Merge branch 'wm97xx'

1 files changed, 48 insertions, 8 deletions

diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index 2910999e05a0..e9c7ea46b6e3 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -262,6 +262,23 @@ void wm97xx_config_gpio(struct wm97xx *wm, u32 gpio, enum wm97xx_gpio_dir dir,
 EXPORT_SYMBOL_GPL(wm97xx_config_gpio);
 
 /*
+ * Configure the WM97XX_PRP value to use while system is suspended.
+ * If a value other than 0 is set then WM97xx pen detection will be
+ * left enabled in the configured mode while the system is in suspend,
+ * the device has users and suspend has not been disabled via the
+ * wakeup sysfs entries.
+ *
+ * @wm:   WM97xx device to configure
+ * @mode: WM97XX_PRP value to configure while suspended
+ */
+void wm97xx_set_suspend_mode(struct wm97xx *wm, u16 mode)
+{
+        wm->suspend_mode = mode;
+        device_init_wakeup(&wm->input_dev->dev, mode != 0);
+}
+EXPORT_SYMBOL_GPL(wm97xx_set_suspend_mode);
+
+/*
  * Handle a pen down interrupt.
  */
 static void wm97xx_pen_irq_worker(struct work_struct *work)
@@ -328,18 +345,18 @@ static void wm97xx_pen_irq_worker(struct work_struct *work)
  *
  * We have to disable the codec interrupt in the handler because it
  * can take upto 1ms to clear the interrupt source. We schedule a task
- * in a work queue to do the actual interaction with the chip (it
- * doesn't matter if we end up reenqueing it before it is executed
- * since we don't touch the chip until it has run).  The interrupt is
- * then enabled again in the slow handler when the source has been
- * cleared.
+ * in a work queue to do the actual interaction with the chip.  The
+ * interrupt is then enabled again in the slow handler when the source
+ * has been cleared.
  */
 static irqreturn_t wm97xx_pen_interrupt(int irq, void *dev_id)
 {
         struct wm97xx *wm = dev_id;
 
-        wm->mach_ops->irq_enable(wm, 0);
-        queue_work(wm->ts_workq, &wm->pen_event_work);
+        if (!work_pending(&wm->pen_event_work)) {
+                wm->mach_ops->irq_enable(wm, 0);
+                queue_work(wm->ts_workq, &wm->pen_event_work);
+        }
 
         return IRQ_HANDLED;
 }
@@ -355,7 +372,8 @@ static int wm97xx_init_pen_irq(struct wm97xx *wm)
          * provided. */
         BUG_ON(!wm->mach_ops->irq_enable);
 
-        if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED,
+        if (request_irq(wm->pen_irq, wm97xx_pen_interrupt,
+                        IRQF_SHARED | IRQF_SAMPLE_RANDOM,
                         "wm97xx-pen", wm)) {
                 dev_err(wm->dev,
                         "Failed to register pen down interrupt, polling");
@@ -688,10 +706,32 @@ static int wm97xx_remove(struct device *dev)
 static int wm97xx_suspend(struct device *dev, pm_message_t state)
 {
         struct wm97xx *wm = dev_get_drvdata(dev);
+        u16 reg;
+        int suspend_mode;
+
+        if (device_may_wakeup(&wm->input_dev->dev))
+                suspend_mode = wm->suspend_mode;
+        else
+                suspend_mode = 0;
 
         if (wm->input_dev->users)
                 cancel_delayed_work_sync(&wm->ts_reader);
 
+        /* Power down the digitiser (bypassing the cache for resume) */
+        reg = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER2);
+        reg &= ~WM97XX_PRP_DET_DIG;
+        if (wm->input_dev->users)
+                reg |= suspend_mode;
+        wm->ac97->bus->ops->write(wm->ac97, AC97_WM97XX_DIGITISER2, reg);
+
+        /* WM9713 has an additional power bit - turn it off if there
+         * are no users or if suspend mode is zero. */
+        if (wm->id == WM9713_ID2 &&
+            (!wm->input_dev->users || !suspend_mode)) {
+                reg = wm97xx_reg_read(wm, AC97_EXTENDED_MID) | 0x8000;
+                wm97xx_reg_write(wm, AC97_EXTENDED_MID, reg);
+        }
+
         return 0;
 }