Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: matrix_keypad - increase the limit of rows and columns
  Input: wacom - fix error path in wacom_probe()
  Input: ads7846 - check proper condition when freeing gpio
  Revert "Input: do not pass injected events back to the originating handler"
  Input: sysrq - rework re-inject logic
  Input: serio - clear pending rescans after sysfs driver rebind
  Input: rotary_encoder - use proper irqflags
  Input: wacom_w8001 - report resolution to userland

2 files changed, 33 insertions, 18 deletions

diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 14ea54b78e46..4bf2316e3284 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -941,28 +941,29 @@ static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads784
         struct ads7846_platform_data *pdata = spi->dev.platform_data;
         int err;
 
-        /* REVISIT when the irq can be triggered active-low, or if for some
+        /*
+         * REVISIT when the irq can be triggered active-low, or if for some
          * reason the touchscreen isn't hooked up, we don't need to access
          * the pendown state.
          */
-        if (!pdata->get_pendown_state && !gpio_is_valid(pdata->gpio_pendown)) {
-                dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
-                return -EINVAL;
-        }
 
         if (pdata->get_pendown_state) {
                 ts->get_pendown_state = pdata->get_pendown_state;
-                return 0;
-        }
+        } else if (gpio_is_valid(pdata->gpio_pendown)) {
 
-        err = gpio_request(pdata->gpio_pendown, "ads7846_pendown");
-        if (err) {
-                dev_err(&spi->dev, "failed to request pendown GPIO%d\n",
-                        pdata->gpio_pendown);
-                return err;
-        }
+                err = gpio_request(pdata->gpio_pendown, "ads7846_pendown");
+                if (err) {
+                        dev_err(&spi->dev, "failed to request pendown GPIO%d\n",
+                                pdata->gpio_pendown);
+                        return err;
+                }
 
-        ts->gpio_pendown = pdata->gpio_pendown;
+                ts->gpio_pendown = pdata->gpio_pendown;
+
+        } else {
+                dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
+                return -EINVAL;
+        }
 
         return 0;
 }
@@ -1353,7 +1354,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
  err_put_regulator:
         regulator_put(ts->reg);
  err_free_gpio:
-        if (ts->gpio_pendown != -1)
+        if (!ts->get_pendown_state)
                 gpio_free(ts->gpio_pendown);
  err_cleanup_filter:
         if (ts->filter_cleanup)
@@ -1383,8 +1384,13 @@ static int __devexit ads7846_remove(struct spi_device *spi)
         regulator_disable(ts->reg);
         regulator_put(ts->reg);
 
-        if (ts->gpio_pendown != -1)
+        if (!ts->get_pendown_state) {
+                /*
+                 * If we are not using specialized pendown method we must
+                 * have been relying on gpio we set up ourselves.
+                 */
                 gpio_free(ts->gpio_pendown);
+        }
 
         if (ts->filter_cleanup)
                 ts->filter_cleanup(ts->filter_data);
diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c
index 5cb8449c909d..c14412ef4648 100644
--- a/drivers/input/touchscreen/wacom_w8001.c
+++ b/drivers/input/touchscreen/wacom_w8001.c
@@ -51,6 +51,10 @@ MODULE_LICENSE("GPL");
 #define W8001_PKTLEN_TPCCTL     11      /* control packet */
 #define W8001_PKTLEN_TOUCH2FG   13
 
+/* resolution in points/mm */
+#define W8001_PEN_RESOLUTION    100
+#define W8001_TOUCH_RESOLUTION  10
+
 struct w8001_coord {
         u8 rdy;
         u8 tsw;
@@ -198,7 +202,7 @@ static void parse_touchquery(u8 *data, struct w8001_touch_query *query)
                 query->y = 1024;
                 if (query->panel_res)
                         query->x = query->y = (1 << query->panel_res);
-                query->panel_res = 10;
+                query->panel_res = W8001_TOUCH_RESOLUTION;
         }
 }
 
@@ -394,6 +398,8 @@ static int w8001_setup(struct w8001 *w8001)
 
                 input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
                 input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
+                input_abs_set_res(dev, ABS_X, W8001_PEN_RESOLUTION);
+                input_abs_set_res(dev, ABS_Y, W8001_PEN_RESOLUTION);
                 input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0);
                 if (coord.tilt_x && coord.tilt_y) {
                         input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
@@ -418,14 +424,17 @@ static int w8001_setup(struct w8001 *w8001)
                 w8001->max_touch_x = touch.x;
                 w8001->max_touch_y = touch.y;
 
-                /* scale to pen maximum */
                 if (w8001->max_pen_x && w8001->max_pen_y) {
+                        /* if pen is supported scale to pen maximum */
                         touch.x = w8001->max_pen_x;
                         touch.y = w8001->max_pen_y;
+                        touch.panel_res = W8001_PEN_RESOLUTION;
                 }
 
                 input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0);
                 input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0);
+                input_abs_set_res(dev, ABS_X, touch.panel_res);
+                input_abs_set_res(dev, ABS_Y, touch.panel_res);
 
                 switch (touch.sensor_id) {
                 case 0: