Input: WM97xx - add chip driver for WM97123 touchscreen

Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Mike Arthur <mike.arthur@wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Lars Munch <lars@segv.dk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

3 files changed, 470 insertions, 0 deletions

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 240e441c118a..f6e8dad9726b 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -217,6 +217,15 @@ config TOUCHSCREEN_WM9712
 
           If unsure, say N.
 
+config TOUCHSCREEN_WM9713
+        bool "WM9713 Touchscreen interface support"
+        depends on TOUCHSCREEN_WM97XX
+        help
+          Say Y here if you have a Wolfson Microelectronics WM9713 touchscreen
+          controller connected to your system.
+
+          If unsure, say N.
+
 config TOUCHSCREEN_USB_COMPOSITE
         tristate "USB Touchscreen Driver"
         depends on USB_ARCH_HAS_HCD
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index eb57f66e57f3..f1bc82941cc6 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -24,3 +24,4 @@ obj-$(CONFIG_TOUCHSCREEN_UCB1400)	+= ucb1400_ts.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX)        += wm97xx-ts.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705)  += wm9705.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712)  += wm9712.o
+wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713)  += wm9713.o
diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c
new file mode 100644
index 000000000000..01278bd7e65c
--- /dev/null
+++ b/drivers/input/touchscreen/wm9713.c
@@ -0,0 +1,460 @@
+/*
+ * wm9713.c  --  Codec touch driver for Wolfson WM9713 AC97 Codec.
+ *
+ * Copyright 2003, 2004, 2005, 2006, 2007, 2008 Wolfson Microelectronics PLC.
+ * Author: Liam Girdwood
+ *         liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
+ * Parts Copyright : Ian Molton <spyro@f2s.com>
+ *                   Andrew Zabolotny <zap@homelink.ru>
+ *                   Russell King <rmk@arm.linux.org.uk>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/wm97xx.h>
+
+#define TS_NAME                 "wm97xx"
+#define WM9713_VERSION          "1.00"
+#define DEFAULT_PRESSURE        0xb0c0
+
+/*
+ * Module parameters
+ */
+
+/*
+ * Set internal pull up for pen detect.
+ *
+ * Pull up is in the range 1.02k (least sensitive) to 64k (most sensitive)
+ * i.e. pull up resistance = 64k Ohms / rpu.
+ *
+ * Adjust this value if you are having problems with pen detect not
+ * detecting any down event.
+ */
+static int rpu = 8;
+module_param(rpu, int, 0);
+MODULE_PARM_DESC(rpu, "Set internal pull up resitor for pen detect.");
+
+/*
+ * Set current used for pressure measurement.
+ *
+ * Set pil = 2 to use 400uA
+ *     pil = 1 to use 200uA and
+ *     pil = 0 to disable pressure measurement.
+ *
+ * This is used to increase the range of values returned by the adc
+ * when measureing touchpanel pressure.
+ */
+static int pil;
+module_param(pil, int, 0);
+MODULE_PARM_DESC(pil, "Set current used for pressure measurement.");
+
+/*
+ * Set threshold for pressure measurement.
+ *
+ * Pen down pressure below threshold is ignored.
+ */
+static int pressure = DEFAULT_PRESSURE & 0xfff;
+module_param(pressure, int, 0);
+MODULE_PARM_DESC(pressure, "Set threshold for pressure measurement.");
+
+/*
+ * Set adc sample delay.
+ *
+ * For accurate touchpanel measurements, some settling time may be
+ * required between the switch matrix applying a voltage across the
+ * touchpanel plate and the ADC sampling the signal.
+ *
+ * This delay can be set by setting delay = n, where n is the array
+ * position of the delay in the array delay_table below.
+ * Long delays > 1ms are supported for completeness, but are not
+ * recommended.
+ */
+static int delay = 4;
+module_param(delay, int, 0);
+MODULE_PARM_DESC(delay, "Set adc sample delay.");
+
+/*
+ * Set adc mask function.
+ *
+ * Sources of glitch noise, such as signals driving an LCD display, may feed
+ * through to the touch screen plates and affect measurement accuracy. In
+ * order to minimise this, a signal may be applied to the MASK pin to delay or
+ * synchronise the sampling.
+ *
+ * 0 = No delay or sync
+ * 1 = High on pin stops conversions
+ * 2 = Edge triggered, edge on pin delays conversion by delay param (above)
+ * 3 = Edge triggered, edge on pin starts conversion after delay param
+ */
+static int mask;
+module_param(mask, int, 0);
+MODULE_PARM_DESC(mask, "Set adc mask function.");
+
+/*
+ * Coordinate Polling Enable.
+ *
+ * Set to 1 to enable coordinate polling. e.g. x,y[,p] is sampled together
+ * for every poll.
+ */
+static int coord;
+module_param(coord, int, 0);
+MODULE_PARM_DESC(coord, "Polling coordinate mode");
+
+/*
+ * ADC sample delay times in uS
+ */
+static const int delay_table[] = {
+        21,    /* 1 AC97 Link frames */
+        42,    /* 2 */
+        84,    /* 4 */
+        167,   /* 8 */
+        333,   /* 16 */
+        667,   /* 32 */
+        1000,  /* 48 */
+        1333,  /* 64 */
+        2000,  /* 96 */
+        2667,  /* 128 */
+        3333,  /* 160 */
+        4000,  /* 192 */
+        4667,  /* 224 */
+        5333,  /* 256 */
+        6000,  /* 288 */
+        0      /* No delay, switch matrix always on */
+};
+
+/*
+ * Delay after issuing a POLL command.
+ *
+ * The delay is 3 AC97 link frames + the touchpanel settling delay
+ */
+static inline void poll_delay(int d)
+{
+        udelay(3 * AC97_LINK_FRAME + delay_table[d]);
+}
+
+/*
+ * set up the physical settings of the WM9713
+ */
+static void wm9713_phy_init(struct wm97xx *wm)
+{
+        u16 dig1 = 0, dig2, dig3;
+
+        /* default values */
+        dig2 = WM97XX_DELAY(4) | WM97XX_SLT(5);
+        dig3 = WM9712_RPU(1);
+
+        /* rpu */
+        if (rpu) {
+                dig3 &= 0xffc0;
+                dig3 |= WM9712_RPU(rpu);
+                dev_info(wm->dev, "setting pen detect pull-up to %d Ohms\n",
+                         64000 / rpu);
+        }
+
+        /* touchpanel pressure */
+        if (pil == 2) {
+                dig3 |= WM9712_PIL;
+                dev_info(wm->dev,
+                         "setting pressure measurement current to 400uA.");
+        } else if (pil)
+                dev_info(wm->dev,
+                         "setting pressure measurement current to 200uA.");
+        if (!pil)
+                pressure = 0;
+
+        /* sample settling delay */
+        if (delay < 0 || delay > 15) {
+                dev_info(wm->dev, "supplied delay out of range.");
+                delay = 4;
+                dev_info(wm->dev, "setting adc sample delay to %d u Secs.",
+                         delay_table[delay]);
+        }
+        dig2 &= 0xff0f;
+        dig2 |= WM97XX_DELAY(delay);
+
+        /* mask */
+        dig3 |= ((mask & 0x3) << 4);
+        if (coord)
+                dig3 |= WM9713_WAIT;
+
+        wm->misc = wm97xx_reg_read(wm, 0x5a);
+
+        wm97xx_reg_write(wm, AC97_WM9713_DIG1, dig1);
+        wm97xx_reg_write(wm, AC97_WM9713_DIG2, dig2);
+        wm97xx_reg_write(wm, AC97_WM9713_DIG3, dig3);
+        wm97xx_reg_write(wm, AC97_GPIO_STICKY, 0x0);
+}
+
+static void wm9713_dig_enable(struct wm97xx *wm, int enable)
+{
+        u16 val;
+
+        if (enable) {
+                val = wm97xx_reg_read(wm, AC97_EXTENDED_MID);
+                wm97xx_reg_write(wm, AC97_EXTENDED_MID, val & 0x7fff);
+                wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig[2] |
+                                 WM97XX_PRP_DET_DIG);
+                wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); /* dummy read */
+        } else {
+                wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig[2] &
+                                        ~WM97XX_PRP_DET_DIG);
+                val = wm97xx_reg_read(wm, AC97_EXTENDED_MID);
+                wm97xx_reg_write(wm, AC97_EXTENDED_MID, val | 0x8000);
+        }
+}
+
+static void wm9713_dig_restore(struct wm97xx *wm)
+{
+        wm97xx_reg_write(wm, AC97_WM9713_DIG1, wm->dig_save[0]);
+        wm97xx_reg_write(wm, AC97_WM9713_DIG2, wm->dig_save[1]);
+        wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig_save[2]);
+}
+
+static void wm9713_aux_prepare(struct wm97xx *wm)
+{
+        memcpy(wm->dig_save, wm->dig, sizeof(wm->dig));
+        wm97xx_reg_write(wm, AC97_WM9713_DIG1, 0);
+        wm97xx_reg_write(wm, AC97_WM9713_DIG2, 0);
+        wm97xx_reg_write(wm, AC97_WM9713_DIG3, WM97XX_PRP_DET_DIG);
+}
+
+static inline int is_pden(struct wm97xx *wm)
+{
+        return wm->dig[2] & WM9713_PDEN;
+}
+
+/*
+ * Read a sample from the WM9713 adc in polling mode.
+ */
+static int wm9713_poll_sample(struct wm97xx *wm, int adcsel, int *sample)
+{
+        u16 dig1;
+        int timeout = 5 * delay;
+
+        if (!wm->pen_probably_down) {
+                u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+                if (!(data & WM97XX_PEN_DOWN))
+                        return RC_PENUP;
+                wm->pen_probably_down = 1;
+        }
+
+        /* set up digitiser */
+        if (adcsel & 0x8000)
+                adcsel = 1 << ((adcsel & 0x7fff) + 3);
+
+        dig1 = wm97xx_reg_read(wm, AC97_WM9713_DIG1);
+        dig1 &= ~WM9713_ADCSEL_MASK;
+
+        if (wm->mach_ops && wm->mach_ops->pre_sample)
+                wm->mach_ops->pre_sample(adcsel);
+        wm97xx_reg_write(wm, AC97_WM9713_DIG1, dig1 | adcsel | WM9713_POLL);
+
+        /* wait 3 AC97 time slots + delay for conversion */
+        poll_delay(delay);
+
+        /* wait for POLL to go low */
+        while ((wm97xx_reg_read(wm, AC97_WM9713_DIG1) & WM9713_POLL) &&
+                timeout) {
+                udelay(AC97_LINK_FRAME);
+                timeout--;
+        }
+
+        if (timeout <= 0) {
+                /* If PDEN is set, we can get a timeout when pen goes up */
+                if (is_pden(wm))
+                        wm->pen_probably_down = 0;
+                else
+                        dev_dbg(wm->dev, "adc sample timeout");
+                return RC_PENUP;
+        }
+
+        *sample = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+        if (wm->mach_ops && wm->mach_ops->post_sample)
+                wm->mach_ops->post_sample(adcsel);
+
+        /* check we have correct sample */
+        if ((*sample & WM97XX_ADCSRC_MASK) != ffs(adcsel >> 1) << 12) {
+                dev_dbg(wm->dev, "adc wrong sample, read %x got %x", adcsel,
+                        *sample & WM97XX_ADCSRC_MASK);
+                return RC_PENUP;
+        }
+
+        if (!(*sample & WM97XX_PEN_DOWN)) {
+                wm->pen_probably_down = 0;
+                return RC_PENUP;
+        }
+
+        return RC_VALID;
+}
+
+/*
+ * Read a coordinate from the WM9713 adc in polling mode.
+ */
+static int wm9713_poll_coord(struct wm97xx *wm, struct wm97xx_data *data)
+{
+        u16 dig1;
+        int timeout = 5 * delay;
+
+        if (!wm->pen_probably_down) {
+                u16 val = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+                if (!(val & WM97XX_PEN_DOWN))
+                        return RC_PENUP;
+                wm->pen_probably_down = 1;
+        }
+
+        /* set up digitiser */
+        dig1 = wm97xx_reg_read(wm, AC97_WM9713_DIG1);
+        dig1 &= ~WM9713_ADCSEL_MASK;
+        if (pil)
+                dig1 |= WM9713_ADCSEL_PRES;
+
+        if (wm->mach_ops && wm->mach_ops->pre_sample)
+                wm->mach_ops->pre_sample(WM97XX_ADCSEL_X | WM97XX_ADCSEL_Y);
+        wm97xx_reg_write(wm, AC97_WM9713_DIG1,
+                         dig1 | WM9713_POLL | WM9713_COO);
+
+        /* wait 3 AC97 time slots + delay for conversion */
+        poll_delay(delay);
+        data->x = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+        /* wait for POLL to go low */
+        while ((wm97xx_reg_read(wm, AC97_WM9713_DIG1) & WM9713_POLL)
+               && timeout) {
+                udelay(AC97_LINK_FRAME);
+                timeout--;
+        }
+
+        if (timeout <= 0) {
+                /* If PDEN is set, we can get a timeout when pen goes up */
+                if (is_pden(wm))
+                        wm->pen_probably_down = 0;
+                else
+                        dev_dbg(wm->dev, "adc sample timeout");
+                return RC_PENUP;
+        }
+
+        /* read back data */
+        data->y = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+        if (pil)
+                data->p = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+        else
+                data->p = DEFAULT_PRESSURE;
+
+        if (wm->mach_ops && wm->mach_ops->post_sample)
+                wm->mach_ops->post_sample(WM97XX_ADCSEL_X | WM97XX_ADCSEL_Y);
+
+        /* check we have correct sample */
+        if (!(data->x & WM97XX_ADCSEL_X) || !(data->y & WM97XX_ADCSEL_Y))
+                goto err;
+        if (pil && !(data->p & WM97XX_ADCSEL_PRES))
+                goto err;
+
+        if (!(data->x & WM97XX_PEN_DOWN) || !(data->y & WM97XX_PEN_DOWN)) {
+                wm->pen_probably_down = 0;
+                return RC_PENUP;
+        }
+        return RC_VALID;
+err:
+        return 0;
+}
+
+/*
+ * Sample the WM9713 touchscreen in polling mode
+ */
+static int wm9713_poll_touch(struct wm97xx *wm, struct wm97xx_data *data)
+{
+        int rc;
+
+        if (coord) {
+                rc = wm9713_poll_coord(wm, data);
+                if (rc != RC_VALID)
+                        return rc;
+        } else {
+                rc = wm9713_poll_sample(wm, WM9713_ADCSEL_X, &data->x);
+                if (rc != RC_VALID)
+                        return rc;
+                rc = wm9713_poll_sample(wm, WM9713_ADCSEL_Y, &data->y);
+                if (rc != RC_VALID)
+                        return rc;
+                if (pil) {
+                        rc = wm9713_poll_sample(wm, WM9713_ADCSEL_PRES,
+                                                &data->p);
+                        if (rc != RC_VALID)
+                                return rc;
+                } else
+                        data->p = DEFAULT_PRESSURE;
+        }
+        return RC_VALID;
+}
+
+/*
+ * Enable WM9713 continuous mode, i.e. touch data is streamed across
+ * an AC97 slot
+ */
+static int wm9713_acc_enable(struct wm97xx *wm, int enable)
+{
+        u16 dig1, dig2, dig3;
+        int ret = 0;
+
+        dig1 = wm->dig[0];
+        dig2 = wm->dig[1];
+        dig3 = wm->dig[2];
+
+        if (enable) {
+                /* continous mode */
+                if (wm->mach_ops->acc_startup &&
+                        (ret = wm->mach_ops->acc_startup(wm)) < 0)
+                        return ret;
+
+                dig1 &= ~WM9713_ADCSEL_MASK;
+                dig1 |= WM9713_CTC | WM9713_COO | WM9713_ADCSEL_X |
+                        WM9713_ADCSEL_Y;
+                if (pil)
+                        dig1 |= WM9713_ADCSEL_PRES;
+                dig2 &= ~(WM97XX_DELAY_MASK | WM97XX_SLT_MASK  |
+                        WM97XX_CM_RATE_MASK);
+                dig2 |= WM97XX_SLEN | WM97XX_DELAY(delay) |
+                WM97XX_SLT(wm->acc_slot) | WM97XX_RATE(wm->acc_rate);
+                dig3 |= WM9713_PDEN;
+        } else {
+                dig1 &= ~(WM9713_CTC | WM9713_COO);
+                dig2 &= ~WM97XX_SLEN;
+                dig3 &= ~WM9713_PDEN;
+                if (wm->mach_ops->acc_shutdown)
+                        wm->mach_ops->acc_shutdown(wm);
+        }
+
+        wm97xx_reg_write(wm, AC97_WM9713_DIG1, dig1);
+        wm97xx_reg_write(wm, AC97_WM9713_DIG2, dig2);
+        wm97xx_reg_write(wm, AC97_WM9713_DIG3, dig3);
+
+        return ret;
+}
+
+struct wm97xx_codec_drv wm9713_codec = {
+        .id = WM9713_ID2,
+        .name = "wm9713",
+        .poll_sample = wm9713_poll_sample,
+        .poll_touch = wm9713_poll_touch,
+        .acc_enable = wm9713_acc_enable,
+        .phy_init = wm9713_phy_init,
+        .dig_enable = wm9713_dig_enable,
+        .dig_restore = wm9713_dig_restore,
+        .aux_prepare = wm9713_aux_prepare,
+};
+EXPORT_SYMBOL_GPL(wm9713_codec);
+
+/* Module information */
+MODULE_AUTHOR("Liam Girdwood <liam.girdwood@wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM9713 Touch Screen Driver");
+MODULE_LICENSE("GPL");