fifo = read_fifo_regio;
+                hc->write_fifo = write_fifo_regio;
+                break;
+        default:
+                printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n");
+                pci_disable_device(hc->pci_dev);
+                return -EIO;
+        }
+        hc->HFC_outb_nodebug = hc->HFC_outb;
+        hc->HFC_inb_nodebug = hc->HFC_inb;
+        hc->HFC_inw_nodebug = hc->HFC_inw;
+        hc->HFC_wait_nodebug = hc->HFC_wait;
+#ifdef HFC_REGISTER_DEBUG
+        hc->HFC_outb = HFC_outb_debug;
+        hc->HFC_inb = HFC_inb_debug;
+        hc->HFC_inw = HFC_inw_debug;
+        hc->HFC_wait = HFC_wait_debug;
+#endif
+        hc->pci_iobase = 0;
+        hc->pci_membase = NULL;
+        hc->plx_membase = NULL;
+
+        switch (hc->io_mode) {
+        case HFC_IO_MODE_PLXSD:
+                hc->plx_origmembase =  hc->pci_dev->resource[0].start;
+                /* MEMBASE 1 is PLX PCI Bridge */
+
+                if (!hc->plx_origmembase) {
+                        printk(KERN_WARNING
+                          "HFC-multi: No IO-Memory for PCI PLX bridge found\n");
+                        pci_disable_device(hc->pci_dev);
+                        return -EIO;
+                }
+
+                hc->plx_membase = ioremap(hc->plx_origmembase, 0x80);
+                if (!hc->plx_membase) {
+                        printk(KERN_WARNING
+                            "HFC-multi: failed to remap plx address space. "
+                            "(internal error)\n");
+                        pci_disable_device(hc->pci_dev);
+                        return -EIO;
+                }
+                printk(KERN_INFO
+                    "HFC-multi: plx_membase:%#lx plx_origmembase:%#lx\n",
+                    (u_long)hc->plx_membase, hc->plx_origmembase);
+
+                hc->pci_origmembase =  hc->pci_dev->resource[2].start;
+                    /* MEMBASE 1 is PLX PCI Bridge */
+                if (!hc->pci_origmembase) {
+                        printk(KERN_WARNING
+                            "HFC-multi: No IO-Memory for PCI card found\n");
+                        pci_disable_device(hc->pci_dev);
+                        return -EIO;
+                }
+
+                hc->pci_membase = ioremap(hc->pci_origmembase, 0x400);
+                if (!hc->pci_membase) {
+                        printk(KERN_WARNING "HFC-multi: failed to remap io "
+                            "address space. (internal error)\n");
+                        pci_disable_device(hc->pci_dev);
+                        return -EIO;
+                }
+
+                printk(KERN_INFO
+                    "card %d: defined at MEMBASE %#lx (%#lx) IRQ %d HZ %d "
+                    "leds-type %d\n",
+                    hc->id, (u_long)hc->pci_membase, hc->pci_origmembase,
+                    hc->pci_dev->irq, HZ, hc->leds);
+                pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO);
+                break;
+        case HFC_IO_MODE_PCIMEM:
+                hc->pci_origmembase = hc->pci_dev->resource[1].start;
+                if (!hc->pci_origmembase) {
+                        printk(KERN_WARNING
+                            "HFC-multi: No IO-Memory for PCI card found\n");
+                        pci_disable_device(hc->pci_dev);
+                        return -EIO;
+                }
+
+                hc->pci_membase = ioremap(hc->pci_origmembase, 256);
+                if (!hc->pci_membase) {
+                        printk(KERN_WARNING
+                            "HFC-multi: failed to remap io address space. "
+                            "(internal error)\n");
+                        pci_disable_device(hc->pci_dev);
+                        return -EIO;
+                }
+                printk(KERN_INFO "card %d: defined at MEMBASE %#lx (%#lx) IRQ %d "
+                    "HZ %d leds-type %d\n", hc->id, (u_long)hc->pci_membase,
+                    hc->pci_origmembase, hc->pci_dev->irq, HZ, hc->leds);
+                pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO);
+                break;
+        case HFC_IO_MODE_REGIO:
+                hc->pci_iobase = (u_int) hc->pci_dev->resource[0].start;
+                if (!hc->pci_iobase) {
+                        printk(KERN_WARNING
+                                "HFC-multi: No IO for PCI card found\n");
+                        pci_disable_device(hc->pci_dev);
+                        return -EIO;
+                }
+
+                if (!request_region(hc->pci_iobase, 8, "hfcmulti")) {
+                        printk(KERN_WARNING "HFC-multi: failed to request "
+                            "address space at 0x%08lx (internal error)\n",
+                            hc->pci_iobase);
+                        pci_disable_device(hc->pci_dev);
+                        return -EIO;
+                }
+
+                printk(KERN_INFO
+                    "%s %s: defined at IOBASE %#x IRQ %d HZ %d leds-type %d\n",
+                    m->vendor_name, m->card_name, (u_int) hc->pci_iobase,
+                    hc->pci_dev->irq, HZ, hc->leds);
+                pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_REGIO);
+                break;
+        default:
+                printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n");
+                pci_disable_device(hc->pci_dev);
+                return -EIO;
+        }
+
+        pci_set_drvdata(hc->pci_dev, hc);
+
+        /* At this point the needed PCI config is done */
+        /* fifos are still not enabled */
+        return 0;
+}
+
+
+/*
+ * remove port
+ */
+
+static void
+release_port(struct hfc_multi *hc, struct dchannel *dch)
+{
+        int     pt, ci, i = 0;
+        u_long  flags;
+        struct bchannel *pb;
+
+        ci = dch->slot;
+        pt = hc->chan[ci].port;
+
+        if (debug & DEBUG_HFCMULTI_INIT)
+                printk(KERN_DEBUG "%s: entered for port %d\n",
+                        __func__, pt + 1);
+
+        if (pt >= hc->ports) {
+                printk(KERN_WARNING "%s: ERROR port out of range (%d).\n",
+                     __func__, pt + 1);
+                return;
+        }
+
+        if (debug & DEBUG_HFCMULTI_INIT)
+                printk(KERN_DEBUG "%s: releasing port=%d\n",
+                    __func__, pt + 1);
+
+        if (dch->dev.D.protocol == ISDN_P_TE_S0)
+                l1_event(dch->l1, CLOSE_CHANNEL);
+
+        hc->chan[ci].dch = NULL;
+
+        if (hc->created[pt]) {
+                hc->created[pt] = 0;
+                mISDN_unregister_device(&dch->dev);
+        }
+
+        spin_lock_irqsave(&hc->lock, flags);
+
+        if (dch->timer.function) {
+                del_timer(&dch->timer);
+                dch->timer.function = NULL;
+        }
+
+        if (hc->type == 1) { /* E1 */
+                /* remove sync */
+                if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+                        hc->syncronized = 0;
+                        plxsd_checksync(hc, 1);
+                }
+                /* free channels */
+                for (i = 0; i <= 31; i++) {
+                        if (hc->chan[i].bch) {
+                                if (debug & DEBUG_HFCMULTI_INIT)
+                                        printk(KERN_DEBUG
+                                            "%s: free port %d channel %d\n",
+                                            __func__, hc->chan[i].port+1, i);
+                                pb = hc->chan[i].bch;
+                                hc->chan[i].bch = NULL;
+                                spin_unlock_irqrestore(&hc->lock, flags);
+                                mISDN_freebchannel(pb);
+                                kfree(pb);
+                                kfree(hc->chan[i].coeff);
+                                spin_lock_irqsave(&hc->lock, flags);
+                        }
+                }
+        } else {
+                /* remove sync */
+                if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+                        hc->syncronized &=
+                           ~(1 << hc->chan[ci].port);
+                        plxsd_checksync(hc, 1);
+                }
+                /* free channels */
+                if (hc->chan[ci - 2].bch) {
+                        if (debug & DEBUG_HFCMULTI_INIT)
+                                printk(KERN_DEBUG
+                                    "%s: free port %d channel %d\n",
+                                    __func__, hc->chan[ci - 2].port+1,
+                                    ci - 2);
+                        pb = hc->chan[ci - 2].bch;
+                        hc->chan[ci - 2].bch = NULL;
+                        spin_unlock_irqrestore(&hc->lock, flags);
+                        mISDN_freebchannel(pb);
+                        kfree(pb);
+                        kfree(hc->chan[ci - 2].coeff);
+                        spin_lock_irqsave(&hc->lock, flags);
+                }
+                if (hc->chan[ci - 1].bch) {
+                        if (debug & DEBUG_HFCMULTI_INIT)
+                                printk(KERN_DEBUG
+                                    "%s: free port %d channel %d\n",
+                                    __func__, hc->chan[ci - 1].port+1,
+                                    ci - 1);
+                        pb = hc->chan[ci - 1].bch;
+                        hc->chan[ci - 1].bch = NULL;
+                        spin_unlock_irqrestore(&hc->lock, flags);
+                        mISDN_freebchannel(pb);
+                        kfree(pb);
+                        kfree(hc->chan[ci - 1].coeff);
+                        spin_lock_irqsave(&hc->lock, flags);
+                }
+        }
+
+        spin_unlock_irqrestore(&hc->lock, flags);
+
+        if (debug & DEBUG_HFCMULTI_INIT)
+                printk(KERN_DEBUG "%s: free port %d channel D\n", __func__, pt);
+        mISDN_freedchannel(dch);
+        kfree(dch);
+
+        if (debug & DEBUG_HFCMULTI_INIT)
+                printk(KERN_DEBUG "%s: done!\n", __func__);
+}
+
+static void
+release_card(struct hfc_multi *hc)
+{
+        u_long  flags;
+        int     ch;
+
+        if (debug & DEBUG_HFCMULTI_INIT)
+                printk(KERN_WARNING "%s: release card (%d) entered\n",
+                    __func__, hc->id);
+
+        spin_lock_irqsave(&hc->lock, flags);
+        disable_hwirq(hc);
+        spin_unlock_irqrestore(&hc->lock, flags);
+
+        udelay(1000);
+
+        /* dimm leds */
+        if (hc->leds)
+                hfcmulti_leds(hc);
+
+        /* disable D-channels & B-channels */
+        if (debug & DEBUG_HFCMULTI_INIT)
+                printk(KERN_DEBUG "%s: disable all channels (d and b)\n",
+                    __func__);
+        for (ch = 0; ch <= 31; ch++) {
+                if (hc->chan[ch].dch)
+                        release_port(hc, hc->chan[ch].dch);
+        }
+
+        /* release hardware & irq */
+        if (hc->irq) {
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_WARNING "%s: free irq %d\n",
+                            __func__, hc->irq);
+                free_irq(hc->irq, hc);
+                hc->irq = 0;
+
+        }
+        release_io_hfcmulti(hc);
+
+        if (debug & DEBUG_HFCMULTI_INIT)
+                printk(KERN_WARNING "%s: remove instance from list\n",
+                     __func__);
+        list_del(&hc->list);
+
+        if (debug & DEBUG_HFCMULTI_INIT)
+                printk(KERN_WARNING "%s: delete instance\n", __func__);
+        if (hc == syncmaster)
+                syncmaster = NULL;
+        kfree(hc);
+        if (debug & DEBUG_HFCMULTI_INIT)
+                printk(KERN_WARNING "%s: card successfully removed\n",
+                    __func__);
+}
+
+static int
+init_e1_port(struct hfc_multi *hc, struct hm_map *m)
+{
+        struct dchannel *dch;
+        struct bchannel *bch;
+        int             ch, ret = 0;
+        char            name[MISDN_MAX_IDLEN];
+
+        dch = kzalloc(sizeof(struct dchannel), GFP_KERNEL);
+        if (!dch)
+                return -ENOMEM;
+        dch->debug = debug;
+        mISDN_initdchannel(dch, MAX_DFRAME_LEN_L1, ph_state_change);
+        dch->hw = hc;
+        dch->dev.Dprotocols = (1 << ISDN_P_TE_E1) | (1 << ISDN_P_NT_E1);
+        dch->dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
+            (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
+        dch->dev.D.send = handle_dmsg;
+        dch->dev.D.ctrl = hfcm_dctrl;
+        dch->dev.nrbchan = (hc->dslot)?30:31;
+        dch->slot = hc->dslot;
+        hc->chan[hc->dslot].dch = dch;
+        hc->chan[hc->dslot].port = 0;
+        hc->chan[hc->dslot].nt_timer = -1;
+        for (ch = 1; ch <= 31; ch++) {
+                if (ch == hc->dslot) /* skip dchannel */
+                        continue;
+                bch = kzalloc(sizeof(struct bchannel), GFP_KERNEL);
+                if (!bch) {
+                        printk(KERN_ERR "%s: no memory for bchannel\n",
+                            __func__);
+                        ret = -ENOMEM;
+                        goto free_chan;
+                }
+                hc->chan[ch].coeff = kzalloc(512, GFP_KERNEL);
+                if (!hc->chan[ch].coeff) {
+                        printk(KERN_ERR "%s: no memory for coeffs\n",
+                            __func__);
+                        ret = -ENOMEM;
+                        goto free_chan;
+                }
+                bch->nr = ch;
+                bch->slot = ch;
+                bch->debug = debug;
+                mISDN_initbchannel(bch, MAX_DATA_MEM);
+                bch->hw = hc;
+                bch->ch.send = handle_bmsg;
+                bch->ch.ctrl = hfcm_bctrl;
+                bch->ch.nr = ch;
+                list_add(&bch->ch.list, &dch->dev.bchannels);
+                hc->chan[ch].bch = bch;
+                hc->chan[ch].port = 0;
+                test_and_set_bit(bch->nr, &dch->dev.channelmap[0]);
+        }
+        /* set optical line type */
+        if (port[Port_cnt] & 0x001) {
+                if (!m->opticalsupport)  {
+                        printk(KERN_INFO
+                            "This board has no optical "
+                            "support\n");
+                } else {
+                        if (debug & DEBUG_HFCMULTI_INIT)
+                                printk(KERN_DEBUG
+                                    "%s: PORT set optical "
+                                    "interfacs: card(%d) "
+                                    "port(%d)\n",
+                                    __func__,
+                                    HFC_cnt + 1, 1);
+                        test_and_set_bit(HFC_CFG_OPTICAL,
+                            &hc->chan[hc->dslot].cfg);
+                }
+        }
+        /* set LOS report */
+        if (port[Port_cnt] & 0x004) {
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_DEBUG "%s: PORT set "
+                            "LOS report: card(%d) port(%d)\n",
+                            __func__, HFC_cnt + 1, 1);
+                test_and_set_bit(HFC_CFG_REPORT_LOS,
+                    &hc->chan[hc->dslot].cfg);
+        }
+        /* set AIS report */
+        if (port[Port_cnt] & 0x008) {
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_DEBUG "%s: PORT set "
+                            "AIS report: card(%d) port(%d)\n",
+                            __func__, HFC_cnt + 1, 1);
+                test_and_set_bit(HFC_CFG_REPORT_AIS,
+                    &hc->chan[hc->dslot].cfg);
+        }
+        /* set SLIP report */
+        if (port[Port_cnt] & 0x010) {
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_DEBUG
+                            "%s: PORT set SLIP report: "
+                            "card(%d) port(%d)\n",
+                            __func__, HFC_cnt + 1, 1);
+                test_and_set_bit(HFC_CFG_REPORT_SLIP,
+                    &hc->chan[hc->dslot].cfg);
+        }
+        /* set RDI report */
+        if (port[Port_cnt] & 0x020) {
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_DEBUG
+                            "%s: PORT set RDI report: "
+                            "card(%d) port(%d)\n",
+                            __func__, HFC_cnt + 1, 1);
+                test_and_set_bit(HFC_CFG_REPORT_RDI,
+                    &hc->chan[hc->dslot].cfg);
+        }
+        /* set CRC-4 Mode */
+        if (!(port[Port_cnt] & 0x100)) {
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_DEBUG "%s: PORT turn on CRC4 report:"
+                                " card(%d) port(%d)\n",
+                                __func__, HFC_cnt + 1, 1);
+                test_and_set_bit(HFC_CFG_CRC4,
+                    &hc->chan[hc->dslot].cfg);
+        } else {
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_DEBUG "%s: PORT turn off CRC4"
+                                " report: card(%d) port(%d)\n",
+                                __func__, HFC_cnt + 1, 1);
+        }
+        /* set forced clock */
+        if (port[Port_cnt] & 0x0200) {
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_DEBUG "%s: PORT force getting clock from "
+                                "E1: card(%d) port(%d)\n",
+                                __func__, HFC_cnt + 1, 1);
+                test_and_set_bit(HFC_CHIP_E1CLOCK_GET, &hc->chip);
+        } else
+        if (port[Port_cnt] & 0x0400) {
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_DEBUG "%s: PORT force putting clock to "
+                                "E1: card(%d) port(%d)\n",
+                                __func__, HFC_cnt + 1, 1);
+                test_and_set_bit(HFC_CHIP_E1CLOCK_PUT, &hc->chip);
+        }
+        /* set JATT PLL */
+        if (port[Port_cnt] & 0x0800) {
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_DEBUG "%s: PORT disable JATT PLL on "
+                                "E1: card(%d) port(%d)\n",
+                                __func__, HFC_cnt + 1, 1);
+                test_and_set_bit(HFC_CHIP_RX_SYNC, &hc->chip);
+        }
+        /* set elastic jitter buffer */
+        if (port[Port_cnt] & 0x3000) {
+                hc->chan[hc->dslot].jitter = (port[Port_cnt]>>12) & 0x3;
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_DEBUG
+                            "%s: PORT set elastic "
+                            "buffer to %d: card(%d) port(%d)\n",
+                            __func__, hc->chan[hc->dslot].jitter,
+                            HFC_cnt + 1, 1);
+        } else
+                hc->chan[hc->dslot].jitter = 2; /* default */
+        snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-e1.%d", HFC_cnt + 1);
+        ret = mISDN_register_device(&dch->dev, name);
+        if (ret)
+                goto free_chan;
+        hc->created[0] = 1;
+        return ret;
+free_chan:
+        release_port(hc, dch);
+        return ret;
+}
+
+static int
+init_multi_port(struct hfc_multi *hc, int pt)
+{
+        struct dchannel *dch;
+        struct bchannel *bch;
+        int             ch, i, ret = 0;
+        char            name[MISDN_MAX_IDLEN];
+
+        dch = kzalloc(sizeof(struct dchannel), GFP_KERNEL);
+        if (!dch)
+                return -ENOMEM;
+        dch->debug = debug;
+        mISDN_initdchannel(dch, MAX_DFRAME_LEN_L1, ph_state_change);
+        dch->hw = hc;
+        dch->dev.Dprotocols = (1 << ISDN_P_TE_S0) | (1 << ISDN_P_NT_S0);
+        dch->dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
+            (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
+        dch->dev.D.send = handle_dmsg;
+        dch->dev.D.ctrl = hfcm_dctrl;
+        dch->dev.nrbchan = 2;
+        i = pt << 2;
+        dch->slot = i + 2;
+        hc->chan[i + 2].dch = dch;
+        hc->chan[i + 2].port = pt;
+        hc->chan[i + 2].nt_timer = -1;
+        for (ch = 0; ch < dch->dev.nrbchan; ch++) {
+                bch = kzalloc(sizeof(struct bchannel), GFP_KERNEL);
+                if (!bch) {
+                        printk(KERN_ERR "%s: no memory for bchannel\n",
+                            __func__);
+                        ret = -ENOMEM;
+                        goto free_chan;
+                }
+                hc->chan[i + ch].coeff = kzalloc(512, GFP_KERNEL);
+                if (!hc->chan[i + ch].coeff) {
+                        printk(KERN_ERR "%s: no memory for coeffs\n",
+                            __func__);
+                        ret = -ENOMEM;
+                        goto free_chan;
+                }
+                bch->nr = ch + 1;
+                bch->slot = i + ch;
+                bch->debug = debug;
+                mISDN_initbchannel(bch, MAX_DATA_MEM);
+                bch->hw = hc;
+                bch->ch.send = handle_bmsg;
+                bch->ch.ctrl = hfcm_bctrl;
+                bch->ch.nr = ch + 1;
+                list_add(&bch->ch.list, &dch->dev.bchannels);
+                hc->chan[i + ch].bch = bch;
+                hc->chan[i + ch].port = pt;
+                test_and_set_bit(bch->nr, &dch->dev.channelmap[0]);
+        }
+        /* set master clock */
+        if (port[Port_cnt] & 0x001) {
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_DEBUG
+                            "%s: PROTOCOL set master clock: "
+                            "card(%d) port(%d)\n",
+                            __func__, HFC_cnt + 1, pt + 1);
+                if (dch->dev.D.protocol != ISDN_P_TE_S0) {
+                        printk(KERN_ERR "Error: Master clock "
+                            "for port(%d) of card(%d) is only"
+                            " possible with TE-mode\n",
+                            pt + 1, HFC_cnt + 1);
+                        ret = -EINVAL;
+                        goto free_chan;
+                }
+                if (hc->masterclk >= 0) {
+                        printk(KERN_ERR "Error: Master clock "
+                            "for port(%d) of card(%d) already "
+                            "defined for port(%d)\n",
+                            pt + 1, HFC_cnt + 1, hc->masterclk+1);
+                        ret = -EINVAL;
+                        goto free_chan;
+                }
+                hc->masterclk = pt;
+        }
+        /* set transmitter line to non capacitive */
+        if (port[Port_cnt] & 0x002) {
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_DEBUG
+                            "%s: PROTOCOL set non capacitive "
+                            "transmitter: card(%d) port(%d)\n",
+                            __func__, HFC_cnt + 1, pt + 1);
+                test_and_set_bit(HFC_CFG_NONCAP_TX,
+                    &hc->chan[i + 2].cfg);
+        }
+        /* disable E-channel */
+        if (port[Port_cnt] & 0x004) {
+        if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_DEBUG
+                            "%s: PROTOCOL disable E-channel: "
+                            "card(%d) port(%d)\n",
+                            __func__, HFC_cnt + 1, pt + 1);
+                test_and_set_bit(HFC_CFG_DIS_ECHANNEL,
+                    &hc->chan[i + 2].cfg);
+        }
+        snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-%ds.%d/%d",
+                hc->type, HFC_cnt + 1, pt + 1);
+        ret = mISDN_register_device(&dch->dev, name);
+        if (ret)
+                goto free_chan;
+        hc->created[pt] = 1;
+        return ret;
+free_chan:
+        release_port(hc, dch);
+        return ret;
+}
+
+static int
+hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+        struct hm_map   *m = (struct hm_map *)ent->driver_data;
+        int             ret_err = 0;
+        int             pt;
+        struct hfc_multi        *hc;
+        u_long          flags;
+        u_char          dips = 0, pmj = 0; /* dip settings, port mode Jumpers */
+
+        if (HFC_cnt >= MAX_CARDS) {
+                printk(KERN_ERR "too many cards (max=%d).\n",
+                        MAX_CARDS);
+                return -EINVAL;
+        }
+        if ((type[HFC_cnt] & 0xff) && (type[HFC_cnt] & 0xff) != m->type) {
+                printk(KERN_WARNING "HFC-MULTI: Card '%s:%s' type %d found but "
+                    "type[%d] %d was supplied as module parameter\n",
+                    m->vendor_name, m->card_name, m->type, HFC_cnt,
+                    type[HFC_cnt] & 0xff);
+                printk(KERN_WARNING "HFC-MULTI: Load module without parameters "
+                        "first, to see cards and their types.");
+                return -EINVAL;
+        }
+        if (debug & DEBUG_HFCMULTI_INIT)
+                printk(KERN_DEBUG "%s: Registering %s:%s chip type %d (0x%x)\n",
+                    __func__, m->vendor_name, m->card_name, m->type,
+                    type[HFC_cnt]);
+
+        /* allocate card+fifo structure */
+        hc = kzalloc(sizeof(struct hfc_multi), GFP_KERNEL);
+        if (!hc) {
+                printk(KERN_ERR "No kmem for HFC-Multi card\n");
+                return -ENOMEM;
+        }
+        spin_lock_init(&hc->lock);
+        hc->mtyp = m;
+        hc->type =  m->type;
+        hc->ports = m->ports;
+        hc->id = HFC_cnt;
+        hc->pcm = pcm[HFC_cnt];
+        hc->io_mode = iomode[HFC_cnt];
+        if (dslot[HFC_cnt] < 0) {
+                hc->dslot = 0;
+                printk(KERN_INFO "HFC-E1 card has disabled D-channel, but "
+                        "31 B-channels\n");
+        } if (dslot[HFC_cnt] > 0 && dslot[HFC_cnt] < 32) {
+                hc->dslot = dslot[HFC_cnt];
+                printk(KERN_INFO "HFC-E1 card has alternating D-channel on "
+                        "time slot %d\n", dslot[HFC_cnt]);
+        } else
+                hc->dslot = 16;
+
+        /* set chip specific features */
+        hc->masterclk = -1;
+        if (type[HFC_cnt] & 0x100) {
+                test_and_set_bit(HFC_CHIP_ULAW, &hc->chip);
+                silence = 0xff; /* ulaw silence */
+        } else
+                silence = 0x2a; /* alaw silence */
+        if (!(type[HFC_cnt] & 0x200))
+                test_and_set_bit(HFC_CHIP_DTMF, &hc->chip);
+
+        if (type[HFC_cnt] & 0x800)
+                test_and_set_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
+        if (type[HFC_cnt] & 0x1000) {
+                test_and_set_bit(HFC_CHIP_PCM_MASTER, &hc->chip);
+                test_and_clear_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
+        }
+        if (type[HFC_cnt] & 0x4000)
+                test_and_set_bit(HFC_CHIP_EXRAM_128, &hc->chip);
+        if (type[HFC_cnt] & 0x8000)
+                test_and_set_bit(HFC_CHIP_EXRAM_512, &hc->chip);
+        hc->slots = 32;
+        if (type[HFC_cnt] & 0x10000)
+                hc->slots = 64;
+        if (type[HFC_cnt] & 0x20000)
+                hc->slots = 128;
+        if (type[HFC_cnt] & 0x80000) {
+                test_and_set_bit(HFC_CHIP_WATCHDOG, &hc->chip);
+                hc->wdcount = 0;
+                hc->wdbyte = V_GPIO_OUT2;
+                printk(KERN_NOTICE "Watchdog enabled\n");
+        }
+
+        /* setup pci, hc->slots may change due to PLXSD */
+        ret_err = setup_pci(hc, pdev, ent);
+        if (ret_err) {
+                if (hc == syncmaster)
+                        syncmaster = NULL;
+                kfree(hc);
+                return ret_err;
+        }
+
+        /* crate channels */
+        for (pt = 0; pt < hc->ports; pt++) {
+                if (Port_cnt >= MAX_PORTS) {
+                        printk(KERN_ERR "too many ports (max=%d).\n",
+                                MAX_PORTS);
+                        ret_err = -EINVAL;
+                        goto free_card;
+                }
+                if (hc->type == 1)
+                        ret_err = init_e1_port(hc, m);
+                else
+                        ret_err = init_multi_port(hc, pt);
+                if (debug & DEBUG_HFCMULTI_INIT)
+                        printk(KERN_DEBUG
+                            "%s: Registering D-channel, card(%d) port(%d)"
+                            "result %d\n",
+                            __func__, HFC_cnt + 1, pt, ret_err);
+
+                if (ret_err) {
+                        while (pt) { /* release already registered ports */
+                                pt--;
+                                release_port(hc, hc->chan[(pt << 2) + 2].dch);
+                        }
+                        goto free_card;
+                }
+                Port_cnt++;
+        }
+
+        /* disp switches */
+        switch (m->dip_type) {
+        case DIP_4S:
+                /*
+                 * get DIP Setting for beroNet 1S/2S/4S cards
+                 *  check if Port Jumper config matches
+                 * module param 'protocol'
+                 * DIP Setting: (collect GPIO 13/14/15 (R_GPIO_IN1) +
+                 * GPI 19/23 (R_GPI_IN2))
+                 */
+                dips = ((~HFC_inb(hc, R_GPIO_IN1) & 0xE0) >> 5) |
+                        ((~HFC_inb(hc, R_GPI_IN2) & 0x80) >> 3) |
+                        (~HFC_inb(hc, R_GPI_IN2) & 0x08);
+
+                /* Port mode (TE/NT) jumpers */
+                pmj = ((HFC_inb(hc, R_GPI_IN3) >> 4)  & 0xf);
+
+                if (test_bit(HFC_CHIP_B410P, &hc->chip))
+                        pmj = ~pmj & 0xf;
+
+                printk(KERN_INFO "%s: %s DIPs(0x%x) jumpers(0x%x)\n",
+                        m->vendor_name, m->card_name, dips, pmj);
+                break;
+        case DIP_8S:
+                /*
+                 * get DIP Setting for beroNet 8S0+ cards
+                 *
+                 * enable PCI auxbridge function
+                 */
+                HFC_outb(hc, R_BRG_PCM_CFG, 1 | V_PCM_CLK);
+                /* prepare access to auxport */
+                outw(0x4000, hc->pci_iobase + 4);
+                /*
+                 * some dummy reads are required to
+                 * read valid DIP switch data
+                 */
+                dips = inb(hc->pci_iobase);
+                dips = inb(hc->pci_iobase);
+                dips = inb(hc->pci_iobase);
+                dips = ~inb(hc->pci_iobase) & 0x3F;
+                outw(0x0, hc->pci_iobase + 4);
+                /* disable PCI auxbridge function */
+                HFC_outb(hc, R_BRG_PCM_CFG, V_PCM_CLK);
+                printk(KERN_INFO "%s: %s DIPs(0x%x)\n",
+                    m->vendor_name, m->card_name, dips);
+                break;
+        case DIP_E1:
+                /*
+                 * get DIP Setting for beroNet E1 cards
+                 * DIP Setting: collect GPI 4/5/6/7 (R_GPI_IN0)
+                 */
+                dips = (~HFC_inb(hc, R_GPI_IN0) & 0xF0)>>4;
+                printk(KERN_INFO "%s: %s DIPs(0x%x)\n",
+                    m->vendor_name, m->card_name, dips);
+                break;
+        }
+
+        /* add to list */
+        spin_lock_irqsave(&HFClock, flags);
+        list_add_tail(&hc->list, &HFClist);
+        spin_unlock_irqrestore(&HFClock, flags);
+
+        /* initialize hardware */
+        ret_err = init_card(hc);
+        if (ret_err) {
+                printk(KERN_ERR "init card returns %d\n", ret_err);
+                release_card(hc);
+                return ret_err;
+        }
+
+        /* start IRQ and return */
+        spin_lock_irqsave(&hc->lock, flags);
+        enable_hwirq(hc);
+        spin_unlock_irqrestore(&hc->lock, flags);
+        return 0;
+
+free_card:
+        release_io_hfcmulti(hc);
+        if (hc == syncmaster)
+                syncmaster = NULL;
+        kfree(hc);
+        return ret_err;
+}
+
+static void __devexit hfc_remove_pci(struct pci_dev *pdev)
+{
+        struct hfc_multi        *card = pci_get_drvdata(pdev);
+        u_long                  flags;
+
+        if (debug)
+                printk(KERN_INFO "removing hfc_multi card vendor:%x "
+                    "device:%x subvendor:%x subdevice:%x\n",
+                    pdev->vendor, pdev->device,
+                    pdev->subsystem_vendor, pdev->subsystem_device);
+
+        if (card) {
+                spin_lock_irqsave(&HFClock, flags);
+                release_card(card);
+                spin_unlock_irqrestore(&HFClock, flags);
+        }  else {
+                if (debug)
+                        printk(KERN_WARNING "%s: drvdata allready removed\n",
+                            __func__);
+        }
+}
+
+#define VENDOR_CCD      "Cologne Chip AG"
+#define VENDOR_BN       "beroNet GmbH"
+#define VENDOR_DIG      "Digium Inc."
+#define VENDOR_JH       "Junghanns.NET GmbH"
+#define VENDOR_PRIM     "PrimuX"
+
+static const struct hm_map hfcm_map[] = {
+/*0*/   {VENDOR_BN, "HFC-1S Card (mini PCI)", 4, 1, 1, 3, 0, DIP_4S, 0},
+/*1*/   {VENDOR_BN, "HFC-2S Card", 4, 2, 1, 3, 0, DIP_4S},
+/*2*/   {VENDOR_BN, "HFC-2S Card (mini PCI)", 4, 2, 1, 3, 0, DIP_4S, 0},
+/*3*/   {VENDOR_BN, "HFC-4S Card", 4, 4, 1, 2, 0, DIP_4S, 0},
+/*4*/   {VENDOR_BN, "HFC-4S Card (mini PCI)", 4, 4, 1, 2, 0, 0, 0},
+/*5*/   {VENDOR_CCD, "HFC-4S Eval (old)", 4, 4, 0, 0, 0, 0, 0},
+/*6*/   {VENDOR_CCD, "HFC-4S IOB4ST", 4, 4, 1, 2, 0, 0, 0},
+/*7*/   {VENDOR_CCD, "HFC-4S", 4, 4, 1, 2, 0, 0, 0},
+/*8*/   {VENDOR_DIG, "HFC-4S Card", 4, 4, 0, 2, 0, 0, HFC_IO_MODE_REGIO},
+/*9*/   {VENDOR_CCD, "HFC-4S Swyx 4xS0 SX2 QuadBri", 4, 4, 1, 2, 0, 0, 0},
+/*10*/  {VENDOR_JH, "HFC-4S (junghanns 2.0)", 4, 4, 1, 2, 0, 0, 0},
+/*11*/  {VENDOR_PRIM, "HFC-2S Primux Card", 4, 2, 0, 0, 0, 0, 0},
+
+/*12*/  {VENDOR_BN, "HFC-8S Card", 8, 8, 1, 0, 0, 0, 0},
+/*13*/  {VENDOR_BN, "HFC-8S Card (+)", 8, 8, 1, 8, 0, DIP_8S,
+                HFC_IO_MODE_REGIO},
+/*14*/  {VENDOR_CCD, "HFC-8S Eval (old)", 8, 8, 0, 0, 0, 0, 0},
+/*15*/  {VENDOR_CCD, "HFC-8S IOB4ST Recording", 8, 8, 1, 0, 0, 0, 0},
+
+/*16*/  {VENDOR_CCD, "HFC-8S IOB8ST", 8, 8, 1, 0, 0, 0, 0},
+/*17*/  {VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0},
+/*18*/  {VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0},
+
+/*19*/  {VENDOR_BN, "HFC-E1 Card", 1, 1, 0, 1, 0, DIP_E1, 0},
+/*20*/  {VENDOR_BN, "HFC-E1 Card (mini PCI)", 1, 1, 0, 1, 0, 0, 0},
+/*21*/  {VENDOR_BN, "HFC-E1+ Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0},
+/*22*/  {VENDOR_BN, "HFC-E1 Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0},
+
+/*23*/  {VENDOR_CCD, "HFC-E1 Eval (old)", 1, 1, 0, 0, 0, 0, 0},
+/*24*/  {VENDOR_CCD, "HFC-E1 IOB1E1", 1, 1, 0, 1, 0, 0, 0},
+/*25*/  {VENDOR_CCD, "HFC-E1", 1, 1, 0, 1, 0, 0, 0},
+
+/*26*/  {VENDOR_CCD, "HFC-4S Speech Design", 4, 4, 0, 0, 0, 0,
+                HFC_IO_MODE_PLXSD},
+/*27*/  {VENDOR_CCD, "HFC-E1 Speech Design", 1, 1, 0, 0, 0, 0,
+                HFC_IO_MODE_PLXSD},
+/*28*/  {VENDOR_CCD, "HFC-4S OpenVox", 4, 4, 1, 0, 0, 0, 0},
+/*29*/  {VENDOR_CCD, "HFC-2S OpenVox", 4, 2, 1, 0, 0, 0, 0},
+/*30*/  {VENDOR_CCD, "HFC-8S OpenVox", 8, 8, 1, 0, 0, 0, 0},
+};
+
+#undef H
+#define H(x)    ((unsigned long)&hfcm_map[x])
+static struct pci_device_id hfmultipci_ids[] __devinitdata = {
+
+        /* Cards with HFC-4S Chip */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+                PCI_SUBDEVICE_ID_CCD_BN1SM, 0, 0, H(0)}, /* BN1S mini PCI */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+                PCI_SUBDEVICE_ID_CCD_BN2S, 0, 0, H(1)}, /* BN2S */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+                PCI_SUBDEVICE_ID_CCD_BN2SM, 0, 0, H(2)}, /* BN2S mini PCI */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+                PCI_SUBDEVICE_ID_CCD_BN4S, 0, 0, H(3)}, /* BN4S */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+                PCI_SUBDEVICE_ID_CCD_BN4SM, 0, 0, H(4)}, /* BN4S mini PCI */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+                PCI_DEVICE_ID_CCD_HFC4S, 0, 0, H(5)}, /* Old Eval */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+                PCI_SUBDEVICE_ID_CCD_IOB4ST, 0, 0, H(6)}, /* IOB4ST */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+                PCI_SUBDEVICE_ID_CCD_HFC4S, 0, 0, H(7)}, /* 4S */
+        { PCI_VENDOR_ID_DIGIUM, PCI_DEVICE_ID_DIGIUM_HFC4S,
+                PCI_VENDOR_ID_DIGIUM, PCI_DEVICE_ID_DIGIUM_HFC4S, 0, 0, H(8)},
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+                PCI_SUBDEVICE_ID_CCD_SWYX4S, 0, 0, H(9)}, /* 4S Swyx */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+                PCI_SUBDEVICE_ID_CCD_JH4S20, 0, 0, H(10)},
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+                PCI_SUBDEVICE_ID_CCD_PMX2S, 0, 0, H(11)}, /* Primux */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+                PCI_SUBDEVICE_ID_CCD_OV4S, 0, 0, H(28)}, /* OpenVox 4 */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+                PCI_SUBDEVICE_ID_CCD_OV2S, 0, 0, H(29)}, /* OpenVox 2 */
+
+        /* Cards with HFC-8S Chip */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+        PCI_SUBDEVICE_ID_CCD_BN8S, 0, 0, H(12)}, /* BN8S */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+        PCI_SUBDEVICE_ID_CCD_BN8SP, 0, 0, H(13)}, /* BN8S+ */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+        PCI_DEVICE_ID_CCD_HFC8S, 0, 0, H(14)}, /* old Eval */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+        PCI_SUBDEVICE_ID_CCD_IOB8STR, 0, 0, H(15)},
+            /* IOB8ST Recording */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+                PCI_SUBDEVICE_ID_CCD_IOB8ST, 0, 0, H(16)}, /* IOB8ST  */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+                PCI_SUBDEVICE_ID_CCD_IOB8ST_1, 0, 0, H(17)}, /* IOB8ST  */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+                PCI_SUBDEVICE_ID_CCD_HFC8S, 0, 0, H(18)}, /* 8S */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+                PCI_SUBDEVICE_ID_CCD_OV8S, 0, 0, H(30)}, /* OpenVox 8 */
+
+
+        /* Cards with HFC-E1 Chip */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+                PCI_SUBDEVICE_ID_CCD_BNE1, 0, 0, H(19)}, /* BNE1 */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+                PCI_SUBDEVICE_ID_CCD_BNE1M, 0, 0, H(20)}, /* BNE1 mini PCI */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+                PCI_SUBDEVICE_ID_CCD_BNE1DP, 0, 0, H(21)}, /* BNE1 + (Dual) */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+                PCI_SUBDEVICE_ID_CCD_BNE1D, 0, 0, H(22)}, /* BNE1 (Dual) */
+
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+                PCI_DEVICE_ID_CCD_HFCE1, 0, 0, H(23)}, /* Old Eval */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+                PCI_SUBDEVICE_ID_CCD_IOB1E1, 0, 0, H(24)}, /* IOB1E1 */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+                PCI_SUBDEVICE_ID_CCD_HFCE1, 0, 0, H(25)}, /* E1 */
+
+        { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_CCD,
+                PCI_SUBDEVICE_ID_CCD_SPD4S, 0, 0, H(26)}, /* PLX PCI Bridge */
+        { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_CCD,
+                PCI_SUBDEVICE_ID_CCD_SPDE1, 0, 0, H(27)}, /* PLX PCI Bridge */
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_ANY_ID, PCI_ANY_ID,
+                0, 0, 0},
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_ANY_ID, PCI_ANY_ID,
+                0, 0, 0},
+        { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_ANY_ID, PCI_ANY_ID,
+                0, 0, 0},
+        {0, }
+};
+#undef H
+
+MODULE_DEVICE_TABLE(pci, hfmultipci_ids);
+
+static int
+hfcmulti_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+        struct hm_map   *m = (struct hm_map *)ent->driver_data;
+        int             ret;
+
+        if (m == NULL) {
+                if (ent->vendor == PCI_VENDOR_ID_CCD)
+                        if (ent->device == PCI_DEVICE_ID_CCD_HFC4S ||
+                            ent->device == PCI_DEVICE_ID_CCD_HFC8S ||
+                            ent->device == PCI_DEVICE_ID_CCD_HFCE1)
+                                printk(KERN_ERR
+                                    "unknown HFC multiport controller "
+                                    "(vendor:%x device:%x subvendor:%x "
+                                    "subdevice:%x) Please contact the "
+                                    "driver maintainer for support.\n",
+                                    ent->vendor, ent->device,
+                                    ent->subvendor, ent->subdevice);
+                return -ENODEV;
+        }
+        ret = hfcmulti_init(pdev, ent);
+        if (ret)
+                return ret;
+        HFC_cnt++;
+        printk(KERN_INFO "%d devices registered\n", HFC_cnt);
+        return 0;
+}
+
+static struct pci_driver hfcmultipci_driver = {
+        .name           = "hfc_multi",
+        .probe          = hfcmulti_probe,
+        .remove         = __devexit_p(hfc_remove_pci),
+        .id_table       = hfmultipci_ids,
+};
+
+static void __exit
+HFCmulti_cleanup(void)
+{
+        struct hfc_multi *card, *next;
+
+        /* unload interrupt function symbol */
+        if (hfc_interrupt)
+                symbol_put(ztdummy_extern_interrupt);
+        if (register_interrupt)
+                symbol_put(ztdummy_register_interrupt);
+        if (unregister_interrupt) {
+                if (interrupt_registered) {
+                        interrupt_registered = 0;
+                        unregister_interrupt();
+                }
+                symbol_put(ztdummy_unregister_interrupt);
+        }
+
+        list_for_each_entry_safe(card, next, &HFClist, list)
+                release_card(card);
+        /* get rid of all devices of this driver */
+        pci_unregister_driver(&hfcmultipci_driver);
+}
+
+static int __init
+HFCmulti_init(void)
+{
+        int err;
+
+#ifdef IRQ_DEBUG
+        printk(KERN_ERR "%s: IRQ_DEBUG IS ENABLED!\n", __func__);
+#endif
+
+        spin_lock_init(&HFClock);
+        spin_lock_init(&plx_lock);
+
+        if (debug & DEBUG_HFCMULTI_INIT)
+                printk(KERN_DEBUG "%s: init entered\n", __func__);
+
+#ifdef __BIG_ENDIAN
+#error "not running on big endian machines now"
+#endif
+        hfc_interrupt = symbol_get(ztdummy_extern_interrupt);
+        register_interrupt = symbol_get(ztdummy_register_interrupt);
+        unregister_interrupt = symbol_get(ztdummy_unregister_interrupt);
+        printk(KERN_INFO "mISDN: HFC-multi driver %s\n",
+            hfcmulti_revision);
+
+        switch (poll) {
+        case 0:
+                poll_timer = 6;
+                poll = 128;
+                break;
+                /*
+                 * wenn dieses break nochmal verschwindet,
+                 * gibt es heisse ohren :-)
+                 * "without the break you will get hot ears ???"
+                 */
+        case 8:
+                poll_timer = 2;
+                break;
+        case 16:
+                poll_timer = 3;
+                break;
+        case 32:
+                poll_timer = 4;
+                break;
+        case 64:
+                poll_timer = 5;
+                break;
+        case 128:
+                poll_timer = 6;
+                break;
+        case 256:
+                poll_timer = 7;
+                break;
+        default:
+                printk(KERN_ERR
+                    "%s: Wrong poll value (%d).\n", __func__, poll);
+                err = -EINVAL;
+                return err;
+
+        }
+
+        err = pci_register_driver(&hfcmultipci_driver);
+        if (err < 0) {
+                printk(KERN_ERR "error registering pci driver: %x\n", err);
+                if (hfc_interrupt)
+                        symbol_put(ztdummy_extern_interrupt);
+                if (register_interrupt)
+                        symbol_put(ztdummy_register_interrupt);
+                if (unregister_interrupt) {
+                        if (interrupt_registered) {
+                                interrupt_registered = 0;
+                                unregister_interrupt();
+                        }
+                        symbol_put(ztdummy_unregister_interrupt);
+                }
+                return err;
+        }
+        return 0;
+}
+
+
+module_init(HFCmulti_init);
+module_exit(HFCmulti_cleanup);