Input: remove now deprecated corgi_ts.c touchscreen driver

The corgi touchscreen is now deprecated in favour of the generic ads7846.c
driver. The noise reduction technique used in corgi_ts.c, which is to wait
till vsync before ADC sampling, is also integrated into ads7846 driver now.
Provided that the original driver is not generic and is difficult to maintain,
it will be removed now.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

3 files changed, 0 insertions, 402 deletions

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 8a8fa4d2d6a8..3d1ade2e5196 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -99,22 +99,6 @@ config TOUCHSCREEN_BITSY
           To compile this driver as a module, choose M here: the
           module will be called h3600_ts_input.
 
-config TOUCHSCREEN_CORGI
-        tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)"
-        depends on PXA_SHARPSL
-        select CORGI_SSP_DEPRECATED
-        help
-          Say Y here to enable the driver for the touchscreen on the
-          Sharp SL-C7xx and SL-Cxx00 series of PDAs.
-
-          If unsure, say N.
-
-          To compile this driver as a module, choose M here: the
-          module will be called corgi_ts.
-
-          NOTE: this driver is deprecated, try enable SPI and generic
-          ADS7846-based touchscreen driver.
-
 config TOUCHSCREEN_DA9034
         tristate "Touchscreen support for Dialog Semiconductor DA9034"
         depends on PMIC_DA903X
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 7fef7d5cca23..41145d074dec 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -12,7 +12,6 @@ obj-$(CONFIG_TOUCHSCREEN_AD7879)	+= ad7879.o
 obj-$(CONFIG_TOUCHSCREEN_ADS7846)       += ads7846.o
 obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC)  += atmel_tsadcc.o
 obj-$(CONFIG_TOUCHSCREEN_BITSY)         += h3600_ts_input.o
-obj-$(CONFIG_TOUCHSCREEN_CORGI)         += corgi_ts.o
 obj-$(CONFIG_TOUCHSCREEN_DYNAPRO)       += dynapro.o
 obj-$(CONFIG_TOUCHSCREEN_GUNZE)         += gunze.o
 obj-$(CONFIG_TOUCHSCREEN_EETI)          += eeti_ts.o
diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c
deleted file mode 100644
index 94a1919d439d..000000000000
--- a/drivers/input/touchscreen/corgi_ts.c
+++ /dev/null
@@ -1,385 +0,0 @@
-/*
- *  Touchscreen driver for Sharp SL-C7xx and SL-Cxx00 models
- *
- *  Copyright (c) 2004-2005 Richard Purdie
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/irq.h>
-
-#include <mach/sharpsl.h>
-#include <mach/hardware.h>
-#include <mach/pxa2xx-gpio.h>
-
-
-#define PWR_MODE_ACTIVE         0
-#define PWR_MODE_SUSPEND        1
-
-#define X_AXIS_MAX              3830
-#define X_AXIS_MIN              150
-#define Y_AXIS_MAX              3830
-#define Y_AXIS_MIN              190
-#define PRESSURE_MIN            0
-#define PRESSURE_MAX            15000
-
-struct ts_event {
-        short pressure;
-        short x;
-        short y;
-};
-
-struct corgi_ts {
-        struct input_dev *input;
-        struct timer_list timer;
-        struct ts_event tc;
-        int pendown;
-        int power_mode;
-        int irq_gpio;
-        struct corgits_machinfo *machinfo;
-};
-
-#ifdef CONFIG_PXA25x
-#define CCNT(a)         asm volatile ("mrc p14, 0, %0, C1, C0, 0" : "=r"(a))
-#define PMNC_GET(x)     asm volatile ("mrc p14, 0, %0, C0, C0, 0" : "=r"(x))
-#define PMNC_SET(x)     asm volatile ("mcr p14, 0, %0, C0, C0, 0" : : "r"(x))
-#endif
-#ifdef CONFIG_PXA27x
-#define CCNT(a)         asm volatile ("mrc p14, 0, %0, C1, C1, 0" : "=r"(a))
-#define PMNC_GET(x)     asm volatile ("mrc p14, 0, %0, C0, C1, 0" : "=r"(x))
-#define PMNC_SET(x)     asm volatile ("mcr p14, 0, %0, C0, C1, 0" : : "r"(x))
-#endif
-
-/* ADS7846 Touch Screen Controller bit definitions */
-#define ADSCTRL_PD0             (1u << 0)       /* PD0 */
-#define ADSCTRL_PD1             (1u << 1)       /* PD1 */
-#define ADSCTRL_DFR             (1u << 2)       /* SER/DFR */
-#define ADSCTRL_MOD             (1u << 3)       /* Mode */
-#define ADSCTRL_ADR_SH  4       /* Address setting */
-#define ADSCTRL_STS             (1u << 7)       /* Start Bit */
-
-/* External Functions */
-extern unsigned int get_clk_frequency_khz(int info);
-
-static unsigned long calc_waittime(struct corgi_ts *corgi_ts)
-{
-        unsigned long hsync_invperiod = corgi_ts->machinfo->get_hsync_invperiod();
-
-        if (hsync_invperiod)
-                return get_clk_frequency_khz(0)*1000/hsync_invperiod;
-        else
-                return 0;
-}
-
-static int sync_receive_data_send_cmd(struct corgi_ts *corgi_ts, int doRecive, int doSend,
-                unsigned int address, unsigned long wait_time)
-{
-        unsigned long timer1 = 0, timer2, pmnc = 0;
-        int pos = 0;
-
-        if (wait_time && doSend) {
-                PMNC_GET(pmnc);
-                if (!(pmnc & 0x01))
-                        PMNC_SET(0x01);
-
-                /* polling HSync */
-                corgi_ts->machinfo->wait_hsync();
-                /* get CCNT */
-                CCNT(timer1);
-        }
-
-        if (doRecive)
-                pos = corgi_ssp_ads7846_get();
-
-        if (doSend) {
-                int cmd = ADSCTRL_PD0 | ADSCTRL_PD1 | (address << ADSCTRL_ADR_SH) | ADSCTRL_STS;
-                /* dummy command */
-                corgi_ssp_ads7846_put(cmd);
-                corgi_ssp_ads7846_get();
-
-                if (wait_time) {
-                        /* Wait after HSync */
-                        CCNT(timer2);
-                        if (timer2-timer1 > wait_time) {
-                                /* too slow - timeout, try again */
-                                corgi_ts->machinfo->wait_hsync();
-                                /* get CCNT */
-                                CCNT(timer1);
-                                /* Wait after HSync */
-                                CCNT(timer2);
-                        }
-                        while (timer2 - timer1 < wait_time)
-                                CCNT(timer2);
-                }
-                corgi_ssp_ads7846_put(cmd);
-                if (wait_time && !(pmnc & 0x01))
-                        PMNC_SET(pmnc);
-        }
-        return pos;
-}
-
-static int read_xydata(struct corgi_ts *corgi_ts)
-{
-        unsigned int x, y, z1, z2;
-        unsigned long flags, wait_time;
-
-        /* critical section */
-        local_irq_save(flags);
-        corgi_ssp_ads7846_lock();
-        wait_time = calc_waittime(corgi_ts);
-
-        /* Y-axis */
-        sync_receive_data_send_cmd(corgi_ts, 0, 1, 1u, wait_time);
-
-        /* Y-axis */
-        sync_receive_data_send_cmd(corgi_ts, 1, 1, 1u, wait_time);
-
-        /* X-axis */
-        y = sync_receive_data_send_cmd(corgi_ts, 1, 1, 5u, wait_time);
-
-        /* Z1 */
-        x = sync_receive_data_send_cmd(corgi_ts, 1, 1, 3u, wait_time);
-
-        /* Z2 */
-        z1 = sync_receive_data_send_cmd(corgi_ts, 1, 1, 4u, wait_time);
-        z2 = sync_receive_data_send_cmd(corgi_ts, 1, 0, 4u, wait_time);
-
-        /* Power-Down Enable */
-        corgi_ssp_ads7846_put((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
-        corgi_ssp_ads7846_get();
-
-        corgi_ssp_ads7846_unlock();
-        local_irq_restore(flags);
-
-        if (x== 0 || y == 0 || z1 == 0 || (x * (z2 - z1) / z1) >= 15000) {
-                corgi_ts->tc.pressure = 0;
-                return 0;
-        }
-
-        corgi_ts->tc.x = x;
-        corgi_ts->tc.y = y;
-        corgi_ts->tc.pressure = (x * (z2 - z1)) / z1;
-        return 1;
-}
-
-static void new_data(struct corgi_ts *corgi_ts)
-{
-        struct input_dev *dev = corgi_ts->input;
-
-        if (corgi_ts->power_mode != PWR_MODE_ACTIVE)
-                return;
-
-        if (!corgi_ts->tc.pressure && corgi_ts->pendown == 0)
-                return;
-
-        input_report_abs(dev, ABS_X, corgi_ts->tc.x);
-        input_report_abs(dev, ABS_Y, corgi_ts->tc.y);
-        input_report_abs(dev, ABS_PRESSURE, corgi_ts->tc.pressure);
-        input_report_key(dev, BTN_TOUCH, corgi_ts->pendown);
-        input_sync(dev);
-}
-
-static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer)
-{
-        if ((GPLR(IRQ_TO_GPIO(corgi_ts->irq_gpio)) & GPIO_bit(IRQ_TO_GPIO(corgi_ts->irq_gpio))) == 0) {
-                /* Disable Interrupt */
-                set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_NONE);
-                if (read_xydata(corgi_ts)) {
-                        corgi_ts->pendown = 1;
-                        new_data(corgi_ts);
-                }
-                mod_timer(&corgi_ts->timer, jiffies + HZ / 100);
-        } else {
-                if (corgi_ts->pendown == 1 || corgi_ts->pendown == 2) {
-                        mod_timer(&corgi_ts->timer, jiffies + HZ / 100);
-                        corgi_ts->pendown++;
-                        return;
-                }
-
-                if (corgi_ts->pendown) {
-                        corgi_ts->tc.pressure = 0;
-                        new_data(corgi_ts);
-                }
-
-                /* Enable Falling Edge */
-                set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING);
-                corgi_ts->pendown = 0;
-        }
-}
-
-static void corgi_ts_timer(unsigned long data)
-{
-        struct corgi_ts *corgits_data = (struct corgi_ts *) data;
-
-        ts_interrupt_main(corgits_data, 1);
-}
-
-static irqreturn_t ts_interrupt(int irq, void *dev_id)
-{
-        struct corgi_ts *corgits_data = dev_id;
-
-        ts_interrupt_main(corgits_data, 0);
-        return IRQ_HANDLED;
-}
-
-#ifdef CONFIG_PM
-static int corgits_suspend(struct platform_device *dev, pm_message_t state)
-{
-        struct corgi_ts *corgi_ts = platform_get_drvdata(dev);
-
-        if (corgi_ts->pendown) {
-                del_timer_sync(&corgi_ts->timer);
-                corgi_ts->tc.pressure = 0;
-                new_data(corgi_ts);
-                corgi_ts->pendown = 0;
-        }
-        corgi_ts->power_mode = PWR_MODE_SUSPEND;
-
-        corgi_ssp_ads7846_putget((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
-
-        return 0;
-}
-
-static int corgits_resume(struct platform_device *dev)
-{
-        struct corgi_ts *corgi_ts = platform_get_drvdata(dev);
-
-        corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
-        /* Enable Falling Edge */
-        set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING);
-        corgi_ts->power_mode = PWR_MODE_ACTIVE;
-
-        return 0;
-}
-#else
-#define corgits_suspend         NULL
-#define corgits_resume          NULL
-#endif
-
-static int __devinit corgits_probe(struct platform_device *pdev)
-{
-        struct corgi_ts *corgi_ts;
-        struct input_dev *input_dev;
-        int err = -ENOMEM;
-
-        corgi_ts = kzalloc(sizeof(struct corgi_ts), GFP_KERNEL);
-        input_dev = input_allocate_device();
-        if (!corgi_ts || !input_dev)
-                goto fail1;
-
-        platform_set_drvdata(pdev, corgi_ts);
-
-        corgi_ts->machinfo = pdev->dev.platform_data;
-        corgi_ts->irq_gpio = platform_get_irq(pdev, 0);
-
-        if (corgi_ts->irq_gpio < 0) {
-                err = -ENODEV;
-                goto fail1;
-        }
-
-        corgi_ts->input = input_dev;
-
-        init_timer(&corgi_ts->timer);
-        corgi_ts->timer.data = (unsigned long) corgi_ts;
-        corgi_ts->timer.function = corgi_ts_timer;
-
-        input_dev->name = "Corgi Touchscreen";
-        input_dev->phys = "corgits/input0";
-        input_dev->id.bustype = BUS_HOST;
-        input_dev->id.vendor = 0x0001;
-        input_dev->id.product = 0x0002;
-        input_dev->id.version = 0x0100;
-        input_dev->dev.parent = &pdev->dev;
-
-        input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-        input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
-        input_set_abs_params(input_dev, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0);
-        input_set_abs_params(input_dev, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0);
-        input_set_abs_params(input_dev, ABS_PRESSURE, PRESSURE_MIN, PRESSURE_MAX, 0, 0);
-
-        pxa_gpio_mode(IRQ_TO_GPIO(corgi_ts->irq_gpio) | GPIO_IN);
-
-        /* Initiaize ADS7846 Difference Reference mode */
-        corgi_ssp_ads7846_putget((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
-        mdelay(5);
-        corgi_ssp_ads7846_putget((3u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
-        mdelay(5);
-        corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
-        mdelay(5);
-        corgi_ssp_ads7846_putget((5u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
-        mdelay(5);
-
-        if (request_irq(corgi_ts->irq_gpio, ts_interrupt, IRQF_DISABLED, "ts", corgi_ts)) {
-                err = -EBUSY;
-                goto fail1;
-        }
-
-        err = input_register_device(corgi_ts->input);
-        if (err)
-                goto fail2;
-
-        corgi_ts->power_mode = PWR_MODE_ACTIVE;
-
-        /* Enable Falling Edge */
-        set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING);
-
-        return 0;
-
- fail2: free_irq(corgi_ts->irq_gpio, corgi_ts);
- fail1: input_free_device(input_dev);
-        kfree(corgi_ts);
-        return err;
-}
-
-static int __devexit corgits_remove(struct platform_device *pdev)
-{
-        struct corgi_ts *corgi_ts = platform_get_drvdata(pdev);
-
-        free_irq(corgi_ts->irq_gpio, corgi_ts);
-        del_timer_sync(&corgi_ts->timer);
-        corgi_ts->machinfo->put_hsync();
-        input_unregister_device(corgi_ts->input);
-        kfree(corgi_ts);
-
-        return 0;
-}
-
-static struct platform_driver corgits_driver = {
-        .probe          = corgits_probe,
-        .remove         = __devexit_p(corgits_remove),
-        .suspend        = corgits_suspend,
-        .resume         = corgits_resume,
-        .driver         = {
-                .name   = "corgi-ts",
-                .owner  = THIS_MODULE,
-        },
-};
-
-static int __init corgits_init(void)
-{
-        return platform_driver_register(&corgits_driver);
-}
-
-static void __exit corgits_exit(void)
-{
-        platform_driver_unregister(&corgits_driver);
-}
-
-module_init(corgits_init);
-module_exit(corgits_exit);
-
-MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
-MODULE_DESCRIPTION("Corgi TouchScreen Driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:corgi-ts");